what size is that piston ? and won’t the compression change due to different depths of the piston ?
@rixa.16 күн бұрын
Where did you get a piston for 10 euros??
@alexmontalvo95220 күн бұрын
And it blew up after the second time riding it
@alexmontalvo95220 күн бұрын
I’m lowkey a bit pisses Idk what happend it was riding good until I shifted wrong then turned it off then it blew up
@alexmontalvo95220 күн бұрын
I had one jst gotnit
@elektreset81423 күн бұрын
Helped me a lot thank you🙏
@xman6544Ай бұрын
Wtf that was click bate. It showed a 250 2 stroke what happened??
@Builditathome-Restoration27 күн бұрын
It didnt fit so 125 chinese we went
@TroyLauffenburgerАй бұрын
how could you not see your fuel line is kinked
@EinimasАй бұрын
A fun engine fixup!
@Builditathome-Restoration27 күн бұрын
Sold it as is dont have to much space here
@Einimas27 күн бұрын
@@Builditathome-Restoration we all make choices.
@AmberlyMccombsАй бұрын
So I took my dirtbike mudding and in the middle of the mud my dirtbike turned off and hasn’t started since I took my whole dirtbike apart dumped out all of the gas took my nibbi carburetor off cleaned it and I took my engine off and took the engine apart drain all the oil and then I put everything back together put new oil in it and new gas and it’s still not starting and now there’s something leaking out of my bike and idk what it is and it still won’t start and it has compression but not as good as it should do you know any reason why it wouldn’t be starting still or what would be leaking out of my engine?
@pollodormido25 күн бұрын
You saw in the Video it was the cdi
@thefubartraveleralibrown2947Ай бұрын
Omg 😂thank you Bro!🎉
@JustSimpleMatas2 ай бұрын
Thanks mate. Just lost my keys and I need to remove ecu, so that video helped me a lot!
@MilanPetrovic-ve5kt2 ай бұрын
Ich habe 2001 baujahr,ich libe diese Motorrad.
@Builditathome-Restoration2 ай бұрын
Zeer shön
@ChaplainKC3 ай бұрын
YOU'RE MY HERO BRO!!
@Builditathome-Restoration2 ай бұрын
Great to hear that it helped you! Thanks!
@Dirtbike1193 ай бұрын
It’s bogging when you rev it wide open check the valves and clean the carb out
@Cognitiveleaper3 ай бұрын
I will try it.
@TheREALISTvision3 ай бұрын
OMG MAN U JUST SAVED MY ASS FROM SPENDING AT LEAST 60€ OR EVEN MORE!!! It didnt go like in this vid, becouse i have a diffrenet scooter, but it was VERY similar. First i didnt know what i was searching, but then i finaly saw it and all i had to do, was to give a cable a little push and BAM IN OPENED!!! THANK YOU VERY VERY MUCH MAN THANK YOU! HAVE A GREAT DAY MAN
@Builditathome-Restoration3 ай бұрын
Great to hear!
@elfmasterpeecup9233 ай бұрын
What exact wire should I use
@Builditathome-Restoration22 күн бұрын
A random spoke from an old bike but any kind of wire would do.
@ryanrott59174 ай бұрын
Is this a dry or wet sump?
@Builditathome-RestorationАй бұрын
Wet sump
@music_01734 ай бұрын
so if you just buy 10w40 oil for a pitbike its good ? no matter wich engine, im new to this so idk much abt pit bikes
@user-dz2tf5el8i5 ай бұрын
What if I don’t have a way to hone the barrel
@Builditathome-Restoration5 ай бұрын
Use 800 grid sand paper
@Antonandgeorge3 ай бұрын
Buy another one there like 20-30 quid
@christerfer4096 ай бұрын
What size are the bigger wheels and tires?
@Builditathome-Restoration5 ай бұрын
I think 14 inch in the back 17 in front not 100 sure
@brianchristenson60556 ай бұрын
I’m on my second 02’ zx6r. Love them. Also have a fireblade that I love equally. Cool vid thx!)
@Builditathome-Restoration5 ай бұрын
Thanks alot!
@angelodejonge74716 ай бұрын
Kom je uit de buurt van coevorden ? Ik moet ook nieuwe klepseals in mijn 125
@oihibat76837 ай бұрын
Hello I loose all my keys for my vespa primavera 50 cm3 do u know how I can start it Before to loose I put the blockage system u know
@darrenwoodward48747 ай бұрын
Awesome mate thanks from Australia
@idkbirdman7957 ай бұрын
Doe Joe knoe de way hierzo
@lunantix7 ай бұрын
It's still chugging oil😂
@jcstuningltd6 ай бұрын
he missed the oil ring on the cylinder
@winstonhd682 ай бұрын
😂
@llesurFigueroa-lk3feАй бұрын
You got the wrong piston they make a big and small valvle of those motors think you got the low comp piston
@will1752723 күн бұрын
Might need new oil gide valves stop that smoking
@user-ii4pd3hr7k8 ай бұрын
if you dont mind me asking how tall are you
@_mazda_mx5_6 ай бұрын
He sounds Dutch, So probably pretty dang tall
@RoyoPitbike8 ай бұрын
Nice bike and repair !!
@xmarcus58649 ай бұрын
I defintely wouldve grabed one off the biggest bust for the price that i didnt say a word😂
@dilanpriyadarshana7499 ай бұрын
Great thanks❤
@jGraffi9 ай бұрын
You are starting by the end…..
@Zayjug11 ай бұрын
I ended with snapped wire and empty gas tank. Dude you helped me a lot! We should grab a beer if we ever meet!
@Builditathome-Restoration10 ай бұрын
Haha Amazing story. Good plan iam currently living in valencia spain
@Zayjug10 ай бұрын
@@Builditathome-Restoration we’re not that far away from each other. I’m in Poland
@henhax11 ай бұрын
This works really well and you helped my son get to work on his LX 50 as he needed petrol and was super pleased with his dad fixing it. Thank you - this is what KZread is for!
@Builditathome-Restoration11 ай бұрын
Good to hear henry thanks!
@yslrx11 ай бұрын
"street legal dirtbike" bro its just a moped 🤣
@appel59211 ай бұрын
What kind of oil did you use for the new cilinder? Just 4stroke oil?
@Builditathome-Restoration11 ай бұрын
10w40
@idyansuryanto Жыл бұрын
Mantap 💚💚
@kjve9009 Жыл бұрын
What tool do you use to take out the spark plug? All my plug removers are too beefy
@mclivin7222 Жыл бұрын
Calling the police or taking something that people spent a lot of time growing is just wrong I don't care whats legal or not but I'd take a few little buds and leave it alone
@kas4751 Жыл бұрын
Where did u get the new hardware at 5:58?
@Builditathome-Restoration Жыл бұрын
Local store
@darisshala2424 Жыл бұрын
Does it work on a piaggio zip?
@Builditathome-Restoration Жыл бұрын
Probably yes
@williamsherman1089 Жыл бұрын
Love the way that thing sounds
@austinmpoole Жыл бұрын
Who else is here because they saw a post about ignoring your girlfriend blah blah blah something. Starting a lawn mower at the bottom of the ocean, you allready know I had to look that shit up
@Builditathome-Restoration Жыл бұрын
Wait what? Can you send me where you found that i hear this alot but i didnt saw it myself
@Lengyell1 Жыл бұрын
Groetjes van uit Canada. Thank you for this video. I recently had the seat reupholstered and the locking mechanism was not reinstalled properly, so I could not get the seat open. I followed your guidance and, not unlike you, it took a few minutes to hook on to and release the locking mechanism. Most importantly, it worked.
@Builditathome-Restoration Жыл бұрын
Great to hear that the video helped you my mechanism was worn a bit so it was easy to get to the hook.
@vitocgn Жыл бұрын
Thanks bro! Worked with my et4. I had to push the back of the sattle down.
@kcgamingkc4836 Жыл бұрын
Hei I have a question. what is that thing called that you took off 1:29
@Builditathome-Restoration Жыл бұрын
that is the cam shaft gear
@jamesstuart9003 Жыл бұрын
I tried this on my ET4 and it’s not opening. Any tips?
@Builditathome-Restoration Жыл бұрын
Pull hard
@alamhadhbi5948 Жыл бұрын
no way you just cut the missing peace from the fender itself lol great job daw
@Builditathome-Restoration Жыл бұрын
Lol what fo you mean?
@livethecrazylife5779 Жыл бұрын
I am doing mine now it’s a o2
@Builditathome-Restoration Жыл бұрын
Great man make it good again! Iam currently working on the 1997 xr400 uploaded the video few weeks ago turned oud like new
@TopRevs Жыл бұрын
Nice bike! How is the power?
@Builditathome-Restoration Жыл бұрын
Decent power nothing like todays 250 s but it is a fun trail bike
Пікірлер
what size is that piston ? and won’t the compression change due to different depths of the piston ?
Where did you get a piston for 10 euros??
And it blew up after the second time riding it
I’m lowkey a bit pisses Idk what happend it was riding good until I shifted wrong then turned it off then it blew up
I had one jst gotnit
Helped me a lot thank you🙏
Wtf that was click bate. It showed a 250 2 stroke what happened??
It didnt fit so 125 chinese we went
how could you not see your fuel line is kinked
A fun engine fixup!
Sold it as is dont have to much space here
@@Builditathome-Restoration we all make choices.
So I took my dirtbike mudding and in the middle of the mud my dirtbike turned off and hasn’t started since I took my whole dirtbike apart dumped out all of the gas took my nibbi carburetor off cleaned it and I took my engine off and took the engine apart drain all the oil and then I put everything back together put new oil in it and new gas and it’s still not starting and now there’s something leaking out of my bike and idk what it is and it still won’t start and it has compression but not as good as it should do you know any reason why it wouldn’t be starting still or what would be leaking out of my engine?
You saw in the Video it was the cdi
Omg 😂thank you Bro!🎉
Thanks mate. Just lost my keys and I need to remove ecu, so that video helped me a lot!
Ich habe 2001 baujahr,ich libe diese Motorrad.
Zeer shön
YOU'RE MY HERO BRO!!
Great to hear that it helped you! Thanks!
It’s bogging when you rev it wide open check the valves and clean the carb out
I will try it.
OMG MAN U JUST SAVED MY ASS FROM SPENDING AT LEAST 60€ OR EVEN MORE!!! It didnt go like in this vid, becouse i have a diffrenet scooter, but it was VERY similar. First i didnt know what i was searching, but then i finaly saw it and all i had to do, was to give a cable a little push and BAM IN OPENED!!! THANK YOU VERY VERY MUCH MAN THANK YOU! HAVE A GREAT DAY MAN
Great to hear!
What exact wire should I use
A random spoke from an old bike but any kind of wire would do.
Is this a dry or wet sump?
Wet sump
so if you just buy 10w40 oil for a pitbike its good ? no matter wich engine, im new to this so idk much abt pit bikes
What if I don’t have a way to hone the barrel
Use 800 grid sand paper
Buy another one there like 20-30 quid
What size are the bigger wheels and tires?
I think 14 inch in the back 17 in front not 100 sure
I’m on my second 02’ zx6r. Love them. Also have a fireblade that I love equally. Cool vid thx!)
Thanks alot!
Kom je uit de buurt van coevorden ? Ik moet ook nieuwe klepseals in mijn 125
Hello I loose all my keys for my vespa primavera 50 cm3 do u know how I can start it Before to loose I put the blockage system u know
Awesome mate thanks from Australia
Doe Joe knoe de way hierzo
It's still chugging oil😂
he missed the oil ring on the cylinder
😂
You got the wrong piston they make a big and small valvle of those motors think you got the low comp piston
Might need new oil gide valves stop that smoking
if you dont mind me asking how tall are you
He sounds Dutch, So probably pretty dang tall
Nice bike and repair !!
I defintely wouldve grabed one off the biggest bust for the price that i didnt say a word😂
Great thanks❤
You are starting by the end…..
I ended with snapped wire and empty gas tank. Dude you helped me a lot! We should grab a beer if we ever meet!
Haha Amazing story. Good plan iam currently living in valencia spain
@@Builditathome-Restoration we’re not that far away from each other. I’m in Poland
This works really well and you helped my son get to work on his LX 50 as he needed petrol and was super pleased with his dad fixing it. Thank you - this is what KZread is for!
Good to hear henry thanks!
"street legal dirtbike" bro its just a moped 🤣
What kind of oil did you use for the new cilinder? Just 4stroke oil?
10w40
Mantap 💚💚
What tool do you use to take out the spark plug? All my plug removers are too beefy
Calling the police or taking something that people spent a lot of time growing is just wrong I don't care whats legal or not but I'd take a few little buds and leave it alone
Where did u get the new hardware at 5:58?
Local store
Does it work on a piaggio zip?
Probably yes
Love the way that thing sounds
Who else is here because they saw a post about ignoring your girlfriend blah blah blah something. Starting a lawn mower at the bottom of the ocean, you allready know I had to look that shit up
Wait what? Can you send me where you found that i hear this alot but i didnt saw it myself
Groetjes van uit Canada. Thank you for this video. I recently had the seat reupholstered and the locking mechanism was not reinstalled properly, so I could not get the seat open. I followed your guidance and, not unlike you, it took a few minutes to hook on to and release the locking mechanism. Most importantly, it worked.
Great to hear that the video helped you my mechanism was worn a bit so it was easy to get to the hook.
Thanks bro! Worked with my et4. I had to push the back of the sattle down.
Hei I have a question. what is that thing called that you took off 1:29
that is the cam shaft gear
I tried this on my ET4 and it’s not opening. Any tips?
Pull hard
no way you just cut the missing peace from the fender itself lol great job daw
Lol what fo you mean?
I am doing mine now it’s a o2
Great man make it good again! Iam currently working on the 1997 xr400 uploaded the video few weeks ago turned oud like new
Nice bike! How is the power?
Decent power nothing like todays 250 s but it is a fun trail bike