Hello i like them folder that hang on the wall where do you find them and what maybe the name for them ty
@andrewellis19342 ай бұрын
I found that a high speed steel tool with more top rake didn’t chatter so much also run a bit slower.
@welshknight14562 ай бұрын
Which Perth suburb are you I'm a retired Mechanical engineering fitter /machinist, living in Baldivis, just set up my new small workshop.
@chao5s3 ай бұрын
Can the caliper bleed hole (bleeder valve screws into) thread be repaired the same way?
@RustyInventions-wz6ir4 ай бұрын
Just found your channel and Subscribed. Very nice interesting. Great channel
@natejr2434 ай бұрын
See
@ceirwan5 ай бұрын
Informative video. But that's a carrier, not a calliper, big difference.
@mechaverseengineering5 ай бұрын
Can we cut 40 teeth gear using 135 to rack gear cutter??
@sporttman63155 ай бұрын
like to see close up pictures/video of how you mounted the place the center pipe
@snicks506 ай бұрын
lol
@nitrobecane59046 ай бұрын
Bonjour je recherche cette pièces Auriez vous ça par hasard à me vendre merci
@user-fo1zc7tp6w7 ай бұрын
legend thank you
@user-dl4ig8yf3c8 ай бұрын
Bruce are you still selling these ......I have the Rong Fu RF-40 Gear Head unit ??
@jasonburns140710 ай бұрын
Thanks Bruce
@parmjitsingh553510 ай бұрын
Hello sir
@ypaulbrown11 ай бұрын
Bruce, I love that handle on the tailstock...., my 1942 South Bend 13" lost it's handle, and being an old timer [ only 10 years younger than the South Bend] I want some mechanical advantage....thanks for the great Idea...Paul...
@ypaulbrown11 ай бұрын
wonderful Bruce...Paul in the Other Sunshine State, Florida, USA
@donatolavecchia392911 ай бұрын
Hi Bruce, just what i have been looking for! Is the kit still available?
@jasonburns140711 ай бұрын
Nice machine Bruce 👍
@bobkarstien124811 ай бұрын
Thanks the great video Bruce I am picking up and Enco 30 (Rong Fu RF30) next week I would love to install the Tru-Line 8 as an upgrade. What is the price of the Tru-Line 8 and what is the turn around time to ship.......TIA Bob
@mosescarolina9733 Жыл бұрын
Ty Sir....great video with a great need out here. Ty.
@normesmonde5332 Жыл бұрын
Hi Bruce in you last video of a month ago you said see your other videos on your channel, who why what where? I can’t find them
@bobkarstien1248 Жыл бұрын
Great kit what is the price of the Tru-Line 8?
@saravanavana3583 Жыл бұрын
Who repear chaser die vdio
@doccybug Жыл бұрын
Been trying to find out where you are doing videos these days
@Buddhist8Palm Жыл бұрын
Anyway to purchase the TRU-Line-8 Kit?
@buxybuilt1519 Жыл бұрын
Hi Bruce, thanks for your video, Im fairly novice to operating a lathe, my first job is very similar to this one in your video- drilling a 1/2” npt hole out to 29mm, threading to 11.5tpi then finishing with a 1” npt tap to get some taper happening. Problem is my thread chart on my AL-410 lathe doesn’t state a 11.5” tpi thread. It has 8,9,10,11,12 etc. Do you know how I can overcome this? I could drill the hole out to the right size and hand tap it with a giant adjustable spanner.
@akfarmboy49 Жыл бұрын
Nice set up with SIP machine
@alro2434 Жыл бұрын
Thanks. Half-nuts engaged ALL the time! No thread chaser? Musta been paid by the hour watching it reverse for half the job!
@andypandy9931 Жыл бұрын
DSG lathes must be the best ever made. There was one in the toolroom when I was an apprentice and after a few years I was allowed to use it and it was a dream, beautifully made and so smooth and accurate.
@David-pm8th Жыл бұрын
Nice
@Kevin-bn3ww Жыл бұрын
Any more projects on the Kearns that you can upload. Great seeing it in action!
@Max_Marz Жыл бұрын
Bruce how are you doing mate. its been a minute...
@bahadersingh8880 Жыл бұрын
Good job 👍
@niallenglish3777 Жыл бұрын
Hiya Bruce. I've got the same job to go at on my renault master van, however, I'me wondering where to find the full insert kit like you've got there. So far haven't been able to find them. Have the helicoil, but what also worried me about that setup was after you snap the lug off the bottom of it, it's got nowhere to go but down, and this'll do the engine no good I imagine. Possibly it'd come out if you do an oil change afterwards before starting engine, or if you try to magnetize the lug breaker tool. this might also drag it out, tho I wouldn't bet on either being a success. But maybe you'd have a link or what's the brand of the full insert kit you were using please?
@joaquin698 Жыл бұрын
Tks for sharing.... interested in the press ... Shipping to Florida USA ... PLS send me your contact info... phone number and email... Tks again 👌🏻🙏🏻
@markneedham8726 Жыл бұрын
Love to see the man who could cut a 2" NPT thread with a tap, alone into a parallel hole.
@georgespangler1517 Жыл бұрын
That's impressive,, heard of it but never knew what Spade drilling was an you explain it well
@mantvydasgarbaravcius2117 Жыл бұрын
What is the name off this kit???
@meocats2 жыл бұрын
Where you been Bruce? Rest in peace ... "I'm not glad he's dead but I'm glad he's gone " -- Abom79
@y788lhjk12 жыл бұрын
You should not drill into the table since the internal stress in the casting will be released and it could warp your table make it not flat and maybe even cause it to bind
@adamdebicki92372 жыл бұрын
Gday. Where did you buy that press?
@anastigmatix41192 жыл бұрын
Yeah, but how do you cut inner splines like inside a clutch plate hub?
@teguhjayatehnik59692 жыл бұрын
Sucses
@kazihabib88242 жыл бұрын
Hello friends i am Mr Habib Thank you for Good presented
@matthewcornelius58622 жыл бұрын
I don't have that dead center for my rotary. What I do is coax indicate the rotary and set that at X0.0 Y0.0 on the readout. I then put a long 5/8 dia dowel pin in the spindle, lower the quill into the center of the chuck, then tighten the jaws on to the dowel pin. Perfectly on center every time.
@ramsinghmatharoo90662 жыл бұрын
I am interested
@DudleyToolwright2 жыл бұрын
That was really informative. Thanks, Bruce.
@notbrucewhitham80702 жыл бұрын
Dudley thanks sir! Hopefully I'll be back up and running again with more videos into the future.
@OmeMachining2 жыл бұрын
Love your little HBM. Super envy. Been looking for one for ages but they are impossible to get here in Denmark 😊
Пікірлер
Hello i like them folder that hang on the wall where do you find them and what maybe the name for them ty
I found that a high speed steel tool with more top rake didn’t chatter so much also run a bit slower.
Which Perth suburb are you I'm a retired Mechanical engineering fitter /machinist, living in Baldivis, just set up my new small workshop.
Can the caliper bleed hole (bleeder valve screws into) thread be repaired the same way?
Just found your channel and Subscribed. Very nice interesting. Great channel
See
Informative video. But that's a carrier, not a calliper, big difference.
Can we cut 40 teeth gear using 135 to rack gear cutter??
like to see close up pictures/video of how you mounted the place the center pipe
lol
Bonjour je recherche cette pièces Auriez vous ça par hasard à me vendre merci
legend thank you
Bruce are you still selling these ......I have the Rong Fu RF-40 Gear Head unit ??
Thanks Bruce
Hello sir
Bruce, I love that handle on the tailstock...., my 1942 South Bend 13" lost it's handle, and being an old timer [ only 10 years younger than the South Bend] I want some mechanical advantage....thanks for the great Idea...Paul...
wonderful Bruce...Paul in the Other Sunshine State, Florida, USA
Hi Bruce, just what i have been looking for! Is the kit still available?
Nice machine Bruce 👍
Thanks the great video Bruce I am picking up and Enco 30 (Rong Fu RF30) next week I would love to install the Tru-Line 8 as an upgrade. What is the price of the Tru-Line 8 and what is the turn around time to ship.......TIA Bob
Ty Sir....great video with a great need out here. Ty.
Hi Bruce in you last video of a month ago you said see your other videos on your channel, who why what where? I can’t find them
Great kit what is the price of the Tru-Line 8?
Who repear chaser die vdio
Been trying to find out where you are doing videos these days
Anyway to purchase the TRU-Line-8 Kit?
Hi Bruce, thanks for your video, Im fairly novice to operating a lathe, my first job is very similar to this one in your video- drilling a 1/2” npt hole out to 29mm, threading to 11.5tpi then finishing with a 1” npt tap to get some taper happening. Problem is my thread chart on my AL-410 lathe doesn’t state a 11.5” tpi thread. It has 8,9,10,11,12 etc. Do you know how I can overcome this? I could drill the hole out to the right size and hand tap it with a giant adjustable spanner.
Nice set up with SIP machine
Thanks. Half-nuts engaged ALL the time! No thread chaser? Musta been paid by the hour watching it reverse for half the job!
DSG lathes must be the best ever made. There was one in the toolroom when I was an apprentice and after a few years I was allowed to use it and it was a dream, beautifully made and so smooth and accurate.
Nice
Any more projects on the Kearns that you can upload. Great seeing it in action!
Bruce how are you doing mate. its been a minute...
Good job 👍
Hiya Bruce. I've got the same job to go at on my renault master van, however, I'me wondering where to find the full insert kit like you've got there. So far haven't been able to find them. Have the helicoil, but what also worried me about that setup was after you snap the lug off the bottom of it, it's got nowhere to go but down, and this'll do the engine no good I imagine. Possibly it'd come out if you do an oil change afterwards before starting engine, or if you try to magnetize the lug breaker tool. this might also drag it out, tho I wouldn't bet on either being a success. But maybe you'd have a link or what's the brand of the full insert kit you were using please?
Tks for sharing.... interested in the press ... Shipping to Florida USA ... PLS send me your contact info... phone number and email... Tks again 👌🏻🙏🏻
Love to see the man who could cut a 2" NPT thread with a tap, alone into a parallel hole.
That's impressive,, heard of it but never knew what Spade drilling was an you explain it well
What is the name off this kit???
Where you been Bruce? Rest in peace ... "I'm not glad he's dead but I'm glad he's gone " -- Abom79
You should not drill into the table since the internal stress in the casting will be released and it could warp your table make it not flat and maybe even cause it to bind
Gday. Where did you buy that press?
Yeah, but how do you cut inner splines like inside a clutch plate hub?
Sucses
Hello friends i am Mr Habib Thank you for Good presented
I don't have that dead center for my rotary. What I do is coax indicate the rotary and set that at X0.0 Y0.0 on the readout. I then put a long 5/8 dia dowel pin in the spindle, lower the quill into the center of the chuck, then tighten the jaws on to the dowel pin. Perfectly on center every time.
I am interested
That was really informative. Thanks, Bruce.
Dudley thanks sir! Hopefully I'll be back up and running again with more videos into the future.
Love your little HBM. Super envy. Been looking for one for ages but they are impossible to get here in Denmark 😊
Yes they are gems, and scarce.
Great work!