Пікірлер

• 
  @barcharlieКүн бұрын

  I'm very interested in the soda water canning. Did you store it and drink it later and if so was it still fresh and fizzy? Anything else you can tell me about canning soda water?

• 
  @PortlyGentlemanКүн бұрын

  It works fine. It'll stay fresh for quite a while 🍻

• 
  @Rubberduck-tx2bh3 күн бұрын

  Some "pro tips" I've learned over the years: Turbo Yeast was designed for making ethanol fuel FAST (i.e. stressed out yeast). It's not very good at making palatable spirits. You can clean the packing in place with a vinegar run. But foreshots & early heads (which you toss anyway) do that also. You can get "neutral-ish" in 1x distillation, but doing several stripping runs & then a spirit run will make it better. And since you're making beer already, do a sugarhead on the spent grains (~8 lbs/5 gal water). Makes a fine whiskey! Especially if you invert the sugar. I have a Franziskaner whiskey that is getting pretty phenomenol after only 6 months on oak.

• 
  @PortlyGentleman3 күн бұрын

  Thank you very much I really appreciate it 🍻🍻

• 
  @gerber89154 күн бұрын

  I wish I was still into brewing beer. The now Ex-W made me get rid of all my equipment because she didn't like my hobby. Wish I got rid of her first, 😂😂

• 
  @PortlyGentleman4 күн бұрын

  💯😂

• 
  @africantwin1739 күн бұрын

  Please, no more dark vids. Thank you sirr.

• 
  @PortlyGentleman7 күн бұрын

  🍻🍻

• 
  @Cutterman_fixer10 күн бұрын

  Do you have a problem with your pro lid gasket coming off or leaking? I cannot get mine to seal and it always pops into the kettle. The lid also is a tight fit onto the kettle. Like it has to be pushed on as the lip of the kettle scrapes against the lip of the lid. I'm not sure if this is just a problem with mine or all. It cannot be used for distillation as it doesn't seal.

• 
  @Jimsmith65610 күн бұрын

  cant wait to watch your vids of using it. Im a brewer myself and have been looking at getting this. At this stage i dont want a big setup to run with my brewzilla. Just hoping to make a bottle every now and then so this would be perfect

• 
  @PortlyGentleman7 күн бұрын

  Hopefully I'll have the first of those videos out in the next week or two 🍻🍻

• 
  @josefchesney347710 күн бұрын

  Nice disclaimer

• 
  @PortlyGentleman10 күн бұрын

  🍻🍻

• 
  @themaltmiller843811 күн бұрын

  LOVE IT!! Can't wait to see your journey with the AirStill Pro, we love it - for distilling water obviously! Thanks for the mention!! 😉

• 
  @PortlyGentleman11 күн бұрын

  It's my pleasure and thank you very very much 🍻🍻🍻

• 
  @CTP-bbq-HundHutte11 күн бұрын

  Mine makes awesome distilled water.

• 
  @PortlyGentleman11 күн бұрын

  Yes 💯🍻

• 
  @jasonmhite11 күн бұрын

  Thanks for the video! Some minor feedback: the music is a bit loud it kinda drowns out your voiceover.

• 
  @PortlyGentleman11 күн бұрын

  I would agree. I got that audio level a little high 🍻

• 
  @RiggerBrew11 күн бұрын

  I use the regular AirStill for making water for my CPAP. Works great!

• 
  @PortlyGentleman11 күн бұрын

  I'd chucked that up to one of its mini uses 🍻

• 
  @biggirlollie11 күн бұрын

  Mmmm shine ☀️

• 
  @PortlyGentleman11 күн бұрын

  🍻🍻💯

• 
  @Maddogmaddenbrewing11 күн бұрын

  What’s the little bag of teeth for?

• 
  @PortlyGentleman11 күн бұрын

  Lol those are ceramic boil enhancers

• 
  @patrickglaser156012 күн бұрын

  So many parts, nooks and crannies to clean, but they're worth it for brew quality.

• 
  @PortlyGentleman12 күн бұрын

  🍻🍻

• 
  @shannonwilliams774312 күн бұрын

  There was some awesome advice provided on this channel. Ill start checking the communities for single vessel brewing and other items thanks.

• 
  @PortlyGentleman12 күн бұрын

  Thank you very much 🍻🍻🍻

• 
  @alexfinnegan903112 күн бұрын

  Dude, solid info on the adjustments needed. Thank you

• 
  @PortlyGentleman12 күн бұрын

  Of course, I do believe it's gotten a little better over the years Keep that in mind 🍻

• 
  @brucecampbell835512 күн бұрын

  One of may favorite recipes (and beers) - it's fun to try different yeasts on it, too! The Verdant IPA yeast makes it really dry and a little hazy - I called it Hazy Hog.

• 
  @PortlyGentleman12 күн бұрын

  That sounds pretty good 🍻🍻

• 
  @raphaeldrihem351513 күн бұрын

  hey! where did you get your recirculation maniflod? thanks

• 
  @PortlyGentleman13 күн бұрын

  Here's a link to it. What type of system are you using it in ? www.morebeer.com/products/ss-brewtech-mash-recirculation-manifold.html?a_aid=PortlyGentleman

• 
  @WarTortoiseGaming13 күн бұрын

  Does it have a US plug, or did you need to use some sort of adapter on the Australian plug?

• 
  @PortlyGentleman13 күн бұрын

  I didn't cover this but it comes with a power cord. Once it's available in the States it will come with a United States plug.. as is I'm sure with every market it's going to be sold in.

• 
  @WarTortoiseGaming12 күн бұрын

  @@PortlyGentleman I’m looking to import one from Australia since it looks like they won’t be available in Canada for a while. Is it possible to use the Australian plug with a simple travel adapter, or is something else required because they use 240V in Australia?

• 
  @PortlyGentleman12 күн бұрын

  @@WarTortoiseGaming absolutely you can get an adapter. It's 24 volt power supply

• 
  @Adamantos-Elean14 күн бұрын

  could you use this in a garage?

• 
  @PortlyGentleman14 күн бұрын

  I don't think I would. You definitely want to wait to vent

• 
  @GandalfWhitest14 күн бұрын

  The bubbling of the tomatoes is actually boiling... it occurs when the vapour pressure of the water equals/exceeds the ambient pressure. That's why water boils at a lower temperature high up in the mountains where atmospheric pressure is less than sea-level. In the case of this chamber vacuum machine, water will begin to boil when the pressure reaches 2.67 kPa (0.387 psi) and the temperature is 22 C (72F). Atmospheric (ambient) pressure at sea-level is 101.4 kPa (14.7 psi).

• 
  @PortlyGentleman14 күн бұрын

  Yes

• 
  @user-eu9bk7xq4t14 күн бұрын

  Just started watching your channel. Although your equipment is much more sophisticated than mine, you give a great viewer experience! You pack in quite a bit of information.

• 
  @PortlyGentleman14 күн бұрын

  Thank you very much 🍻🍻

• 
  @beattyj815 күн бұрын

  Commenting to boost the algorithm and because I love these. Also, I know it's an edge case, but any chance that brewbuilt X3 will fit in the RAPT fermentation fridge? Still happy with my Spike CF10 in there, but that band clamp around the whole body of it is eventually gonna give out and an 8" tri-clover looks niiiiice.

• 
  @beattyj815 күн бұрын

  Nevermind, found the dimensions. Sadly just a bit too rotund to fit width-wise but fine height-wise. I resemble that shortcoming too, so no harm no foul. :D Beer looks amazing and since Pliny is a favorite on my rotation, adding this one as well.

• 
  @PortlyGentleman7 күн бұрын

  🍻🍻

• 
  @RichardDePas16 күн бұрын

  Like seeing the Brewzilla in action. Taken me 5 or 6 brews in my 35L to get the process dialed in. Kegland's CIP cleaning head makes that process a snap.

• 
  @PortlyGentleman16 күн бұрын

  No doubt it's not a whole world going from my 65 l Brewzilla to the 100 l. There are some subtle differences that need to be accounted for though. 🍻🍻

• 
  @lesliestaines939116 күн бұрын

  I was looking at the recipe to brew this blind pig, IPA and notice 2 ounces of magnum at 60 minutes when you put this into BeerSmith it comes up very high on the IBU is that 2 ounces correct because I cut it down to 1 ounce and I have the same IBU at the end of the brew😅

• 
  @PortlyGentleman16 күн бұрын

  Hops and ibus is a whole other topic. My friend don't even get me started. Hop utilization is a strange thing. It depends on your system greatly lol

• 
  @scottcarr998516 күн бұрын

  🕶 🐖 🍺 👂 😋

• 
  @PortlyGentleman16 күн бұрын

  You know it 🍻

• 
  @blackwoodbrews16 күн бұрын

  I would love to see a Russian River Happy Hops kit. Great video as always 🍻

• 
  @PortlyGentleman16 күн бұрын

  You and me both 🍻

• 
  @wd635816 күн бұрын

  Looks great. Might have to try it

• 
  @PortlyGentleman16 күн бұрын

  I highly recommend it 🍻

• 
  @richardnewton505716 күн бұрын

  Awesome system and video.

• 
  @PortlyGentleman16 күн бұрын

  Thank you 🍻

• 
  @rhyn043617 күн бұрын

  Where did you get the sanitizing spray bottle?

• 
  @PortlyGentleman16 күн бұрын

  Startsan well Eat the stock tubing It's pretty easy to take it apart and change it out. I'll link it below. amzn.to/3VFFjfY

• 
  @rhyn043616 күн бұрын

  @@PortlyGentleman Thanks!

• 
  @alamokid922217 күн бұрын

  🍻

• 
  @PortlyGentleman17 күн бұрын

  Thank you

• 
  @stevenmcmaster17 күн бұрын

  How about you look at ss brew tech chronical. Not saying the brewbuilt isn’t good but let’s see them both head to head.

• 
  @PortlyGentleman17 күн бұрын

  I would agree that'd be a good video 🍻

• 
  @craftcostanza632217 күн бұрын

  7:01 That's what she said

• 
  @PortlyGentleman17 күн бұрын

  Yes🍻🍻

• 
  @quilde17 күн бұрын

  Might need to check some spelling on the titles but otherwise, great video 😂

• 
  @PortlyGentleman17 күн бұрын

  Thank you

• 
  @alfonsoramirez691117 күн бұрын

  I really enjoy your videos which brewzilla would you recommend 110v or 220v

• 
  @PortlyGentleman17 күн бұрын

  Thank you, If you can do 240 volts that's the way to go 🍻

• 
  @ElementaryBrewingCo17 күн бұрын

  Cheers 🍻

• 
  @PortlyGentleman17 күн бұрын

  💯

• 
  @kennethd.94117 күн бұрын

  Great Video! Just made this Blind Pig MoreBeer kit just a month ago and it is drinking amazing. 3:46 "Mashimg"

• 
  @PortlyGentleman17 күн бұрын

  Yes, it does 🍻🍻

• 
  @biggirlollie17 күн бұрын

  One of my favorites! 🍻

• 
  @PortlyGentleman17 күн бұрын

  Yes

• 
  @oliverpermezel317417 күн бұрын

  Epic video bud! The wide mash tun makes lautering so much easier in the 100L. Still love my 65's though :)

• 
  @PortlyGentleman17 күн бұрын

  Thank you very much 🍻 I would agree 💯

• 
  @justonbrazda384617 күн бұрын

  These do not come with the 2 small cubbies anymore.

• 
  @PortlyGentleman17 күн бұрын

  That's too bad and I bet the price is probably the same

• 
  @justonbrazda384617 күн бұрын

  @@PortlyGentleman sure is. Teslas great customer service simply said let us know if you want to set up a return.

• 
  @PortlyGentleman17 күн бұрын

  🤣

• 
  @peppe145021 күн бұрын

  Sad with companies that steal ideas from others. I would never buy kegland's products

• 
  @PortlyGentleman20 күн бұрын

  I get your point. Having said that, competition breeds innovation that will benefit all of us. I'm wondering 🤔 are you using a Motorola cell phone as they released the first cell phones? 🍻🍻🍻

• 
  @andrevangijsel95724 күн бұрын

  How does it compare to the duofiller gen3?

• 
  @PortlyGentleman24 күн бұрын

  That's going to be an interesting video 🍻

• 
  @jwjones218926 күн бұрын

  I had a Duofiller, sold it, and my canner because it was an endless source of frustration. I imagine this will be a great solution.

• 
  @PortlyGentleman26 күн бұрын

  What did you find? Most frustrating ?

• 
  @jwjones218926 күн бұрын

  @@PortlyGentlemanmostly the calibration aspect. It was not worth banging out anything less than a whole batch because of the time & beer waste. It wasn’t a good fit in my brewery. Worth stating that my DF was an early V1, and I missed the pinch valve upgrade.

• 
  @kaarenv197626 күн бұрын

  CopyLand

• 
  @PortlyGentleman26 күн бұрын

  😮‍💨

• 
  @beerbarnbrewing916026 күн бұрын

  This appears to solve some of my struggles with the duofiller.

• 
  @PortlyGentleman26 күн бұрын

  I can see that there's also some issues that it's going to solve that haven't yet been disclosed I'm pretty sure 🍻🍻

• 
  @andrevangijsel95724 күн бұрын

  What struggles I am considering one?

• 
  @beerbarnbrewing916023 күн бұрын

  @@andrevangijsel957 I have struggled with calibration. I need to spend more time with it though.

• 
  @PortlyGentleman23 күн бұрын

  Definitely the display makes it easier 🍻

• 
  @beerbarnbrewing916023 күн бұрын

  @@PortlyGentleman That’s what I took away from your review.

• 
  @blackwoodbrews26 күн бұрын

  Looks like a new toy I need to go with my Cannular Pro. 🍻

• 
  @PortlyGentleman26 күн бұрын

  They definitely go together quite well 🍻🍻

• 
  @Hallslys26 күн бұрын

  I know kegland is known for knocking off other manufacturers products, but this filler is probably some of the worst i've seen. It's a blatant ripoff of the duofiller/monofiller.

• 
  @PortlyGentleman26 күн бұрын

  Ok ...... 🍻

• 
  @smallbatchbrewingco567526 күн бұрын

  Great , need to ship to the uk , we would be interested 🔥

• 
  @PortlyGentleman26 күн бұрын

  I'd start checking with the MaltMiller immediately 🍻🍻

• 
  @DavidHeathHomebrew26 күн бұрын

  Nicely done Bradley. I need to get my review done yet, ive been waiting on European release. You made some great points 🍻🍻🍻

• 
  @PortlyGentleman26 күн бұрын

  I can't wait to watch it! Hopefully it's availability is sooner than later everywhere. Thank you 🍻🍻