"Life is a big do-it-yourself project - let’s see how far it can get you"
My name is Daniel and I am an Electronics Engineer. This channel is for DIY passionates who really like home made and creative projects.
Even if I love to work with Electronics and make cool and awesome gadgets, I also love dealing with all kinds of technical challenges just around my life
and at one point I thought it could be great to "ShareNiceThings" with you guys. Tech is my passion. I create random project tutorial videos.
It makes me happy to see my videos encouraging or helping you in any way. I hope you enjoy my content.
⭐⭐⭐
For more interesting DIY projects
check my page at:
www.share-nice-things.com
⭐⭐⭐
If you want to have a look at my tools and supplies I use:
www.share-nice-things.com/tools-i-use/
⭐⭐⭐
Пікірлер
Hello, what about getting a small/cheap aliexpress bms board that fits and solder it to the battery contacts and connect it to the incoming current. No need to have this external charger everytime. Or what a about a set up with resistors connected to the incoming current, you only need like 4 volts Regards
Whats easy about this,?????🙄
No way will I pay for or do that shit to get a crap makita to work. Makita is garbage
What is the name of wire connector? I don't have a solder iron
In Which store I can get this fuse in USA?
Is that puse always need to replace?
This was s copied from another guys video. The first battery you opened has the more advanced BCU board and the load balancers are already connected to the yellow port. No need to open and solder on. Also some BCU have a chip onboard that will lock out the charging capabillity so a new board is necessary. Chio is Renesas NEC and encrypted dump.
Tried to download plans for this and paypal wont work
This is what I am looking for Thank You for sharing
You know they make miter saws for stuff like this!!!
Jump start your drill batteries
I won't be buying Makita stuff anymore. They have become a total rip off
Works great if you pay attention to instructions. kzread.infoUgkxviiltW7NlHbp_VL_bLbIkbLAvILVhnia For those that complain about "mushy" or "wet" rice I suspect they are using the included cup to measure rice (which is really only 3/4 cup) and then putting in water using a separate measuring cup that is a full cup. This results in too much water and you will get mushy or wet rice and think it is not done. Just use the included cup for both rice and water, or your own measuring cup for rice and water according to your package directions. It will come out fine. I've used mine for years for brown and white rice. If your machine is bubbling white froth out of the steam vent then it means you should have rinsed your brand of rice first to remove some of the starch. Sheesh. Makes me wonder how people can cook well enough to feed themselves.
Excelente producto
You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice kzread.infoUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.
I need ur contect pls
How do get u
I think I’ll but a new battery 😢
can you run dado on it
Thanks. I have use your instructions.
My rice cooker turns on but it switches off too early and the rice is still soaking wet is this maybe a failing resettable fuse? or a different issue?
At that point just buy a new one
Is 18V Makita charger can charge an 8 or 12 ohms battery?
Friend - Congratulations on the video - My MAKITA DC18RA charger burst components and I don't know the code to buy - They are the IC PWM with 4 pins on one side and 3 pins on the other position IC-1 - And the other one is likely a transistor in position IC -4 which is close to the (smaller) TR2 transformer -------- IT WILL HELP A LOT TO KNOW THE CODES OF THESE TWO COMPONENTS SO THAT I CAN REPAIR THE CHARGER - I appreciate your attention - Thank you
My husband used these plans from Woodglut and he is very pleased.
Very helpful tutorial. Thank you for sharing. At 2:50 you test the fuse. How is it done? setting on the meter and what the reading should be if fuse is good? Thank you again!
If the fuse is burned out, it should read like no connection (mine did). If it's working fine, it should read like almost zero resistance/just a piece of wire.
Mine turns on but refuses to go into cooking mode.
try and put some water in the pot, then it works once there some pressure on it ☺️
Same issue
My new rice cooker won’t switch on .i,ll try more water .
Screw this
the good thing with these being cheaply made, is that they are very similar in construction and have similar weak points. Danke man!
Nice work but i think i just buy a new one :)
I just fixed mine, thank you so much for the guide!
На дорогой инструмент деньги есть, а на торцовку нет. 😅
Durante mucho tiempo, no podia conectar algunos equipos por bluetooth. hasta que leí el manual... hay que emparejarlo desde el control remoto y mantener apretada la tecla de bluetooth, hasta que aparezca "pairing" y ahi empieza a buscar. Se puede conectar "todo", notebook, tablets, moviles de distinta calidad, etc. asi que solo es paciencia. Solo admite un emparejamiento por vez, para emparejar algo, hay que desemparejar el anterior.
Merci grâce à toi j’ai pu me connecté sur Bluetooth
Great video ,I’ve taken away the riving lade off is this ok ?
Top
Just came across this - My friend you have solved my problem with this - also how to make a very easy rail-square!
Aha !
Any ideas why my charger stays solid green but my battery is flat and it doesn't charge??
What if i conected direct without fuse
The next time the rice cooker would encounter the same problem, you'd set your house on fire. The fuse is there for a reason.
@@Haja024 yea, to buy more rice cookers when the fuse blows.
I wired mine direct.... no problem if you cook your rice..... and then unplug it when done...DO NOT LEAVE IT UNATTENDED I live in a foreign country....I got the thermal fuses but no information on amps etc.... and installing one not straight forward... I need insulated butt crimps too.
Didn’t solve how to continue using the charger?
thank you so much i ordered new fuse, i think i have same problem so will update when i switch out the fuse.
Thanks for the video. QUESTION: how to change 240V rice cooker to 120V? Better yet, is there a way to change the 240v rice cooker to a car?
It doesn't have wheels so cannot change to car sorry
I reflowed the whole underside of board and then fiddled with the yellow wired connectors. Possible shitty connection there. I can't say for sure what part exactly was the problem but... It came good. Now accepts batteries and plays the crappy tune.
How am I meant to use a Makita battery tool to fix my broken makita battery when I only have one battery?? AND THAT ONE IS BROKEN if you didn't know that already.
the worst video. I'm watching a video so that I can listen and watch not read the fckn subtitles and try to guess where the next sentence will pop up
Thank you bro 🙏
Bardzo dobra robota.
Sledgehammer to crack nut
Me also "success" :) Thanks a lot! ( Environment thanks you too)
Great project mate, you can also flash mount a build to the card and get rid of the usb. I made a portable version and mounted the card inside a mini super Nintendo case with hdmi out. Gets a good reaction at party’s.