had some serious power issues getting those wheels to start turning. was struggling to gain rpm. maybe the parking brake is on
@chunkiermango79827 ай бұрын
Ima need to have a talk with my LM7 that rufuses to spin at 177k
@brettlang36787 ай бұрын
Might just be strong ass rear brakes, or something is really wrong with it lol
@chunkiermango79827 ай бұрын
@@brettlang3678 I have rear disks
@TTGTO28810 ай бұрын
The part that you don't see, is that after this burn out, it needed a new trans, turbo and engine ...
@brettlang367810 ай бұрын
nope, bought new in 2014, own it still with 136k miles, still one of my 3 daily drivers, original engine, turbo, and trans, maintenance goes a long way lol
@TTGTO28810 ай бұрын
@brettlang3678 You got lucky, the Cruze is one of the biggest turds GM ever produced.
@brettlang367810 ай бұрын
@BadAss454LSX 100% they are usually junk lol, I've been pretty lucky this far with mine, in fact I trust my cammed 03 silverado more than this 2014 cruze 🤣
@RichPrivilegedWhiteMale10 ай бұрын
Any mods?
@RICHYSUNCLE Жыл бұрын
Mmm
@RallyRolla18 Жыл бұрын
Can I get some help here so I got a 1.4 manual on wet road I drop the clutch at like 6 grand and it clunks then starts spinning but barely and I have to keep my foot on the floor or it starts clunking again
@RichPrivilegedWhiteMale10 ай бұрын
😂😂😂
@TTGTO28810 ай бұрын
Turn off the traction control, dummy.
@isaacjlw Жыл бұрын
In the end while he’s driving away it sounds like a turkey 😂
@jamezrulez21 Жыл бұрын
1.4l ?
@brettlang3678 Жыл бұрын
Yes
@andrewmaddog6031 Жыл бұрын
How do you do the burnouts? write in detail. i have tried and it didnt do nothing
@KnorrAquatics Жыл бұрын
Dump the clutch high in rpm with the hand brake on😂😂 shift into second and drop the brake
@thelonewrangler1008 Жыл бұрын
Try harder
@RichPrivilegedWhiteMale10 ай бұрын
Traction control off. Abs fuse removed if you can locate it. That may be what youre missing. Hold that traction button till you take off esc and stabilitrac
@TTGTO28810 ай бұрын
If you don't know, you shouldn't be doing it, idiot.
@shawncarpenter834 Жыл бұрын
I got the same truck
@NRXTM2 жыл бұрын
Why does mine shift to 2nd even in first.
@somespeedbikefreak92442 жыл бұрын
I had my 60E Built by a local trans shop, close to KC, also ended up deciding to throw a stock LS9 Cam in the truck. I got brakechecked hard, ended up pulling it apart, it ended up being a full driveline rebuild since I had the cash to spend... 400WHP, I'll post a video when its done.
@tmi17672 жыл бұрын
Drop more content of the truck
@samholdsworth4202 жыл бұрын
Will this pass California smog emissions? 🤡
@brettlang36782 жыл бұрын
It'll fail with flying colors, preferably these colors though 🇺🇸
@wat65922 жыл бұрын
slideways
@Drroyal-kz2xk2 жыл бұрын
That was sick
@Jacob_Ramm2 жыл бұрын
Cool!!gotta love a sbc
@thedude24672 жыл бұрын
Thumbs down 👎 5 second ad before a 14 second fuckin video. Didn't even watch the fuckin thing. Thank KZread for that!!!
@brettlang36782 жыл бұрын
And that's my fault how?
@sleeklunitick7382 жыл бұрын
Rest easy my guy
@joshqualls7042 жыл бұрын
Knowing when to get out of it is a lost skill these days nice burn out
@waynetessier30582 жыл бұрын
Good looking and sounding truck, 94 Sonoma ext. cab here, 399ci stroker 18* pump gas street truck.
@MrWonkawonka2 жыл бұрын
Having fun
@MrWonkawonka2 жыл бұрын
Sounds lazy
@MrWonkawonka2 жыл бұрын
Nice. Engine is making some hp and tq
@brettlang36782 жыл бұрын
That engine is still in that car, 434 built by cropper racing engines, its a bad smallblock
@MrWonkawonka2 жыл бұрын
Sounds kind of lazy.
@georgewilkinson9272 жыл бұрын
This video made my day LOL.
@kevmon42732 жыл бұрын
Cheesy
@minibikescraper67432 жыл бұрын
Stop sign. Squeal tires on Pavement.
@miltonthompson54732 жыл бұрын
Like the s10 but honestly the square bodies are my favorite
@brettfavre18752 жыл бұрын
U can tell truck doesn't have much power shouldn't need brake to do a burnout with a v8 light truck....
@brettlang36782 жыл бұрын
Well thats pretty obvious. Its a 50 year old engine with smog heads. I got 3k in this whole truck and i just do burnouts with it.
@jordanperry31262 жыл бұрын
This is interesting
@thatcarguy07102 жыл бұрын
nice. my grandpa has a 350 swapped square body Sonoma with a nice set of American Racing AR23 wheels and turquoise body
@logantimberman35532 жыл бұрын
I got the same thing but with my 91 ranger. Do u know if it's the Windsor or modified?
@dominicgee21112 жыл бұрын
@@logantimberman3553 a 350 is a SBC Windsor and Modified are SBF variants I believe
@logantimberman35532 жыл бұрын
@@dominicgee2111 not asking bout thw video lol
@thatcarguy07102 жыл бұрын
@@logantimberman3553 not sure
@scottyagodich73192 жыл бұрын
BAD ASS 😀
@brettlang36782 жыл бұрын
Thanks man!
@borderex99932 жыл бұрын
sick little truck!
@robertholiday10462 жыл бұрын
It needs some rest it will get better maybe some NyQuil
@sheltonbogarage95802 жыл бұрын
HELL YEAH ,I Ls swapped my 1992 s10.
@terryburnett7972 жыл бұрын
Lmao you scared of it. Why you let off the go pedal homie? 🤣
@brettlang36782 жыл бұрын
It was kinda runnin like shit, timing was too retarded, it was boggin down, trust me i usually dont let off it 🤣
@terryburnett7972 жыл бұрын
@@brettlang3678 lol. I love a S10 with a V8 man.
@infamousnova2 жыл бұрын
Heck yeah
@niklasacuna41932 жыл бұрын
Front tire fire
@eliteproductions8352 жыл бұрын
Hell yeah brother
@eliteproductions8352 жыл бұрын
🤟🏻🤟🏻
@tommccarthy72272 жыл бұрын
🏆🏁🏆
@yoboijd41752 жыл бұрын
Bro was boutta give Charles that dog💀
@foxwithshades70802 жыл бұрын
What V8 is in it? 350?
@brettlang36782 жыл бұрын
Yeah a 3970014 block, 2 bolt main from a 1970 elcamino, pretty much stock other than a cam, intake, roller rockers, and headers
@crimsonlight42052 жыл бұрын
@@brettlang3678 so then almost not stock at all lol
@brettlang36782 жыл бұрын
@@crimsonlight4205 eh horsepower is in your heads and valve train, its got stock cast smog heads and its still a flat tappet cam, and its never been rebuilt so its a 50 year old longblock with a little blowby, it runs decent for what it is though!
@crimsonlight42052 жыл бұрын
@@brettlang3678 oh for sure, any 350 will pull that s10 like it’s not even there, never understood why Chevy and Ford didn’t put v8s in their small trucks like dodge did but it’s a lot of fun. I was just saying if you change your heads then it’d be a full bolt on 350 lol I miss my s10
@sheeznutz22542 жыл бұрын
@@brettlang3678 well then it ain't pretty much stock
@woodychuck97382 жыл бұрын
FOR DALE🤠🤠🤠
@Ari-13-Ana2 жыл бұрын
I don't know who Charles is, but I hope he rests in peace. Great way to remember someone.
@julianwester99782 жыл бұрын
Thought he hit the dog
@BroncosFan3032 жыл бұрын
Was the swap hard?
@brettlang36782 жыл бұрын
Not too bad, distributor is tight to the firewall, and had to change the crossmember for the th400 trans, did a fuel cell in the bed with a mechanical fuel pump on the engine, with an HEI distributor, very simple set up
@JonnySonder2 жыл бұрын
This was beautiful on so many levels
@peppertrysmcfry9442 жыл бұрын
Almost smoked the dog
@codmobile_bot47352 жыл бұрын
I do this for my uncle every time I pass his grave
Пікірлер
had some serious power issues getting those wheels to start turning. was struggling to gain rpm. maybe the parking brake is on
Ima need to have a talk with my LM7 that rufuses to spin at 177k
Might just be strong ass rear brakes, or something is really wrong with it lol
@@brettlang3678 I have rear disks
The part that you don't see, is that after this burn out, it needed a new trans, turbo and engine ...
nope, bought new in 2014, own it still with 136k miles, still one of my 3 daily drivers, original engine, turbo, and trans, maintenance goes a long way lol
@brettlang3678 You got lucky, the Cruze is one of the biggest turds GM ever produced.
@BadAss454LSX 100% they are usually junk lol, I've been pretty lucky this far with mine, in fact I trust my cammed 03 silverado more than this 2014 cruze 🤣
Any mods?
Mmm
Can I get some help here so I got a 1.4 manual on wet road I drop the clutch at like 6 grand and it clunks then starts spinning but barely and I have to keep my foot on the floor or it starts clunking again
😂😂😂
Turn off the traction control, dummy.
In the end while he’s driving away it sounds like a turkey 😂
1.4l ?
Yes
How do you do the burnouts? write in detail. i have tried and it didnt do nothing
Dump the clutch high in rpm with the hand brake on😂😂 shift into second and drop the brake
Try harder
Traction control off. Abs fuse removed if you can locate it. That may be what youre missing. Hold that traction button till you take off esc and stabilitrac
If you don't know, you shouldn't be doing it, idiot.
I got the same truck
Why does mine shift to 2nd even in first.
I had my 60E Built by a local trans shop, close to KC, also ended up deciding to throw a stock LS9 Cam in the truck. I got brakechecked hard, ended up pulling it apart, it ended up being a full driveline rebuild since I had the cash to spend... 400WHP, I'll post a video when its done.
Drop more content of the truck
Will this pass California smog emissions? 🤡
It'll fail with flying colors, preferably these colors though 🇺🇸
slideways
That was sick
Cool!!gotta love a sbc
Thumbs down 👎 5 second ad before a 14 second fuckin video. Didn't even watch the fuckin thing. Thank KZread for that!!!
And that's my fault how?
Rest easy my guy
Knowing when to get out of it is a lost skill these days nice burn out
Good looking and sounding truck, 94 Sonoma ext. cab here, 399ci stroker 18* pump gas street truck.
Having fun
Sounds lazy
Nice. Engine is making some hp and tq
That engine is still in that car, 434 built by cropper racing engines, its a bad smallblock
Sounds kind of lazy.
This video made my day LOL.
Cheesy
Stop sign. Squeal tires on Pavement.
Like the s10 but honestly the square bodies are my favorite
U can tell truck doesn't have much power shouldn't need brake to do a burnout with a v8 light truck....
Well thats pretty obvious. Its a 50 year old engine with smog heads. I got 3k in this whole truck and i just do burnouts with it.
This is interesting
nice. my grandpa has a 350 swapped square body Sonoma with a nice set of American Racing AR23 wheels and turquoise body
I got the same thing but with my 91 ranger. Do u know if it's the Windsor or modified?
@@logantimberman3553 a 350 is a SBC Windsor and Modified are SBF variants I believe
@@dominicgee2111 not asking bout thw video lol
@@logantimberman3553 not sure
BAD ASS 😀
Thanks man!
sick little truck!
It needs some rest it will get better maybe some NyQuil
HELL YEAH ,I Ls swapped my 1992 s10.
Lmao you scared of it. Why you let off the go pedal homie? 🤣
It was kinda runnin like shit, timing was too retarded, it was boggin down, trust me i usually dont let off it 🤣
@@brettlang3678 lol. I love a S10 with a V8 man.
Heck yeah
Front tire fire
Hell yeah brother
🤟🏻🤟🏻
🏆🏁🏆
Bro was boutta give Charles that dog💀
What V8 is in it? 350?
Yeah a 3970014 block, 2 bolt main from a 1970 elcamino, pretty much stock other than a cam, intake, roller rockers, and headers
@@brettlang3678 so then almost not stock at all lol
@@crimsonlight4205 eh horsepower is in your heads and valve train, its got stock cast smog heads and its still a flat tappet cam, and its never been rebuilt so its a 50 year old longblock with a little blowby, it runs decent for what it is though!
@@brettlang3678 oh for sure, any 350 will pull that s10 like it’s not even there, never understood why Chevy and Ford didn’t put v8s in their small trucks like dodge did but it’s a lot of fun. I was just saying if you change your heads then it’d be a full bolt on 350 lol I miss my s10
@@brettlang3678 well then it ain't pretty much stock
FOR DALE🤠🤠🤠
I don't know who Charles is, but I hope he rests in peace. Great way to remember someone.
Thought he hit the dog
Was the swap hard?
Not too bad, distributor is tight to the firewall, and had to change the crossmember for the th400 trans, did a fuel cell in the bed with a mechanical fuel pump on the engine, with an HEI distributor, very simple set up
This was beautiful on so many levels
Almost smoked the dog
I do this for my uncle every time I pass his grave