I am a USMC Recon Marine Veteran. I am a Jeep enthusiast, who loves building and wheeling, and the great camaraderie that comes from enjoying this sport with like minded people! Semper Fi
Glad Duane was safe. That could have been much worse! Keep on truckin’!
@JK_Joyride3 күн бұрын
Nice job boys! Looks like a fun trail. Wish we were there with you.
@jcmedalla20074 күн бұрын
this video is a year ago,i hope those bad batches are gone i was thinking getting a whole set for my 15 ram 3500,just imagining if i get the bad ones and run into trouble like the video mentioned i will be totally devastated,i dont have a back up work truck,my supposed to be application for those ball joints are for my welding rig,my truck carries a lot of weight aside from its factory weight,i dont know probley would just go oem way.🤔
@reconjeeper03214 күн бұрын
@@jcmedalla2007 yes hard to say? I’d like you to think they have worked out the bugs? But don’t know for sure… this was an honest review from my friend Mike and what he went through! Good luck!👍🏻🇺🇸
@JeepTJay65 күн бұрын
Any issues with your AC now that the cooler is out in front of the condenser? I noticed PSC disco’d that style cooler and bracket. They only sell a long cylindrical one now. Wondering if that had something to do with it.
@reconjeeper03215 күн бұрын
@@JeepTJay6 no issues… all good!🇺🇸👍🏻
@sherrypatten61306 күн бұрын
That's awesome, just love that red jeep and Kit! That would be so fun to be there! Ahh, and now I see why the Jeep is always being worked on! That's some awesome driving skills by an awesome guy!
@sherrypatten61304 күн бұрын
😊 I could watch my favorite Jeep, Bill, and Kit over and over again!
@kchilz326 күн бұрын
I hate rear rotors when they get seized. My truck had the same issue I used some long grade 8 bolts screwed them into the bracket from behind while heating the face of the rotor and it was the only thing that works it made a 45 min job to an all day war 😂 also my Mercedes ml320 uses the same oil filter, very convenient
@reconjeeper03216 күн бұрын
Definitely a hard 8 hour brake job
@kchilz326 күн бұрын
Nice! Love brother Chris Jeep looking great!
@JK_Joyride6 күн бұрын
Wow! What a disaster! I had a pin seize up on one of my rear caliper brackets and managed to get it out but it was a bitch. Ultimately I replaced with new hardware. Never seen the rotor that stuck that you had to cut it apart either. Your bro owes you a nice steak dinner!
@reconjeeper03216 күн бұрын
8 hour day… quite a challenge…. But happy to help him! Thanks Ren!👍🏻🇺🇸
@danabryan53588 күн бұрын
Very nice - looks great! Very thorough job as usual!
@reconjeeper03218 күн бұрын
Thank you my friend!👍🏻🇺🇸
@jkgkjgkijk9 күн бұрын
My brother was recon. He reupped afterwards, joined the Navy and flew helicopters and now he flies for AA. I get a kick out of how you guys hold onto four to ten years of your life as a badge of honor until you are old and gray. Life goes on and this country is a human capital farm for a global cabal that does not give a damn about you, your family or your brothers in arms.
@JK_Joyride9 күн бұрын
😂😂😂
@jamiebarrette363010 күн бұрын
Looking forward to this one! 👍
@heind5211 күн бұрын
lol 😂
@JK_Joyride12 күн бұрын
Good effort on that ledge. Even tougher with that rain coming down.
@reconjeeper032112 күн бұрын
Thank you my…. Wish I got it though…👍🏻🇺🇸
@JK_Joyride12 күн бұрын
@@reconjeeper0321 You'll get it
@boon19799913 күн бұрын
Finally, I could some trail riding worth watching.. the usual boring roads where people get out to video their jeeps goin through the water crossing on a maintained road is just sad..
@reconjeeper032113 күн бұрын
Glad you enjoyed it! 👍🏻🇺🇸
@heind5213 күн бұрын
Good thing Gabby was there to guide his dad, he doesn’t want him to flop his Jeep, lol
@heind5213 күн бұрын
Great trail and wheeling right there!
@JK_Joyride14 күн бұрын
Man, great teamwork on a nasty-ass trail! Kudos boys.
@cooters375614 күн бұрын
Awesome footage. I want to do this trail. I am so proud to be in the same club as these wheelers and call them my brothers. That is how we roll
@AmptDesiqns14 күн бұрын
This looks like a blast, Where is this?
@reconjeeper032114 күн бұрын
👍🏻. Somewhere in Vt.👍🏻🇺🇸 epic trip!
@ewingfox645913 күн бұрын
@@reconjeeper0321thank you for the great video, and for NOT posting road names on KZread!! This is VT wheelin' 100% at it's best!!!!!
@artfulstamper2814 күн бұрын
Wow! There are no other words!😮
@danabryan535814 күн бұрын
Great burnouts!!! Tim definitely doesn’t baby that JK!! Btw-liked your intro in next video…it was a nice touch!!
@reconjeeper032114 күн бұрын
I was very impressed with what these boys accomplished!👍🏻🇺🇸
@danabryan535814 күн бұрын
Wow!!! I thought the Mariana Trench was in the Pacific Ocean not Vermont! Took guts to do this one for sure! Nice job everyone!!!
@reconjeeper032114 күн бұрын
Very impressive run!!
@heind5214 күн бұрын
Great looking trail!
@Rubicon1414 күн бұрын
Your Jeep didn’t overheat spinning tires on that rock??? Silver jkur?
@JK_Joyride14 күн бұрын
"Man line" lol
@BluMaGiKCj14 күн бұрын
When I was a kid my we were up in Vermont with Old Colony Jeep and saw an old timer panning for gold, miles into a trail. In Vermont. In CJ’s on 33-35” tire. Next week old miner was on channel 5 “Chronicle”
@gailcameron430614 күн бұрын
Great video. Maybe someday?
@gailcameron430614 күн бұрын
Great job guys. Now I'll have to see it I can make it without winching next time.
@thatskrazy814515 күн бұрын
WOW WTF ARE U DOIN! DO you understand physics? 3 jack no stands with no solid pressure on the ground? Cracked seemingly uneven pavement with ice and snow? Are you on meth or just stupid?
@JK_Joyride15 күн бұрын
Wow. That is tough for us 4 doors
@reconjeeper032115 күн бұрын
Really is tough for the 4 doors… fun and very challenging. 👍🏻🇺🇸
@heind5215 күн бұрын
Tough new trail!
@arronhale28018 күн бұрын
need some o crap handles in that rig had her hand on the rollbar might lose a finger
@reconjeeper032118 күн бұрын
Yes…..
@AjaxbroCt21 күн бұрын
I need less commitment next time on that climb. 😂
@reconjeeper032121 күн бұрын
Great wheeling Adam!👍🏻🇺🇸
@JK_Joyride21 күн бұрын
Nice series Rick! Thank you.
@reconjeeper032121 күн бұрын
Great Time for all Ren! 👍🏻🇺🇸
@heind5221 күн бұрын
Nice, Raymond steels Gabby’s sweet trail riig, nice dad 😂
@JK_Joyride22 күн бұрын
Great videos! Looks like an awesome day at the Farm.
@gabejj6922 күн бұрын
His TJ?! Offended Rick
@reconjeeper032122 күн бұрын
That’s what he says
@colin326624 күн бұрын
Awesome! Those bridges are definitely cool!
@colin326624 күн бұрын
Looking good 👍🏻
@arronhale28024 күн бұрын
Polish that thing to a mirror finish
@heind5224 күн бұрын
Nice, now powder coat?
@Libertypuppylove25 күн бұрын
Very cool
@paulosouza336928 күн бұрын
I have basically the same bypass but the lights stay on whenever the lockers are on, independently if on 4L or 4H or even 2H
@reconjeeper032127 күн бұрын
Perhaps it’s because it’s a different year? Not sure… but blinking lights don’t bother me in bypass mode….atleast the lockers do their thing!👍🏻🇺🇸
@heind5228 күн бұрын
Who’s got it better than you!
@reconjeeper032128 күн бұрын
You do!!😀
@MorrellCullenHomeImpАй бұрын
Rick, it’s Shane. Looks great man! Real nice job.
@reconjeeper0321Ай бұрын
Hello Shane!!! Thank you my brother…you will be roofing around it some day!☺️👍🏻🇺🇸
@arronhale280Ай бұрын
beautiful home u got
@reconjeeper0321Ай бұрын
Thank you my brother!👍🏻🇺🇸
@TheDon8771Ай бұрын
I think it’s dope. I like it.
@reconjeeper0321Ай бұрын
Well not a carpenter… but I think it hold up good👍🏻🇺🇸
Пікірлер
Hats off that was fun to watch!
Glad Duane was safe. That could have been much worse! Keep on truckin’!
Nice job boys! Looks like a fun trail. Wish we were there with you.
this video is a year ago,i hope those bad batches are gone i was thinking getting a whole set for my 15 ram 3500,just imagining if i get the bad ones and run into trouble like the video mentioned i will be totally devastated,i dont have a back up work truck,my supposed to be application for those ball joints are for my welding rig,my truck carries a lot of weight aside from its factory weight,i dont know probley would just go oem way.🤔
@@jcmedalla2007 yes hard to say? I’d like you to think they have worked out the bugs? But don’t know for sure… this was an honest review from my friend Mike and what he went through! Good luck!👍🏻🇺🇸
Any issues with your AC now that the cooler is out in front of the condenser? I noticed PSC disco’d that style cooler and bracket. They only sell a long cylindrical one now. Wondering if that had something to do with it.
@@JeepTJay6 no issues… all good!🇺🇸👍🏻
That's awesome, just love that red jeep and Kit! That would be so fun to be there! Ahh, and now I see why the Jeep is always being worked on! That's some awesome driving skills by an awesome guy!
😊 I could watch my favorite Jeep, Bill, and Kit over and over again!
I hate rear rotors when they get seized. My truck had the same issue I used some long grade 8 bolts screwed them into the bracket from behind while heating the face of the rotor and it was the only thing that works it made a 45 min job to an all day war 😂 also my Mercedes ml320 uses the same oil filter, very convenient
Definitely a hard 8 hour brake job
Nice! Love brother Chris Jeep looking great!
Wow! What a disaster! I had a pin seize up on one of my rear caliper brackets and managed to get it out but it was a bitch. Ultimately I replaced with new hardware. Never seen the rotor that stuck that you had to cut it apart either. Your bro owes you a nice steak dinner!
8 hour day… quite a challenge…. But happy to help him! Thanks Ren!👍🏻🇺🇸
Very nice - looks great! Very thorough job as usual!
Thank you my friend!👍🏻🇺🇸
My brother was recon. He reupped afterwards, joined the Navy and flew helicopters and now he flies for AA. I get a kick out of how you guys hold onto four to ten years of your life as a badge of honor until you are old and gray. Life goes on and this country is a human capital farm for a global cabal that does not give a damn about you, your family or your brothers in arms.
😂😂😂
Looking forward to this one! 👍
lol 😂
Good effort on that ledge. Even tougher with that rain coming down.
Thank you my…. Wish I got it though…👍🏻🇺🇸
@@reconjeeper0321 You'll get it
Finally, I could some trail riding worth watching.. the usual boring roads where people get out to video their jeeps goin through the water crossing on a maintained road is just sad..
Glad you enjoyed it! 👍🏻🇺🇸
Good thing Gabby was there to guide his dad, he doesn’t want him to flop his Jeep, lol
Great trail and wheeling right there!
Man, great teamwork on a nasty-ass trail! Kudos boys.
Awesome footage. I want to do this trail. I am so proud to be in the same club as these wheelers and call them my brothers. That is how we roll
This looks like a blast, Where is this?
👍🏻. Somewhere in Vt.👍🏻🇺🇸 epic trip!
@@reconjeeper0321thank you for the great video, and for NOT posting road names on KZread!! This is VT wheelin' 100% at it's best!!!!!
Wow! There are no other words!😮
Great burnouts!!! Tim definitely doesn’t baby that JK!! Btw-liked your intro in next video…it was a nice touch!!
I was very impressed with what these boys accomplished!👍🏻🇺🇸
Wow!!! I thought the Mariana Trench was in the Pacific Ocean not Vermont! Took guts to do this one for sure! Nice job everyone!!!
Very impressive run!!
Great looking trail!
Your Jeep didn’t overheat spinning tires on that rock??? Silver jkur?
"Man line" lol
When I was a kid my we were up in Vermont with Old Colony Jeep and saw an old timer panning for gold, miles into a trail. In Vermont. In CJ’s on 33-35” tire. Next week old miner was on channel 5 “Chronicle”
Great video. Maybe someday?
Great job guys. Now I'll have to see it I can make it without winching next time.
WOW WTF ARE U DOIN! DO you understand physics? 3 jack no stands with no solid pressure on the ground? Cracked seemingly uneven pavement with ice and snow? Are you on meth or just stupid?
Wow. That is tough for us 4 doors
Really is tough for the 4 doors… fun and very challenging. 👍🏻🇺🇸
Tough new trail!
need some o crap handles in that rig had her hand on the rollbar might lose a finger
Yes…..
I need less commitment next time on that climb. 😂
Great wheeling Adam!👍🏻🇺🇸
Nice series Rick! Thank you.
Great Time for all Ren! 👍🏻🇺🇸
Nice, Raymond steels Gabby’s sweet trail riig, nice dad 😂
Great videos! Looks like an awesome day at the Farm.
His TJ?! Offended Rick
That’s what he says
Awesome! Those bridges are definitely cool!
Looking good 👍🏻
Polish that thing to a mirror finish
Nice, now powder coat?
Very cool
I have basically the same bypass but the lights stay on whenever the lockers are on, independently if on 4L or 4H or even 2H
Perhaps it’s because it’s a different year? Not sure… but blinking lights don’t bother me in bypass mode….atleast the lockers do their thing!👍🏻🇺🇸
Who’s got it better than you!
You do!!😀
Rick, it’s Shane. Looks great man! Real nice job.
Hello Shane!!! Thank you my brother…you will be roofing around it some day!☺️👍🏻🇺🇸
beautiful home u got
Thank you my brother!👍🏻🇺🇸
I think it’s dope. I like it.
Well not a carpenter… but I think it hold up good👍🏻🇺🇸
You should of called a professional 😭😭
I don’t think it’s going abywhere