What paint do you use permanent for plastic? Because I have a lot of custom figures from marvel legends in my mind but I don't figure it out yet which paint is the best for plastic to remain🤔
@GeekItOutCustoms21 күн бұрын
Acrylic paints and air brush paints, finish it off with a ultra matt vanish
@topregele658221 күн бұрын
@GeekItOutCustoms bro i really need a tutorial for that step by step. Because I'm beginner. I tried painting with model colors one time but only painting not using primer and stuff. And if I tried to scratch it comes off like a gum.
@majackslelo82725 күн бұрын
😀🫡🫡🫡🫡
@TKMagicShop27 күн бұрын
So sick!
@GeekItOutCustoms27 күн бұрын
Thank you very much. I'm thinking about selling him now haha
@TKMagicShop27 күн бұрын
@@GeekItOutCustoms where do you post your listings
@GeekItOutCustoms26 күн бұрын
Either on my facebook page, or uk hot toys collectors club group on fb and ebay. I send internationally too@@TKMagicShop
@seankirkland8900Ай бұрын
🔥 🔥🔥🔥🔥🔥🔥😊
@chingfrost6612 ай бұрын
You made into shit
@MasterRazzer762 ай бұрын
Cool custom bro What colors did you used?
@GeekItOutCustoms2 ай бұрын
Thanks man, Vallejo Medium Yellow and Vellejo French Blue, both air paints
@MasterRazzer762 ай бұрын
Nice
@GeekItOutCustoms2 ай бұрын
Thanks very much
@allania2772 ай бұрын
Pure BS 👎🏻 just ruined a good figure and wasted time
@GeekItOutCustoms21 күн бұрын
Lol
@guxo322 ай бұрын
Hi man, how did you fix Anakin's head with Darth Vader's body?
@GeekItOutCustoms2 ай бұрын
Hey I ended up swapping the body out for a more slimline body in the end but at first I just stuck it in with a rubber neck plug
@ethanestrada75773 ай бұрын
100/10😊
@GeekItOutCustoms4 ай бұрын
Hi yes, I have a 3d printer for most parts and for others I shop at ebay or aliexpress
@Force_Wielder4 ай бұрын
Great work. I've been creating 1/12 scale figures but rather do 1/6 scale like yours. Where are you getting your supplies? Do you have 3d printer for parts like armor and other things?
@user-cr8tv9go7d4 ай бұрын
Это не из марвел❤ я марвел❤❤❤
@JediMasterBook58844 ай бұрын
I think you have the claws just a little to high.
@henryRobshirts4 ай бұрын
Absolute mad lad
@GeekItOutCustoms4 ай бұрын
Lol thanks 😊
@en68534 ай бұрын
Best possible use for the endgame team suit
@GeekItOutCustoms4 ай бұрын
Thank you 👍
@pablobecerra19954 ай бұрын
Looks good 💯
@GeekItOutCustoms2 ай бұрын
Thanks 💯
@dakotalamberson49804 ай бұрын
Thats dope
@jabbajguerrero71964 ай бұрын
🔥🔥🔥
@gunnarb95254 ай бұрын
This is amazing. Only thing missing is the pauldron on his right shoulder is a different color. But the fact that this is homemade is crazy.
@GeekItOutCustoms4 ай бұрын
Thank you so much
@GeekItOutCustoms4 ай бұрын
Thank you so much
@charlottebk79945 ай бұрын
❤❤❤❤
@cdulez7 ай бұрын
Very nice lad!Ive only started messing about with 1/6 figures.Impossible to have a cheap SW hobby😂
@GeekItOutCustoms7 ай бұрын
Lol that's true! Thank you very much
@droxus3407 ай бұрын
This looks amazing! Where did you get the armor stl from?
@GeekItOutCustoms7 ай бұрын
Hiya, I purchased the armor set :)
@jonathanchan49087 ай бұрын
@@GeekItOutCustoms looks great! I recently found some clone armor I scaled down to 1/6 after some test prints and Im just waiting for the body and the undersuit to arrive now!
@user-ye8xg7jd1l7 ай бұрын
You made it along whole lot better
@ricepicker5627 ай бұрын
Where did you get the flight suit?
@GeekItOutCustoms7 ай бұрын
Aliexpress pal
@anakinnskywalker9 ай бұрын
bro must have a ton of money to be dismantling an $800 figure’s head 😭😭😭 W work tho
@CrispyA1139 ай бұрын
🥰
@CrispyA1139 ай бұрын
Dam dude that’s so cool
@aaronbrookes68859 ай бұрын
Can u do Harry qhin please
@GeekItOutCustoms9 ай бұрын
Maybe!
@0BI-WAN.KENOBI9 ай бұрын
Anakin...? 😢
@GeekItOutCustoms9 ай бұрын
Poor anakin 😢
@kahseng70299 ай бұрын
may i know what kind of cloth do u use to make the outfit?
@GeekItOutCustoms9 ай бұрын
Hey! I used just some brown cloth I bought from hobbycraft in UK. I bought 2 different types. Not sure on the material, it just felt right. Try and upholstery shops to find different fabrics 👍
@kahseng70299 ай бұрын
@@GeekItOutCustoms Thanks!
@chuckytherapper11 ай бұрын
I was cringing thinking that was the OG head sculpt 😬 😅 really well done man.
@valmid506911 ай бұрын
Viewers: man KZread recommendations are being boring lately Kenobi Clips: *Hello There!*
@panfilip996311 ай бұрын
Oh, it's beautiful. Did you use original HT head sculpt here, or a 3rd party one?
@GeekItOutCustoms11 ай бұрын
Thank you so much. I used a third party, I wouldn't have the heart to use an original haha 😆
@uncardedreviews972111 ай бұрын
👏😎 I like for all of my clone troopers to look different...I mean since they're clones they look mostly the same, but with some differences 😂👍
@GeekItOutCustoms11 ай бұрын
I'm exactly the same my friend... I'm guessing you have watched clone wars? I love the difference and personalities in the clones
@uncardedreviews972111 ай бұрын
@GeekItOutCustoms yes indeed 👏😎 Hot Toys has been doing a pretty good job making the Temura Morrison headsculpt look somewhat different, but I also like to mix in a few of those earlier Sideshow Collectibles Clone troopers too, just to give my display some variety 😀
@GeekItOutCustoms11 ай бұрын
@uncardedreviews9721 😄 I totally get you, there's just something so satisfying singing a bunch of clones together haha I have 2 more head sculpts waiting to be modded and placed on a clone trooper I buy. Looking into more of the older sideshow stuff myself.
@uncardedreviews972111 ай бұрын
@GeekItOutCustoms For sure 😁👍 those Sideshow Collectibles Clone Wars troopers are legendary 🙌 Sometime you can find bits and pieces of Sideshow clone fodder online and when you kitbash it together it works out great 👍 In my imagination, some of these clones are older models that have seen lots of action, while others are still fresh and shiny, so it makes sense in my collection to mix them up a bit 😀
@uncardedreviews972111 ай бұрын
Wow 😮👍 you really made Anakin's conversion to the Darkside complete 😅🎉
@GeekItOutCustoms11 ай бұрын
Haha thank you very much! I tried 😄 🤣
@Anakin_thechosen1 Жыл бұрын
Deadpool is darth vader 😂
@Auvas_Damask10 ай бұрын
It doesn't look that ugly.
@Rguy2000_ Жыл бұрын
Rosses Are red bb-8 is round ¨Its over Anakin I have the high Ground¨🤣
@GeekItOutCustoms Жыл бұрын
😄 🤣
@Tayz-uv3bh Жыл бұрын
Where u get the head from
@GeekItOutCustoms Жыл бұрын
Ebay 😊 then I painted the beard on :)
@Tayz-uv3bh Жыл бұрын
@@GeekItOutCustoms oh that’s awesome, I’ve tried to find them but only 3D print molds. Nothing that’s been painted to that scale you have. Are you using a pre-existing sideshow clone head ?
@GeekItOutCustoms11 ай бұрын
@Tayz-uv3bh sorry just seen this, I believe they are possibly 3d printed and painted in China. I'm not sure, they just do an amazing job on them and so it makes it easier for me to just mold and sculpt a new beard on or in this case paint the stubble on
@simonjohnmarsden9129 Жыл бұрын
do u supply
@GeekItOutCustoms Жыл бұрын
Hiya yes I do, drop me a message on "geek it out customs" on Facebook or my instagram geekitout_customs. Links are in my profile 😊
@VST89 Жыл бұрын
How’d you make this figure? If you bought it, what figure is it?
@GeekItOutCustoms Жыл бұрын
Hiya, I made this! Check my videos out, I have the step by step of him on there. 😀 hope it helps!
@VST89 Жыл бұрын
@@GeekItOutCustomswhere is the video?
@GeekItOutCustoms Жыл бұрын
@@VST89 kzread.info6T6HrrkyOWM?feature=share
@GeekItOutCustoms Жыл бұрын
@@VST89 hiya hope this helps
@Natedog-gx3nj Жыл бұрын
I'm impressed
@XanadudeFilms Жыл бұрын
It’s not about what’s right it’s about what’s FAIR
@atomicstud Жыл бұрын
I found you😈
@bastiaandijs50442 ай бұрын
Hey Harvey
@justinrosa7155 Жыл бұрын
Kick ass😎👍👍👍👍👍👍👍👍👍
@deznolut Жыл бұрын
That's super cool. Nice
@GeekItOutCustoms Жыл бұрын
Thanks!
@GeekItOutCustoms Жыл бұрын
Iv done a few figures, check my other videos if you like 😀
@justinrosa7155 Жыл бұрын
Half burning face of Anakin Skywalker aka Darth Vader with a Mask of Darth Vader!?
@GeekItOutCustoms Жыл бұрын
I thought it could be this mythos alternate fanfiction vader's rebreather.
@justinrosa7155 Жыл бұрын
I thought too because it look different between burning face Darth Vader or half burning face Darth Vader too!?
@GeekItOutCustoms Жыл бұрын
@Justin Rosa I just wanted to create a "whatif" darth vader, and I'm very happy with it. I like mythos alternatives to a lot of things. Also, thank you for watching and commenting 😀 👍
@justinrosa7155 Жыл бұрын
Oooooooh! Your welcome and also I love your action figure of Darth Vader it look kick ass and I wish they make him of half burning face Darth Vader and hope he will kill the emperor soon!
Пікірлер
Super underrated
戇鳩,等Hot Toys 出隻新嘅唔好 嘥幾隻嘢嚟改
Good work!
Thank you! Cheers!
What paint do you use permanent for plastic? Because I have a lot of custom figures from marvel legends in my mind but I don't figure it out yet which paint is the best for plastic to remain🤔
Acrylic paints and air brush paints, finish it off with a ultra matt vanish
@GeekItOutCustoms bro i really need a tutorial for that step by step. Because I'm beginner. I tried painting with model colors one time but only painting not using primer and stuff. And if I tried to scratch it comes off like a gum.
😀🫡🫡🫡🫡
So sick!
Thank you very much. I'm thinking about selling him now haha
@@GeekItOutCustoms where do you post your listings
Either on my facebook page, or uk hot toys collectors club group on fb and ebay. I send internationally too@@TKMagicShop
🔥 🔥🔥🔥🔥🔥🔥😊
You made into shit
Cool custom bro What colors did you used?
Thanks man, Vallejo Medium Yellow and Vellejo French Blue, both air paints
Nice
Thanks very much
Pure BS 👎🏻 just ruined a good figure and wasted time
Lol
Hi man, how did you fix Anakin's head with Darth Vader's body?
Hey I ended up swapping the body out for a more slimline body in the end but at first I just stuck it in with a rubber neck plug
100/10😊
Hi yes, I have a 3d printer for most parts and for others I shop at ebay or aliexpress
Great work. I've been creating 1/12 scale figures but rather do 1/6 scale like yours. Where are you getting your supplies? Do you have 3d printer for parts like armor and other things?
Это не из марвел❤ я марвел❤❤❤
I think you have the claws just a little to high.
Absolute mad lad
Lol thanks 😊
Best possible use for the endgame team suit
Thank you 👍
Looks good 💯
Thanks 💯
Thats dope
🔥🔥🔥
This is amazing. Only thing missing is the pauldron on his right shoulder is a different color. But the fact that this is homemade is crazy.
Thank you so much
Thank you so much
❤❤❤❤
Very nice lad!Ive only started messing about with 1/6 figures.Impossible to have a cheap SW hobby😂
Lol that's true! Thank you very much
This looks amazing! Where did you get the armor stl from?
Hiya, I purchased the armor set :)
@@GeekItOutCustoms looks great! I recently found some clone armor I scaled down to 1/6 after some test prints and Im just waiting for the body and the undersuit to arrive now!
You made it along whole lot better
Where did you get the flight suit?
Aliexpress pal
bro must have a ton of money to be dismantling an $800 figure’s head 😭😭😭 W work tho
🥰
Dam dude that’s so cool
Can u do Harry qhin please
Maybe!
Anakin...? 😢
Poor anakin 😢
may i know what kind of cloth do u use to make the outfit?
Hey! I used just some brown cloth I bought from hobbycraft in UK. I bought 2 different types. Not sure on the material, it just felt right. Try and upholstery shops to find different fabrics 👍
@@GeekItOutCustoms Thanks!
I was cringing thinking that was the OG head sculpt 😬 😅 really well done man.
Viewers: man KZread recommendations are being boring lately Kenobi Clips: *Hello There!*
Oh, it's beautiful. Did you use original HT head sculpt here, or a 3rd party one?
Thank you so much. I used a third party, I wouldn't have the heart to use an original haha 😆
👏😎 I like for all of my clone troopers to look different...I mean since they're clones they look mostly the same, but with some differences 😂👍
I'm exactly the same my friend... I'm guessing you have watched clone wars? I love the difference and personalities in the clones
@GeekItOutCustoms yes indeed 👏😎 Hot Toys has been doing a pretty good job making the Temura Morrison headsculpt look somewhat different, but I also like to mix in a few of those earlier Sideshow Collectibles Clone troopers too, just to give my display some variety 😀
@uncardedreviews9721 😄 I totally get you, there's just something so satisfying singing a bunch of clones together haha I have 2 more head sculpts waiting to be modded and placed on a clone trooper I buy. Looking into more of the older sideshow stuff myself.
@GeekItOutCustoms For sure 😁👍 those Sideshow Collectibles Clone Wars troopers are legendary 🙌 Sometime you can find bits and pieces of Sideshow clone fodder online and when you kitbash it together it works out great 👍 In my imagination, some of these clones are older models that have seen lots of action, while others are still fresh and shiny, so it makes sense in my collection to mix them up a bit 😀
Wow 😮👍 you really made Anakin's conversion to the Darkside complete 😅🎉
Haha thank you very much! I tried 😄 🤣
Deadpool is darth vader 😂
It doesn't look that ugly.
Rosses Are red bb-8 is round ¨Its over Anakin I have the high Ground¨🤣
😄 🤣
Where u get the head from
Ebay 😊 then I painted the beard on :)
@@GeekItOutCustoms oh that’s awesome, I’ve tried to find them but only 3D print molds. Nothing that’s been painted to that scale you have. Are you using a pre-existing sideshow clone head ?
@Tayz-uv3bh sorry just seen this, I believe they are possibly 3d printed and painted in China. I'm not sure, they just do an amazing job on them and so it makes it easier for me to just mold and sculpt a new beard on or in this case paint the stubble on
do u supply
Hiya yes I do, drop me a message on "geek it out customs" on Facebook or my instagram geekitout_customs. Links are in my profile 😊
How’d you make this figure? If you bought it, what figure is it?
Hiya, I made this! Check my videos out, I have the step by step of him on there. 😀 hope it helps!
@@GeekItOutCustomswhere is the video?
@@VST89 kzread.info6T6HrrkyOWM?feature=share
@@VST89 hiya hope this helps
I'm impressed
It’s not about what’s right it’s about what’s FAIR
I found you😈
Hey Harvey
Kick ass😎👍👍👍👍👍👍👍👍👍
That's super cool. Nice
Thanks!
Iv done a few figures, check my other videos if you like 😀
Half burning face of Anakin Skywalker aka Darth Vader with a Mask of Darth Vader!?
I thought it could be this mythos alternate fanfiction vader's rebreather.
I thought too because it look different between burning face Darth Vader or half burning face Darth Vader too!?
@Justin Rosa I just wanted to create a "whatif" darth vader, and I'm very happy with it. I like mythos alternatives to a lot of things. Also, thank you for watching and commenting 😀 👍
Oooooooh! Your welcome and also I love your action figure of Darth Vader it look kick ass and I wish they make him of half burning face Darth Vader and hope he will kill the emperor soon!