Each time I go to create a DHCP server for my VLAN, i get the "invalid" flag.
@seantellsit14314 ай бұрын
Did you add an IP address to your vlan first? There’s a few things you need to Interface > vlan interface Ip address on that vlan interface Then run the dhcp wizard against that vlan interface.
@survivingnetworkingandit20844 ай бұрын
I've only seen that when the VLAN does not have an IP address. DHCP Server needs to be on an interface with an IP address, this includes vlans. Now this can change based on if the DHCP server lives elsewhere (like on a Windows DHCP server). Review the video and see if you might have missed a step. Otherwise, reach out to me in the discord and I'll check your config.
@nezu_cc4 ай бұрын
That's not how you censor a qr code, just because you can't scan it, doesn't mean all the information is lost ;) hcy085947xs sn mynetname
@stevenm457 ай бұрын
Yes, it was helpful Sean, thanks. I have a Public IP but have you tested BTH where the home router is on CGNAT and did it work?
@Anavllama7 ай бұрын
Nice, good that you showed how to send it to users without being at the local site, that was the missing piece I didnt understand. Even better, is that with the relay servers, one does not even need to have a public IP or forward a port....... However as noted, its reliant on third party (but free) and right now a single point of failure.......
@Mn-techPl8 ай бұрын
I have a small problem - on several routers (RB951Ui-2nD and Rb 2011UiAS-IN) in cloud setings i have only first page "CLOUD". No pages "BTH VPN" and BTH VPN WireGuard" - both upgraded 7.12 and second problem On RB3011 (3 different devices tested on 4 diffrent Net Providers) i have all pages but cant upgrade ddns - but funny thing - bihend them are AP (RBcAPGi-5acD2nD) - they started to work properly in seconds .... (but i had info that they are behind NAT) - help :)
@maurijn85688 ай бұрын
Thank you! This is the first video that uses a good topology and follows step by step so that I can also understand what every setting does.
@survivingnetworkingandit20848 ай бұрын
I'm glad it helped. Feel free to pass it on or join the discord to hangout.
@princeofoman8769 ай бұрын
The VPN option does not appear in the IP list
@seantellsit14319 ай бұрын
Are you using the latest version of RouterOS 7.12?
@princeofoman8769 ай бұрын
@@seantellsit1431 Yes
@Radiosabines9 ай бұрын
Great feature on Mikrotik , Thx
@Radiosabines9 ай бұрын
Thx you sir, great way to explain how to configure Mikrotik products on GNS3, all the 4 videos + le bonus are the point to start
@R0cc0Naut11 ай бұрын
Thanks. Just in time for me 👍 I was looking around for ways to do exactly this for a couple of days now.
@survivingnetworkingandit208411 ай бұрын
Woot. Glad I could help. I hope Mikrotik updates Winbox so that the QR codes can show correctly, but overall, it's been a fantastic addition.
@achilleciscotekit11 ай бұрын
Thanks sir !!!
@survivingnetworkingandit208411 ай бұрын
Anytime!
@stevenm45 Жыл бұрын
Many thanks for producing this series. Without your help I probably wouldn't have attempted this as I had assumed I'd need more resources than just the used Intel i5 8Gb NUC with Win10 Pro. I have quite an extensive MikroTik home network that I'm keen to develop.
@survivingnetworkingandit2084 Жыл бұрын
Glad I was able to help. Hopefully it made sense :) The only thing I didn't go into details about is that one cannot pass tagged vlans in and out of vmware player w/o a lot a extra effort. However, vlans within GNS3 will work fine. -Sean
@jeytis72 Жыл бұрын
Hi. I can't see the script you talked about in the videos anywhere. Thanks
@survivingnetworkingandit2084 Жыл бұрын
Ahh. I’ll upload it to GitHub and link in the description today when I get back in after dinner. Ty for the nudge.
@survivingnetworkingandit2084 Жыл бұрын
Here you go: Link to the CRS script: github.com/viptampa/ROS_Scripts/blob/master/CHR%20Specific/CRS328%20rename%20and%20bridge%20script.rsc
@jeytis72 Жыл бұрын
@@survivingnetworkingandit2084 Thanks. it works. just the bridge name is different, but it's ok. Keep up with the good work.
@survivingnetworkingandit2084 Жыл бұрын
If you open the script, you can set the bridge name variable to whatever you'd like to use.
@jeytis72 Жыл бұрын
@@survivingnetworkingandit2084 I know, but it is not a big deal. Thanks
@timnunes Жыл бұрын
Thank you so much for this video. I wanted to get VLANs going on a bridge, as that seems to be what MikroTik recommends for performance reasons, even on a router (with a switch chip). @15:25 sums it up nicely, even though it sounds like you're not a fan of VLANs on bridges. I agree it's pretty convoluted to have to add the bridge as Tagged, but I suppose if you think of it from a router point of view, the router sees the bridge as a switch, so there needs to be something tagged coming from it.
@saylematthews6214 Жыл бұрын
Thank you for this! First video on VLANs on Mikrotik that actually explained it well and not making massive assumptions on knowledge of Mikrotik's way of doing things.
@survivingnetworkingandit2084 Жыл бұрын
groovy :) Glad I could help.
@farshaddashti2 жыл бұрын
Thanks a lot you got yourself a new subscriber, best so far in explaining VLANs in RouterOS
@adrianmego12 жыл бұрын
Thank you a million times over! I have been working with MikroTik for about 5 years and could never find the perfect example of VLANs (or never need to) until I found this video. Perfectly explained and got it working first time!
@survivingnetworkingandit20842 жыл бұрын
Glad it was able to help. :)
@ayodejiazeez6602 жыл бұрын
Detailed and well understood.thanks
@TheNetworkBerg2 жыл бұрын
Very cool video and I really found your stories very interesting. Receiving a written warning can be a shock to someone who is coming fresh into the industry. Heck I think it would even be a shock to me if I received one today because it puts an extra sense of pressure on you and can potentially make it feel as if everything that you are doing is being put under a microscope. I think the most terrifying experience I have gone through in my own career is being retrenched. Wondering how you will make an income while living with someone and also a terrible feeling. Not sure if that's something you've experienced, though if you have I would love to hear your thoughts about that as well.
@survivingnetworkingandit20842 жыл бұрын
Yea, I've been fired / laid off / pay reduced, and everything in-between. All with my wife and kids. Sometimes I'd be very upset or heartbroken, other times I just shrugged and moved on. Now I look back and it was a learning experience. Some companies are awesome, some are not. I try to only work for awesome companies now as I can choose to be picky.
@bowsh0072 жыл бұрын
What is the discord domain to join?
@bowsh0072 жыл бұрын
What is the discord domain to join?
@survivingnetworkingandit20842 жыл бұрын
Hi. The discord link is at the bottom of the description of the video. Come on in!
@miyu86882 жыл бұрын
Thanks alot I will try this and let you know if I can make it work with the tp link router!
@ayadwalid6802 жыл бұрын
Thank you, Please upload more labs about MikroTik Vlans
@survivingnetworkingandit20842 жыл бұрын
Sure. Anything specific you’d like to see?
@ayadwalid6802 жыл бұрын
@@survivingnetworkingandit2084 Thank you, Lab like 6 Routers or switch to by pass vlans to pc1 and got IP address from Dhcp server of vlan 10 for example that from R1., and R2 have vlan 20 with dhcp server and pass for example 4 Routers to dest. pc2 to got ip address from vlan 20. I mean more way about vlans. So lab2 like using vxlan.
@survivingnetworkingandit20842 жыл бұрын
@@ayadwalid680 yea, vxlans will be done... just in a few months. In regards to routers passing dhcp requests... you're probably looking for DHCP relay. I'll put that on my roadmap.
@ayadwalid6802 жыл бұрын
@@survivingnetworkingandit2084 ok sir. I will wait you for upcoming videos. Regards
@AndhiJ2 жыл бұрын
I’m glad you started this channel. The mikrotik community has a potential to get bigger then what it is now if we keep sharing best practices and sane defaults
@survivingnetworkingandit20842 жыл бұрын
Thank you for the kind words. Mikrotik has a lot of use cases, and hopefully, I can share my experience to help others.
@TheNetworkBerg2 жыл бұрын
Thank you for sharing your background and what you are planning to do with this channel, I look forward to seeing the content you will be releasing and watching your channel grow! Just some tips from a small KZreadr like myself. 1. Keep uploading content and stay positive! KZread is a game of attrition, I have had many ups and downs with my own channel. In the beginning it may feel like you are just creating content for yourself as views may be low and you might only see someone subscribing every other day or even week. Even though it feels like your work is going unnoticed there are many people like myself that will find your channel and will also spread the word about it. 2. Create "Attractive" titles and thumbnails. This sounds a little silly, however, KZread's algorithm tends to promote videos that it sees can potentially catch the eyes of more viewers. I've seen amazing content creators gain less views on their videos simply because they have either a very generic thumbnail and title. Or they just don't care about it so they let KZread choose some stillframe of the video as a thumbnail. The algorithm tends to just ignore videos like these. So unless you have a big following you will be missing views just because of the "KZread game" 3. If you receive critique, even if it's in the form of someone trying to troll you. Thank them for their viewpoint, but never let an opposing viewpoint make you feel like your video isn't good enough to be on the platform. You are a content creator and you are sharing your own viewpoint and experiences on a certain topic. Even if someone doesn't agree with that viewpoint or considers it incorrect, you are giving your own take on something. (You are allowed to make mistakes, just don't let it bother you too much and if it is something critical you can either re-upload the video stating that something was incorrect or create a pinned comment stating what wasn't correct) 4. Be open to change, sometimes viewers will let you know that there are things that you can do to improve your videos. A very common thing is, and I struggled with this as well is many viewers would tell me that my text is too small in Winbox/Terminal window. Now for me working on a desktop at 1080p everything looks normal. But we rarely consider something that is normal to us is different to other people. Many people might actually be trying to view content on a phone or similar devices and I could definitely see why someone would tell me the text sizes are too small when seeing the content in a different lens. 5. Find tools that can help you create your videos and make the content in a way that you enjoy. I've gone through tons of programs and sites to try and improve my own KZread channel. Here's some of the software/services I've been using over the years just to try and up my production a little bit, some of these are paid for services. EVE-NG Pro (Network Emulation) VMware Workstation Pro (VM Hypervisor) Canva (Thumbnails + Intro/Outro sequences) Filmora X (Video Editing) OBS (Video Recording) Audacity (Voice Recording) Voicemod (Voice Enhancer/Changer) I think those are some of the things I wish someone would have told me when I got into KZread. Good luck with the channel and you are always welcome to message/email me if you just want to talk.
@survivingnetworkingandit20842 жыл бұрын
Thank you so much. I’m going to re-reread and digest this.
Пікірлер
thank you
you are welcome :) Hopefully it helps.
Each time I go to create a DHCP server for my VLAN, i get the "invalid" flag.
Did you add an IP address to your vlan first? There’s a few things you need to Interface > vlan interface Ip address on that vlan interface Then run the dhcp wizard against that vlan interface.
I've only seen that when the VLAN does not have an IP address. DHCP Server needs to be on an interface with an IP address, this includes vlans. Now this can change based on if the DHCP server lives elsewhere (like on a Windows DHCP server). Review the video and see if you might have missed a step. Otherwise, reach out to me in the discord and I'll check your config.
That's not how you censor a qr code, just because you can't scan it, doesn't mean all the information is lost ;) hcy085947xs sn mynetname
Yes, it was helpful Sean, thanks. I have a Public IP but have you tested BTH where the home router is on CGNAT and did it work?
Nice, good that you showed how to send it to users without being at the local site, that was the missing piece I didnt understand. Even better, is that with the relay servers, one does not even need to have a public IP or forward a port....... However as noted, its reliant on third party (but free) and right now a single point of failure.......
I have a small problem - on several routers (RB951Ui-2nD and Rb 2011UiAS-IN) in cloud setings i have only first page "CLOUD". No pages "BTH VPN" and BTH VPN WireGuard" - both upgraded 7.12 and second problem On RB3011 (3 different devices tested on 4 diffrent Net Providers) i have all pages but cant upgrade ddns - but funny thing - bihend them are AP (RBcAPGi-5acD2nD) - they started to work properly in seconds .... (but i had info that they are behind NAT) - help :)
Thank you! This is the first video that uses a good topology and follows step by step so that I can also understand what every setting does.
I'm glad it helped. Feel free to pass it on or join the discord to hangout.
The VPN option does not appear in the IP list
Are you using the latest version of RouterOS 7.12?
@@seantellsit1431 Yes
Great feature on Mikrotik , Thx
Thx you sir, great way to explain how to configure Mikrotik products on GNS3, all the 4 videos + le bonus are the point to start
Thanks. Just in time for me 👍 I was looking around for ways to do exactly this for a couple of days now.
Woot. Glad I could help. I hope Mikrotik updates Winbox so that the QR codes can show correctly, but overall, it's been a fantastic addition.
Thanks sir !!!
Anytime!
Many thanks for producing this series. Without your help I probably wouldn't have attempted this as I had assumed I'd need more resources than just the used Intel i5 8Gb NUC with Win10 Pro. I have quite an extensive MikroTik home network that I'm keen to develop.
Glad I was able to help. Hopefully it made sense :) The only thing I didn't go into details about is that one cannot pass tagged vlans in and out of vmware player w/o a lot a extra effort. However, vlans within GNS3 will work fine. -Sean
Hi. I can't see the script you talked about in the videos anywhere. Thanks
Ahh. I’ll upload it to GitHub and link in the description today when I get back in after dinner. Ty for the nudge.
Here you go: Link to the CRS script: github.com/viptampa/ROS_Scripts/blob/master/CHR%20Specific/CRS328%20rename%20and%20bridge%20script.rsc
@@survivingnetworkingandit2084 Thanks. it works. just the bridge name is different, but it's ok. Keep up with the good work.
If you open the script, you can set the bridge name variable to whatever you'd like to use.
@@survivingnetworkingandit2084 I know, but it is not a big deal. Thanks
Thank you so much for this video. I wanted to get VLANs going on a bridge, as that seems to be what MikroTik recommends for performance reasons, even on a router (with a switch chip). @15:25 sums it up nicely, even though it sounds like you're not a fan of VLANs on bridges. I agree it's pretty convoluted to have to add the bridge as Tagged, but I suppose if you think of it from a router point of view, the router sees the bridge as a switch, so there needs to be something tagged coming from it.
Thank you for this! First video on VLANs on Mikrotik that actually explained it well and not making massive assumptions on knowledge of Mikrotik's way of doing things.
groovy :) Glad I could help.
Thanks a lot you got yourself a new subscriber, best so far in explaining VLANs in RouterOS
Thank you a million times over! I have been working with MikroTik for about 5 years and could never find the perfect example of VLANs (or never need to) until I found this video. Perfectly explained and got it working first time!
Glad it was able to help. :)
Detailed and well understood.thanks
Very cool video and I really found your stories very interesting. Receiving a written warning can be a shock to someone who is coming fresh into the industry. Heck I think it would even be a shock to me if I received one today because it puts an extra sense of pressure on you and can potentially make it feel as if everything that you are doing is being put under a microscope. I think the most terrifying experience I have gone through in my own career is being retrenched. Wondering how you will make an income while living with someone and also a terrible feeling. Not sure if that's something you've experienced, though if you have I would love to hear your thoughts about that as well.
Yea, I've been fired / laid off / pay reduced, and everything in-between. All with my wife and kids. Sometimes I'd be very upset or heartbroken, other times I just shrugged and moved on. Now I look back and it was a learning experience. Some companies are awesome, some are not. I try to only work for awesome companies now as I can choose to be picky.
What is the discord domain to join?
What is the discord domain to join?
Hi. The discord link is at the bottom of the description of the video. Come on in!
Thanks alot I will try this and let you know if I can make it work with the tp link router!
Thank you, Please upload more labs about MikroTik Vlans
Sure. Anything specific you’d like to see?
@@survivingnetworkingandit2084 Thank you, Lab like 6 Routers or switch to by pass vlans to pc1 and got IP address from Dhcp server of vlan 10 for example that from R1., and R2 have vlan 20 with dhcp server and pass for example 4 Routers to dest. pc2 to got ip address from vlan 20. I mean more way about vlans. So lab2 like using vxlan.
@@ayadwalid680 yea, vxlans will be done... just in a few months. In regards to routers passing dhcp requests... you're probably looking for DHCP relay. I'll put that on my roadmap.
@@survivingnetworkingandit2084 ok sir. I will wait you for upcoming videos. Regards
I’m glad you started this channel. The mikrotik community has a potential to get bigger then what it is now if we keep sharing best practices and sane defaults
Thank you for the kind words. Mikrotik has a lot of use cases, and hopefully, I can share my experience to help others.
Thank you for sharing your background and what you are planning to do with this channel, I look forward to seeing the content you will be releasing and watching your channel grow! Just some tips from a small KZreadr like myself. 1. Keep uploading content and stay positive! KZread is a game of attrition, I have had many ups and downs with my own channel. In the beginning it may feel like you are just creating content for yourself as views may be low and you might only see someone subscribing every other day or even week. Even though it feels like your work is going unnoticed there are many people like myself that will find your channel and will also spread the word about it. 2. Create "Attractive" titles and thumbnails. This sounds a little silly, however, KZread's algorithm tends to promote videos that it sees can potentially catch the eyes of more viewers. I've seen amazing content creators gain less views on their videos simply because they have either a very generic thumbnail and title. Or they just don't care about it so they let KZread choose some stillframe of the video as a thumbnail. The algorithm tends to just ignore videos like these. So unless you have a big following you will be missing views just because of the "KZread game" 3. If you receive critique, even if it's in the form of someone trying to troll you. Thank them for their viewpoint, but never let an opposing viewpoint make you feel like your video isn't good enough to be on the platform. You are a content creator and you are sharing your own viewpoint and experiences on a certain topic. Even if someone doesn't agree with that viewpoint or considers it incorrect, you are giving your own take on something. (You are allowed to make mistakes, just don't let it bother you too much and if it is something critical you can either re-upload the video stating that something was incorrect or create a pinned comment stating what wasn't correct) 4. Be open to change, sometimes viewers will let you know that there are things that you can do to improve your videos. A very common thing is, and I struggled with this as well is many viewers would tell me that my text is too small in Winbox/Terminal window. Now for me working on a desktop at 1080p everything looks normal. But we rarely consider something that is normal to us is different to other people. Many people might actually be trying to view content on a phone or similar devices and I could definitely see why someone would tell me the text sizes are too small when seeing the content in a different lens. 5. Find tools that can help you create your videos and make the content in a way that you enjoy. I've gone through tons of programs and sites to try and improve my own KZread channel. Here's some of the software/services I've been using over the years just to try and up my production a little bit, some of these are paid for services. EVE-NG Pro (Network Emulation) VMware Workstation Pro (VM Hypervisor) Canva (Thumbnails + Intro/Outro sequences) Filmora X (Video Editing) OBS (Video Recording) Audacity (Voice Recording) Voicemod (Voice Enhancer/Changer) I think those are some of the things I wish someone would have told me when I got into KZread. Good luck with the channel and you are always welcome to message/email me if you just want to talk.
Thank you so much. I’m going to re-reread and digest this.