Most of my video's are about fishing in my Pontoon Boat. Catching Sturgeon in an inflatable pontoon is a adrenalin rush. I also enjoy fishing for catfish and walleye. I hope you enjoy the video's.
Gotta try this with my traditions nipples. My cci #11 caps fall off, and i just got 1k on midway usa. So different caps isnt an option.
@efrey191117 күн бұрын
Your posts in hunting forums about your TX200 is what convinced me to plunk down my hard earned money for one. I’ve been forever grateful ever since. Thanks, Ron! Hey, what’s your son shooting here?
@idahoron17 күн бұрын
@efrey1911 congratulations! I've got 15K rounds through mine. I've put new seals and a new spring in it a couple times. I put in a new compression tube and piston this year. It shoots like a new rifle.
@idahoron16 күн бұрын
It's a crossman pump
@efrey191116 күн бұрын
@@idahoron thanks, Ron! I’d sure like to see more of your TX200 videos in the future, although I know filming can ruin the flow and specialness of a hunt. Be well, friend! 👍
@Chrissers20102 ай бұрын
The Treso nipples I have used have a very nice fit with a RWS #11 cap, in fact it has been a bit on the too snug side. Also, I take a #68 drill and open up the flash hole from 0.028" to 0.031".
@idahoron2 ай бұрын
That drill size is perfect for pyrodex
@tonycalp91622 ай бұрын
what is the barrel twist on your Green Moutain Barrel?
@idahoron2 ай бұрын
The 45s are 1-30 the 50's are 1-28
@KeithHierman2 ай бұрын
Thanks Ron
@shaunsian47842 ай бұрын
Was that an aftermarket barrel or did sand it or polish it to look stainless steel like
@idahoron2 ай бұрын
That barrel is a Green Mountain LRH stainless steel fast twist barrel. It's aftermarket.
@OntarioPrepper3 ай бұрын
Thanks for sharing this. great information and is easy to follow and understand ❤
@dermlover14 ай бұрын
Do you ever get sunburned while wearing this hat? Please be honest.
@idahoron4 ай бұрын
I'm not paid by the company. I paid for my hat, so I'm giving an honest review. It's a very good hat. I've never been sunburned. Not once
@arthurbretas20035 ай бұрын
Definitely making one for my XR200
@johnhoward72986 ай бұрын
What twist rate & barrel length & cal. do You recommend/ use ? to paper wrap bullet
@blueridgeboy77219 ай бұрын
The legend has a KZread channel so glad I finally found it. Idaho lewis brought me here.
@idahoron9 ай бұрын
Thanks for watching.
@Apexpurrfection9 ай бұрын
Too long. Where is the attack part
@blackhrt55079 ай бұрын
How does it effect the guns zero
@idahoron9 ай бұрын
I never had an issue with it.
@blackhrt55079 ай бұрын
@@idahoron my thought was Rideing on rough trails and constant vibration of the forks it might effect zero
@idahoron9 ай бұрын
@blackhrt5507 depending on the scope and mounts, your concerns are valid. That said. I've carried several rifles in this boot.
@kevinroberson198510 ай бұрын
P.S my long rifle is a green mountain barrel 40 cal. And the dia. Is .410 and my barrel length is 42 inch long. With a twist rate of 1 in 36 I hope and pray it will shoot long paper patch boolits. I'm only wanting to shoot at the maximum of 200 yards or a little more and I hope it will stabilize my boolits. Please let me know what you think about my barrel twist it is the only barrel at the time I could find in 40 cal. With that twist rate all the others were 1in48 twist rate . and I have a Pennsylvania Lancaster long rifle I built my self and it has pedasoli back sight and Lyman aperture front sight with a level bubble and like 10 or more apertures for it. I have spent a lot of money and time building this rifle and if it doesn't shoot real good I guess it will be a expensive wall hanger.
@idahoron10 ай бұрын
I would look at bullets in the 300 grain range. 400 will be too long. If you have a Lyman 17 style glove sight, use the Lee Shavers BPCR inserts. They are awesome
@idahoron10 ай бұрын
I was thinking 45 cal. On a .410 with a twist of 36, I think I would look at 200 gr to 250 gr.
@kevinroberson198510 ай бұрын
I'm so glad you told not to lube my paper patch boolits because I was having problems loading my bullets in my muzzle loader. Is it okay to lube the barrel after I push my bullet all the way down and seat it on my powder charge. And I mean a lite amount of lube in my barrel in front of my patched bullet?
@idahoron10 ай бұрын
You can. I don't worry about it for my stainless steel guns. I have lubed blue steel guns. I would test it to see how it affects the groups.
@scottbrightman366210 ай бұрын
Hello, I just put a Lyman receiver sight on my renegade 54 caliber percussion. I was just wondering if you can give me some advice please on how to site in this site. And I’m hoping it’s not too complicated and I’m hoping also it’s easy. thank you
@idahoron10 ай бұрын
So let me see if I understand you. You have a Lyman peep sight on your Renegade. Now you are inquiring how to sight it in. Is that correct?
@idahoron10 ай бұрын
Did you install a Lyman front sight or are you using the original TC Renegade sight?
@scottbrightman366210 ай бұрын
That is correct. I’m just wondering if I should put a Thompson center front site globe on it as well?
@scottbrightman366210 ай бұрын
@@idahoron I had installed number 57 receiver site by Lyman. From track of the wolf. Which, by the way, is an evil place. I can plank down a wad of cash and still be in thousand dollars in debt. Lol.
@idahoron10 ай бұрын
@scottbrightman3662 I installed the Lyman 17aml globe sights on several rifles. I use Lee Shavers BPCR inserts. You might need to shim the front of the Lyman 57sml peep to get it to travel vertically a bit better. On some tangs, they tend to lean forward a bit. Sighting in is pretty straightforward. Start at 50 yards and shoot.
@user-gd1rl8xw6f11 ай бұрын
Sugar Cube Creek comes through again.
@michaeleveleth797911 ай бұрын
Not sure if you remember me but I remember you. Found your page and was hoping you might sign on again. Good to here you voice!
@idahoron11 ай бұрын
I most certainly remember you!! In fact, I was just talking about you helping me with the fishing project. It's really good to hear from you!!
@idahoron11 ай бұрын
I am sorry about the quality. I'm using a new video editor.
@heatherlaskos8654 Жыл бұрын
So cool!!!
@99Victor Жыл бұрын
Where? What equipment are you using? Have gone more times or how often do you go?
@idahoron Жыл бұрын
Fox squirrels are all over South Idaho. We use air rifles.
@OMGWUNSIU Жыл бұрын
What about the small hole? did it function reliably on your gun?
@idahoron Жыл бұрын
For pyrodex P the hole has to be enlarged to .034
@Animalit55 Жыл бұрын
They do it for spawning
@t.c.2776 Жыл бұрын
pretty slick Ron...
@t.c.2776 Жыл бұрын
I don't understand how turning the head around gives you 5 speeds backwards... if you just turn the head around, so it's aimed towards the propeller that does not change forward or back in the switch... you still have 5 forward and 3 reverse... even if you just turn the whole unit around so the propellor is in the front and you run it in reverse to go forward, you still only have 3 reverse speeds to move you forward so doesn't really change anything.
@idahoron Жыл бұрын
When you turn the head 180 degrees now the motor is set up to pull backward with the tiller at your back. By switching it now you have 5 speeds dragging the boat backwards.
@AtlasVanderbelt Жыл бұрын
Is it rated for rovers?
@3jaragon Жыл бұрын
Awesome information 👍🏼
@jamesbowie8874 Жыл бұрын
Thanks for this video. Answered all of my questions about this method in 2 minutes. Do you need a fitting? No. Do you leave the valve button in? Yes. Do you top it up with a hand pump? Yes. Straightforward, no filler!
@dustinj76502 ай бұрын
thinking you can probably also get a 2nd one way H2(?) valve adapter - screw that in first, inflate, and then remove adapter, which will also keep the air in.
@dustinj76502 ай бұрын
ok I compared the two methods - having the valve open as shown in the video is much much quicker than using the H2 connector attached to the closed valve.
@austin5657 Жыл бұрын
I’m looking to replace my valves on my classic accessories pontoons as they broke this winter. I noticed your valve you showed had a yellow cap for the spring, is that the one built from the factory or an Amazon valve look alike? Classic accessories sells the valves for $25 and Amazon has similar valves for less but unsure which one works as they just are universal. Thanks!
@idahoron Жыл бұрын
That valve is actually one from outcast.
@mcboyz1173 Жыл бұрын
Watching this for pleasure be a squirrel are destroying everything
@michaeleveleth7979 Жыл бұрын
Hi Ron Michael Eveleth here just checking in
@idahoron Жыл бұрын
It's good to hear from you!!
@Porky186 Жыл бұрын
Thank you Ron, love all your videos…shorty
@toolman.dustin Жыл бұрын
thanks for sharing.
@kirkethridge2500 Жыл бұрын
i read that "creedmoor" shooters wrapped with wet paper, let them dry before shooting,,, didn't say anything about lube, so i assumed it was with water..???? Seems the paper patch bullet was the instrumental in the destruction of the american bison herd!! paper patching is much easier than lubing by hand!!! my new rice 45 barrel is going to be well tested with paper patched bullets!!
@Zeus_22 Жыл бұрын
Geez, by the end of the negotiation the guy selling it will be paying you to take it.
@idahoron Жыл бұрын
If it is in poor enough condition. Maybe they should pay to get rid of it.
@mpetrangelo Жыл бұрын
nice fix.
@thomastehan9477 Жыл бұрын
3/4 ID or 3/4 OD tubing?
@idahoron Жыл бұрын
ID
@thomastehan9477 Жыл бұрын
@@idahoron Thank you.
@John-gj1jr Жыл бұрын
Are those 3/4" or thereabouts in diameter?
@idahoron Жыл бұрын
Yes they are
@John-gj1jr Жыл бұрын
@@idahoron Thanks
@jcoats5529 Жыл бұрын
My Minn kota has 5 speeds in reverse. What your saying is that forward but turning the head 180 is more efficient? Really not following what you're saying
@idahoron Жыл бұрын
Most have 5 forward speeds and reverse. If you take the bolt out of the head and rotate 180 degrees, the tiller will be right behind you, pointing at your back. Now, it is set up to troll backward. You will have more flexibility with speed control. You will be able to fish hands-free by steering with your fins.
@dr.s.p. Жыл бұрын
Nice work.
@AyOutdoorTv Жыл бұрын
I we’ll love to go hunt out there
@mineadventures7938 Жыл бұрын
Beautiful camper. My only complaint would be, the interior is so impersonal, the colors. I have a 1988 I just purchased used. I got to remodel and give it personally. My other complaint, FWC does not answer their phone, so beware if you need help from FWC. I called ATC campers and they not only answer, they have parts, so screw FWC, they suck for taking care of customers.
@ArgoPower Жыл бұрын
6:16 why you are not using some marker instead to score the nipple with the cutter?
@catharinalausen6263 Жыл бұрын
And I saw if you want a new mone buy it!
@MrTrashRat Жыл бұрын
Balloon
@harlanwhitley5911 Жыл бұрын
Great idea, I see you are a float tube fisherman, I use a Outcast Fish Cat 4. Fun to fish in.
@jons5898 Жыл бұрын
👍
@michaelhrivnak17192 жыл бұрын
Great build on those shooting sticks! I need to learn how to use them.
@idahoron2 жыл бұрын
If you watch the video about my friend Mike. He never shoots rifles at all. He did well with my sticks.
@michaelhrivnak17192 жыл бұрын
A happy belated birthday to you, Idaho! Great video sir. Love that Hawken! I have two. Well, sort of. One .50 Hawken, one .54 Renegade. Neither as nicely set up as yours! Any concerns about reflection off that barrel? Beautiful rifle.
@idahoron2 жыл бұрын
None, the shine doesn't show I'm the sight picture.
@michaelhrivnak17192 жыл бұрын
@@idahoron Just curious! Your rifle barrel seemed to glow at 1:20 something into the video. But can't argue with success! And your rifle looks sharp.
@idahoron2 жыл бұрын
I guess what I'm saying is I don't see it when I'm shooting. It hasn't affected my shooting. It does reflect light and I'm sure in the right case an animal might see it. But if the animal can see the reflection, it's either an animal I don't want or it's dead 🤣🤣
Пікірлер
Gotta try this with my traditions nipples. My cci #11 caps fall off, and i just got 1k on midway usa. So different caps isnt an option.
Your posts in hunting forums about your TX200 is what convinced me to plunk down my hard earned money for one. I’ve been forever grateful ever since. Thanks, Ron! Hey, what’s your son shooting here?
@efrey1911 congratulations! I've got 15K rounds through mine. I've put new seals and a new spring in it a couple times. I put in a new compression tube and piston this year. It shoots like a new rifle.
It's a crossman pump
@@idahoron thanks, Ron! I’d sure like to see more of your TX200 videos in the future, although I know filming can ruin the flow and specialness of a hunt. Be well, friend! 👍
The Treso nipples I have used have a very nice fit with a RWS #11 cap, in fact it has been a bit on the too snug side. Also, I take a #68 drill and open up the flash hole from 0.028" to 0.031".
That drill size is perfect for pyrodex
what is the barrel twist on your Green Moutain Barrel?
The 45s are 1-30 the 50's are 1-28
Thanks Ron
Was that an aftermarket barrel or did sand it or polish it to look stainless steel like
That barrel is a Green Mountain LRH stainless steel fast twist barrel. It's aftermarket.
Thanks for sharing this. great information and is easy to follow and understand ❤
Do you ever get sunburned while wearing this hat? Please be honest.
I'm not paid by the company. I paid for my hat, so I'm giving an honest review. It's a very good hat. I've never been sunburned. Not once
Definitely making one for my XR200
What twist rate & barrel length & cal. do You recommend/ use ? to paper wrap bullet
The legend has a KZread channel so glad I finally found it. Idaho lewis brought me here.
Thanks for watching.
Too long. Where is the attack part
How does it effect the guns zero
I never had an issue with it.
@@idahoron my thought was Rideing on rough trails and constant vibration of the forks it might effect zero
@blackhrt5507 depending on the scope and mounts, your concerns are valid. That said. I've carried several rifles in this boot.
P.S my long rifle is a green mountain barrel 40 cal. And the dia. Is .410 and my barrel length is 42 inch long. With a twist rate of 1 in 36 I hope and pray it will shoot long paper patch boolits. I'm only wanting to shoot at the maximum of 200 yards or a little more and I hope it will stabilize my boolits. Please let me know what you think about my barrel twist it is the only barrel at the time I could find in 40 cal. With that twist rate all the others were 1in48 twist rate . and I have a Pennsylvania Lancaster long rifle I built my self and it has pedasoli back sight and Lyman aperture front sight with a level bubble and like 10 or more apertures for it. I have spent a lot of money and time building this rifle and if it doesn't shoot real good I guess it will be a expensive wall hanger.
I would look at bullets in the 300 grain range. 400 will be too long. If you have a Lyman 17 style glove sight, use the Lee Shavers BPCR inserts. They are awesome
I was thinking 45 cal. On a .410 with a twist of 36, I think I would look at 200 gr to 250 gr.
I'm so glad you told not to lube my paper patch boolits because I was having problems loading my bullets in my muzzle loader. Is it okay to lube the barrel after I push my bullet all the way down and seat it on my powder charge. And I mean a lite amount of lube in my barrel in front of my patched bullet?
You can. I don't worry about it for my stainless steel guns. I have lubed blue steel guns. I would test it to see how it affects the groups.
Hello, I just put a Lyman receiver sight on my renegade 54 caliber percussion. I was just wondering if you can give me some advice please on how to site in this site. And I’m hoping it’s not too complicated and I’m hoping also it’s easy. thank you
So let me see if I understand you. You have a Lyman peep sight on your Renegade. Now you are inquiring how to sight it in. Is that correct?
Did you install a Lyman front sight or are you using the original TC Renegade sight?
That is correct. I’m just wondering if I should put a Thompson center front site globe on it as well?
@@idahoron I had installed number 57 receiver site by Lyman. From track of the wolf. Which, by the way, is an evil place. I can plank down a wad of cash and still be in thousand dollars in debt. Lol.
@scottbrightman3662 I installed the Lyman 17aml globe sights on several rifles. I use Lee Shavers BPCR inserts. You might need to shim the front of the Lyman 57sml peep to get it to travel vertically a bit better. On some tangs, they tend to lean forward a bit. Sighting in is pretty straightforward. Start at 50 yards and shoot.
Sugar Cube Creek comes through again.
Not sure if you remember me but I remember you. Found your page and was hoping you might sign on again. Good to here you voice!
I most certainly remember you!! In fact, I was just talking about you helping me with the fishing project. It's really good to hear from you!!
I am sorry about the quality. I'm using a new video editor.
So cool!!!
Where? What equipment are you using? Have gone more times or how often do you go?
Fox squirrels are all over South Idaho. We use air rifles.
What about the small hole? did it function reliably on your gun?
For pyrodex P the hole has to be enlarged to .034
They do it for spawning
pretty slick Ron...
I don't understand how turning the head around gives you 5 speeds backwards... if you just turn the head around, so it's aimed towards the propeller that does not change forward or back in the switch... you still have 5 forward and 3 reverse... even if you just turn the whole unit around so the propellor is in the front and you run it in reverse to go forward, you still only have 3 reverse speeds to move you forward so doesn't really change anything.
When you turn the head 180 degrees now the motor is set up to pull backward with the tiller at your back. By switching it now you have 5 speeds dragging the boat backwards.
Is it rated for rovers?
Awesome information 👍🏼
Thanks for this video. Answered all of my questions about this method in 2 minutes. Do you need a fitting? No. Do you leave the valve button in? Yes. Do you top it up with a hand pump? Yes. Straightforward, no filler!
thinking you can probably also get a 2nd one way H2(?) valve adapter - screw that in first, inflate, and then remove adapter, which will also keep the air in.
ok I compared the two methods - having the valve open as shown in the video is much much quicker than using the H2 connector attached to the closed valve.
I’m looking to replace my valves on my classic accessories pontoons as they broke this winter. I noticed your valve you showed had a yellow cap for the spring, is that the one built from the factory or an Amazon valve look alike? Classic accessories sells the valves for $25 and Amazon has similar valves for less but unsure which one works as they just are universal. Thanks!
That valve is actually one from outcast.
Watching this for pleasure be a squirrel are destroying everything
Hi Ron Michael Eveleth here just checking in
It's good to hear from you!!
Thank you Ron, love all your videos…shorty
thanks for sharing.
i read that "creedmoor" shooters wrapped with wet paper, let them dry before shooting,,, didn't say anything about lube, so i assumed it was with water..???? Seems the paper patch bullet was the instrumental in the destruction of the american bison herd!! paper patching is much easier than lubing by hand!!! my new rice 45 barrel is going to be well tested with paper patched bullets!!
Geez, by the end of the negotiation the guy selling it will be paying you to take it.
If it is in poor enough condition. Maybe they should pay to get rid of it.
nice fix.
3/4 ID or 3/4 OD tubing?
ID
@@idahoron Thank you.
Are those 3/4" or thereabouts in diameter?
Yes they are
@@idahoron Thanks
My Minn kota has 5 speeds in reverse. What your saying is that forward but turning the head 180 is more efficient? Really not following what you're saying
Most have 5 forward speeds and reverse. If you take the bolt out of the head and rotate 180 degrees, the tiller will be right behind you, pointing at your back. Now, it is set up to troll backward. You will have more flexibility with speed control. You will be able to fish hands-free by steering with your fins.
Nice work.
I we’ll love to go hunt out there
Beautiful camper. My only complaint would be, the interior is so impersonal, the colors. I have a 1988 I just purchased used. I got to remodel and give it personally. My other complaint, FWC does not answer their phone, so beware if you need help from FWC. I called ATC campers and they not only answer, they have parts, so screw FWC, they suck for taking care of customers.
6:16 why you are not using some marker instead to score the nipple with the cutter?
And I saw if you want a new mone buy it!
Balloon
Great idea, I see you are a float tube fisherman, I use a Outcast Fish Cat 4. Fun to fish in.
👍
Great build on those shooting sticks! I need to learn how to use them.
If you watch the video about my friend Mike. He never shoots rifles at all. He did well with my sticks.
A happy belated birthday to you, Idaho! Great video sir. Love that Hawken! I have two. Well, sort of. One .50 Hawken, one .54 Renegade. Neither as nicely set up as yours! Any concerns about reflection off that barrel? Beautiful rifle.
None, the shine doesn't show I'm the sight picture.
@@idahoron Just curious! Your rifle barrel seemed to glow at 1:20 something into the video. But can't argue with success! And your rifle looks sharp.
I guess what I'm saying is I don't see it when I'm shooting. It hasn't affected my shooting. It does reflect light and I'm sure in the right case an animal might see it. But if the animal can see the reflection, it's either an animal I don't want or it's dead 🤣🤣
Nice sticks. Thanks for showing us