Very helpful thank you...just the lip smacking. Ughhhh
@Pro_2A_17766 сағат бұрын
I prefer the gap. It keeps the light switches out of the trigger guard. Just a personal preference.
@1ModernDayDad2 сағат бұрын
That’s a great point. Hadn’t thought about that for the gap before!
@75shadystorm5 күн бұрын
Do you think this is a better option than the 10in and oil needed saw? I probably have more trees than you to cut and wondering how it fair against oak hard wood 🤔. Great video!
@1ModernDayDad4 күн бұрын
Oo. Fair question. I really like the oil free option just for maintenance sake. I was cutting an older tree obviously. Not sure on oak, but it really cut just fine. If you’re fine with the oiling I’d go with the 10”. But for me the oil free option cut strong enough. I cut another tree at my work (not sure what type) but that was thicker and cut it pretty good too. Just can’t have the branches be too thick since it’s only 8”. 🤷🏼
@TriniChiniese5 күн бұрын
Got mine today , the TLR 7 X USB .
@oescolante156 күн бұрын
I just bought one today for $11.99 I couldn't resist 😅
@1ModernDayDad6 күн бұрын
That’s a killer deal. Honestly a great tool to keep handy.
@misterbear92119 күн бұрын
Dude, pay the extra money to get your slide milled to fit the 507k. Holosun has been in the game for a long time and they are fantastic optics. I got mine done by C&H Precision and I'll never look back.
@1ModernDayDad9 күн бұрын
Oh nice. How much was that to get done?
@machinebeard163911 күн бұрын
TTI -Taran Turd Infection...
@TriniChiniese12 күн бұрын
Just got mine today , thanks for your videos. I am doing a similar build looking at your holster video now ,also question he Hellcat pro there is a rattle noise what looks to be the firing pin moving as the gun is slide back is that normal ?
@1ModernDayDad12 күн бұрын
Mine has that same rattle and I think it’s the firing pin. If I remember correctly that’s only if the trigger is released. So you can cock, but not chamber a round and that solves it. Or obviously chamber a round and that sets the firing pin in place.
@LateNightJams18 күн бұрын
That seems really useful. Thanks for reviewing this.
@loucatmeow1318 күн бұрын
Just curious did you private sell to someone or back to a dealer wondering what you got for it
@1ModernDayDad18 күн бұрын
$950
@shadykadie8 күн бұрын
@@loucatmeow13 Oooh he’s not tellin 😊
@copdoc19 күн бұрын
I pulled the striker and cleaned everything completely and now have put about 500 rounds through with no problems
@1ModernDayDad18 күн бұрын
Nice. Glad a thorough cleaning did the trick for you!
@chandlor22 күн бұрын
Got my TTI a few weeks ago and have put 700 rds in it. It has a 3-4% failure to feed rate so I contacted Canik and are sending me a spring that they created to fix this widespread problem. I love the TTI and hopefully their new high performance recoil spring works!
@1ModernDayDad22 күн бұрын
Wow. That’s crazy high. Curious what’s new in the recoil spring. Hopefully that solves it! I’m a fan of Canik overall, just not this one.
@chandlor22 күн бұрын
@@1ModernDayDad Regarding the high performance recoil spring theyre sending, they said its ideal for use with certain high-power loads, or in situations where a high weight recoil spring is needed. The one it came with is supposed to be for 115 and 124 grain which is what i was shooting but we’ll see
@deusvult663223 күн бұрын
I've heard that a lot of guys are selling their TTI Combat because of an epidemic of soft hands in society.
@shadykadie8 күн бұрын
I like the grip texture… hands not gonna slip while shooting
@johnfinnigan618223 күн бұрын
100000% agree with all of this. I traded for a new SFX rival s
@1ModernDayDad23 күн бұрын
I’ve felt that one a few times at the store and it feels sooo much better! The steel is a huge upgrade.
@RC-iq4kf23 күн бұрын
Great video! Just installed mine with your guidance. Very crispy 👌🏽
@1ModernDayDad23 күн бұрын
Love to hear it. Happy training!
@G-_Money25 күн бұрын
I have the old style set and I have sheared grade 8 bolts with the 1/4in set. I have had amazing results in durability of the 3/8ths and 1/2in set.
@1ModernDayDad4 күн бұрын
That’s great to hear. It’s a great brand so far for me!
@selma623326 күн бұрын
I definitely relate to the sand paper fixed it with combat tape feels amazing now and the recoil is nice also appreciate the second spring
@xi-deadshot-ix583826 күн бұрын
I need to find someone with an SSA-E I can try out. I got the SSA-X for my “house gun” because I wanted a duty grade trigger that wasn’t too light. Got it installed and it’s way lighter than I thought it would be, which I found isn’t a bad thing. The wall is really well defined so I’m not worried about ND’ing like I thought I would be with such a light trigger. I saw the ~4lb pull weight and didn’t realize each stage was ~2lbs 😂. I’m curious how it would feel a pound lighter though. May get the enhanced version for one of my other AR’s.
@binqilinbinqilinbinqilin26 күн бұрын
This helped thx!
@Victor-tc3de29 күн бұрын
Thanks. Mine didn't come with the lube for some reason. From Brownell.
@TheUltraMagaDawg2 сағат бұрын
I bought mine from PSA and it didn’t come with lube or the slave pin. It came in a plastic bag with a PSA sticker on it with the part number. Emailed PSA about it, they sent me an rma to return it, no explanation. Then called Geissele and they said they quit putting the lube in with the triggers a few months back. They sent me a couple packs of lube and 2 slave pins.
@NewYears197829 күн бұрын
I did one of these recently but then realized the retractable is pointless. Once you park there is no reason it needs to be retracted. The only reason to retract it is when you move the cars out and want to work in the garage. This is fine if you are working in garage with the door closed but if you want to open it, the ball will drop. So I undid the work I had just done (retractable ball) and instead put fish eye hooks on a out of the way spot of my work bench. My ball stays down all the time unless I want it out of the way, then I manually pull a carabiner clip down to another fish eye which raises both balls (wife's car and my car has one) up to freely work in garage. The retractable idea is really cool it's just not really serving any purpose. I recommend the manual version when you can actually move the balls out of the way when you need to work in garage. This solves all the issues (like kids playing with it, them in the way when door is open while working in garage or doing yard work etc.
@1ModernDayDad28 күн бұрын
That’s a clever design. What I like about the retractable is it tells me if the garage door is up or down. Obviously I could look in the mirror, but we’ve had a few times where it stopped 80% up and the ball would tell us that, but my limited view in the mirror shows the garage is fully open.
@NewYears197828 күн бұрын
@@1ModernDayDad Makes sense! I think the retractable is cool for sure! Didn't mean to like be negative toward it that was more more for me as when I did it I realized it was pointless for me haha. But I didn't think about the garage open close thing but we always look in our mirror or camera plus the car will beep like mad (newer cars) if you put it in reverse when the door is closed. Great video none the less!
@Primordial_CitizenАй бұрын
Is the spacer necessary?
@1ModernDayDadАй бұрын
Only if it rattles a little bit. I put mine in. Shook it and it seemed to rattle a touch. So I put it in and that solved it.
@carlosandresh__26 күн бұрын
@@1ModernDayDad mine still makes a slight noise with spacer… is that bad ?
@RascalCatifyАй бұрын
Short and too the point, great vid! This is the next addition to my AR, I assume its much quieter than the cheese grater mil spec spring.
@1ModernDayDadАй бұрын
Significant difference! There are a few other brands that do them as well, but totally worth it!
@RascalCatifyАй бұрын
@@1ModernDayDad Sweet! I have seen others as well but it seems the JP one is the most used.
@Primordial_CitizenАй бұрын
Is the spacer necessary?
@Grendel_65Ай бұрын
Pulled at an odd angle on the last one. I used to have that trigger. Super smooth. Nice vid
@1ModernDayDadАй бұрын
Yeah, I was trying to get a different perspective of the camera so the trigger pull came out weird. 🤷♂️
@UneducatedGeologistАй бұрын
Great concise instruction
@seanrichard6164Ай бұрын
it literally comes with different size backstraps in the box......
@1ModernDayDadАй бұрын
It’s the texture, not the size that I don’t like.
@tedross2424Ай бұрын
with the adapter plate, can you still line up your iron sights if the Holosun fails? That's the only thing concerning me about mounting one on my HC pro.
@1ModernDayDadАй бұрын
Yeah, it’s just at the very bottom of the red dot. So it doesn’t co witness, but if the red dot fails you can still use the irons.
@tedross2424Ай бұрын
@@1ModernDayDad Thanks for your time.
@snappertrxАй бұрын
Had mine for maybe a year now. Fun gun!
@richieboguess9857Ай бұрын
I just got a Hellcat Pro and the Cyelee Cat Pro and finally got it mounted onto my gun tonight and it fit perfect without an adapter plate.
@1ModernDayDadАй бұрын
That’s a big draw for cyelee. No adapter is a much better fit!
@LiKWiDjayАй бұрын
Ur lil pea shooter no match for mi .44 magnum😂
@jamesmcallister2005Ай бұрын
What’s this run?$
@1ModernDayDadАй бұрын
$625 I think. Picked mine up used for $585
@LateNightJamsАй бұрын
bahaha epic gun
@jasonbailey9302Ай бұрын
Vuh gine uh.
@bkhix208Ай бұрын
TTI 1500 rounds 0 failures. Love mine.
@TomJones-uf5slАй бұрын
One of the best videos I have ever seen on any subject on KZread! Thank you!
@1ModernDayDadАй бұрын
Wow, thanks!
@AndrewCMCАй бұрын
Fellow dad waiting for Cyelee to release green dot versions of the Cat Pro and X Pro 🤝🏻
@FTW1374Ай бұрын
How soft do you need an Ar to shoot?🤷🏻♂️😂😂😂😂🙄
@AmmoAlchemistАй бұрын
Lower is lower
@1ModernDayDadАй бұрын
Pump once. Shoot twice. What do you think?
@bigangel13Ай бұрын
this pistol is making Taran Tatical look bad with all the failures to feed.
@Bigfoothawk19 күн бұрын
Canik built it not Taran
@yannersYTАй бұрын
Followed this video today after buying the kit you linked in the description, which Amazon had it here within 2 days and delivered it on a Sunday, the kit worked perfectly. Although I encountered lots of cuts on the hands, sweat, and stripped screws I had to replace and use a screw extractor kit (we bought ours used) it ended up working out at the end. No more annoying noises and works just fine. Spent about an hour taking it apart and about 6 hours putting it back together, mainly because all of the stripped screws and bad job the previous owners did before we bought it. But this video was the only one out of about 40 videos I looked at that worked for me and was informative for me. I’m only 21 and I haven’t done much handy man work in the past on appliances in the house but since I moved out I’ve had to figure out a way to fix things that I had issues with. Thank you so much, you saved our household from losing their mind from that awful noise. Incase anyone else is wondering, our washer/dryer model was “flxe52rbs8” and it worked for us
@1ModernDayDadАй бұрын
You’re awesome! Nice work getting through it even with stripped screws. Glad this helped!
@patriotplays6990Ай бұрын
Great video, informative and to the point. I actually own and enjoy both.
@jackripper6033Ай бұрын
Exile armory on KZread does shipping and been selling them for $835 since they released. I don’t have any idea why someone would pay $1200 for this. Rival SF is a better gun.
@LateNightJamsАй бұрын
Interesting. Were they in stock? I saw a few stores that had them for less than $1,000 but rarely if ever actually had them in stock.
@Bigfoothawk19 күн бұрын
No one is paying 1200 it's 950
@declineofthewest.Ай бұрын
Thanks Dad!
@AverthithАй бұрын
The video was great but didn't address my issue - vacuum stops and starts when on high. I saw someone else in the comments aaked the same and you said to clean the filters. I took off the back filter at the top of the machine to clean it, immediately my dyson v6 worked! Ty
@1ModernDayDadАй бұрын
Glad you got yours fixed. This is definitely part 1 of 2. Perhaps I should make a video of washing the filters out. I just haven’t had mine clog in a long time since cleaning them.
@milkbones504Ай бұрын
I have the the sfx rival polymer grey like yours. I put a few upgrades on it extended threaded barrel, comp, red dot and low compression springs. It's crazy good. But I think I'll wait for the price to drop a little more on the tti combat
@BullseyeBallistics-kf1jwАй бұрын
I would much rather own a Shadow Systems XR920P over a TTI Canik. Also, you can take the compensator off and it's tooless.
@TheTruthfulone69Ай бұрын
Have the polymer rival with threaded barrel and comp. It does not move. I’m a Canik fan but see no other reason to buy it unless you collect TTI stuff. If it was metal frame different story.
@mickeychumaАй бұрын
Canik 🥴🤢
@ericarmendariz9195Ай бұрын
How you feel the trigger on that?. I try the Canik before and I don’t like the sense is like 2 bumps before the shoot.
Пікірлер
Very helpful thank you...just the lip smacking. Ughhhh
I prefer the gap. It keeps the light switches out of the trigger guard. Just a personal preference.
That’s a great point. Hadn’t thought about that for the gap before!
Do you think this is a better option than the 10in and oil needed saw? I probably have more trees than you to cut and wondering how it fair against oak hard wood 🤔. Great video!
Oo. Fair question. I really like the oil free option just for maintenance sake. I was cutting an older tree obviously. Not sure on oak, but it really cut just fine. If you’re fine with the oiling I’d go with the 10”. But for me the oil free option cut strong enough. I cut another tree at my work (not sure what type) but that was thicker and cut it pretty good too. Just can’t have the branches be too thick since it’s only 8”. 🤷🏼
Got mine today , the TLR 7 X USB .
I just bought one today for $11.99 I couldn't resist 😅
That’s a killer deal. Honestly a great tool to keep handy.
Dude, pay the extra money to get your slide milled to fit the 507k. Holosun has been in the game for a long time and they are fantastic optics. I got mine done by C&H Precision and I'll never look back.
Oh nice. How much was that to get done?
TTI -Taran Turd Infection...
Just got mine today , thanks for your videos. I am doing a similar build looking at your holster video now ,also question he Hellcat pro there is a rattle noise what looks to be the firing pin moving as the gun is slide back is that normal ?
Mine has that same rattle and I think it’s the firing pin. If I remember correctly that’s only if the trigger is released. So you can cock, but not chamber a round and that solves it. Or obviously chamber a round and that sets the firing pin in place.
That seems really useful. Thanks for reviewing this.
Just curious did you private sell to someone or back to a dealer wondering what you got for it
$950
@@loucatmeow13 Oooh he’s not tellin 😊
I pulled the striker and cleaned everything completely and now have put about 500 rounds through with no problems
Nice. Glad a thorough cleaning did the trick for you!
Got my TTI a few weeks ago and have put 700 rds in it. It has a 3-4% failure to feed rate so I contacted Canik and are sending me a spring that they created to fix this widespread problem. I love the TTI and hopefully their new high performance recoil spring works!
Wow. That’s crazy high. Curious what’s new in the recoil spring. Hopefully that solves it! I’m a fan of Canik overall, just not this one.
@@1ModernDayDad Regarding the high performance recoil spring theyre sending, they said its ideal for use with certain high-power loads, or in situations where a high weight recoil spring is needed. The one it came with is supposed to be for 115 and 124 grain which is what i was shooting but we’ll see
I've heard that a lot of guys are selling their TTI Combat because of an epidemic of soft hands in society.
I like the grip texture… hands not gonna slip while shooting
100000% agree with all of this. I traded for a new SFX rival s
I’ve felt that one a few times at the store and it feels sooo much better! The steel is a huge upgrade.
Great video! Just installed mine with your guidance. Very crispy 👌🏽
Love to hear it. Happy training!
I have the old style set and I have sheared grade 8 bolts with the 1/4in set. I have had amazing results in durability of the 3/8ths and 1/2in set.
That’s great to hear. It’s a great brand so far for me!
I definitely relate to the sand paper fixed it with combat tape feels amazing now and the recoil is nice also appreciate the second spring
I need to find someone with an SSA-E I can try out. I got the SSA-X for my “house gun” because I wanted a duty grade trigger that wasn’t too light. Got it installed and it’s way lighter than I thought it would be, which I found isn’t a bad thing. The wall is really well defined so I’m not worried about ND’ing like I thought I would be with such a light trigger. I saw the ~4lb pull weight and didn’t realize each stage was ~2lbs 😂. I’m curious how it would feel a pound lighter though. May get the enhanced version for one of my other AR’s.
This helped thx!
Thanks. Mine didn't come with the lube for some reason. From Brownell.
I bought mine from PSA and it didn’t come with lube or the slave pin. It came in a plastic bag with a PSA sticker on it with the part number. Emailed PSA about it, they sent me an rma to return it, no explanation. Then called Geissele and they said they quit putting the lube in with the triggers a few months back. They sent me a couple packs of lube and 2 slave pins.
I did one of these recently but then realized the retractable is pointless. Once you park there is no reason it needs to be retracted. The only reason to retract it is when you move the cars out and want to work in the garage. This is fine if you are working in garage with the door closed but if you want to open it, the ball will drop. So I undid the work I had just done (retractable ball) and instead put fish eye hooks on a out of the way spot of my work bench. My ball stays down all the time unless I want it out of the way, then I manually pull a carabiner clip down to another fish eye which raises both balls (wife's car and my car has one) up to freely work in garage. The retractable idea is really cool it's just not really serving any purpose. I recommend the manual version when you can actually move the balls out of the way when you need to work in garage. This solves all the issues (like kids playing with it, them in the way when door is open while working in garage or doing yard work etc.
That’s a clever design. What I like about the retractable is it tells me if the garage door is up or down. Obviously I could look in the mirror, but we’ve had a few times where it stopped 80% up and the ball would tell us that, but my limited view in the mirror shows the garage is fully open.
@@1ModernDayDad Makes sense! I think the retractable is cool for sure! Didn't mean to like be negative toward it that was more more for me as when I did it I realized it was pointless for me haha. But I didn't think about the garage open close thing but we always look in our mirror or camera plus the car will beep like mad (newer cars) if you put it in reverse when the door is closed. Great video none the less!
Is the spacer necessary?
Only if it rattles a little bit. I put mine in. Shook it and it seemed to rattle a touch. So I put it in and that solved it.
@@1ModernDayDad mine still makes a slight noise with spacer… is that bad ?
Short and too the point, great vid! This is the next addition to my AR, I assume its much quieter than the cheese grater mil spec spring.
Significant difference! There are a few other brands that do them as well, but totally worth it!
@@1ModernDayDad Sweet! I have seen others as well but it seems the JP one is the most used.
Is the spacer necessary?
Pulled at an odd angle on the last one. I used to have that trigger. Super smooth. Nice vid
Yeah, I was trying to get a different perspective of the camera so the trigger pull came out weird. 🤷♂️
Great concise instruction
it literally comes with different size backstraps in the box......
It’s the texture, not the size that I don’t like.
with the adapter plate, can you still line up your iron sights if the Holosun fails? That's the only thing concerning me about mounting one on my HC pro.
Yeah, it’s just at the very bottom of the red dot. So it doesn’t co witness, but if the red dot fails you can still use the irons.
@@1ModernDayDad Thanks for your time.
Had mine for maybe a year now. Fun gun!
I just got a Hellcat Pro and the Cyelee Cat Pro and finally got it mounted onto my gun tonight and it fit perfect without an adapter plate.
That’s a big draw for cyelee. No adapter is a much better fit!
Ur lil pea shooter no match for mi .44 magnum😂
What’s this run?$
$625 I think. Picked mine up used for $585
bahaha epic gun
Vuh gine uh.
TTI 1500 rounds 0 failures. Love mine.
One of the best videos I have ever seen on any subject on KZread! Thank you!
Wow, thanks!
Fellow dad waiting for Cyelee to release green dot versions of the Cat Pro and X Pro 🤝🏻
How soft do you need an Ar to shoot?🤷🏻♂️😂😂😂😂🙄
Lower is lower
Pump once. Shoot twice. What do you think?
this pistol is making Taran Tatical look bad with all the failures to feed.
Canik built it not Taran
Followed this video today after buying the kit you linked in the description, which Amazon had it here within 2 days and delivered it on a Sunday, the kit worked perfectly. Although I encountered lots of cuts on the hands, sweat, and stripped screws I had to replace and use a screw extractor kit (we bought ours used) it ended up working out at the end. No more annoying noises and works just fine. Spent about an hour taking it apart and about 6 hours putting it back together, mainly because all of the stripped screws and bad job the previous owners did before we bought it. But this video was the only one out of about 40 videos I looked at that worked for me and was informative for me. I’m only 21 and I haven’t done much handy man work in the past on appliances in the house but since I moved out I’ve had to figure out a way to fix things that I had issues with. Thank you so much, you saved our household from losing their mind from that awful noise. Incase anyone else is wondering, our washer/dryer model was “flxe52rbs8” and it worked for us
You’re awesome! Nice work getting through it even with stripped screws. Glad this helped!
Great video, informative and to the point. I actually own and enjoy both.
Exile armory on KZread does shipping and been selling them for $835 since they released. I don’t have any idea why someone would pay $1200 for this. Rival SF is a better gun.
Interesting. Were they in stock? I saw a few stores that had them for less than $1,000 but rarely if ever actually had them in stock.
No one is paying 1200 it's 950
Thanks Dad!
The video was great but didn't address my issue - vacuum stops and starts when on high. I saw someone else in the comments aaked the same and you said to clean the filters. I took off the back filter at the top of the machine to clean it, immediately my dyson v6 worked! Ty
Glad you got yours fixed. This is definitely part 1 of 2. Perhaps I should make a video of washing the filters out. I just haven’t had mine clog in a long time since cleaning them.
I have the the sfx rival polymer grey like yours. I put a few upgrades on it extended threaded barrel, comp, red dot and low compression springs. It's crazy good. But I think I'll wait for the price to drop a little more on the tti combat
I would much rather own a Shadow Systems XR920P over a TTI Canik. Also, you can take the compensator off and it's tooless.
Have the polymer rival with threaded barrel and comp. It does not move. I’m a Canik fan but see no other reason to buy it unless you collect TTI stuff. If it was metal frame different story.
Canik 🥴🤢
How you feel the trigger on that?. I try the Canik before and I don’t like the sense is like 2 bumps before the shoot.