Пікірлер

• 
  @DailyDoseOfStories-fb6prКүн бұрын

  Another easy way to rack the slide is pull the hammer down and rack the slide via the way you showed it will not be as hard cause when you rack the slide you are only pulling the slide spring not the hammer spring

• 
  @matthewrobak40132 күн бұрын

  so 36m would be unsafe? or is it doable and safe lol

• 
  @kellyphillips97703 күн бұрын

  How will you know whether they changed powder or not in the future? I just bought ammo inc. stealth 9mm 147 grain a few days ago. Before seeing this video I thought shooting this subsonic stuff was a little gassy and it did leave that yellow grain crap all in the insides of my Scorpion. I guess I can deal with it.

• 
  @angelvaleriano_3 күн бұрын

  Thinking of buying my first sidearm. This was a helpful video. Thank you.

• 
  @deemillitv37333 күн бұрын

  what if my slide is hard to put back on I have a glock

• 
  @bench1753 күн бұрын

  Make sure the metal piece that sticks up from the frame goes through the slot in the back of the slide as you slide it back on. Otherwise not sure

• 
  @eemm42674 күн бұрын

  Would that fit in the micro p365 9mm???

• 
  @suasponte62305 күн бұрын

  why compare to anything Glock anymore. only soy boys buying their first firearm buy Outdated, overpriced Glocks. compare the CZ to something more contemporary.

• 
  @TheRoadToGM7 күн бұрын

  My ghost pro 3.3 hasnt failed yet after 2000 rds. I use it for edc and competition. Still waiting on the automatic feature i often read about😂 So far so good🤞

• 
  @bench1757 күн бұрын

  @@TheRoadToGM thanks for sharing

• 
  @Sivakumar-v3z9 күн бұрын

  அருமையான விளக்கம் வாழ்த்துக்கள்

• 
  @richcity181210 күн бұрын

  I assume this works with the 10mm Banshee as well? I have one in 10mm and looking to put a can on it but don’t know which way to attach it with no issues

• 
  @bench1759 күн бұрын

  Yes but that might require the top end 20lbft or maybe the book mentions how much for their 45 caliber version. I can check

• 
  @thickwristmcfist339910 күн бұрын

  Pretty sweet rig!

• 
  @bench17510 күн бұрын

  Thanks 👍

• 
  @RyeOnHam10 күн бұрын

  For $514, forget it, but it looks like a good receiver.

• 
  @bench17510 күн бұрын

  @RyeOnHam That's what I thought, but I figured it's for all my uppers. If I could buy the best handgun and share the frame with my other handguns, 500 is not that much.

• 
  @JuanHernandez-pq6nb10 күн бұрын

  Ohh sweet

• 
  @bench17510 күн бұрын

  thanks

• 
  @user-me1ui1ym9p12 күн бұрын

  Can u do prizm black vs prizm gray on Oakley regular please I can’t find a video anywhere

• 
  @bench17512 күн бұрын

  @user-me1ui1ym9p The gray are just a less dark version of the black

• 
  @user-me1ui1ym9p12 күн бұрын

  @@bench175 ok I’ll just go with gray thank you

• 
  @JuanHernandez-pq6nb12 күн бұрын

  Cool thanks

• 
  @bench17512 күн бұрын

  @@JuanHernandez-pq6nb welcome

• 
  @thickwristmcfist339912 күн бұрын

  Nice! How do you plan on repairing the black finish on the polished parts after the repair/customization? Are those end plates aluminum or steel? I have a bottle or 2 of Alumihyde hanging around... Stuff works amazingly!!!

• 
  @bench17512 күн бұрын

  @@thickwristmcfist3399 Im gonna try a flat black paint pen. They're steel.

• 
  @DogeMcLovin12 күн бұрын

  @thickwristmcfist3399 Cold blue solutions such a birchwood super blue or dicropan T-4 works nicely!

• 
  @DogeMcLovin13 күн бұрын

  Anderson integrated trigger guard lowers are pretty nice. Gives me piece of mind I won't break an ear off driving a roll pin in!

• 
  @bench17513 күн бұрын

  @DogeMcLovin Ya I have a couple lowers like that. Didn't know Anderson made one I use the trick of using some playing cards under the ear to prevent snapping them. Worked every time so far.

• 
  @thickwristmcfist339913 күн бұрын

  @@bench175 What playing card trick for the ears??? Never heard of such a thing? Gotta link??

• 
  @DogeMcLovin13 күн бұрын

  @@thickwristmcfist3399 Around the 3 minute mark: kzread.info/dash/bejne/eWVmw6yEebSvcco.html

• 
  @bench17512 күн бұрын

  @@thickwristmcfist3399 Skip to 3:30 kzread.info/dash/bejne/eWVmw6yEebSvcco.html&ab_channel=ARBuildJunkie

• 
  @thickwristmcfist339913 күн бұрын

  As always, a perfectly sensible review of common gear. Thanks!

• 
  @bench17513 күн бұрын

  @@thickwristmcfist3399 No you're perfect

• 
  @thickwristmcfist339913 күн бұрын

  @@bench175 All the fat girls agree... *shrug *

• 
  @535tony14 күн бұрын

  Stock has a QD point, nice. Does the hand guard have QD? Looks like a good deal.

• 
  @lynndale598514 күн бұрын

  Do you have to have a motorcycle license

• 
  @dennischi610715 күн бұрын

  Well how accurate is it? The other reviewers seem like they are shills and Mr. Guns and gear and Honest outlaw don't want to review cheap stuff. BTW i bought an Anderson barrel from P/A and it shot like crap. 5" at 100 yards off bags and with a scope. They sent me a new one after 8 weeks, the new one is 8" at 100. 3 PSA builds, 2 BA barrels, 1 Faxon, 2 WOA, 3 S&W, 1 Zion, 1 DPMS and 50 FN's at work. Everyone of them shoots 3.5" or better at 100 yards.

• 
  @bench17513 күн бұрын

  @dennischi6107 Thanks for heads up. Unfortunately I got a good offer on the Anderson and sold it before I got to check. What ammo did you try in it?

• 
  @dennischi374611 күн бұрын

  Federal m193. I know its 3moa ammo but every barrel and rifle i listed does anywhere from 1.5 to 3" with it with mulitiple 5 shot groups with 20 different barrels. Most ar15s i test do around 2.75" with it. I get it free so thats what i practice with.

• 
  @bench17510 күн бұрын

  @@dennischi3746 It'd be awesome if you uploaded your accuracy tests. I'd definitely subscribe. Those are nice groups with M193

• 
  @paulbouverette50315 күн бұрын

  I bought and sold a Bergman 400 the seat was horrible, the seat is angled forward, stupid design, I have a Honda Helix and boy so comfortable

• 
  @bench17512 күн бұрын

  @@paulbouverette503 nice

• 
  @darrellgerrard97316 күн бұрын

  Same issue for my MK4 9mm Banshee. Less than 200 rnds and it puked!

• 
  @bench17513 күн бұрын

  @darrellgerrard973 I also have a video on replacing the ejector spring if either feel weak on yours. My Banshee has been running great since. kzread.info/dash/bejne/g62FydGJYaWZaJs.htmlsi=gvxidZYEH-xFaNke

• 
  @kcgfy8116 күн бұрын

  I just mounted a 507k on my P365 and something strange happened. When I went to thumb tighten the screws to test the thread fitment one of them wouldn't go in without resistance. Out of fear of cross threading it I back it out and check the hole visually and noticed some gunk so I flip the slide upside down and a whole bunch of shavings or small pellets fell out of the hole! What could it be? I took a magnetic bit to it and to my shock they are ferrous. I have only had the P365 for a month and put only 300 rounds through it. None of my other handguns have this.

• 
  @bench17512 күн бұрын

  @@kcgfy81 No idea how stuff got in there. I thought it's a sealed area

• 
  @thickwristmcfist339916 күн бұрын

  Why the different types of tape on each side? i think that some clear nail polish or super glue might work as a field expedient repair for those loose pins. CHY-NA is asshoe.

• 
  @bench17516 күн бұрын

  Just out of curiosity if either tape will give out before the other. Gorilla claims it's permanent tape.

• 
  @BennyBlancofrmtheBx16 күн бұрын

  Shoot I've got two real sba3 braces that I removed and replaced with stocks on my ARs in my closet collecting dust if I knew you was in the market I would have sold them to you

• 
  @bench17516 күн бұрын

  It's cool. So when I bought the first clone and liked it better than the real deal, I sold a couple real ones at 50 a piece. Now I kinda regret it, but I also have a couple real braces collecting dust.

• 
  @MorningTurd5 күн бұрын

  @BennyBlancofrmtheBx how much

• 
  @BennyBlancofrmtheBx5 күн бұрын

  @@MorningTurd $50 each

• 
  @johnhammel62774 күн бұрын

  @@BennyBlancofrmtheBxthat with shipping

• 
  @BennyBlancofrmtheBx4 күн бұрын

  @@johnhammel6277 no my brother shipping would be extra

• 
  @ghostking916317 күн бұрын

  Any tips for persons who are nervous when holding one?

• 
  @bench17516 күн бұрын

  @@ghostking9163 Memorize rules of safe gun handling. practice handling and all operations with snap caps (dummy rounds).

• 
  @ghostking916316 күн бұрын

  @@bench175 practice but it’s like when holding it and am not talking by my self Am talking like doing a session in front of other persons Hands start shaking and gets sweating? Why is that so?

• 
  @cypher602217 күн бұрын

  So, just to let you know, the larue triggers are molded now instead of precision milled and that's because all the people that knew how to do the precision milling don't work there no more due to mark larue firing those that knew the techniques to milling those triggers. He now has yes people working for him that have no clue what they are doing, so you're better off with anything else other than a larue trigger and mount. Ijs.

• 
  @bench17517 күн бұрын

  @@cypher6022 I hate when companies change the product and use the same model number. When you say now, do you know when that change happened?

• 
  @cypher602217 күн бұрын

  @bench175 the change happened when darrel, the lead engineer, was still employed there. Early to mid 2023.

• 
  @wamanicharlton18 күн бұрын

  How to shoot it with out any difficulties(all the techniques)

• 
  @bench17518 күн бұрын

  @@wamanicharlton Here are my tips kzread.info/dash/bejne/pImbtrKFqLaYeso.htmlsi=XdpIYHbUIFaHkVf1

• 
  @babaganoosh196919 күн бұрын

  You get personalized licence plates... You're dead ...

• 
  @bench17519 күн бұрын

  that's obvious

• 
  @thickwristmcfist339920 күн бұрын

  I use some heavy duty degreaser that is safe for aluminum... Never thought about CLR... Thanks for the tip!

• 
  @dang124gaming20 күн бұрын

  The genuine reason why am watching this is because of movies of badass people using handguns, i have zero idea how guns actually work so im watching this, gun are banned in canada only held a hunting rifle once

• 
  @MrRoadchaser21 күн бұрын

  Can a candidate wear dress blues to be commissioned in?

• 
  @bench17520 күн бұрын

  @MrRoadchaser Not sure but I don't see why not

• 
  @Custompro3661021 күн бұрын

  Could you upload a video explaining how to install and uninstall the PWS ratchet Castle nut? It's interesting and I like it!!!😊 👍🏻

• 
  @bench17520 күн бұрын

  @@Custompro36610 Let's do it

• 
  @thickwristmcfist339921 күн бұрын

  Nice video on those thicc lengthy rods... But i just wanna know.... How are you feeling?... Are you feeling brave enough... To, you know... ??? 😉

• 
  @bsnf-522 күн бұрын

  that ain't a basic scooter, this is a Maxi big scooty

• 
  @bench17522 күн бұрын

  @@bsnf-5 yes sorey

• 
  @558vulcanxh23 күн бұрын

  Nice video, I'm struggling to read the measuring bottle margins as its so vague, so I've had to revert to a medical measuring cup Fuel Fit 992381😊 The font on the label needs to be much larger, even with my glasses on, it's way too small 😮

• 
  @tacticalbt102323 күн бұрын

  34 for me

• 
  @bench17523 күн бұрын

  Me too. Other 2 are gone.

• 
  @tacticalbt102323 күн бұрын

  @@bench175 smart choice. P10 is good but little overrated I liked my PDP but not how snappy it was n higher bore axis I just run Glock now used to be Sig guy

• 
  @Gunner-ll1zd24 күн бұрын

  Which do you like better, AP5 or scorpion? Thanks.

• 
  @bench17524 күн бұрын

  AP5 is more fun with less recoil (since its roller delayed and weighs more) and it suppressed really great. Scorpion would be more functional except I lost faith that CZ fixed the soft bolt/ out of battery detonation issue.

• 
  @Gunner-ll1zd24 күн бұрын

  Good video. I've honestly been impressed by the PSA 2 stage and single stage match triggers. Hard to beat for the $$.

• 
  @bench17524 күн бұрын

  Thanks. Ya I'm impressed so far

• 
  @kareemsaleem574124 күн бұрын

  😂 yo dis guy lol

• 
  @bench17524 күн бұрын

  Thanks my guy

• 
  @thickwristmcfist339925 күн бұрын

  Rise n Shine, Buttercup!! I called out of work today, so i figured i might as well start by watching your freshly posted video. Did any of those buffer tubes give you any issues? Are they all pretty much JuSt aS gUd??... Bout to head out to Golden Corral breakfast buffet; Gotta go early to beat all them church boomers! LOL

• 
  @bench17525 күн бұрын

  No issues on any, except I haven't actually shot with the UTG Pro yet. All just as good so far but I don't think the cheap one has a lifetime warranty like the others. Enjoy GC! Have you ever seen the YT Short with the Asian guy explaining how to get your money's worth from buffet. I'll link if I find it. kzread.info/dash/bejne/dW2LrNKKeaanZ5c.htmlsi=RGxGJpfO3XD03DuL

• 
  @bench17525 күн бұрын

  kzread.info/dash/bejne/dW2LrNKKeaanZ5c.htmlsi=RGxGJpfO3XD03DuL

• 
  @bench17526 күн бұрын

  EDIT: It has carbine length gas system, my mistake.

• 
  @farklestaxbaum494526 күн бұрын

  If you used an end mill bit you could get the hole looking much nicer

• 
  @bench17526 күн бұрын

  Thanks for tip. I also just used a hand drill so it could look better

• 
  @thickwristmcfist339926 күн бұрын

  3rd hole in your buffer tube... Is that what some would consider a "bonus hole"??

• 
  @bench17526 күн бұрын

  Lol I guess so

• 
  @bench17526 күн бұрын

  I can't read fractions

• 
  @brytri390927 күн бұрын

  Hhbbn❤❤nn

• 
  @LeTruongNguyen27 күн бұрын

  Thank you so much

• 
  @bench17526 күн бұрын

  welcome

• 
  @Alex-pm6di28 күн бұрын

  Currently was having issues with some yugo milsurp mags on a brand new PSAK build. Having the issue exactly as you described it and appreciate how direct and to the point you were! Thanks man!

• 
  @bench17528 күн бұрын

  My pleasure

• 
  @JuanHernandez-pq6nb28 күн бұрын

  Good to know