Ciao la mia a cominciato oggi a strappare e nel mollare lacceleratore scoppietta cosa potrebbe essere ? Forse candele o filtro benzina 😅?
@DJPresser11 күн бұрын
What value is your idle set at? it should be about 1200 revs
@garyporter-smith965816 күн бұрын
Nice one John , New Reg Rec looks great quality
@user-hh9cu2px9gАй бұрын
It’s a lot cleaner than the turd infested barn I have to work on my bikes in. And the critters (woodchucks and squirrels) will chew on the rubber stuff. Ugh. But like another commenter said, it’s better than working outside…
@gerard3665Ай бұрын
Thanks for the video. You are a good mechanic. You don't clean the carburettors with ultrasounds and you don't do the synchronization with a special tool ? It is not necessary !
@DJPresserАй бұрын
If you have an ultrasonic cleaner then yes do it! For balancing the carbs I just listen and ride until I’m happy.
@elioresmini6339Ай бұрын
Hello, I have a consomation of 10l/100 with my f650 75km. Is it a carb problem for sur ? Thank you
@DJPresserАй бұрын
Check to see if your carb is overflowing when you leave the fuel tap on. If yes then the floats are not working as they should.
@stevebrame87662 ай бұрын
I love watching this, I think I'm has smooth as the guy in grey trousers white top, but most likely like the guy with beard who looks lost. I think I'm responsible for most of the view count, been watching for over a year and tonight alone have watched 5x's
@DJPresserАй бұрын
The guy who looks "lost" was unfortunately suffering from mental health issues caused by a dementia type illness. He was a lovely guy and actually left me some of his records.
@DJPresserАй бұрын
Oh and the guy in the white shirt and grey trousers is me so thank you for your comments.
@PeterSmith-or3pq4 ай бұрын
I've done this on my 98 f650 st . Little tricky ❤
@richardwhitehead46847 ай бұрын
Not having a garage, I also have to work in an old barn. Not ideal, but better than working outside. Fwiw, I just purchased a non running 1997 f650 and will pulling the carbs soon.
@RobertJacobson-zx7xs7 ай бұрын
Relocate the VR next to the air intake . Problem solved.
@pierre_beyaerteco_drone94067 ай бұрын
Same problèm, thanks you i buy this
@user-qi5mh3pq1p11 ай бұрын
LOVE WATCHING THE DANCE 💃 MOVES BEING DISABLED I CAN ONLY DREAM 😊
@pawekaminski7607 Жыл бұрын
Thanks for the movie. Wondered what is correct position of this short cable with a spring that opposes the throtle cable at the left side of carburetor. I have turned it one way and the other and don't know how it should sit now.
@Creative-content24-7 Жыл бұрын
How many turns out is it on the air mixture screws pal thanks
@DJPresser Жыл бұрын
I did 3 turns out. You can get to it once it's fitted back in if you hold your tongue in the right place!
@Creative-content24-7 Жыл бұрын
@@DJPresser I did 3 and half and just left it mate surly will be ok
@OrlandoHarrison Жыл бұрын
You said no lights running this time. Before you changed it, did it run with lights on but cut out when the lights off? That's what's happening on mine.
@DJPresser Жыл бұрын
Yes, if you have a faulty voltage regulator it puts too much voltage into the system. By turning the lights on it lowers the voltage and the bike runs ok. As soon as you turn off the lights it will not run properly. There is another video of mine showing this.
@richardellison2694 Жыл бұрын
Who is Michelle
@motoarchery Жыл бұрын
Wooowww. I got lost in that carburetor with ya, mate. Motorcycle bliss. My 99 f650 is still going strong, but she's lately been chugging a bit at lower rpms. I know its time to get down to that carb. Thanks for the excellent video.
@jameslynch7826 Жыл бұрын
Surely not The French won’t have a clue?!?!
@DJPresserАй бұрын
Most of us are Brits 😄
@hdbkfl Жыл бұрын
Sir. You are the man! I have always been intimated by even touching a calburator, but you made it look easy. Thank you for making my quality of life better! Thank you, thank you..
@bezpopisu Жыл бұрын
Finally I found out, which float mount in which carb - I spoke about the jet in the plastic float funnel. Thank you!
@TINGVELL Жыл бұрын
did you try it out how was it
@DJPresser Жыл бұрын
Worked a treat thanks
@richardellison2694 Жыл бұрын
Does anyone have the name of this record and the artist Thanks Ric Ellison
@DJPresser Жыл бұрын
Angie Stone - Wish I Didn't Miss You
@richardellison2694 Жыл бұрын
What's the name of this song and artist Thanks
@raymondfleet70111 ай бұрын
It’s Angie Stone -Wish I Didn’t Miss You
@richardellison2694 Жыл бұрын
Has any one got the uncut version Thanks Ricardo
@richardellison2694 Жыл бұрын
Nice dancing Michelle
@howrrmr.7172 Жыл бұрын
Happy 2023 with your 650!!
@keithbarker7642 Жыл бұрын
Want to dance like this lady very smooth
@keithbarker7642 Жыл бұрын
Makes dancing looks so easy x
@keithbarker7642 Жыл бұрын
O M G she can float x
@margaret7295 Жыл бұрын
Northern people have soul ❤️
@raymondfleet70111 ай бұрын
Got to agree with you there
@rangie944 Жыл бұрын
Thanks for posting, good information there thanks. Did you change the venturi in the carbs?
@DJPresser Жыл бұрын
No, didn't need to so left it alone 🙂
@traceystead6574 Жыл бұрын
Top tune
@imonthebox11482 жыл бұрын
Where is this disco ?
@foodcompare15232 жыл бұрын
Hi, we don't class it as a disco. It's a Northern Soul Venue in Central Brittany, France.
@whatmouth2 жыл бұрын
Can't all be talc knobheads with the sense of I'm better than you
Пікірлер
Ciao la mia a cominciato oggi a strappare e nel mollare lacceleratore scoppietta cosa potrebbe essere ? Forse candele o filtro benzina 😅?
What value is your idle set at? it should be about 1200 revs
Nice one John , New Reg Rec looks great quality
It’s a lot cleaner than the turd infested barn I have to work on my bikes in. And the critters (woodchucks and squirrels) will chew on the rubber stuff. Ugh. But like another commenter said, it’s better than working outside…
Thanks for the video. You are a good mechanic. You don't clean the carburettors with ultrasounds and you don't do the synchronization with a special tool ? It is not necessary !
If you have an ultrasonic cleaner then yes do it! For balancing the carbs I just listen and ride until I’m happy.
Hello, I have a consomation of 10l/100 with my f650 75km. Is it a carb problem for sur ? Thank you
Check to see if your carb is overflowing when you leave the fuel tap on. If yes then the floats are not working as they should.
I love watching this, I think I'm has smooth as the guy in grey trousers white top, but most likely like the guy with beard who looks lost. I think I'm responsible for most of the view count, been watching for over a year and tonight alone have watched 5x's
The guy who looks "lost" was unfortunately suffering from mental health issues caused by a dementia type illness. He was a lovely guy and actually left me some of his records.
Oh and the guy in the white shirt and grey trousers is me so thank you for your comments.
I've done this on my 98 f650 st . Little tricky ❤
Not having a garage, I also have to work in an old barn. Not ideal, but better than working outside. Fwiw, I just purchased a non running 1997 f650 and will pulling the carbs soon.
Relocate the VR next to the air intake . Problem solved.
Same problèm, thanks you i buy this
LOVE WATCHING THE DANCE 💃 MOVES BEING DISABLED I CAN ONLY DREAM 😊
Thanks for the movie. Wondered what is correct position of this short cable with a spring that opposes the throtle cable at the left side of carburetor. I have turned it one way and the other and don't know how it should sit now.
How many turns out is it on the air mixture screws pal thanks
I did 3 turns out. You can get to it once it's fitted back in if you hold your tongue in the right place!
@@DJPresser I did 3 and half and just left it mate surly will be ok
You said no lights running this time. Before you changed it, did it run with lights on but cut out when the lights off? That's what's happening on mine.
Yes, if you have a faulty voltage regulator it puts too much voltage into the system. By turning the lights on it lowers the voltage and the bike runs ok. As soon as you turn off the lights it will not run properly. There is another video of mine showing this.
Who is Michelle
Wooowww. I got lost in that carburetor with ya, mate. Motorcycle bliss. My 99 f650 is still going strong, but she's lately been chugging a bit at lower rpms. I know its time to get down to that carb. Thanks for the excellent video.
Surely not The French won’t have a clue?!?!
Most of us are Brits 😄
Sir. You are the man! I have always been intimated by even touching a calburator, but you made it look easy. Thank you for making my quality of life better! Thank you, thank you..
Finally I found out, which float mount in which carb - I spoke about the jet in the plastic float funnel. Thank you!
did you try it out how was it
Worked a treat thanks
Does anyone have the name of this record and the artist Thanks Ric Ellison
Angie Stone - Wish I Didn't Miss You
What's the name of this song and artist Thanks
It’s Angie Stone -Wish I Didn’t Miss You
Has any one got the uncut version Thanks Ricardo
Nice dancing Michelle
Happy 2023 with your 650!!
Want to dance like this lady very smooth
Makes dancing looks so easy x
O M G she can float x
Northern people have soul ❤️
Got to agree with you there
Thanks for posting, good information there thanks. Did you change the venturi in the carbs?
No, didn't need to so left it alone 🙂
Top tune
Where is this disco ?
Hi, we don't class it as a disco. It's a Northern Soul Venue in Central Brittany, France.
Can't all be talc knobheads with the sense of I'm better than you
Effortless silky smooth dancing