I like your style. Thanks for sharing... I have an idea but need to know a few things ..how long do these led last at their lowest active voltage?
@chantianseng Жыл бұрын
Tks for your affirmation. unfortunately i have not tested the leds' electrical performance at their threshold voltage.
@monujaiswal2258 Жыл бұрын
I have one question how much price it takes in India , or would u sell lcd and battery if it is less costly there ??
@Brad14221 Жыл бұрын
Have your try 1000F? It last longer.
@GO-su3lf Жыл бұрын
Bro TS, today i tried 6 x 360F in series, brand GW price RM21 each, can start but after few minutes voltage has drop below 12V from 13.90V. Yes, Bezza alternator output max at 13.9V when no battery connect to it. Now 2 possibilities, either my Bezza sucking too much while the car is off, or the capacity too small. But if Bezza really suck a lot of juice while off, then will waste money too if i buy Maxwell 500F costing RM380.
@GO-su3lf Жыл бұрын
6 x 360F in series gives about 60F but only last for like 15 minutes for the voltage to drop from 13.9V to 11.4V. So Maxwell is 10x bigger but what the use if 15 minutes x 10 only last for like 3 hours. I just need it to last for at least a good 24hrs coz i start my car everyday at the same time to go to work.
@chantianseng Жыл бұрын
@@GO-su3lf how much current does ur Bezza suck during key-off state? we can purchase the higher capacitance supercap to counteract the standby drawing current, else, u can make an external main switch to disconnect the power everytime you off the car.
@chantianseng Жыл бұрын
can watch this video.. this is how i upgrade the system kzread.info/dash/bejne/aX2nkpaGh9XJZqg.html
@Maximillioneddy2011 Жыл бұрын
Sudah dua tahun masih ok ke?
@chantianseng Жыл бұрын
tested boleh pakai lagi.. kalau lama tak start kereta saya just off switch tu.. charge stored dalam tu tak kurang banyak, boleh start kereta lagi kalau switch ON..
@chantianseng Жыл бұрын
kzread.info/dash/bejne/aX2nkpaGh9XJZqg.html
@tcaudiomute Жыл бұрын
beli kat mana bro ?
@chantianseng Жыл бұрын
taobao, china
@Brad14221 Жыл бұрын
Shopee Ada jual
@itsvallennicole742 Жыл бұрын
my ipad air 3 has the same problem but when i press on the back it goes back to normal the a few minutes it glitch again , what does that mean ? the hardware components are out of place ?
@chantianseng Жыл бұрын
if this is not due to the LCD module malfunction, then probably u just need to dismantle the lcd panel, unplug and reattach the LCD connector again.
@lupoaie74522 жыл бұрын
Wow,this thing is very,very,very slow...and worst than i7 with 4 core.It's as fast as a dual core i3.It's disappointing.Thanks i will not buy or recommend this thing.
@eroskyu2 жыл бұрын
Same experience, good thing there is a refund button on shopee
@gianana85592 жыл бұрын
Hi! im choosing between this rapoo 9000m or the logitech k380..what do u think should i buy?
@chantianseng2 жыл бұрын
I choose Rapoo 9000m is solely due to its price is much lower than logitech. however, i m using e9000m now so far no issue..
@filipbudzynski3760 Жыл бұрын
if you havent bought yet, logitech seem pretty tempting, however im switching to rapoo due to the size of logitech which is a little bit but noticably smaller which is uncomfortable after a 5-6 hours usage
@destinyenglishhub999 ай бұрын
I've used Logitech keyboard for two years and even I carried it in my bag pack. It worked fine. Logitech is better. Rapoo is new and unexprienced
@legendrikc34662 жыл бұрын
I want to fix it but i dont know😢
@legendrikc34662 жыл бұрын
My ipad also like you
@ObibaJ2 жыл бұрын
Same problem. Its such a disappointment. Such a nice design and this problem makes it unusable
@chantianseng2 жыл бұрын
u may try use hair dryer to heat it up. comment from Zsófia Nádai mentioned that it might be due to water droplets issue. i hv tried it, its work!
@TitiProsopel2 жыл бұрын
Schematic
@Brad142212 жыл бұрын
Why no put a small 12v solar. To keep the energy top up? During day. If you plan to go batteries less. This going to save your $$ From buying battery.
@chantianseng2 жыл бұрын
good idea! actually need +-15.5v solar cell. the alternator need to change to 15V too to increase the juice
@mohdothman58242 жыл бұрын
Saya baca meter kedai loopbsy punya meter rumah saya,mcm mana pulse saya pergi kedai
@mohdothman58242 жыл бұрын
Satu kedai lagi,motosikal pun ada bawa itu barang
@chantianseng2 жыл бұрын
idea baik tu.
@mohdothman58242 жыл бұрын
BR EX ada itu barang
@navinstylo21002 жыл бұрын
Bro can use led light RGB multi color proton iswara meter box can use ?
@chantianseng2 жыл бұрын
sure. i use white LED bcz of for clarity purpose only.
@wantedagent46212 жыл бұрын
same problem
@tejaswini_242 жыл бұрын
How much will this whole process cost? does it depend from shop to shop or... approx.. how much can it take.... because i gave this for fixing.. it costed abt 100$
@chantianseng2 жыл бұрын
the lcd and battery cost me about MYR150.
@chantianseng2 жыл бұрын
if u hv no hot air gun, use hair blower will do also.
@laifamily5112 жыл бұрын
@@chantianseng Do you mind to share the link of lcd to me? I'm from Malaysia, thanks.
@chantianseng2 жыл бұрын
@@laifamily511 i got it last time from lazada. now the LCD price is up and about RM170 - RM200
@chantianseng2 жыл бұрын
@@laifamily511 i couldn't find back the original link due to it is no longer valid.
@wengsiongsai28152 жыл бұрын
Battery langsong xde?brp Ari tahan?
@chantianseng2 жыл бұрын
good question. no battery. normally i will disconnect the super cap when i dnt use car. if the super cap connect to a standard kancil 660 without terminal disconnection, it can withstand for >24hours without a single charge (depend on car's idle current usage*)... for my car, it still can crank the engine after next day. i think if use it in the fuel injection car, it will be more suitable. easier to start.
@wengsiongsai28152 жыл бұрын
@@chantianseng thanks.i just place order this afternoon a cheeper 1brand gdcph to assist battery when start engine..
@unkertech2 жыл бұрын
@@chantianseng you should pair it with a small size 12v sealed battery (like those 12v 7ah battery used for UPS). This should keep the caps in charge for much much longer when car it shut off.
@chantianseng2 жыл бұрын
@@unkertech u got the point. however, i m trying to avoid to use any chemical battery so that the car is battery maintenance free.
@unkertech2 жыл бұрын
@@chantianseng if you have more budget, get lifepo4 which does not really have any chemical issues. Cause without a battery to keep the charge up, there are lots of work to deal with keeping the charge sufficient to crank the car. Anyway it is good information and helped me a lot when I do my experiment with supercapacitors. Thanks!
@mc.leonielgaila95803 жыл бұрын
Hello. Just a question, is it really necessary to replace the LCD if it has that horizontal lines or is there a way that we could just replce a specific part/s in the LCD to fix the problem. Thank you for your answer.
@chantianseng3 жыл бұрын
Dear Indio, sometimes just the lcd ribbon cable attachment problem. u may verify the root cause first via disconnect the lcd ribbon cable then reconnect back. but make sure u disconnect the battery connector first b4 u do it. u may refer to this video to see how i did it b4 i decide to change the lcd screen: kzread.info/dash/bejne/qGyJq6hwndXQnrQ.html
@mc.leonielgaila95803 жыл бұрын
@@chantianseng Thank you so much. I will try it based on the video.
@xx3868 Жыл бұрын
It is ONLY a hardware issue not software ect and lines ect are almost always the LCD BUT you can lift battery connector, (always!!) Then disconnect LCD and check its alignment or corrosion and spray electric cleaner then put back straight and then battery connector and still lcd lines ect, then replace LCD, as a repairer i have spare LCD i use just to test socket and if Good picture, then i know its the bad LCD for sure. Same with touch screen, thats usually the chips on the M/B so i use a test touch for that too and if still not working, its not the customer touch but the M/B Those touch screens can be all cracked and still work at least on most of the screen unless you damage the part nearest the connector where the signals come out.
@prof89573 жыл бұрын
Exactly the same issue with my ipad mini 2! Restoring and updating did not work means it is not software issue but LCD problem. But you should have tried first to disconnect then reconnect the LCD cable and see if the problem will be solved!
@chantianseng3 жыл бұрын
I hv tried it before and found that not the connector issue. u may watch the video here. kzread.info/dash/bejne/qGyJq6hwndXQnrQ.html
@ShahrezanSickander3 жыл бұрын
good one.. sesuai untuk keta saya.. dah order, tak sampai lagi untuk kancil turbo i
@MochiFrapucino3 жыл бұрын
My lcd is doping the sake thing but im dumb and i dong know how tO fix it im scared that Thio Worldport make My LCD even worse
@chantianseng3 жыл бұрын
if so, u may try send for service. else, it is nice to explore it by ur own slowly. no hurry.
Пікірлер
This is absolutely beautiful and stunning. Beautiful song so glad this song was introduced into my life
🧡🧡
古人有家国情怀,以马革裹尸为荣。 我亦慕之。
❤❤❤❤❤
Sweet song Beautiful opera...
Meu Deus que coisa mais linda, Tan Jing tem uma voz muito poderosa, obrigado por postar, nunca achei essa performance
Muy buena voz
😊
เพลงนี้คุ้นหูมาก ค่ะ เพราะมากการแสดงสุดอลังการ 🥰🥰🥰
网宇八杆央团杜万联四案央洲世联东一统一三八案全球一体化政策 祝虎将3. 8节日快乐
我不知道那是什么,但我听它,因为它很好。
高音及古風唱法令人陶醉
Vokal yg bagus...
Just wow❤️❤️❤️
好❤
美しい❤
好好好🎉🎉🎉
台上几分钟,台下十年功!
原话是一分钟😂
好棒演出🎉🎉🎉
超屌!
Quelle voix. C est super.
Beautiful performance 💖
素晴らしい
I'm facing the same issue in the same keyboard
I like your style. Thanks for sharing... I have an idea but need to know a few things ..how long do these led last at their lowest active voltage?
Tks for your affirmation. unfortunately i have not tested the leds' electrical performance at their threshold voltage.
I have one question how much price it takes in India , or would u sell lcd and battery if it is less costly there ??
Have your try 1000F? It last longer.
Bro TS, today i tried 6 x 360F in series, brand GW price RM21 each, can start but after few minutes voltage has drop below 12V from 13.90V. Yes, Bezza alternator output max at 13.9V when no battery connect to it. Now 2 possibilities, either my Bezza sucking too much while the car is off, or the capacity too small. But if Bezza really suck a lot of juice while off, then will waste money too if i buy Maxwell 500F costing RM380.
6 x 360F in series gives about 60F but only last for like 15 minutes for the voltage to drop from 13.9V to 11.4V. So Maxwell is 10x bigger but what the use if 15 minutes x 10 only last for like 3 hours. I just need it to last for at least a good 24hrs coz i start my car everyday at the same time to go to work.
@@GO-su3lf how much current does ur Bezza suck during key-off state? we can purchase the higher capacitance supercap to counteract the standby drawing current, else, u can make an external main switch to disconnect the power everytime you off the car.
can watch this video.. this is how i upgrade the system kzread.info/dash/bejne/aX2nkpaGh9XJZqg.html
Sudah dua tahun masih ok ke?
tested boleh pakai lagi.. kalau lama tak start kereta saya just off switch tu.. charge stored dalam tu tak kurang banyak, boleh start kereta lagi kalau switch ON..
kzread.info/dash/bejne/aX2nkpaGh9XJZqg.html
beli kat mana bro ?
taobao, china
Shopee Ada jual
my ipad air 3 has the same problem but when i press on the back it goes back to normal the a few minutes it glitch again , what does that mean ? the hardware components are out of place ?
if this is not due to the LCD module malfunction, then probably u just need to dismantle the lcd panel, unplug and reattach the LCD connector again.
Wow,this thing is very,very,very slow...and worst than i7 with 4 core.It's as fast as a dual core i3.It's disappointing.Thanks i will not buy or recommend this thing.
Same experience, good thing there is a refund button on shopee
Hi! im choosing between this rapoo 9000m or the logitech k380..what do u think should i buy?
I choose Rapoo 9000m is solely due to its price is much lower than logitech. however, i m using e9000m now so far no issue..
if you havent bought yet, logitech seem pretty tempting, however im switching to rapoo due to the size of logitech which is a little bit but noticably smaller which is uncomfortable after a 5-6 hours usage
I've used Logitech keyboard for two years and even I carried it in my bag pack. It worked fine. Logitech is better. Rapoo is new and unexprienced
I want to fix it but i dont know😢
My ipad also like you
Same problem. Its such a disappointment. Such a nice design and this problem makes it unusable
u may try use hair dryer to heat it up. comment from Zsófia Nádai mentioned that it might be due to water droplets issue. i hv tried it, its work!
Schematic
Why no put a small 12v solar. To keep the energy top up? During day. If you plan to go batteries less. This going to save your $$ From buying battery.
good idea! actually need +-15.5v solar cell. the alternator need to change to 15V too to increase the juice
Saya baca meter kedai loopbsy punya meter rumah saya,mcm mana pulse saya pergi kedai
Satu kedai lagi,motosikal pun ada bawa itu barang
idea baik tu.
BR EX ada itu barang
Bro can use led light RGB multi color proton iswara meter box can use ?
sure. i use white LED bcz of for clarity purpose only.
same problem
How much will this whole process cost? does it depend from shop to shop or... approx.. how much can it take.... because i gave this for fixing.. it costed abt 100$
the lcd and battery cost me about MYR150.
if u hv no hot air gun, use hair blower will do also.
@@chantianseng Do you mind to share the link of lcd to me? I'm from Malaysia, thanks.
@@laifamily511 i got it last time from lazada. now the LCD price is up and about RM170 - RM200
@@laifamily511 i couldn't find back the original link due to it is no longer valid.
Battery langsong xde?brp Ari tahan?
good question. no battery. normally i will disconnect the super cap when i dnt use car. if the super cap connect to a standard kancil 660 without terminal disconnection, it can withstand for >24hours without a single charge (depend on car's idle current usage*)... for my car, it still can crank the engine after next day. i think if use it in the fuel injection car, it will be more suitable. easier to start.
@@chantianseng thanks.i just place order this afternoon a cheeper 1brand gdcph to assist battery when start engine..
@@chantianseng you should pair it with a small size 12v sealed battery (like those 12v 7ah battery used for UPS). This should keep the caps in charge for much much longer when car it shut off.
@@unkertech u got the point. however, i m trying to avoid to use any chemical battery so that the car is battery maintenance free.
@@chantianseng if you have more budget, get lifepo4 which does not really have any chemical issues. Cause without a battery to keep the charge up, there are lots of work to deal with keeping the charge sufficient to crank the car. Anyway it is good information and helped me a lot when I do my experiment with supercapacitors. Thanks!
Hello. Just a question, is it really necessary to replace the LCD if it has that horizontal lines or is there a way that we could just replce a specific part/s in the LCD to fix the problem. Thank you for your answer.
Dear Indio, sometimes just the lcd ribbon cable attachment problem. u may verify the root cause first via disconnect the lcd ribbon cable then reconnect back. but make sure u disconnect the battery connector first b4 u do it. u may refer to this video to see how i did it b4 i decide to change the lcd screen: kzread.info/dash/bejne/qGyJq6hwndXQnrQ.html
@@chantianseng Thank you so much. I will try it based on the video.
It is ONLY a hardware issue not software ect and lines ect are almost always the LCD BUT you can lift battery connector, (always!!) Then disconnect LCD and check its alignment or corrosion and spray electric cleaner then put back straight and then battery connector and still lcd lines ect, then replace LCD, as a repairer i have spare LCD i use just to test socket and if Good picture, then i know its the bad LCD for sure. Same with touch screen, thats usually the chips on the M/B so i use a test touch for that too and if still not working, its not the customer touch but the M/B Those touch screens can be all cracked and still work at least on most of the screen unless you damage the part nearest the connector where the signals come out.
Exactly the same issue with my ipad mini 2! Restoring and updating did not work means it is not software issue but LCD problem. But you should have tried first to disconnect then reconnect the LCD cable and see if the problem will be solved!
I hv tried it before and found that not the connector issue. u may watch the video here. kzread.info/dash/bejne/qGyJq6hwndXQnrQ.html
good one.. sesuai untuk keta saya.. dah order, tak sampai lagi untuk kancil turbo i
My lcd is doping the sake thing but im dumb and i dong know how tO fix it im scared that Thio Worldport make My LCD even worse
if so, u may try send for service. else, it is nice to explore it by ur own slowly. no hurry.