I really enjoy seeing other brands like kioti stepping into the heavy equipment market. Off subject, have you had any check engines light pop up on the HD CHEVY? If so, what did you do to resolve them?
@chrisward40512 күн бұрын
As far as the chevy goes I had a sensor go bad for the DPF and around the same time the sensor for the coolant bottle went bad. That's been about 2 years ago. Total bill for the DPF sensor and a new coolant bottle at the dealership was $1,400 I believe. Other than that I haven't had any issues with the truck. It's doing great
@jakesanders351710 күн бұрын
@@chrisward405 thanks for the information sir. I just got a 2024 5500 service truck and my first time on a long road trip it through a engine light but didn’t skip a beat. I later found out other trucks in the fleet through DEF codes but dealership couldn’t figure it out.
@michelfitzgerald359912 күн бұрын
Absolutely love my 750 and I don’t baby it. I’ve operated several different brands as an Equipment Operator in my daily work
@ZACZPA14 күн бұрын
Stop putting your hand in front of the camera
@billcaudill598514 күн бұрын
I’d like to know what the sticker shows for GVWR Most people tow more than they should and it’s not that the vehicle isn’t capable. It’s what it’s rated for. Great looking truck and a great set up You cannot I just saw another video that a dealer Caller showed about how to speck out that type of truck so you can haul and tow
@tman893917 күн бұрын
in other words cheap Chinese junk. I have bought some of these products and they are disposable crap.
@Tcw201917 күн бұрын
How much did the kioti roughly run you without tax? I’m looking at getting a skid next year
@chrisward40517 күн бұрын
65k
@Tcw201917 күн бұрын
@@chrisward405 wow that’s way cheaper than the rest of
@chrisward40517 күн бұрын
@Tcw2019 agreed. The warranty is better than the other name brands as well. With the kioti you get a 3 year 3,000 hour warranty. Cat, new Holland, deere, ect is 2 year 2,000 hour warranty
@mp-xt2rg18 күн бұрын
I'll looking at that thing makes me appreciate how easy Bobcats are to work on. I feel bad for new Holland owners. That thing doesn't seem to bad but definitely way less accessible than my bobcat. On mine you open the door and can get to everything without removing any bolts.
@louskunt979817 күн бұрын
Why don’t you like your Bobcat? They’re certainly not the best skid steer (not even by a long shot) but I don’t think they’re as bad as you’re making it out to be.
@ajakarr18 күн бұрын
Pook needs a spot
@graysondaniels834718 күн бұрын
Hey where is the other new toy
@chrisward40518 күн бұрын
It'll be in a near future video
@Footmanconcrete19 күн бұрын
I’m from Florida I’ve never seen a Koti skid. Just sub compact tractors. Good looking unit
@chrisward40519 күн бұрын
It works great
@2020HotShotTruckingLLC19 күн бұрын
Final assembly is often done at dealerships and that's likely the weak link. I'm sure you will have it bulletproofed by time you need it again. I have a 3 PT bush hog and it's the cheap square body style - so it's a real PITA to use in tight spots around trees. It will cut any tree my tractor can bend over and turns t-posts into pretzels. Just not good for in the woods. That's where your brush cutter would excel. And you can groom edges of thick brush up high like you did in this video. Another plus for your enclosed skid steer: You will see the yellow jackets attacking before they get you... my tractor simply cannot outrun the angry buggers! Lol
@northeasterndirtandpropert797420 күн бұрын
WOW,they listened and went to the roll up door!Great Move!!
@chrisward40520 күн бұрын
Agreed
@mcallisteroutdoors.840321 күн бұрын
Power rake will come in standard flow too and works great. Nice looking machine.
My Apple Watch has a bigger screen than that back up camera. 😮
@ScottSteinbeck23 күн бұрын
The front of the dealer in the thumb nail looked very familiar I’m 30 min from there
@brian93ist23 күн бұрын
Cheap i paid 1600 for mine it has the front wheel weights
@dankruger289023 күн бұрын
the only thing that stops me from liking this machine is the emission canister. Bobcat-Wacker-Cat don't have the burn off canister from 25 to 75hp machines.
@floridagunrat16256 күн бұрын
I thought 75hp and under didn't require re-gen?
@chrisward4056 күн бұрын
@floridagunrat1625 the under 75 hp still has a DPF. This is on all makes. It does not take DEF. DEF is required over the 75 hp threshold and also has DPF
@floridagunrat16256 күн бұрын
@@chrisward405 10-4, thanks!
@bladenrexroth255524 күн бұрын
Good to see you again brother.
@graysondaniels834724 күн бұрын
He Chris all you need now is a bigger excavator and be good and toys for your skider
@chrisward40524 күн бұрын
Something else will be in the next video lol
@2020HotShotTruckingLLC24 күн бұрын
Nice addition Chris! How's your 7.3 doing?
@chrisward40524 күн бұрын
@2020HotShotTrucking the ol 7.3 is alive and well. She's not leaving me any time soon
@SouthGeorgiaHotShot24 күн бұрын
Let me borrow that thing
@chrisward40524 күн бұрын
Hahahaahhahaha come get it.
@2020HotShotTruckingLLC24 күн бұрын
If you're needing it to evict the neighbor who complained... borrow the dozer instead. No AC, but the job will be done fast enough you won't need it!
@graysondaniels834724 күн бұрын
Agreed
@natek7183Ай бұрын
Helped me so much thank you bro
@user-qo3fe7yy1kАй бұрын
what is the shipper's number?
@jamesflowers4508Ай бұрын
I had a 22 Penske box truck with 20 sandbags and 5 pallets of material with a trailer with a skidster in the back. I was curious about my weight. And was 26,629. So over weight by 629 pounds. Could I get arrested for the extra weight?
@chrisward405Ай бұрын
You wouldn't get arrested. Depending on the officer, they would either let you go with a warning, give you an over weight ticket, or make you park the truck and get a CDL driver to finish the trip. More than likely they would give you a warning because it's not that much over the 26k mark
@w0wnoothernames2 ай бұрын
I finally took apart my gator, had a no start issue. Had fuel, spark still no start. Pulled timing cover off and my belt was toast. Thanks man
@TheUltimate652 ай бұрын
International 7.3 run agin...😊
@martinw94252 ай бұрын
The music was really good, and the vid. Bummer, good luck to find a new bloc.
@leethomas5562 ай бұрын
It's not that the truck isn't physically capable, it's the combined max weight between the truck and trailer that is legally limiting. Even if you're under weight, it's the potential.
@tigertank81912 ай бұрын
What brand drill?
@mikewalters19802 ай бұрын
I'd like to see you're drill setup system for different types of seed.
@Mr.frag-out2 ай бұрын
what's the max weight on a trailer you can legally tow with that truck? thank you. do you need a cdl for that rig?
@chrisward4052 ай бұрын
For the truck no CDL needed. The truck itself weighs 11,500 lbs. The last I checked you can spec these trucks to be 37k lbs combined weight
@Mr.frag-out2 ай бұрын
it's too bad the gcwr sucks on those trucks I'd love to have one to tow an excavator.
@juhanipaloaho2 ай бұрын
Thank you for the video dude 👍
@chrisward4052 ай бұрын
No problem 👍
@timgile81443 ай бұрын
You can test stator and regulator with an Ohm Meter so you don't have to replace what is good.
@MRrteak993 ай бұрын
How'd you haul without a plate?
@chrisward4053 ай бұрын
What do you mean without a plate??
@chrisward4053 ай бұрын
It was "in tow"
@StarknightMT_official3 ай бұрын
Hello, Are you interested in testing our products? We would like to invite you to test the Cargo Storage Box for your 2018 polaris ranger 900xp
@chrisward4053 ай бұрын
@StarknightMT_official I would be interested
@StarknightMT_official3 ай бұрын
@@chrisward405 Hi, thank you for your kind reply. may I know your contact info?
@StarknightMT_official3 ай бұрын
@@chrisward405 Hii, thank you for your kind reply, may I know your contact info?
@StarknightMT_official3 ай бұрын
@@chrisward405 hi, thank you. please share your info for more details
@chrisward4053 ай бұрын
@StarknightMT_official phone number is 740-207-7105
@KenFullman3 ай бұрын
The first thing I'd do with that nice new coupler would be to use it to make a mould. Then cast another out of aluminium.
@chrisward4053 ай бұрын
They actually used the same style in the D4 dozers and sense upgraded to aluminum. I asked while is was at cat if there was an upgrade and they told me no. Aluminum would be a lot better for sure.
@Mad.Man.Marine3 ай бұрын
I’m surprised someone isn’t making them. Not hard to do especially if you have a cnc lathe or mill
@chrisward4053 ай бұрын
@Mad.Man.Marine agreed.
@rafidishak78013 ай бұрын
This video shows what a small business operatorsgo through on a every day and what they have to deal with without any support from the outside world. Basicaly they are on their own.make it throughout the day or get out of business..people only look at the pay checks but they dont know what goes behind the scene...well done mate and good luck with your mini terex .I hope it is something not major. Thanks for your efforts to make this video possible.
@chrisward4053 ай бұрын
Solenoid was bad on the terex. Appreciate you watching the video
@2020HotShotTruckingLLC3 ай бұрын
I see you aren't afraid to jump in with both feet! Got plans for April 8th yet? I'm delivering a load in Groveport Friday morning and hope to find a load that will leave me near the middle of the 100% zone in Indiana or Ohio. Had a load lined up going just south of Indianapolis the 7th, but couldn't book it and it's gone now.
@chrisward4053 ай бұрын
Hopefully working on making them dollar dollar bills on the 8th lol
@2020HotShotTruckingLLC3 ай бұрын
@@chrisward405 Me too, but if I can see a 100% eclipse I will. Saw 98% in Atlanta about 5-6 years ago and it was pretty cool. If the weather looks bad I'll just find a good paying load going to Georgia. I've been OTR just about 5 weeks.
@tyyoung85663 ай бұрын
I just bought a 2022 5500 LT CrewCab. My friend has one that has been tuned with upgraded intakes and turbo. dynoed at 560HP / 1150 TQ. Towed my 41’ ATC car hauler no problems
@mjackson9326883 ай бұрын
Do you have to remove timing belt to do water pump?
@chrisward4053 ай бұрын
Yes
@bryandixon424 ай бұрын
How do you get paid from the BOL to send to the factoring company? How do they know the price if it’s not on the BOL?
@chrisward4054 ай бұрын
The price of payment will be on your rate confirmation. You send your rate confirmation with the BOL to the factoring company and that is how you get paid
@fergieferguson24574 ай бұрын
Have you tried no till with your new drill?
@chrisward4054 ай бұрын
Not yet
@fergieferguson24574 ай бұрын
I’m in the market for no till drill!I seen that one at rural king for 995$ but idk if you could actually no till with it because of weight or would it cut clay soil.vs paying 4-8G
@chrisward4054 ай бұрын
@fergieferguson2457 it is pretty light weight. I don't think it's heavy enough for no till
@FF57544 ай бұрын
Great video!!! I came across your video as I looked at the Silverado 5500 regular cab 4x4 diesel. Very cool set up. I have a bumper pull forest river micro lite 25 foot travel trailer and a kubota x900 side by side. Looking to do this as well. I like the idea about crew cab for more storage. I was looking at the CM or a Knapheide pgnb bed for my build. I thought these trucks could tow and haul too but seeing is believing. Really like the red too, was thinking white again but its just plain like a work truck.
@chrisward4054 ай бұрын
I've had the truck loaded at 32,600 pounds and had no problems towing
Пікірлер
You still wanting to sale the old 7.3
Lol I'd cry watching it leave the driveway. I still drive it on occasions. It's not for sale at this time
@@chrisward405 i Shouldve bought it a year ago when i had the chance
KIOTI had to buy mine back after 8 days. Massive pile of trash. WORST CUSTOMER SERVICE IVE EVER EXPERIENCED!
Wow sorry to here that. What was the issues you were having??
@@chrisward405 kzread.infoapZMWQkDtOQ?si=G_Zd8n0j5gvRdrx0
Yup, I'd like to know what was wrong with it?
It looks exactly like a Kubota
Not really when you get close to them.
Lost me at “kioti engine “
I really enjoy seeing other brands like kioti stepping into the heavy equipment market. Off subject, have you had any check engines light pop up on the HD CHEVY? If so, what did you do to resolve them?
As far as the chevy goes I had a sensor go bad for the DPF and around the same time the sensor for the coolant bottle went bad. That's been about 2 years ago. Total bill for the DPF sensor and a new coolant bottle at the dealership was $1,400 I believe. Other than that I haven't had any issues with the truck. It's doing great
@@chrisward405 thanks for the information sir. I just got a 2024 5500 service truck and my first time on a long road trip it through a engine light but didn’t skip a beat. I later found out other trucks in the fleet through DEF codes but dealership couldn’t figure it out.
Absolutely love my 750 and I don’t baby it. I’ve operated several different brands as an Equipment Operator in my daily work
Stop putting your hand in front of the camera
I’d like to know what the sticker shows for GVWR Most people tow more than they should and it’s not that the vehicle isn’t capable. It’s what it’s rated for. Great looking truck and a great set up You cannot I just saw another video that a dealer Caller showed about how to speck out that type of truck so you can haul and tow
in other words cheap Chinese junk. I have bought some of these products and they are disposable crap.
How much did the kioti roughly run you without tax? I’m looking at getting a skid next year
65k
@@chrisward405 wow that’s way cheaper than the rest of
@Tcw2019 agreed. The warranty is better than the other name brands as well. With the kioti you get a 3 year 3,000 hour warranty. Cat, new Holland, deere, ect is 2 year 2,000 hour warranty
I'll looking at that thing makes me appreciate how easy Bobcats are to work on. I feel bad for new Holland owners. That thing doesn't seem to bad but definitely way less accessible than my bobcat. On mine you open the door and can get to everything without removing any bolts.
Why don’t you like your Bobcat? They’re certainly not the best skid steer (not even by a long shot) but I don’t think they’re as bad as you’re making it out to be.
Pook needs a spot
Hey where is the other new toy
It'll be in a near future video
I’m from Florida I’ve never seen a Koti skid. Just sub compact tractors. Good looking unit
It works great
Final assembly is often done at dealerships and that's likely the weak link. I'm sure you will have it bulletproofed by time you need it again. I have a 3 PT bush hog and it's the cheap square body style - so it's a real PITA to use in tight spots around trees. It will cut any tree my tractor can bend over and turns t-posts into pretzels. Just not good for in the woods. That's where your brush cutter would excel. And you can groom edges of thick brush up high like you did in this video. Another plus for your enclosed skid steer: You will see the yellow jackets attacking before they get you... my tractor simply cannot outrun the angry buggers! Lol
WOW,they listened and went to the roll up door!Great Move!!
Agreed
Power rake will come in standard flow too and works great. Nice looking machine.
kzread.info/dash/bejne/Zp-AptN8m9qenrQ.htmlsi=_NA4vQmbfwAx6ZwP
My Apple Watch has a bigger screen than that back up camera. 😮
The front of the dealer in the thumb nail looked very familiar I’m 30 min from there
Cheap i paid 1600 for mine it has the front wheel weights
the only thing that stops me from liking this machine is the emission canister. Bobcat-Wacker-Cat don't have the burn off canister from 25 to 75hp machines.
I thought 75hp and under didn't require re-gen?
@floridagunrat1625 the under 75 hp still has a DPF. This is on all makes. It does not take DEF. DEF is required over the 75 hp threshold and also has DPF
@@chrisward405 10-4, thanks!
Good to see you again brother.
He Chris all you need now is a bigger excavator and be good and toys for your skider
Something else will be in the next video lol
Nice addition Chris! How's your 7.3 doing?
@2020HotShotTrucking the ol 7.3 is alive and well. She's not leaving me any time soon
Let me borrow that thing
Hahahaahhahaha come get it.
If you're needing it to evict the neighbor who complained... borrow the dozer instead. No AC, but the job will be done fast enough you won't need it!
Agreed
Helped me so much thank you bro
what is the shipper's number?
I had a 22 Penske box truck with 20 sandbags and 5 pallets of material with a trailer with a skidster in the back. I was curious about my weight. And was 26,629. So over weight by 629 pounds. Could I get arrested for the extra weight?
You wouldn't get arrested. Depending on the officer, they would either let you go with a warning, give you an over weight ticket, or make you park the truck and get a CDL driver to finish the trip. More than likely they would give you a warning because it's not that much over the 26k mark
I finally took apart my gator, had a no start issue. Had fuel, spark still no start. Pulled timing cover off and my belt was toast. Thanks man
International 7.3 run agin...😊
The music was really good, and the vid. Bummer, good luck to find a new bloc.
It's not that the truck isn't physically capable, it's the combined max weight between the truck and trailer that is legally limiting. Even if you're under weight, it's the potential.
What brand drill?
I'd like to see you're drill setup system for different types of seed.
what's the max weight on a trailer you can legally tow with that truck? thank you. do you need a cdl for that rig?
For the truck no CDL needed. The truck itself weighs 11,500 lbs. The last I checked you can spec these trucks to be 37k lbs combined weight
it's too bad the gcwr sucks on those trucks I'd love to have one to tow an excavator.
Thank you for the video dude 👍
No problem 👍
You can test stator and regulator with an Ohm Meter so you don't have to replace what is good.
How'd you haul without a plate?
What do you mean without a plate??
It was "in tow"
Hello, Are you interested in testing our products? We would like to invite you to test the Cargo Storage Box for your 2018 polaris ranger 900xp
@StarknightMT_official I would be interested
@@chrisward405 Hi, thank you for your kind reply. may I know your contact info?
@@chrisward405 Hii, thank you for your kind reply, may I know your contact info?
@@chrisward405 hi, thank you. please share your info for more details
@StarknightMT_official phone number is 740-207-7105
The first thing I'd do with that nice new coupler would be to use it to make a mould. Then cast another out of aluminium.
They actually used the same style in the D4 dozers and sense upgraded to aluminum. I asked while is was at cat if there was an upgrade and they told me no. Aluminum would be a lot better for sure.
I’m surprised someone isn’t making them. Not hard to do especially if you have a cnc lathe or mill
@Mad.Man.Marine agreed.
This video shows what a small business operatorsgo through on a every day and what they have to deal with without any support from the outside world. Basicaly they are on their own.make it throughout the day or get out of business..people only look at the pay checks but they dont know what goes behind the scene...well done mate and good luck with your mini terex .I hope it is something not major. Thanks for your efforts to make this video possible.
Solenoid was bad on the terex. Appreciate you watching the video
I see you aren't afraid to jump in with both feet! Got plans for April 8th yet? I'm delivering a load in Groveport Friday morning and hope to find a load that will leave me near the middle of the 100% zone in Indiana or Ohio. Had a load lined up going just south of Indianapolis the 7th, but couldn't book it and it's gone now.
Hopefully working on making them dollar dollar bills on the 8th lol
@@chrisward405 Me too, but if I can see a 100% eclipse I will. Saw 98% in Atlanta about 5-6 years ago and it was pretty cool. If the weather looks bad I'll just find a good paying load going to Georgia. I've been OTR just about 5 weeks.
I just bought a 2022 5500 LT CrewCab. My friend has one that has been tuned with upgraded intakes and turbo. dynoed at 560HP / 1150 TQ. Towed my 41’ ATC car hauler no problems
Do you have to remove timing belt to do water pump?
Yes
How do you get paid from the BOL to send to the factoring company? How do they know the price if it’s not on the BOL?
The price of payment will be on your rate confirmation. You send your rate confirmation with the BOL to the factoring company and that is how you get paid
Have you tried no till with your new drill?
Not yet
I’m in the market for no till drill!I seen that one at rural king for 995$ but idk if you could actually no till with it because of weight or would it cut clay soil.vs paying 4-8G
@fergieferguson2457 it is pretty light weight. I don't think it's heavy enough for no till
Great video!!! I came across your video as I looked at the Silverado 5500 regular cab 4x4 diesel. Very cool set up. I have a bumper pull forest river micro lite 25 foot travel trailer and a kubota x900 side by side. Looking to do this as well. I like the idea about crew cab for more storage. I was looking at the CM or a Knapheide pgnb bed for my build. I thought these trucks could tow and haul too but seeing is believing. Really like the red too, was thinking white again but its just plain like a work truck.
I've had the truck loaded at 32,600 pounds and had no problems towing
Subscribed from New Jersey