Enjoying the R/C hobby in The Great Canadian Outdoors. Channel inspired by other Canadian R/C Channels, and the 3D printing community. Video content includes all different RC related topics and 3D Printing of Scale Accessories for the Rigs and the all important scale garage.
Active Member Of The Canadain Armed Forces for 32+ Years.
Пікірлер
Looks fantastic! Interesting terrain and challenging too!
Thanks for watching and commenting, the terrain is amazing and there is always a challenge to be found.
Just came across your video searching for cause of the same problem…. First run out of the box with a clicking noise!!! Was the pinion grub screw loose? Was it out of mesh? That’s a lot of tear down from what I can tell to get to the pinion with no spur gear in it. Can you clarify a bit
The pinion was loose, had to pull it out and pull the motor to find the problem the grub was not properly tightened down and the pinion was slipping in and out of mess and then fully out of mess.
@@radioactivescalerc awesome thank you. I’ll start my tear down tomorrow. Fingers crossed 🤞🏽 subscribed to see the update!
watch till the end of this video if you haven't I show how I got it out, was not to bad, good luck and I hope it just the same issue I had. I did not have to disconnect and of the shifting cables when I did it. Good luck. 👊👍
Is dragbrake adjustable v2
No there is no drag brake adjustments on the stock ESC's
Thank you.
No worries 👍
My deadbolt is so fast.
You can change out the motor to a better motor that will give you more slow crawl like the Furitek motors and ESC's
My deadbolt v1 is faster than bronco v2. Why topspeed
They made some changes to the ESC for a better slow crawl
Same as mine. V1deadbolt grinds and loud gear sound compared to v2 bronco smooth and quiet. My v1 was greased at diffs
Ya the V2 ESC is much better then the first verson.
GREAT new look!
Thank you!
Great detailing and nice crawl, always enjoy watching the 6’s crawl the most, have fun and be safe brother 🤙🇨🇦🇨🇦🤙
Thanks bro I think it looks much better, I love watching them also they are one of the most capable rigs and I really enjoy driving them. Thanks for watching and commenting 👍 👊🇨🇦🇨🇦
Nice run man. Rig is looking sharp.
Thanks Durp, the little extra work makes a huge difference
Hey R.A.S. Looking good man I like the decal kit
Big Z, good to hear from you. Thanks bro the cong look so much better with the body fixed up. Thanks for stopping by and hope ypu are having a great summer 👊👍🇨🇦
@@radioactivescalercSame to you Duane I hope your summer is going good, I am doing great lots of fishing in Lake Erie with my dad catching pickerel
@@radioactivescalercI like the scale door hinges I might have to get some for my six
@ZsRcAdventures let me know I can print a set for you. Awesome to hear you are enjoying the fishing, summer is going ok, not getting out trailing as much as I would like but heading to the mountains camping in August for a few days and taking all the rigs I have space for
@@radioactivescalerc that will be good time up in the mountains 🏔️ I love Alberta went there once when I was 16 it’s beautiful country, you will get some good video up there with the rigs man can’t wait!!! I appreciate the offer but I feel like you have given me so much already all those scale accessories or really top notch quality man
Dang Radio, that was some terrible QC from that company. Just watching what happened, I doubt Ill ever buy anything from that company. Lucky fix at the end too, glad it worked out for ya man.
Ya RR4WD is one of my fav scale rigs, this one has been trouble form day one, hope I have it all sorted out. We will see the next time I go out I will take and do another test run video. Thanks for watching brother
Glad you got it sorted out. I sure hope it works well for you
Me too, this one has been a issue for me right out of the box. Cheers!!!
Nice video 👍 I think this rig needs some stiffer springs in the back and some wheel weights up front.
It actually is pretty good. Check out my first Run video if you haven't already it is a half decent climber for a box stock rock Racer. Thanks for the suggestion, watching and commenting 👍
I want to make a SCX24 look like one of these. hehe
That's would be a sweet 24th rig forsure.
MY wpl had a click when only i would turn one way. Couldn't figure it out for awhile. Then noticed on Other side when i would turn the Top Nuckle of a shock would click into place, then out. UGH.... I Love Rcing :) This rig is sick if it had no problems.
I hope it was the pinion starting to loose connection with the planetary drive gear, I have to get it out and test it soon to see, but I am now going to check the shocks, 🤣 thanks for watching and commenting 👍
Typical RC4WD, prettiest rigs in existence but seem to have more durability and QC issues than most other brands.
I Usually build my RC4WD rigs from the kits to male sure all good this one is not available as a kit so it is one of the first times I have had so many issues with one of there rigs.
Still a cool looking rig but the problems it has out of the box would drive me crazy, great vid though bro keep them rolling 👍🇨🇦🤙
Thanks, brother. This one has been a non stop issues for me. I hope I have it figured out. Thanks for watching
Fusion is a game changer. Will need to shave the scale motor down to fit.
Ya I have a couple 1800kv just sitting and waiting. Going to give the Stock one more chance
Good find. At least not a broken part.
Ya hopping that solve the clicking
Make tuning adjustments on your servo cable pulls. Should be good to go.
Every thing should be good now that i deleted the model in the radio and started fresh
Glad ya got her figured out fingers crossed 🤞🏻
Here's to Hopping, thanks for watching and commenting 👍
breaks everrytime...crazy
Ya sure hope I have it figured out now
Be interesting to find out what that click is
I think is was the pinion slipping, we will find out the next time I trail it.
Nice looking rig my friend, definitely digging the blue. Great place to do some crawling 💯👍🏻👊🏻 see ya around the youtube streets.
Thanks 👍
Outstanding dude, sure appreciate the video. I’ll be watching for the next one it sure looks great out there doing its thing, well until the next time peace and chicken grease😄👋👋👍👍😎
Thanks Andy much appreciate you stopping by and watching and commenting
Yeah, RC heaven for sure. Love that Rocky area Super cool👍👍😎
Ya its a really awesome stop, i do want to venture further and see if i can find more rocky areas maybe closer to the river.
Yeah, only the first scratch hurts, the rest is just patina😄👍👍
Ya if you ain,t scrathing it your not really driving it or having fun
Wow, what a beautiful place👍👍
Yup sure is not bad for the bald ass Prairies of western Canada
Wow, that was an excellent save👍👍
Thanks Brother
Yeah, that was awesome dude, nice climb, love that nice and slow and controlled crawl👍👍
Ya i like to show what the truck can do not just rip it everywhere, watching the truck move and do it things is my Fav part of it all
Awesome love that paint job looking sweet, here watching 6:43 PM Thursday, July 11👍👍
Thanks 👍
Great crawl and really dig the colours you picked, looks awesome, be safe out there
Thanks, the zull with the Fusion SE 1800KV is one hell of a capable rig. Enjoyed driving it, thanks for watching and commenting the support is appreciated.
Awesome. I was just there last week… didn’t walk far enough down the trail tho… but I will be out there. Thanks sir👍🏼🇨🇦😎
Just follow the mountain bike trails through the coulee and you have all the terrain needed for an enjoyable run. Just keep eyes open for Rattlers
sweet video, made me sub goodjob.❤❤❤
Thanks for the sub and stopping by to check out my channel your support is appreciated and valued, subbed you back👊
@@radioactivescalerc thank you man
Where about sis this? I’m in Medicine Hat. Would be thankful. Tia.👍🏼🇨🇦😎
Awesome another Medicine Hat Hobbiest, this location is secret 😂😂just kidding that is the coulee at the Red Cliff River Valley Park, great trailing and crawling location goes on for hours of trailing and crawlers. Thanks for watching and commenting
On that ground it won't make it up there.. there's no way. I've tried HOLDS, I've tried other top tires and they just don't work in the dirt. Only way is tones of weight up front, lowered and overdrive. I find matching the inserts to the weight makes a huge difference. I'm opposite, soft in the rear with dual stage foams, med outer up front as the front is 70%.
The Gatekeeper with Patagonia's almost got it last year just dug in to much at the edge of that ledge, the Megalithics are awesome but you are right the rig needs to be heavier. Next time I take out the SCX6 Honcho I will give it a try. Thanks for watching and commenting 👍
I did a toyota body in camo green and it looks wicked. My next colour is Nato Brown.
Nice, I like the Military colors also, I guess that because I Canadian Miltary for over 33 years, I like the nato brown I have a few Rattle cans of it and think I will use it on the next RC4WD build with the Toyota Extra Cab Body. Thanks for watching and commenting, the support is appreciated 👊
Those are solid upgrades & will make that Zuul really perform. 👍
Great little rig, so capable out of the box, the fusion SE is an awesome motor, I will be using it in other rigs forsure, I have 2 on the shelf both 1800kv waiting to be used. Thanks for watching and commenting 👍
I like how you actually crawl your crawler . Unlike most of the other channels through four S in them and just punch it through.👍🏼👍🏼👍🏼👍🏼👍🏼
Thanks Bro much appreciated, i like to try and capture the rig doing its thing, i am not the best and getting good video but i have fun doing it and just like to share my time on the trail.
hey man, what kind of mount are you using on your osmo?
I 3D printed a support system to attach to the Rugged radio, works great, I been meaning to upload a video on my filming setup. I will try to get that done soon. Thanks for watching and commenting 👍
@@radioactivescalerc Yes sir!! Id like to see that video whenever you make it lol!
@@mjcfliI will try this week if I get the time
i have the ifs2 version, its a blast too
Thinking about picking one up also or at least the IFS for the one I have. Thanks for watching and commenting 👍
Love it! I got the scratch n sniff blue with ifs2 running 1.9 ogrc aluminum and carbon deep dish wheels with 4.19 j concept landmines. Its a beast went everywhere my ecto on 4.75 j concepts went.
I like the platform forsure, how do you rate the IFS version? Thinking about grabbing one or atleast the IFS. Thanks for watching and commenting 👍
Love the custom paint job. That Bright Gun Metal is one of my favorites of theirs. You got it looking much more like an FJ with that black top accent. Looks smooth as butter climbing too! Fusion!!!
Thanks bro, sweet little rig, like how the paint turned out too, much better then the tan. The Fusion is awesome going to be using it in alot more of the rigs, might try the 1200kv version also. Thanks for watching and commenting 👍 👊
Nice 👍🏾
Cheers!!!
Great video best looking Zuul I’ve seen cool paint job, I agree the tan doesn’t do it, I do like the blue with scratch and wear
Thanks, the blue version on the IFS Verson is a nice color. Thanks for watching and commenting
I like the tan of the RTR Zuul, but that gunmetal looks SO good on such a detailed shell, the the gloss black really sets it off! 🍻
The tan is ok I guess, but I am one of those who does not like to keep stock bodies unless I really like the color and paint job. Thanks for watching and commenting as always.
Looks good Duane!
Thanks Josh great little rig
Nice climbing Radio!!! Some seriously sweet lines out in that place. I dont think youve made it out to the far end where the black path starts to turn towards the river. Some kewl lil coulee's back in there that go to the top, very fun stuff, really narrow too, adds an awesome feel to running the rig in there.
Thanks Durp, I have not gone that far yet, sounds like I need to trail deeper towards the river. Gotta make sure I take the right rig and extra batteries sounds like a long trail to get that far. I park at the trail head on the way down to the river park so that would be a long hike.
@@radioactivescalerc Nah its not that far Radio, maybe like another 100meters or two, or think of it like around another 2 cliffs/coulees on the bike path. Once u get past that open area it kinda has narrow coulees that lead up and some are just awesome and one has an old car in it, to hard to bike but a RC should make it. Went there with my dad about 3 years ago with the Defender, was fun as heck :)
I will have to make the extra hike next time out, will need to make sure I have extra batteries in the pack just incase I venture deeper in to it and find some killer lines. Especially if I take one of the SCX6's.
Oh! and ....Real trucks have scratches! 😅
Yes they sure do
Wow! Really like that truck! And what a great crawl spot! You really got some amazing shots there! NICE work Great video! Still think you need some snake guards 😂 Baby biters have no rattles to warn! ✌🏻😎
Thanks Donna it's an awesome place to play so many different challenges and trailing all in one spot, just gotta watch out for Rattle Snakes