Пікірлер

• 
  @doonmuehlbach96633 күн бұрын

  Great feedback and tips to try. The furniture wax was a new one to me. Great Video!

• 
  @tommacdonald_official17 күн бұрын

  Come on....

• 
  @chiefcrazyhorse25 күн бұрын

  Where are you getting your measurements from? A close-up of where you are putting your tape measure would be helpful. Thank you

• 
  @denim1manАй бұрын

  You can check to see if there is a steel reinforced mullion with a magnet.

• 
  @irismckay6472Ай бұрын

  Great video. Thanks so much.

• 
  @keithalexander5998Ай бұрын

  Pledge works because it has silicone in the formula. That’s why it’s not great for furniture. That silicone builds up and creates a hazy build up.

• 
  @mannydiaz275Ай бұрын

  thank you sooooo much!

• 
  @richard94922 ай бұрын

  can't hear him

• 
  @robg.91143 ай бұрын

  Thanks so much for posting this. Fixed our issue of our glass sliding door getting stuck when closing and didn’t think of raising the casters. These Andersen doors are quite old and in 21 years of using them, we never had any problems until recently.

• 
  @rashidtayidi83703 ай бұрын

  You make this process so simple, thank you.

• 
  @michelemarch82703 ай бұрын

  Thank You🌸

• 
  @santafedave10514 ай бұрын

  Throw the damn door out and install energy efficient French doors . Due to the rolling feature of the door it’s very energy inefficient even if it’s new. Throw it out you won’t be disappointed you did!

• 
  @billpope95274 ай бұрын

  Where does one get replacedment double glazed glass panel?

• 
  @anthonypape68623 ай бұрын

  Loews will cut to your measurements. Mine was 32 x 32 $29

• 
  @gmikebarney5 ай бұрын

  Thank you so much for this very informative and simple approach to replacing an IGU!

• 
  @khaledali3585 ай бұрын

  Hey please I looking for a job I do before sliding door repair helper

• 
  @johngrabner5 ай бұрын

  Where does one get replacedment double glazed glass panel?

• 
  @billpope95274 ай бұрын

  Did you get a reply, or find a place to order them? If so, please post it.

• 
  @lazarocardenas24364 ай бұрын

  Wish they posted a link that would be so helpful. Im like ok i know how to install now where do i find the actual part too install

• 
  @nadirashaikh62655 ай бұрын

  Does pledge works becoz its not mentioned in pledge spray it can work on slides alimuim frame

• 
  @MikeVirgo-ut9zz5 ай бұрын

  Again ask the question why did the unit break down answer it lies in water. No attempt to test drainage won’t be long before it needs replacing again

• 
  @paulaao5 ай бұрын

  but what means in comparation u value of 1 and u value of 2? mean that with U value of 1 I have a reduction of 50% comparing to u value of 2?

• 
  @scenicnomad87446 ай бұрын

  Thanks for the info. Do you have any opinion about putting a strip of felt or some other thin insulation strip on the underside of the door for better insulation in the winter?

• 
  @StarlineWindowsTonyDeBonis6 ай бұрын

  Depends on the door type, some manufacturers have a mohair gasket that can be reinserted if the vent is removed, some have a bulb type gasket. Sounds like it could be worn/ flattened from usage. Best bet is to snap some pics or video and visit the supplier to see if they have some available, and instructions on how to replace it.

• 
  @scenicnomad87446 ай бұрын

  ​Great, thank you! I'm going to take it off the rail and check it out tomorrow and will go from there 👍

• 
  @karunald6 ай бұрын

  Since when are strike plates adjustable after they've been installed. Only 2 of the 4 screws have slots!

• 
  @StarlineWindowsTonyDeBonis6 ай бұрын

  Once a door is installed and set up properly, the 2 strike plate holes that are fixed are for 3" security fasteners.

• 
  @tubsboathouse7 ай бұрын

  Its not the track kzread.info/dash/bejne/lJiguZqNm87Yiqw.htmlsi=A9IWurtUh4DoGig4

• 
  @rankovranjes36707 ай бұрын

  Same people Cathey 450 for the one(1) pane???

• 
  @KyleHammerquist1557 ай бұрын

  We are having a ton of issues with our patio door in our condo that was installed by starline windows. The door was originally leaking and was repaired numerous times until it was finally fully deconstructed and reseated the area. After the fox it never really slid well partly because the tracks are on the outside and so hard to keep clean. Now take a better look and it’s not even on tue track. Super disappointed after all the work that was done to this door

• 
  @siveeshkm91397 ай бұрын

  I am interested pls contact no.

• 
  @salvadorzavala7748 ай бұрын

  This is great. My windows look all grainy / foggy. I was told the seal failed. How do I measure so I know what to order prior to replacing? Thank you and Happy Thanksgiving!

• 
  @StarlineWindowsTonyDeBonis7 ай бұрын

  Your sealed units sound like they have moisture in between them. Measuring can vary depending on the manufacture, but the best way would be is to remove the glazing stops, these are usually materials depending on composition of your windows that are either cut at 45 degree angles of straight cut that tap in that secure the glass into the frame against the tape. Not only is the width and height of the sealed units but the overall thickness usually 3/4" to 1".

• 
  @sarwarkhan23508 ай бұрын

  Sir i can apply your company vancouver canada ?

• 
  @sarwarkhan23508 ай бұрын

  On of the best company in canada❤

• 
  @MrSpt678 ай бұрын

  Thanks! This was extremely helpful !!!

• 
  @icooper52368 ай бұрын

  If you don't own a glazing spoon I'd use a scraper or putty knife rather than a chisel less damage to the profile

• 
  @shawnmcglasson49838 ай бұрын

  Thank you very much for your educational video saved me thousands of dollars!!!

• 
  @robinbennett2299 ай бұрын

  Not loud enough. Lack of close ups so one can see what you are doing.

• 
  @melinageofashion9 ай бұрын

  Thank you so much !!!!! That was very helpful best video I found !!!

• 
  @nheng69139 ай бұрын

  Nice, concise video. Lucky you though. I'm working on a dozen or more home windows that are 45 year old Rivco with wooden glazing strips held by LONG staples and 45 years worth of toughened glazing compounds :)

• 
  @StarlineWindowsTonyDeBonis10 ай бұрын

  Thanks for that and very good question, the last comment was very good, but not always possible if not labelled etc. The fool proof way is the lighter flame trick. The easiest way to explain this is to watch a you tube video and there are numerous (search how to test for Low e (flame trick). These short vids describe it hands on and very easy. Good luck!

• 
  @scottjohnson880110 ай бұрын

  Thank you for that information! You explained it perfectly well 😊

• 
  @JohnnyRawks10 ай бұрын

  Great video! About to do one of mine for a second time. Question: Is there a way to tell which way to install the sealed unit so that the LOW-E pane is on the correct side - exterior from what I understand.

• 
  @StarlineWindowsTonyDeBonis10 ай бұрын

  Thanks for that and very good question, the last comment was very good, but not always possible if not labelled etc. The fool proof way is the lighter flame trick. The easiest way to explain this is to watch a you tube video and there are numerous (search how to test for Low e (flame trick). These short vids describe it hands on and very easy. Good luck!

• 
  @JohnnyRawks10 ай бұрын

  @@StarlineWindowsTonyDeBonisAwesome. Thank you!!. Now I just have to figure out which way to install the sealed unit. Low e pane on the exterior or on the interior of the window. From what I'm seeing, it may not matter all that much. I'm in Southern Ontario Canada.

• 
  @carolhoule841010 ай бұрын

  I like your video. Thanks. I am looking for how to tighten the lock-unlock latch. It wiggles from side-to-side and I'd like to get it fixed before the snow comes

• 
  @StarlineWindowsTonyDeBonis10 ай бұрын

  Without seeing it would be difficult to know for sure, but there should be some fasteners that may just need to be tightened.

• 
  @rickloudermilk635110 ай бұрын

  very well explained. thank you.

• 
  @kevinmilligan552911 ай бұрын

  Great news I thought I could use petroleum jelly tried it didn't work as well as your suggestion, Thanks. 08/2023.

• 
  @lauriepayseur5897 Жыл бұрын

  We live Ocean front and the doors are FAR more heavy duty that the one in this video… does this same information apply to Hurricane rated doors?

• 
  @StarlineWindowsTonyDeBonis10 ай бұрын

  Difficult to say without knowing the product, but a heavier duty door could be a Lift and Slide instead of a typical slider, but Pledge would work on most friction points. Just like waxing ski's or a snowboard.

• 
  @america1st721 Жыл бұрын

  pledge worked, holy shit. TY is WD-40 also an option?

• 
  @angelaloseby6485 Жыл бұрын

  Can you say again what the name of the tape (blue on the roll)you were applying, thanks

• 
  @scrumthebum2451 Жыл бұрын

  63 years old not a professional machanic but worked on American cars and Harley’s for 40 years wth is a Robertson screw driver?

• 
  @ehdubz6048 ай бұрын

  its a canadian invention superior to slot and phillips heada. because of royalty rights, it has not been marketed well outside canada.

• 
  @scrumthebum24518 ай бұрын

  @@ehdubz604 Hard to believe I never heard of it. If I run across one can I buy one in USA ?

• 
  @jewittm5 ай бұрын

  @@scrumthebum2451they’re in many screwdriver bit sets, I have several sizes of them in my kobalt bit set (<$15). Also they’re common in electrical screw drivers.

• 
  @micheleklein9075 Жыл бұрын

  we have an Anderson slider with no screws at bottom like you show

• 
  @StarlineWindowsTonyDeBonis Жыл бұрын

  I am no expert on other manufacturers products, but some have adjustment screws on the end where we have or just inward on the interior face of the patio vents on the bottom of the style just above the door sill. Most patio rollers are adjustable and have an access adjustment screw. Maybe search your suppliers website for instructions. Hope this helps.

• 
  @daderespresenative Жыл бұрын

  Do u have videos replacing flush mount locks on french doors ?

• 
  @jesusecruzz Жыл бұрын

  Thank you, worked great!

• 
  @zuma457 Жыл бұрын

  Great informative video, thank you

• 
  @1Patient Жыл бұрын

  Most glass doesn't break.

• 
  @catsass9885 Жыл бұрын

  I can't find new glazing stop for our windows when the old window was taken out some of the glazing stop cracked every place I've looked and he wants to sell you a very large amount. We only need 24 feet.