Пікірлер

• 
  @AlikaAlitheiA20 күн бұрын

  2:48 do you. think the original "Evolution Door" can use the same Hinge or it needs to be something different due to the design?

• 
  @carsokk2 ай бұрын

  Great video. I am about to attempt to refurb a La Pavoni Professional in very similar condition. Did you do anything to clean up the chrome (that you didn't paint) besides soak in citric acid. Is there anything else that can be done to clean, perserve, or protect the chrome? I'd appreciate anyone's ideas. Also, does anyone know were to get a full gasket kit that includes grease?

• 
  @paulp39922 ай бұрын

  Great colors! You should have built a door that could close entirely. Ulike panels, it's always 1/2 open :( . Double that door size and this thing is sic.

• 
  @JoshHamrick-ll1zq3 ай бұрын

  Awesome build! Do you have plans for sale for this build?

• 
  @yuvakishorevankayala3 ай бұрын

  Extraordinary Woodwork....

• 
  @vallo19874 ай бұрын

  beautiful 😊 one question for a noob, how do you polish all the chrome parts withouth scratching them?

• 
  @waynerogers54854 ай бұрын

  Thanks for taking care of this wonderful machine. Beautiful. Great video, too.

• 
  @GeekHotfix4 ай бұрын

  P E R F E C T I O N ... Indeed desesrves the name of Masterpiece!!!

• 
  @Yarmles6 ай бұрын

  Wow great work man

• 
  @telmenaltansukh50926 ай бұрын

  Hast du ein Seil genommen oder ein Gummiband?

• 
  @user-zu4py4ze3d6 ай бұрын

  I love this❤❤❤ Apologize, but do you have actually the plans for this because I am in a joiner collage and yi would like to make your cabinet as my exam work with all my respect. I would us it. Please think of me as a student. Regards Sandor

• 
  @ufo98166 ай бұрын

  Good video , but I have to say the Machine in the video is not very old in La Pavoni , it is kind of new model

• 
  @BklynJames7 ай бұрын

  How long do you leave it in the citric acid?

• 
  @pimpim19797 ай бұрын

  where we can buy it

• 
  @MrCrafty057 ай бұрын

  Wow.. Amazing ❤❤❤

• 
  @dws13378 ай бұрын

  Nice furniture ... I like the hidden cabinets and the sliding mechanism. Hopefully it will work over long time.

• 
  @flexdahill3 ай бұрын

  Thanks, since 2019 without any change until now. I hope so too. :)

• 
  @melodypaz724710 ай бұрын

  Wow! What a lot of skills demonstrated in one project! I like the rotating corners on the fascia of your cabinet drawers and on the kinetic doors. I like that you chose a hefty dowel piece for the handle/ pivot. There is much to like in this project!

• 
  @flexdahill9 ай бұрын

  Thanks :)

• 
  @melodypaz724710 ай бұрын

  That looks like fun!

• 
  @dionisiseulogitos385911 ай бұрын

  Truly awesome door.. I was wondering what will happen if you put the middle piece not like rhombus but regular like a square thank for the video and for you time

• 
  @thecoffee2820 Жыл бұрын

  Service Mesin Kopi nya Sangat Manfaat Sekali 👍 11:24

• 
  @karimb.b.8571 Жыл бұрын

  It is an exceptional video. Congratulations.

• 
  @karimb.b.8571 Жыл бұрын

  Hello!!! How long should it be submerged in citric acid?

• 
  @flexdahill Жыл бұрын

  Hi, until it is clean :) depends, may take a few hours or a day. It helps as well to heat the acid a bit, just not boiling.

• 
  @karimb.b.8571 Жыл бұрын

  Thank you very much for answering. Your video is helping me a lot to restore my La Pavoni.

• 
  @karimb.b.8571 Жыл бұрын

  Finally, does the acid affect the outside? Isn't it harmful?

• 
  @Conservator. Жыл бұрын

  Very nicely restorated and also beautifully filmed. 👌

• 
  @marcelf.284 Жыл бұрын

  Any tips on removing the tank? It moved a few millimeters and seems to be stuck now. Rotating counterclockwise...

• 
  @flexdahill Жыл бұрын

  Should be easy to remove. At least in my case. Everything removed there is just the tank in a plastic thread.🤞

• 
  @marcelf.284 Жыл бұрын

  @@flexdahill I managed to remove it - the machine is from 1995 and probably has not been serviced before, so it took me a bit longer including the use of tools...

• 
  @MrAllenClemo Жыл бұрын

  Best video I've ever seen re La Pavoni. I get a lot of steam leakage from the "oval" group head (held on to the boiler by 2x 14mm nolts). I had assumed there was a gasket in there as I am unable to tighten the 2x 14mm bolts any more yet still get vast amounts of steam and spluttering water from this joint. Any suggestions? Do I just put a liberal coating of silicone food-grade grease on the two faces here for example? Also I need to replace the gasket the boiler sits on - can I just unscrew the boiler or do I HAVE to tinkle with the electrics and remove the heating coil the way you did?

• 
  @flexdahill Жыл бұрын

  Thanks :) With a new gasket it should be sealed, but yes the original one is quite thin, so maybe you can get a thicker one somewhere. (Food- and heat-compatible) And just make a foto of alle the cabels before you take it appart so you can reassamble everything, cause I think that makes the job easier as well as the cleaning.

• 
  @imareare1949 Жыл бұрын

  My attention was centered in the section wise making process. Drawings are helpful. The final outcome speaks for itself. So well done....hours and hours of hard skilful work for each part and portion of work..... Regards and love from India. Will i dare to attempt this? RR

• 
  @flexdahill Жыл бұрын

  Thanks, just give it a shot, that was my first try, so learn from my faults and replace the piano hinges. 😉✌️

• 
  @ambysto1541 Жыл бұрын

  Super 🤩🤩

• 
  @ITAMrPink Жыл бұрын

  Excellent! I just miss one thing: is there a way to remove the water level indicator glass mounts? The ones above and below it. There are some nuts inside the boiler I can't access.

• 
  @flexdahill Жыл бұрын

  Sorry can´t help you with that, I haven´t tried. :)

• 
  @smietniknautube Жыл бұрын

  Superb, but white top panel would probably look better

• 
  @flexdahill Жыл бұрын

  Thanks, true I just did that couse of the things I had left over. Beforehand it was my plan to use a light-coloured wood. Next time :D

• 
  @gessicapanucci5020 Жыл бұрын

  Grazie mille!!!

• 
  @cbpaton53 Жыл бұрын

  ... beautifully done, thanks :)

• 
  @coffeesensor6612 Жыл бұрын

  One of the nicest restoration process I have ever seen. Let me know if you need any help upgrading it, I would love to colaborate with someone like you. Cheers and God bless, Tudor P.

• 
  @mike1hundred1 Жыл бұрын

  Great video! I read that citric acid can be bad for the chrome finish, is this true? I have already taken my La Pavoni apart and don't want to damage anything.

• 
  @flexdahill Жыл бұрын

  I wouldn't know that there is any effect on chrom, but better check again. :)

• 
  @dpete8995 Жыл бұрын

  Just ordered a gasket kit new power switch and limit switch for my pre-millennium PC-16… appreciate the demo!

• 
  @alessandraformica8091 Жыл бұрын

  Hi, thanks a ton for this. Did you use the old o-rings? Or you purchased new ones? If so, from where?

• 
  @flexdahill Жыл бұрын

  Hi, I bought new o-rings from pavoni-hamburg.de :)

• 
  @Cor_Netto Жыл бұрын

  Wonderful job!

• 
  @kickemassicus Жыл бұрын

  Great job man

• 
  @flexdahill Жыл бұрын

  thanks :)

• 
  @nakinnovations8800 Жыл бұрын

  Why you have used rope behind the doors?

• 
  @flexdahill Жыл бұрын

  Gravity :)

• 
  @samreennadeem963 Жыл бұрын

  I really admire your work, it really a masterpiece can you make' impossible revolving cabinet'?

• 
  @flexdahill Жыл бұрын

  I will have a look :)

• 
  @dmunari1983 Жыл бұрын

  Hi, nice video, how I can polish the entire machine? thanks

• 
  @flexdahill Жыл бұрын

  you can just do it by hand with a polishing cloth. :)

• 
  @KnightMD Жыл бұрын

  Your girlfriend bought you cancer. Sheesha delivers way more nicotine than cigarettes btw, even though it's "cleaner and filtered". When we had a relative hooked on sheesha visiting, they couldn't wait to leave before getting back to it. I'd keep it as a decorative piece, but wouldn't actually use it. Edit: FREAKIN INCREDIBLE DOOR, OF COURSE. Best one I've seen with this idea.

• 
  @MOHAMED_DZ_1 Жыл бұрын

  Wow genius 👍👍👍

• 
  @nicholasmorineau3638 Жыл бұрын

  gorgeous piece, smart buid and beautiful result, well done

• 
  @flexdahill Жыл бұрын

  thanks 🤗

• 
  @okingoprek7989 Жыл бұрын

  Luar biasa 👏

• 
  @viniciusbrito7512 Жыл бұрын

  Beautiful work!

• 
  @jordiorte458 Жыл бұрын

  Excelent💪 Podrías subir los planos en los comentarios? Crack

• 
  @flexdahill Жыл бұрын

  thanks

• 
  @aguynamednak71502 жыл бұрын

  Such types of doors are very sensitive and does not close properly,many people have made such type of kinetic doors but your one is looking much better

• 
  @flexdahill2 жыл бұрын

  thanks, took some time and adjustment's, but in the end, it's nearly sliding on his own. 😊

• 
  @nakinnovations88002 жыл бұрын

  Nice and innovative

• 
  @leotom7542 жыл бұрын

  Great job 👏 just got myself the same project

• 
  @ccg60312 жыл бұрын

  I love the doors, I'm trying to build them. You have given me new ideas on how to attach them. Beautiful! Unique! Master indeed!

• 
  @flexdahill2 жыл бұрын

  thanks and have fun building them. :)