Пікірлер

• 
  @hotrod19352 күн бұрын

  Ok good choice with the cream , there is a thing called fine line masking tape in various widths down to 1/8 it's flexible so you can curve it nice and you mask up to it unlike the 1/2 inch which creases.

• 
  @krismann91012 күн бұрын

  This is why I love doing youtube via you guys are always so helpful thanks for the tips love them glad you like the colour choice just hope the interior will look nice with that colour 😀 😊

• 
  @slaktriffid2 күн бұрын

  You de Manns......:)

• 
  @krismann91012 күн бұрын

  @@slaktriffid Cheers Mann glad you like 👍

• 
  @krismann91012 күн бұрын

  Thanks man glad you like

• 
  @RobertSmith-jl4yw3 күн бұрын

  Your garage is all back-to front!

• 
  @RobertSmith-jl4yw3 күн бұрын

  ....when you're in the shot.

• 
  @RobertSmith-jl4yw3 күн бұрын

  ....sometimes.

• 
  @krismann91012 күн бұрын

  Yeah I know right I can tell Ian hasn't been for a while he has a way of making the garage look so tidy

• 
  @kouroshrefaghat3 күн бұрын

  Lovely colour combination and quality finish. Good job mate. 👏🏼

• 
  @krismann91013 күн бұрын

  Thank you! Cheers!

• 
  @cookiemonster229923 күн бұрын

  Nice to see a bison vid, i have the 4.2m with a 6 hp yam just for pottering and exploring local rivers, gets upto 14 knts gps and the 6 hp just sips the fuel, great fun. 👍❤️🇬🇧

• 
  @krismann910122 күн бұрын

  Thanks for the comment nice to hear from another bison owner I love the colour and really impressed with the quality how long have you jad yours ?

• 
  @cookiemonster229922 күн бұрын

  @@krismann9101 I've had mine since early 2015 with no issues so far 👍

• 
  @nickb539128 күн бұрын

  @19.09, It's Austin A30/A35 Owners Club

• 
  @nickb539128 күн бұрын

  Very nostalgic with the British Railway 'Blood & Custard' 👍

• 
  @bernarddegrasse875328 күн бұрын

  ESM sell parts for these

• 
  @krismann910128 күн бұрын

  Thank you I'll definitely check that out many thanks

• 
  @nickb539128 күн бұрын

  Also the Owners Club does & when you buy from the club it helps to fund later reproduction products

• 
  @103erik29 күн бұрын

  Lookin' good! Keep up the good work.

• 
  @russelblackwell604129 күн бұрын

  white roof i guess it will grow on me

• 
  @radds019129 күн бұрын

  Always look forward to the A30 videos. Looking great & love the cream roof 👍👍👍

• 
  @krismann910129 күн бұрын

  Thanks man I'm battling with the interior colour original we were gunna gi cream to but looking more like we will go red what do you think 🤔?

• 
  @radds019129 күн бұрын

  @@krismann9101 Hi Kris … like red for the interior but still like the idea if a cream dash think it would be a good contrast. Either way it will look great. Just saw A30 bumpers on eBay for £96. ! Cheers .. Ian

• 
  @chrislight932829 күн бұрын

  Yay!

• 
  @krismann910129 күн бұрын

  Sorry its been a while hope you enjoy 😉

• 
  @Holladys-vf4rbАй бұрын

  Good boats I found a 20hp worked well with 3up , great vid 👍

• 
  @krismann9101Ай бұрын

  I love to put a 20hp it's did plane with a 9.9hp but I'd prefer something bigger its on my wishlist glad you enjoyed the vid many thanks kris

• 
  @BarbedhookfishingАй бұрын

  Nice to see another review on the Bison , Such great boats!! They would do well in the current market if they got the marketing right!

• 
  @krismann9101Ай бұрын

  Not sure why I went for one tbh I love inflatable boat fishing and honwave and everything else I'm the end I went for the same belive I have in my guitar you'll play what you love and my heart loves the full olive colours and black ⚫️ I'd never heard of them but pleases to report I'm very impressed so far looking forward to seeing what she will put up with

• 
  @BarbedhookfishingАй бұрын

  @@krismann9101 It would be some boat with a 25hp motor on the back inknow that for sure! I've had alot of experience in the Honwave T40 with a 25 and it's really good, but I do love my T35 with a 20hp, same speed 24mph. I love olive & black myself and I do love playing abit of guitar too 😄😄👍 Enjoy the boat! Get a trailer and keep it inflated and you'll be out all the time 😄😎🎣

• 
  @krismann9101Ай бұрын

  Omg yes I'd love a 25hp on there one day you never know

• 
  @krismann9101Ай бұрын

  Love the nortic inflatable seat watched the vid the other night good one looks awesome 👌

• 
  @russelblackwell6041Ай бұрын

  very hard as you say many factors small area to work compressor can't give enough air volume for you to put it on thicker over a wider area takes time and patience mate your having a go learning too

• 
  @triumphstuАй бұрын

  Anything getting covered with carpet or material just leave it, I'll be fine

• 
  @krismann9101Ай бұрын

  Yeah I mean it gunna get covered why worry about the cream colour it's only gunna get covered chears for the comment hope your enjoying the content many thanks kris

• 
  @alwood91482 ай бұрын

  and paint a sound deadner on the floor before u line with underlay then carpet it ,will be very quiet warm and cosy and not expensive

• 
  @alwood91482 ай бұрын

  i ,ve done similar warming tips and usually thin 50/50 or just prime everything then rub back 600 wetdry

• 
  @NicholasKimber2 ай бұрын

  love this boys !! so sorry i couldn't come this weekend , Will deffo be out next !!

• 
  @tonykennedy47492 ай бұрын

  Can't wait to try it out,not sure it will fit in my fiat500😂😂😂

• 
  @brisnotsowise87142 ай бұрын

  Hi guys, enjoying the content :-) I feel your struggle with the little compressor though, been there myself. I have recently been bought a new one by my brother...was very happy with the old one, and he never thought about what I was going to do with 2. If you want to have a chat about it let me know, it will run any air tool you need...it's a beast! ;-) Bri

• 
  @krismann91012 ай бұрын

  Hiya thanks so much for tye comment and yes the small compressor is annoying can't wait to get a new one I'm saving up glad your enjoying the content many thanks kris

• 
  @brisnotsowise87142 ай бұрын

  @@krismann9101 Hi Kris, I have an Ingersol Rand for sale, 11 bar pressure, (tested to 16.5 bar) 150 ltr tank, old but very reliable, like me ;-) Would do you a good deal for the channel if interested? Bri

• 
  @DC-dp3hk2 ай бұрын

  Take the experts view on the clear coat by all means, as I said I'm no expert. I've never resprayed a car but my most recent experience of using clear coat has been on a set of Rostyle wheels and if I say so myself it came out great and the black sections came out with a really high gloss that I'd never get otherwise. If I knew how to do it I'd upload a photo. BTW I used the method mentioned in the last message to stop the black bleeding onto the silver and it worked perfectly so give it a go! (Remember only light mist coats over the masking tape and let each mist coat dry first)

• 
  @krismann91012 ай бұрын

  Thanks so much for the information yeah I'm definitely in two minds about putting a clear coat on I might just do a little experiment on it to see what happens as I'm curious hope your enjoying the progress many thanks kris

• 
  @DC-dp3hk2 ай бұрын

  Love the videos and all the banter, great!! Looks like you're building up a great team too!

• 
  @DC-dp3hk2 ай бұрын

  A way I've found to stop the paint bleeding under the edge of the masking tape is to first of all make sure the edge is pressed down well and then give two or three very light mist coats, letting each coat dry first, over the edge of the masking tape. That then seals the joint of masking tape to new colour without enough paint to bleed under the edge. Then when you spray your full coats it won't get under the edge!

• 
  @as3cs32 ай бұрын

  I can't tell you exactly what _basecoat_ is made of but it's only for use under clear. If you have a solid colour you should use single-stage 2K (dangerous) or a 1K 'cellulose' product which is probably acrylic lacquer. I think _basecoat_ may also be 1K acrylic but have heard it's not as robust and also dries matte

• 
  @reecegregor45002 ай бұрын

  Ian must walk the plank

• 
  @DC-dp3hk2 ай бұрын

  Ha ha, love the banter, pleased Ian has been let off the hook. It must've been worth every penny of the tenner he paid me to say that! Keep up the good work, love the videos!!

• 
  @malcsurfleet38882 ай бұрын

  Don’t clear coat it just another good compound then wax it it’ll still look fantastic,you are running the risk of reaction with with the compound any tiny bit you might miss could spoil it.

• 
  @colinblick89462 ай бұрын

  I used to work in compressed air…… a moisture filter would help…….a condenser dryer even better…… but horses for courses 👌🏽😎if I had my time again I’d have one of these an drop a 1275 innit😉💪🏼….. it’s coming on well.

• 
  @krismann91012 ай бұрын

  I know don't I'd absolutely love to put a 1275 in it would fly lmao 🤣 you never known it sound like the sort of crazy think kris might do tbf. Thanks for the information regarding the compressor anything helps its such a hard tool to work with l. Ideally I need a bigger one but pennies are a little tight so I will try any suggestion to make this one work better

• 
  @krismann91012 ай бұрын

  Thanks for the comment hope your enjoying the channel many thanks kris

• 
  @103erik2 ай бұрын

  I agree with the previous comment. I wouldn't clear coat it. Clear coating is a modern technique created to prevent the metal flakes in modern paint from oxidizing. In the day the car was built there was no such thing. Paint was single stage, and protected with a coat of wax. I'd do it the same way. In fact I am doing it the same way with the 1966 Volvo Amazon I'm restoring.

• 
  @krismann91012 ай бұрын

  Wow a volvo amazon that's awesome 👌 now that two of you have said this I'm definitely now thinking of leaving it out I did wonder if it was even worth bothering with and its only more work anyway thanks so much for the comment hope your restoration is going well many thanks kris

• 
  @thomasmacbride80062 ай бұрын

  More good progress 👌 but a word of caution I'm not sure if it would be a good idea to clear coat it because you are polishing the colour coat first clear coat is very sensitive and reactive to polish and silicone even if uv just got a bottle off car polish in your garage it could affect it and your compressor is just too small you need a decent supply of clean air and a reasonably good spray gun with a 1.3 set up so a few things to mull over but good luck anyway mate👍

• 
  @krismann91012 ай бұрын

  So helpful I had wondered if it was even worth putting clear coat on but that's two comments saying the same thing so I may well leave the clear coat of lol 😆 suppose it's just creating more work anyways many thanks for the comment kris

• 
  @thomasmacbride80062 ай бұрын

  @@krismann9101 No problem man I'm not an expert or anything I'm just like you I use trial and error learn as I go along iv been fixing and restoring cars tractors and stuff for over twenty years and still learning

• 
  @Zesty953 ай бұрын

  Specky!

• 
  @krismann91012 ай бұрын

  Hahaha 😆 that's so funny that someone had noticed that just before I edit out lol me and Ian watch alot of carherine tate we both wear glasses so have be calling each other specky no offence intended 😄

• 
  @Zesty952 ай бұрын

  @@krismann9101 You’ve called me Specky in real life before too Kris ;)

• 
  @krismann91012 ай бұрын

  Is it reece ? 🤔

• 
  @Zesty952 ай бұрын

  @@krismann9101 nope. I’m not at your branch of employment 😉

• 
  @krismann91012 ай бұрын

  Ahhh is it sean

• 
  @tonykennedy47493 ай бұрын

  Walk the plank YES

• 
  @krismann91012 ай бұрын

  Haha 😄 🤣

• 
  @richreece88403 ай бұрын

  Is it base and clear or 2k solid you using

• 
  @krismann91012 ай бұрын

  Tha k you for all the helpful advice and I think it's base and clear

• 
  @richreece88403 ай бұрын

  Use a da with 800

• 
  @richreece88403 ай бұрын

  Don’t use fairy liquid pointless your working twice as hard just da with 800

• 
  @SuperMickcox2 ай бұрын

  Why not I've used it for years

• 
  @richreece88403 ай бұрын

  Make sure you use guide coat when blocking ( only trying to help )

• 
  @richreece88403 ай бұрын

  Why use synthetic paint shop should have supplied 2k

• 
  @richreece88403 ай бұрын

  Watch the grey primer doesn’t over spray on you red panels - you’ll Have more work to do

• 
  @richreece88403 ай бұрын

  If you warm the primer up it flows better ( come from painting lots of cars over the years )

• 
  @richreece88403 ай бұрын

  No One uses enamel Use 2k

• 
  @richreece88403 ай бұрын

  Get rid of all polish which contain. Silicon when painting your car - other wise you’ve a problem

• 
  @richreece88403 ай бұрын

  Use fine line tape ,

• 
  @richreece88403 ай бұрын

  What paint did you use hope it was 2k paint not synthetic no one uses any more

• 
  @robertking72323 ай бұрын

  enamel go,s on better and self flattens out if the panels are hot, like the car hs been left in the sun at about 28 degrees celsius for bout 45 minutes or so

• 
  @krismann91013 ай бұрын

  Okay that handy to know would it work if I had the heating on high in the garage before painting? Thank you so much for the info man

• 
  @malcsurfleet38883 ай бұрын

  How about a heavy cut compound on a D A to get your shine,I’m not an expert but i think it would improve your finish.

• 
  @krismann91013 ай бұрын

  Yes u totally agree I think what was happening the original coats we put on weren't think enough so when we flattened it's showed through so fingers crossed I'm gunna paint a couple more coats on and that should work nicely thank so much for the comment many thanks kris

• 
  @DC-dp3hk3 ай бұрын

  Sorry to bombard you with messages but going back to the clear coat idea I would think that if you took out the worst of the 'orange peel' first and then spray it all with clear coat that would possibly give you your desired finish, save you a lot of work and also protect your paint All the modern cars are finished that way. As I said I'm not expert but it just seems to make sense. It might just be worth asking someone knows.

• 
  @krismann91013 ай бұрын

  That's interesting because originally I thought that was the idea of the clear coat . Before I do the whole car I'm going to experiment abot more but You might be right we might just be making hard work for ourselves lol thanks again kris

• 
  @k19tto3 ай бұрын

  Hi Kris & Ian, I think that you have enough paint on the car to wet sand back as it is, get it down so that your high spots have gone , then i would machine polish use G3 ( not the liquid stuff the harsher one like a paste) keep this stuff wet and take your time not to burn the paint, plenty of water keeping it cool. It will be like a mirror when finished though time consuming. Looking good though, well done both of you.

• 
  @krismann91013 ай бұрын

  Interesting because the compound we experimented with was g3 liquid I will take a look online to find the harsher stuff good shout. Yeah we thought so I mean it's had 2 coats of paint the only thing is tge compressor is very weak we are now wondering is it didn't blast enough paint on so we are gunna just put another coat on the hood just to see if it makes any difference 🤔 many thanks for the info kris

• 
  @thomasmacbride80063 ай бұрын

  It's starting to take shape now mate 👌 I'm surprised that you dont use a paint strainer for your paint they cost pennies to buy I allways use them you would not believe some of the crap that is in paint even expensive paint . And on the orange peel that happens when uv got too much paint and not enough air iv discovered that cheaper paint guns need a lot more air to atomise paint than the expensive guns usually around fifty psi . And on the subject off flattening paint back use a soft sanding block and start with 1200 grit wet and dry paper then 2000 grit and finish with 3000 iv allway found this works best 👌

• 
  @russelblackwell60413 ай бұрын

  Looks like water in some of the paint from the compressor put compressor on the floor allow a loop of hose from the compressor then attach a water trap then connect remaining compressor hose to water trap and other end to your spray gun this traps condensation or water in the looped hose and eventually goes into a water trap and not straight from compressor to your gun my father had the same issue the water spots appeared after a few days

• 
  @DC-dp3hk3 ай бұрын

  BTW I don't think Ian should have to walk the plank. He seems like one of life's good guys so definitely doesn't deserve it!

• 
  @krismann91013 ай бұрын

  We had a good laugh when you sent this ian is so pleased to hear someone likes him I might spare jim his fate of walking the plank lol 😆