Пікірлер

• 
  @lordhelmet22013 ай бұрын

  Hey can you give me a list of the materials you used to make this?

• 
  @sunilkarki57383 ай бұрын

  adding a diffuser just like in the led mobile display should help a lot :)

• 
  @markmorrow54114 ай бұрын

  Thanks for the video because I was just having the same problem with mine. Now I will go and repeat the process you just showed and hope it works. God Bless!

• 
  @JohnSmith-gm4fj4 ай бұрын

  I hope it works for you!

• 
  @markmorrow54114 ай бұрын

  Well I tried it but it didn’t work. What were the websites that I could buy a new pump from cheap?

• 
  @JohnSmith-gm4fj4 ай бұрын

  @@markmorrow5411 amazon www.amazon.com/Priming-Agricultural-Spraying-Treatment-0-7GPM/dp/B0B6RKXSMG/ref=sr_1_8?keywords=12v+1.8a+Pump%2C

• 
  @robertnovelli29604 ай бұрын

  I've ot the same one and it just started that today you ever find out what it was? But I still haven't got mine to start after you did this

• 
  @JohnSmith-gm4fj4 ай бұрын

  I ended up tearing the entire machine apart. First I replaced the motor and the belt and the rollers.... that did not fix the issue. I then replaced the PC board.. that fixed the issue... Live and learn.

• 
  @robertnovelli29604 ай бұрын

  @@JohnSmith-gm4fj Thanks so much

• 
  @darth_dan88866 ай бұрын

  I've previously tried printing measuring reticles on film... Honestly, really difficult to get them thin enough on an inkjet printer. I wonder of there's a more effective method of getting really crisp tiny crosshairs made so you don't get this odd light effect where one part of it is brighter than the other. P.S. I've been hunting for a Revi C12/D replica for years. This might just bring me close enough to making one myself.

• 
  @JohnSmith-gm4fj6 ай бұрын

  you are not printing the tiny crosshairs, you are printing the black space around them. The crosshairs are the clear part.

• 
  @darth_dan88866 ай бұрын

  @@JohnSmith-gm4fj Of course. But the printer tolerances behave in a similar way.

• 
  @JohnSmith-gm4fj6 ай бұрын

  @@darth_dan8886 I am using a old crappy hp inkjet I got for under 100 at Walmart 10 years ago.

• 
  @darth_dan88866 ай бұрын

  @@JohnSmith-gm4fj Which is absolutely usable for this project, don't get me wrong! I'm just saying that as you try making smaller masks and putting them closer to the lamp for a more evenly lit image,, the inkjet might run into limitations, that's all.

• 
  @AMD70276 ай бұрын

  Skip to 9:20 if you actually want to see it work without having to listen to him droning on....next time GET TO THE POINT....making people watch to the last minute is not going to get people to come back to your other videos.

• 
  @conniepenza37587 ай бұрын

  W HAT IS THE PART NUMBER?

• 
  @lewis666lewis7 ай бұрын

  Could you do this with a phone screen instead of a led and have a more modern hud?

• 
  @fifi23o57 ай бұрын

  Both Me and Bf are correct. The plane started as Bf-109, produced by Bayerische Flugzeugwerke, hence, Bf. The designer, Willi Messerschmitt took over the company in 1938 and it was renamed into Messerschmitt AG. So it is actually more accurate to call it Me-109.

• 
  @patrickrameau8 ай бұрын

  Nice info, just one thing: what about focusing at infinity? How do you choose/adjust the simple magnifying glass to act as a collimating lens? No pilot wants his eyes to alternate focusing between the glass and the target.

• 
  @ARandomHumanBein7 ай бұрын

  To do that you just need to find the focal length of the lens and put the LED at that distance

• 
  @johnbeauvais315910 күн бұрын

  @@ARandomHumanBein LED or reticle? I think the reticle is the only part that has to be at the focal length.

• 
  @ARandomHumanBein10 күн бұрын

  @@johnbeauvais3159 Yes, the reticle should actually be at the focal length

• 
  @user-rf6tc8js1h8 ай бұрын

  Painful. Might as well just said replace the magnetron, end.

• 
  @mischi92039 ай бұрын

  was really looking for a video like that, thank you very much! Do you think you could actuslly use like a small lcd screen instead? So it could actuslly shoe like on a modern hud

• 
  @JohnSmith-gm4fj9 ай бұрын

  Yes you could and that would be awesome!!

• 
  @paulc5159 ай бұрын

  Hi John, I’m facing the same project for possibly the 4th time. I’ve replaced fuses mostly but now I’m facing what just may be the magnetron. I’m thinking of replacing other components like the two door switches while the unit is sitting on my dining room table. Where did you buy the Magnetron? Btw, great video!!!!

• 
  @JohnSmith-gm4fj9 ай бұрын

  I got the magnetron off Amaazon! I think it was around 75 bucks.

• 
  @schmerzdj57199 ай бұрын

  I'm making one of these for an RC me262 to use in fpv headtracking.... I'm doing it with a tiny OLED standing verticle at the back, a 90° reflective prism underneath the collimating lense and a little peice of glass that's designed to reflect like 30%(wut I'm prob gonna try first) The reason Ur getting ghosting is cause it's traveling thro the glass before it hits the reflective surface and the glass is bending the light and giving U a double image.... You need the reflective surface to be the side of the glass that the reticle is hitting first so the glass can't bend the it. Trying to work out how to motorised the sun reflector while looking as stock as possible so I can actuate it via remote while flying....

• 
  @stevenwilkes573710 ай бұрын

  John, Well done. I did 2 of these with optics and recital provided by Tim Noack. Used actual beam splitter glass which worked very well except for not being full scale thickness, 2mm vs. 6mm. I also drilled out the printed ball locks and installed working ones so the sun shield worked and locked in the up and down position. I will have to look into the clear plastic you suggest as the glass lenses I used were pretty expensive. I tried a 6mm piece of lexan and the ghosting was nasty.

• 
  @roryoneil802710 ай бұрын

  That was painful to watch

• 
  @reza167411 ай бұрын

  Hello John, Where did you get the microtone? I have a similar microwave oven combo built-in wall, and the microwave is not heating. The problem is I cannot find the Microtrone of my model, JTP86SOH4SS.

• 
  @JohnSmith-gm4fj11 ай бұрын

  I got the magnetron off amazon

• 
  @reza167411 ай бұрын

  @@JohnSmith-gm4fj Thanks John for the reply. Appreciate it.

• 
  @Parricle Жыл бұрын

  Is the printed reticle sheet an OHP sheet? Also, was it printed on a home printer?

• 
  @JohnSmith-gm4fj Жыл бұрын

  This was printed on clear plastic ohp sheet on my crappy home printer.

• 
  @motionsic Жыл бұрын

  Thanks for the informative video on reflector sights and research behind it! The concept is easy to understand. But to scale it down to usable size for RC planes yet retain clear reticle image, no ghosting and no parallax involve a lot of intricacies. Simple but the devil is in the details. Example of working reflex sight on RC plane: kzread.info/dash/bejne/pKuWr6p_lLXXgNI.html

• 
  @iceman7707 Жыл бұрын

  This is very cool! I wonder if you could make a modern jet HUD like an F18/F16 but with a green led and a different templet.

• 
  @JohnSmith-gm4fj Жыл бұрын

  Yes actually you can. In fact you can do better. If you go to thingiverse and pull up this file the author set it up so he could project up his GPS and use it like a HUD while driving.

• 
  @frontrangetours Жыл бұрын

  Why does the moisture keep getting into my User interface board? I already replaced it once because the moisture ruined the controls and it's full of moisture again in less than 6 months? why is it not keeping dry inside the control panel? Thank you for your videos!

• 
  @JohnSmith-gm4fj Жыл бұрын

  Hi Lisa, without seeing your unit it's hard to tell. My first guess is that there is an issue with your seal. The seal that goes around the dishwasher door has a tiny gap and your getting steam coming up and condensing on the control panel. They sell that seal, you can buy it and replace the old one.

• 
  @codaxthevulture4129 Жыл бұрын

  Are you planning to attach it to rifle or air soft? I wonder how good of a rifle sight it would be

• 
  @JohnSmith-gm4fj Жыл бұрын

  no, this would be more for a WWII airplane simulator or maybe even a cockpit sim, if you were to build up the entire cockpit.

• 
  @mrwindsor7834 Жыл бұрын

  In fairness i believe BF was the companies before being called Messerschmitt like before the war but there are many contemporary accounts of it being referred to as the me 109 so wouldnt worry its no where near as bad calling leichter panzerjager 38(t), an "hetzer" 😉😂

• 
  @JohnSmith-gm4fj Жыл бұрын

  Yes fair point. The "BF" in BF 109 stands for Bayerische Flugzeugwerke, which translates to "Bavarian Aircraft Works" in English. The BF 109 was a fighter aircraft developed in Germany during the 1930s and used extensively by the Luftwaffe (German Air Force) during World War II. The Bayerische Flugzeugwerke company was later renamed Messerschmitt AG, and the BF 109 became more commonly known as the Messerschmitt Bf 109.

• 
  @zackhawn5944 Жыл бұрын

  Commenting for when this goes viral in 10 years

• 
  @KR-rs3sj Жыл бұрын

  Hopefully this video gets blessed by the algorithm, very interesting

• 
  @AltronT Жыл бұрын

  You could try putting this on a BB gun.

• 
  @jeronimomurruni Жыл бұрын

  Is it somewhat hollographic? i mean, does the center of the center of the cross hair stays more or less "on target" if you move side to side or up and down while watching down the glass? or is just a reflection with no functional purpose?

• 
  @JohnSmith-gm4fj Жыл бұрын

  The reticle doesn't move, it stays right where it's projected. You can move your head around until you see it but it doesn't move with you. The functional purpose is to put it on the enemy aircraft in front of you and pull the trigger. My understanding is that only the Allies had a gryo-compensated sight that moved around but I think that was much later in the war.

• 
  @poopinmetrousers18988 ай бұрын

  @@JohnSmith-gm4fjyou should replace the lens with an actual collimator lens it will make it “holographic” like its supposed to be. Just measure the dimensions and there must be something similar online

• 
  @Bren398 ай бұрын

  ​@@JohnSmith-gm4fjif the reticle doesn't move.. Then I assume you've got to move your head to put your eyes, reticle and plane in the same line. How is this better than just an iron static reticle? I thought the plane was projected through a lens also along the reticle. This way the pilots head position didn't matter.. You day both the plane and reticle projected on same plane.. You just line them up and shoot .

• 
  @DoNotPushHere8 ай бұрын

  @@Bren39 it is way easier. It behaves/resembles a laser pointer. You don't have to align your head completely (first advantage) and of course you dont have to align front and rear sights (second adv.) You just look through a window and find a spot that moves with the airplane (of course you have to fly the airplane to make it point at the target). Once you see it, you can move your head around quite a lot. The closer to the window, the wider field of view you will see the virtual reticle against the real world. Now it's a matter of matching the ghost reticle and the target. And it feels like a laser. I know red dots quite a lot and yet I still love to play with them. The unnatural feeling of seeing a dot floating at infinity no matter how you rock your head is always quite interesting to me

• 
  @rooster4587 Жыл бұрын

  honestly this is a really cool video keep it up

• 
  @theoriginalpauly Жыл бұрын

  For the reflector, you can use either glass or plastic and add automotive window tint film to make a first-side reflector.

• 
  @JohnSmith-gm4fj Жыл бұрын

  Cool idea, I'll have to try that! Thanks!

• 
  @chrisblack6258 Жыл бұрын

  Now it's for DICE and Activision to add it to MP44.

• 
  @spingebill8551 Жыл бұрын

  Mount it on a rifle

• 
  @Ronnie_McDoggle Жыл бұрын

  awesome piece of history, thanks for sharing

• 
  @jansvoboda4293 Жыл бұрын

  I would add one translucent sheet in between led and reticle to diffuse the light and reduce the brightness hot spot.

• 
  @JohnSmith-gm4fj Жыл бұрын

  Oh yeah, some velum might work for that. Thanks!

• 
  @Tiagomottadmello Жыл бұрын

  Very clever ! 👍🏻👍🏻👍🏻👍🏻👍🏻

• 
  @tomcleave2622 Жыл бұрын

  Very cool, thank you. looking forward to see more!

• 
  @Allan_aka_RocKITEman Жыл бұрын

  *_Interesting._*

• 
  @marciomaiajr Жыл бұрын

  Awesome! I've always wondered how these things worked. I'm amazed it's so simple. Thanks for sharing.

• 
  @a.r11384 Жыл бұрын

  i watched this video to help me repace the filters of my 2007 c280. thank you so much but i have also seen other videos where the filters were placed the other side up. does it matter which side should be facing up when you initially set them up?

• 
  @JohnSmith-gm4fj Жыл бұрын

  Hi, the orange part goes down into the recess....hmmm...okay the paper goes deep in. Actually, when you take apart the airbox your see the orientation of the filters. Just put the new ones in the same way the old ones were put in.

• 
  @a.r11384 Жыл бұрын

  @@JohnSmith-gm4fj thank you for responding. i think i have it right way up now! cheers and thank you once again!!

• 
  @JohnSmith-gm4fj Жыл бұрын

  Ok so forget my comment about the relay.... I've checked this model and it doesn't seem to have a relay...although the more I read the more I'm thinking it the centrifugal motor switch...which is technically not a relay but kind of operates like one.

• 
  @cyberdaniel82 Жыл бұрын

  Hi, John! I have exactly this model of dishwasher. It's worked perfectly for years and then instantly died: no lights or sounds from the key pad. I replaced the Control Board first, but that didn't fix my issue. I'm likely trying the key pad next. I'm just curious if, in your experience, it's common for the key pad to die entirely. (Most videos I've seen depict a key pad that malfunctions but doesn't crap out entirely). Thanks!

• 
  @JohnSmith-gm4fj Жыл бұрын

  Yes, I've never seen it crap out entirely. Mine was stuck on one position and would not change. I would suggest unplugging the key pad to see if there is 5V or 3V (or any voltage) going from the machine to the key pad. If there is no voltage I would say the key pad may not be the issue.

• 
  @PaulyR. Жыл бұрын

  1 year later, how are you feeling about the whole process? Hamate you still wearing the +2 contacts ? I’m at -14.50 and considering ICL, and this is the only video I was able to find about losing that mid range. I don’t currently wear reading glasses, can read just fine with my glasses or contacts.

• 
  @JohnSmith-gm4fj Жыл бұрын

  I got used to it and as the "nurse" told me I went from blind to being able to see pretty well. I accept having to wear +2 contact lenses and reading glasses for reading, all things considered it was the right choice for me.

• 
  @PaulyR. Жыл бұрын

  @@JohnSmith-gm4fj thanks for the response. Your video has allowed me to ask some pretty important questions I probably would not have thought about !!! Cheers 🍻

• 
  @derick2986 Жыл бұрын

  Kind of sucks having the surgery and still having to wear contacts

• 
  @roberttuss5349 Жыл бұрын

  Thanks. It's exactly what I was looking for.

• 
  @QaiserAlyas Жыл бұрын

  Hey John, thanks for sharing your experience. Any issues now? I’ve watched your update video too. Do you just have standard annual check ups?

• 
  @viselchakforyou Жыл бұрын

  have you had any issues with the microwave touchpad? I have the same wall oven/microwave and 1 min botton does not work very often, the rest work fine.

• 
  @JohnSmith-gm4fj Жыл бұрын

  Hi Larry, I have not had issues with the touch pad, that has to be something they can fix.

• 
  @oldirty8992 Жыл бұрын

  Check that the bowden tube is pushed all the way in (hotend). That looks like a clogged hotend.

• 
  @mixedberries4937 Жыл бұрын

  Ty

• 
  @JohnSmith-gm4fj Жыл бұрын

  And YES I put the plate on and resealed the cover....just didn't want to bore everyone as this video was already going a little long.

• 
  @valeriesmith3218 Жыл бұрын

  Do you have a Phone number.

• 
  @valeriesmith3218 Жыл бұрын

  How much did cost? Where did you order it from.

• 
  @JohnSmith-gm4fj Жыл бұрын

  Hi Valerie, I got it from Vinotemp directly and I think it was 110 or 125... not sure but it's in the video.