Thanks a bunch. I cut my pool noodle to 9 inches (perfect fit). I also got the 2 pack wooden rulers from DOLLAR TREE; took the measuring strips off and hot glued the strips to my pool noodles to use as measuring tape.
@z28kid3 күн бұрын
what were your perf settings set to?
@keshiabrooks60184 күн бұрын
Why did you hold the needle down while it was doing the trace?
@daveknowles86325 күн бұрын
Just have a quick question. With Richardson hats we don't have issues with puckering, but with other brands we do. What would you recommend to fix this?
@Anurag-05344g7 күн бұрын
Hey, A lively video🙌! I'm not really sure if it is the best time to ask but, I was wondering if I could help you create a better distribution by working on post-production like better storytelling through Edits, Keywords, think catchy intros and outros, or even some engaging short clips! Would love to chat if you're interested and keep creating good content:)
@puledressdesigns7 күн бұрын
Wow 139k stitches, I thought 179k was crazy when I had a pic digitized, but perhaps that is a normal stitch count for big hoop size?!
@mannyfilmsinc7 күн бұрын
great video, thank you. How do you avoid printing the registration marks on the screen onto the garment?
@MR247TSF8 күн бұрын
Big dogggggg I appreciate you great work and demo
@wendyannerose107210 күн бұрын
Thanks for the vid. What heat press do you recommend, and what features should I look for? Thanks in advance.
@HeartHustlePrinting10 күн бұрын
@@wendyannerose1072 it would all depend on your budget.
@pamlajones148311 күн бұрын
OMG! Thank you so much for this! I have a SWD 1501. The panel is totally different, but the technique worked for my machine as well. You are awesome!
@HeartHustlePrinting9 күн бұрын
YES!!!!! Glad it helped!! Let me know if there is any other videos you would like to see.
@JackieZCreation13 күн бұрын
Wow,this is probably the best video I’ve ever watched on KZread, the camera angle is just perfect, I mean perfect, thank you so so much
@daveknowles863213 күн бұрын
You are awesome to watch and very informative. I have so many question for you. I am just getting into everything. Just bought a MT-1502.
@HeartHustlePrinting13 күн бұрын
Awesome!!! THANKS FOR WATCHING!! Let me know if you have ideas for a video.
@joshuac987719 күн бұрын
Sup bro great job can you tell me were you get the magnetic strip for the machine please and thanks?
@HeartHustlePrinting16 күн бұрын
Thanks for watching. You can buy it at Home Depot or Lowe’s
@joshuac987716 күн бұрын
@@HeartHustlePrinting thanks alot!
@Courtney-d1t20 күн бұрын
Quick question. You’re saying 285 but putting it on 385. Is it 385 correct I am new to this? First time using it.
@steve-vx3lx26 күн бұрын
roland and hp has had a baby
@lizmorgan915526 күн бұрын
what do you have the cap frame size (x size and y size) for the embroidery frame setting?
@lizmorgan915526 күн бұрын
thank you!! so helpful.
@cherylcampbell99429 күн бұрын
What size needle? I keep getting thread breaks n the need doesn't sew good on the seam?
@HeartHustlePrinting27 күн бұрын
What machine are you using?
@roseelston886629 күн бұрын
Hi Joe, I was trying to find a link to your digitizer, but I don’t see him down there. Can you post that thank you.
@yanirapena2039Ай бұрын
The best explanation, thank you so much!
@syltoy2745Ай бұрын
You mentioned your digitizer, but I didn't find his name /number below.
@analauravela4758Ай бұрын
Hi. What needle do you use?
@sweetlilianeАй бұрын
Is LXI the same as flexi?
@khouavang3242Ай бұрын
Wow I am been an embroidery sewer for 25 years..I learn one trick from you by doing hats. Ricoma emb. machine looks very complicated for threading and adjusting the tensions. Maybe you like it. Barudan is use friendly for threading. Both machines sewing are equal good quality.
@abebeamare48565 күн бұрын
Richpeace is very good
@abebeamare48565 күн бұрын
Above both
@rustydrake1828Ай бұрын
what is ur 3 year thoughts on the press? I'm about to purchase a press and would like some impute
@HeartHustlePrintingАй бұрын
Use it everyday. Message me on IG I’m printing right now.
@GOLDVIOLINbowofdeathАй бұрын
Where can I get one of those I love desert shirts?
@stitchartembroideryАй бұрын
Great Video thank you
@lorenzostewart9185Ай бұрын
I have a the same machine, how do I trace the design slower like on the mt1501? Where it moves slowly showing exactly where the design will go?
@HeartHustlePrintingАй бұрын
On the 6 head unfortunately you cannot do it.
@lorenzostewart9185Ай бұрын
@@HeartHustlePrinting thanks much
@jkj10Ай бұрын
Do you wash with cold or warm water? What lamp do you use for lighting, how long do you light it and what’s the distance between the lamp and the screen?
@MazeartshopАй бұрын
Thanks man I learned a total life hacks 👏👏
@darlenehermesmann4753Ай бұрын
Great info! Can you tell me why you use the adhesive spray instead of tape? Does it leave any residue on the item?
@MrSamisue27Ай бұрын
Interesting. You didn't use water or steam...or pull down hard while hooping (as shown by ricoma) and yet yours come out just fine....I think that's part of what makes learning these machines so confusing is there is so much variability in how people do things and what works for one, doesn't work for another. This leads me to believe we as individuals learning our machines need to try ALL the techniques to find out which one works for us!
@JasperOFlanigan-fb5lvАй бұрын
In true Army style there are no consequences. It’s not a sucker punch contest. You wanna settle it like men? Let someone be in a position to throw hands as well. Too many people hyping a coward who didn’t have the balls to stand toe to toe
@StraightOuttaContentАй бұрын
Hey, I sent an email last night if you are still interested in the TXF-300. We can still offer you the FLASH sale, just let me know.
No matter what I do I keep hitting that metal strap. Design is less that 2 inches tall. I've made design smaller, not hooped AS close to the tab, adjusted placement to the very edge just before it turns red (on the outline) and it's STILL hitting the strap....What am I missing here? Also, would it be helpful to put a layer of water soluble stabilizer on top or is that pointless? Appreciating your videos VERY much, thank you for putting these all here for us to be able to figure this learning curve out! <3
@HeartHustlePrintingАй бұрын
No water soluble needed. Send me file so I can look at it. [email protected]
@neyengwieregina232Ай бұрын
Good work. Interested in your videos
@tristanwayman4027Ай бұрын
Great nips!
@TheMindsetThinkTank2 ай бұрын
I used your link to start a free trial of Yo Print. Just finished the Demo with a rep. I think I'll be switching from Printavo! Thanks for the referral!🙂
@HeartHustlePrinting2 ай бұрын
Awesome!! Glad you liked it. Use link and get a %off
@lavernebillups31822 ай бұрын
😊hello joe
@jessiedejongh68372 ай бұрын
Thank you very much! I have an EM-1010 for 2years, and you teach super. I learned something today. I’m not an expert on my Ricoma jet, but I’m continuing watching you to learn more 🙋🏻♀️
@HeartHustlePrinting2 ай бұрын
Thanks for watching. Glad you learned something in this video. Make sure you clicked the bell to be notified when I put out new videos.
@maljnaey76342 ай бұрын
hello my brother , when i use CMYK Dual , How much ink is enough to run out ?
@HeartHustlePrinting2 ай бұрын
You can run it till it runs out. Then put in the new cartridge and it wont miss a beat
@maljnaey76342 ай бұрын
@@HeartHustlePrinting how many metter CMYK ?
@Lovebitescreations2 ай бұрын
My Man you saved me !! We have a 1501 and I had left my phone on the side and it blocked the carriage and got the 'No Needel' Thank you so much ! Kelly
@HeartHustlePrinting2 ай бұрын
AWESOME!! Glad this video helped you out. Don't forget to subscribe and click the bell to get notified when I put out new tip and tricks. Joe
@frankcurrentii68442 ай бұрын
Great video! What do you clean the loctite temp spray nozzel with? Having trouble with the spray leaving spray glue spots.
@zgagatwet12212 ай бұрын
love it
@DawnAdolfsson2 ай бұрын
can you use heat press plate on wood?
@BruceLeef2 ай бұрын
Hey Joe.... in 2024 would you still recommend this ink .. ?? Thanks again just trying to get started 🎨 👕 😊
@wwjd5262 ай бұрын
Thanks
@marianietes80672 ай бұрын
Just started following and your YT channel is amazing! Im a very newbie and just receibved my MT1501 recently. Did you use a Robot clamp for the bag? TIA
@HeartHustlePrinting2 ай бұрын
No, in this clip i use the mighty hoop.. Thanks for joining the ch..
Пікірлер
Thank you so much
Thanks a bunch. I cut my pool noodle to 9 inches (perfect fit). I also got the 2 pack wooden rulers from DOLLAR TREE; took the measuring strips off and hot glued the strips to my pool noodles to use as measuring tape.
what were your perf settings set to?
Why did you hold the needle down while it was doing the trace?
Just have a quick question. With Richardson hats we don't have issues with puckering, but with other brands we do. What would you recommend to fix this?
Hey, A lively video🙌! I'm not really sure if it is the best time to ask but, I was wondering if I could help you create a better distribution by working on post-production like better storytelling through Edits, Keywords, think catchy intros and outros, or even some engaging short clips! Would love to chat if you're interested and keep creating good content:)
Wow 139k stitches, I thought 179k was crazy when I had a pic digitized, but perhaps that is a normal stitch count for big hoop size?!
great video, thank you. How do you avoid printing the registration marks on the screen onto the garment?
Big dogggggg I appreciate you great work and demo
Thanks for the vid. What heat press do you recommend, and what features should I look for? Thanks in advance.
@@wendyannerose1072 it would all depend on your budget.
OMG! Thank you so much for this! I have a SWD 1501. The panel is totally different, but the technique worked for my machine as well. You are awesome!
YES!!!!! Glad it helped!! Let me know if there is any other videos you would like to see.
Wow,this is probably the best video I’ve ever watched on KZread, the camera angle is just perfect, I mean perfect, thank you so so much
You are awesome to watch and very informative. I have so many question for you. I am just getting into everything. Just bought a MT-1502.
Awesome!!! THANKS FOR WATCHING!! Let me know if you have ideas for a video.
Sup bro great job can you tell me were you get the magnetic strip for the machine please and thanks?
Thanks for watching. You can buy it at Home Depot or Lowe’s
@@HeartHustlePrinting thanks alot!
Quick question. You’re saying 285 but putting it on 385. Is it 385 correct I am new to this? First time using it.
roland and hp has had a baby
what do you have the cap frame size (x size and y size) for the embroidery frame setting?
thank you!! so helpful.
What size needle? I keep getting thread breaks n the need doesn't sew good on the seam?
What machine are you using?
Hi Joe, I was trying to find a link to your digitizer, but I don’t see him down there. Can you post that thank you.
The best explanation, thank you so much!
You mentioned your digitizer, but I didn't find his name /number below.
Hi. What needle do you use?
Is LXI the same as flexi?
Wow I am been an embroidery sewer for 25 years..I learn one trick from you by doing hats. Ricoma emb. machine looks very complicated for threading and adjusting the tensions. Maybe you like it. Barudan is use friendly for threading. Both machines sewing are equal good quality.
Richpeace is very good
Above both
what is ur 3 year thoughts on the press? I'm about to purchase a press and would like some impute
Use it everyday. Message me on IG I’m printing right now.
Where can I get one of those I love desert shirts?
Great Video thank you
I have a the same machine, how do I trace the design slower like on the mt1501? Where it moves slowly showing exactly where the design will go?
On the 6 head unfortunately you cannot do it.
@@HeartHustlePrinting thanks much
Do you wash with cold or warm water? What lamp do you use for lighting, how long do you light it and what’s the distance between the lamp and the screen?
Thanks man I learned a total life hacks 👏👏
Great info! Can you tell me why you use the adhesive spray instead of tape? Does it leave any residue on the item?
Interesting. You didn't use water or steam...or pull down hard while hooping (as shown by ricoma) and yet yours come out just fine....I think that's part of what makes learning these machines so confusing is there is so much variability in how people do things and what works for one, doesn't work for another. This leads me to believe we as individuals learning our machines need to try ALL the techniques to find out which one works for us!
In true Army style there are no consequences. It’s not a sucker punch contest. You wanna settle it like men? Let someone be in a position to throw hands as well. Too many people hyping a coward who didn’t have the balls to stand toe to toe
Hey, I sent an email last night if you are still interested in the TXF-300. We can still offer you the FLASH sale, just let me know.
Sorry I done see it, can you send to [email protected] Thanks!!
Just subscribed
No matter what I do I keep hitting that metal strap. Design is less that 2 inches tall. I've made design smaller, not hooped AS close to the tab, adjusted placement to the very edge just before it turns red (on the outline) and it's STILL hitting the strap....What am I missing here? Also, would it be helpful to put a layer of water soluble stabilizer on top or is that pointless? Appreciating your videos VERY much, thank you for putting these all here for us to be able to figure this learning curve out! <3
No water soluble needed. Send me file so I can look at it. [email protected]
Good work. Interested in your videos
Great nips!
I used your link to start a free trial of Yo Print. Just finished the Demo with a rep. I think I'll be switching from Printavo! Thanks for the referral!🙂
Awesome!! Glad you liked it. Use link and get a %off
😊hello joe
Thank you very much! I have an EM-1010 for 2years, and you teach super. I learned something today. I’m not an expert on my Ricoma jet, but I’m continuing watching you to learn more 🙋🏻♀️
Thanks for watching. Glad you learned something in this video. Make sure you clicked the bell to be notified when I put out new videos.
hello my brother , when i use CMYK Dual , How much ink is enough to run out ?
You can run it till it runs out. Then put in the new cartridge and it wont miss a beat
@@HeartHustlePrinting how many metter CMYK ?
My Man you saved me !! We have a 1501 and I had left my phone on the side and it blocked the carriage and got the 'No Needel' Thank you so much ! Kelly
AWESOME!! Glad this video helped you out. Don't forget to subscribe and click the bell to get notified when I put out new tip and tricks. Joe
Great video! What do you clean the loctite temp spray nozzel with? Having trouble with the spray leaving spray glue spots.
love it
can you use heat press plate on wood?
Hey Joe.... in 2024 would you still recommend this ink .. ?? Thanks again just trying to get started 🎨 👕 😊
Thanks
Just started following and your YT channel is amazing! Im a very newbie and just receibved my MT1501 recently. Did you use a Robot clamp for the bag? TIA
No, in this clip i use the mighty hoop.. Thanks for joining the ch..