Congratulations, you have made it to the channel of Kevin Reese! I live in sunny South Carolina, and I love sharing videos with my KZread family! I post videos of anything and everything as it pertains to my day-to-day life and things I do, which is always interesting! Please SUBSCRIBE to my channel to check it all out and turn on notifications by clicking the little bell under any of my videos to be the first to know when I post a new video! Be sure to follow me on social media! Have an awesome day!
THANKS FOR WATCHING YA'LL!
Пікірлер
Yes, you can roll it on like this, strain to pull it and squash your fingers, or you can simply use the provided hole for a 1/2" drive pull bar in the tensioner bracket. Use leverage to take the tension off the belt and just drop it on.
Do you recommend on my 2001 f150 V6
How long it take you to get everything done
You made my day, Kevin. I always hated peeling eggs. Today we hardboiled about 5 dozen eggs to make red beet eggs. I followed your advice and added salt to the water. We do not use Morton salt so I used Redmans Real Salt, about a small scoop per dozen eggs. They all shelled perfectly except one which might have been cracked before hand. Some eggs we used were old and some were fresh but that did not make a difference! I notice this video had very high views which tells me there are a lot of people out there that have had trouble peeling eggs Again thanks much.
Hey man, are you using this pressure washer on a 14 amp breaker or a 20? Good video sir!
wow
@@ronin_hanson5534 thanks
Looks like you have the headers on the wrong ends
Your video is very informative,the tips helped out tremendously. But yeah thanks for being so thorough this was the best video of all I watched about changing out fuel pump..
Thank you I am glad it was helpful
There is a latch on the back of your seat to pop the seat up and out of the way Good video 😎
Some one please answer these questions how come when i had my old belt on it never was squealing i put a new belt on and its squeals alot also before i put the new belt on my bike would stop by its self when let off throttle wit new belt on it just keeps rolling when let of throttle someone please help?!
Love hearing you all. That's what we say here in KY.
why not just add ice to the cool water to cool down the eggs.???
Ice works too
I believe contaminated oil is the culprit for many engine problems. Once the oil has deteriorated it poisons gaskets, rubbers and everything else with its acidic properties. You find cars with regular oil change intervals to run smoothly and having no leaks after 20-30 years on original rubber parts.
Oil changes are important
Damn! The best YT video about this charger, for sure. Thank you so much ! It helps me a lot!
You're welcome
Instead of pulling the tensioner by hand, atleast in some models they provide a square hole on the arm of the tensioner that fits a ratchet so you can privet the pulley that way.
That’s a fake Microtech bud
What makes you think that?
Is the oil fully synthetic or semi synthetic
this work for clutches that wont engage?
It's worth a try, but probably need new clutch.
Are they reliable motors
Thanks for posting this video
Yw
You should’ve installed a single din instead.
Would have been easier, but I got a deal on this one and I still love it
I use an air chisel to clean mine. Works very well.
After about 5 years I’m finally installing my wife’s radio Thank you for this. Best video I’ve seen
Thank you!
This could’ve been a 30 second video Quit wasting my time
Hey, thanks for making this video, I needed to check where the oil filter was located before I started to do it myself. I hope you are doing well.
Glad this helped you!
Thanks for the info, I just bought a 2024 and it is exactly the same, right at the bottom of the hash mark. Yamaha must be being cheap with the oil :)
Thanks for the information!
Thanks kevin
You're welcome
6 quartz of oil is like 5.6ltrs. Is that gallon 5.6ltrs or did you have to pour another 0.6litres to balance tjings up?
Oh yeah. I see you later poured a little. Thanks. I totally enjoyed your video.
@ikedichukwuchesa413 thank you for watching I hope it helped you.
@@KReesethebeast What if you hadn't poured that little extra, would anything had gone wrong with the engine?
@@ikedichukwuchesa413 as long as it is between the lines it is good
02 f150 king ranch 5.4 mint condition! This is the 10th generation comment section where yall at?
All of this is great, but mine is stuck pushed in around a quarter of an inch with zero room to insert anything around, above, or below it.
Most important thing to point out is that the knives are designed for impact and scraping which is why they are chisel ground
Worked perfect for a 2008 650 Brute Force.There are a few versions depending on year and whether 650 or 750. Thanks a lot!!!
This is a job where you wish you had a third hand
Exactly
Hey man i tryed putting my switch back to on but it seems like its not clicking and goes back to the middle somewhat. Can you tell me what the part is called?
Mine flashes quickly but then stops what do I do
Can i hookup my sony atmos speakers with this amplifier
Thank you!
Thank you brother. Saved me a trip to repair center!
Some salt definitely goes into the egg. The process is called osmosis. Osmosis is something goes from a high concentration to low concentration through a membrane. Egg shells are porous membranes believe it or not. Won’t be a lot, but there will be some transfer.
So if I do this it won’t cause any further problems ?I got a Parari 700 vtwin
If it is what you want to do, I'd do your research to see if it is the right choice for your riding style.
Turn the screws to the passenger side or to the left to lower and turn them to the driver side to raise. It's the same direction on both sides.
Just came across your video. It’s not nice to copy post 10. He’s first last and forever and nobody’s better looking than him anyway.
Thank You!
You're welcome
Just for archival purposes the problem with the walbro carbs on theae saws was the vent didn't work. Take off the top cover, drill a hole in it, reinstall.
I'll keep that in mind for next time thanks for sharing
Salt is stupid, it's just raising the temperature by 1 degreee, NO EFFECT at all, same with Vinegar, it just breaks down a bit of the Calcium, it's merely a ton of myths that people still believe, it's stupid
This video helped me a lot, I’m a 17 yr old and this was my first time changing oil in my ford edge. Super helpful
So happy this helped you.
I am 6 years late but great video
Thanks!
What about crocodile eggs?😅
i have no idea if anyone will reply. so i add coolant to the reservoir then the radiator itself, run it to operating temp, top off if needed then run it one more time?
Great video ihavea brute force300 wasn't moving after kidflipoed it electric don't work as far seeing gages but now runs with battery but iput in high seems ok it soon swithto low seems lose almost all power barely goes ten kmh so seems only best working in high or skip right past gear anyone know what's wrong how fix this I'm not mechanical or much atvknoweldge I moved and alot stuff here is ATVs durtbikes so git this and now this issue ineed help advice from anyone please thnks