Пікірлер

• 
  @ybrik593722 сағат бұрын

  No need to apply touch-up paint of the exposed cross-section of the metal after drilling?

• 
  @flako4u7712 сағат бұрын

  You can if you want to, but the spoiler come with plastic seals water is not gonna be issue.

• 
  @ybrik593711 сағат бұрын

  @@flako4u77 I bought an Civic Si spoiler to be installed on Civic Sport. Only issue I have is that it didn't come with paper templates. The Honda parts tech where I bought this said the guys at service department may have that on the Civic's repair shop manual for download.

• 
  @flako4u779 сағат бұрын

  @@ybrik5937 you don’t really need the paper. What you can do put a sponge where the clips and bolts go and add little be of paint on the sponge where you see the marks of the paint on the care is where you need to make the holes 🕳️ just align the wing the way you want it before you drill easy bro

• 
  @ybrik593722 сағат бұрын

  Great installation vid! So those two threaded screws doesn't require a nut and it's just supposed to be pushed in?

• 
  @flako4u7710 сағат бұрын

  Yes you still have to add the nuts to really secure the wing

• 
  @Manuel3525mКүн бұрын

  I say don’t change it my tacoma 375k miles not going to change it

• 
  @graysonfamilykennel521111 күн бұрын

  What kind of rotors and where can I find them?

• 
  @nosinththela181221 күн бұрын

  How to do first prewash without water it's a new machine

• 
  @dapna24 күн бұрын

  Esa muerda no funciona

• 
  @joelsantos799126 күн бұрын

  sick ass foo. B)

• 
  @rodney97327 күн бұрын

  I did step by step and changed both knock sensor and alternator THIS THE BEST VIDEO Thanks man 🫡

• 
  @moisesjasso322629 күн бұрын

  Can you do the same thing in Tacoma 2022?

• 
  @dbolzleАй бұрын

  how the fuck did your negative battery terminal just lift off like that? i loosened the nut and it still wont budge.

• 
  @karimali2380Ай бұрын

  Excellent way of thinking brother 😁 thats right

• 
  @jerongrayson16Ай бұрын

  I didn’t know it was that easy would’ve been replaced mines

• 
  @พรสวรรค์-ฏ2ตАй бұрын

  Thanks for your help 😃

• 
  @Good-Morning-MediaАй бұрын

  What did you use for the front pads

• 
  @angsumasaidee927Ай бұрын

  Thank you, sir! Your video was the most detailed and helpful one I found. Helped me changed the radiator on my 1999 Toyota Camry. Many thanks!

• 
  @shesomadelineАй бұрын

  Awesome tutorial!!! Thank you!!

• 
  @user-ws9jj6ts3sАй бұрын

  Very informative and simple job done. Thanks

• 
  @mariomata9177Ай бұрын

  How many quarter I need to fill up??

• 
  @nordicpride9708Ай бұрын

  You don’t need to ever replace a Toyota metal mesh screen transmission filter unless you are overhauling the transmission . I really fail to understand why so many KZreadrs do this. Look at what AISIN recommends. Also the bolts are coated with loctite from the factory and typically break when removed. Ask me how I know as I’ve worked on hundreds of these. Absolutely ZERO reason to remove the transmission pan unless you are having valve body issues PERIOD!

• 
  @JayBee-rr7co2 ай бұрын

  Genius!

• 
  @dumitrumalcoci78732 ай бұрын

  Great video! It probably wouldn't be a bad idea to replace the PVC valve as well since you are there.

• 
  @LaceyFrahm2 ай бұрын

  Thank you I was panicking so much

• 
  @jefeshain20682 ай бұрын

  that damn air duct had me fucked up bro

• 
  @Michael-yv4uh2 ай бұрын

  Nice job sir, I will doing this next week.

• 
  @chriscastellanos39852 ай бұрын

  😮 no brake grease ANYWHERE!!????😮

• 
  @pinatabloom97322 ай бұрын

  Legend

• 
  @JessicaCooley-ln1fn3 ай бұрын

  Ugh 2024 had this issue today thanks problem solved

• 
  @13634landing3 ай бұрын

  Great video!! Thanks!!🍻

• 
  @nikiboss40833 ай бұрын

  Alles falsch so darft man nicht muss mit Diagnose zürick nicht auf Hand

• 
  @craigmines2553 ай бұрын

  What a good video to show how to put on brakes because of you I'll be rich I save money now on breaks thank you😂

• 
  @logannguyen54933 ай бұрын

  Did you have to disconnect the battery?

• 
  @Cable122 ай бұрын

  Yes, it is recommended to disconnect the ground from the battery.

• 
  @email16v3 ай бұрын

  I recommend you follow the manufacturer's recommendations and not from someone on KZread.

• 
  @SUMANSHARMA-nu1gn3 ай бұрын

  Thank you. You are a saviour.

• 
  @fredzhang74983 ай бұрын

  Thank you for the great video. It helped me solve the problem.👍

• 
  @dustinkirkham10103 ай бұрын

  Good refresher video, just for anyone watching in the future id suggest taking out both pins to clean and put fresh grease on them to mitigate the potential for noise in the future.

• 
  @anthonygalvan56173 ай бұрын

  Kinda nervous im trying this tomorrw after my mechanic diagnosed it with starter failure..... Seems pretty doable since i work in remodeling.....only thing im a bit scared of is damaging any cables or plugs....wish me luck 😁😁🤝

• 
  @JoeWill2313 ай бұрын

  Thank you!!

• 
  @buttmuffins41783 ай бұрын

  Was about as easy as I thought it would be, thanks for the video! ✌

• 
  @noey57663 ай бұрын

  Thanks for sharing! For the oil in the spark plug tube #1, you might have to remove that spark plug tube wiith a pipe wrench, seal the threads and re-install. The oil seepage into that tube is not coming from the seals at the top of the valve cover. Good luck, and thanks again for videoing this procedure. I need to do the same work and seeing someone else attempt it is always good.

• 
  @RicNplayz3 ай бұрын

  no one likes to do mickey mouse

• 
  @hasanalash10853 ай бұрын

  Hahaha u know how to do it homie!! 😂 this guys funny and he knows his shit!! Good video bro thank you

• 
  @pixelcultmedia42523 ай бұрын

  Thanks so much for this method. The other method of pulling it up and to the right, sounds like a spacial headache. Right now I'm just stopped by all of the hoses that don't want to budge. So I'm waiting on hose pliers to come in before I continue.

• 
  @pixelcultmedia42523 ай бұрын

  Finally got the job done. I honestly thought I had an extra bolt left over before I realized that the new Starter came with its own bolt. Once I realized that, I was able to calm down and put it all back together. The hardest part of the job was that stupid little hose underneath the manifold. Re-connecting it is a hassle because you can only fit one finger down there at a time. So you're basically flicking the hose until it catches on the nipple, and then dragging your finger along the hose to pressure it back onto the nipple.

• 
  @ThanhNguyen-ns5xx3 ай бұрын

  Great video, thank you so much!

• 
  @user-kf8ry8qr9h4 ай бұрын

  when you pushed the piston back with the screw driver. Wont that screw driver scratch or hurt the rotor? i also would have silicone lubed up some areas when everything was off, but great video... thanks

• 
  @franklinrosario51634 ай бұрын

  Thank you brother. Great toturial on how to remove the CL code on this type of model. I appreciate it.

• 
  @drswife84584 ай бұрын

  You’re too much lol the encouragement you give while cursing me out is hysterical. My mechanic wants to charge me $427 to change one solenoid. He said he need 1.5 hrs for labor. My dad said they can do it in 30 mins. I guess when you don’t know what you’re doing it takes long?

• 
  @flako4u774 ай бұрын

  Mechanics never charge for their time, mechanics charge for their knowledge. If a mechanic charges $427 for one solenoid tell him to change all for the same price because he will do all the work for that particular solenoid anyways

• 
  @robertphillips86484 ай бұрын

  Thank you sir from a single, clueless male.

• 
  @valionaidenov98674 ай бұрын

  Hello!!!! Аз съм професионален механик, знам колко е трудно това което свърши!!!! Свърши чудесна работа! Поздрави и да се наслаждавате на хубавия автомобил!!!! От България!!!!!

• 
  @chuchoelroto13184 ай бұрын

  Orale. Seems like an easy job. I'm glad that I'm finally changing mine. Now, I know a lot more mechanics and have more tools. I'm more confident in doing mechanical work. Gracias por el video.

• 
  @brianmeehan51744 ай бұрын

  WHAT ARE THE SIZES OF BOTH THOSE DRILL BITS?

• 
  @flako4u774 ай бұрын

  The last one was 11/32 drill bit the first one you can use any small size bit