Пікірлер

• 
  @kensaejao52167 күн бұрын

  If all else fails, relocate the inner ear mic away from center will fix the problem.

• 
  @VIIXXI19917 күн бұрын

  i was afraid of opening my headphones but it was worth it - now i can wear them again!!!!

• 
  @Langenbacher18 күн бұрын

  I also had this ringing sound, and it drove me nuts. I saw the microphone had some green deposit, around where it was soldered onto the microphone. Cleaned it up with nailpolish remover on a q-tip (alcohol is preferred, but I didn't have that at hand), and the problem was solved!

• 
  @AZ2004-q4b20 күн бұрын

  Hi, I got my new paire of headphones XM5 juste 3 days ago, but I feel like the left ear on the headphones are tighter which is good but for the right ear I feel it less tighter, and that is bothering me, please you have a solution or you know the problem where is came Fromm ??

• 
  @Dzalesin22 күн бұрын

  Positive feedback? It's look like terrible Sony engineering!

• 
  @johnrvt27 күн бұрын

  Worked

• 
  @CYMotorsport29 күн бұрын

  it's likely you just adjusted the wires and shifted them when you took it apart. dust doesn't result in audio interference. If i had to guess, it's likely the issue returned but this video wouldn't capture that. and for many others saying it worked that's also possibly true. though a short can be resolved long term if you twist a wire corretly but more than likely it'll be back

• 
  @signedelacroix7213Ай бұрын

  Nice job.

• 
  @balexicАй бұрын

  Thanks. Suggestion… your recording volume is very low. I had to shut off my tv to hear you. I have my iPhone volume at full too.

• 
  @gordonhardwick5151Ай бұрын

  A really helpful post, well described and a good pace, plus some very good comments. I will definitely try this on my damaged door. I will check the suitability of my contact adhesive, which in the UK is often Evostick. One question though: was there a reason why, having built up the layers with undercoat (very sensible), you didn't put some gloss on top? Thankfully my door is white so I don't have to colour-match your ivory!

• 
  @Rosebud100Ай бұрын

  Thank you, you have saved my life!

• 
  @vladimirb2153Ай бұрын

  Thanks! Cleaning the microphone did it for me, was getting worried that they are broken

• 
  @poneill652 ай бұрын

  The MOST important place to look and clean is the UNDERSIDE those little grey/white microphone covers. You will no doubt find a thick coating of skin oil/ear wax that has evaporated and condensed there (also clean the mic of this greasy layer) One extra think I did, that I don't know is beneficial is I wrapped the mic circumference in a very small strip of tape. I was thinking that being directly pressed into the hard plastic mounts might lead to vibration and tape might ease that)

• 
  @marranito9112 ай бұрын

  I've had the WH-H910N headphones for two years and I was listening a loud wind noise from the right side. I removed both ear cups and cleanned the ANC mic, oh god what a difference that made. They sound like brand new! Thanks a Lot!!

• 
  @SPACEMUSIC4582 ай бұрын

  I just repaired the headband of a pair of Gold Wireless, the 2017 model. I can't believe the amount of Sony headsets that present issues after the years, I'm never going to buy one ever again. Fuck Sony really.

• 
  @bravozavalaguillermojoel88643 ай бұрын

  You know where can I buy the mics?

• 
  @cherry_.pickers3 ай бұрын

  sounds like you're wearing heavy lips gloss

• 
  @weatherwaxusefullhints29393 ай бұрын

  The second kind of reset did it for me. Thanks!

• 
  @Srhodes05193 ай бұрын

  Thank u!

• 
  @roxannaghita60933 ай бұрын

  That is crazy that they didn't design this the proper way to stop over flowing!, you sir are smarter then the designers!!! Love the gentle kitty sound in the background!! :::)))

• 
  @kellyhyden20693 ай бұрын

  Ppl do look very close at one most expensive addition of a home,

• 
  @angrychivafan3 ай бұрын

  Why can’t you use oil? Can you use a spray?

• 
  @showtime18783 ай бұрын

  Can you speak louder?

• 
  @saltysebass55313 ай бұрын

  10/10 video. No notes.

• 
  @kennethfollmann28083 ай бұрын

  Thank you for a solution and I enjoyed your soothing voice

• 
  @xotwod32543 ай бұрын

  0:34 throw a warning on screen next time

• 
  @briano6724 ай бұрын

  I have a deadbolt with keys on both side s. The inside works fine with the key but outside doesn’t. I think a friend might have damaged it forcing a wrong key but not sure. What should I do?

• 
  @blzt32064 ай бұрын

  No way what’s up dude?! I once used JB weld to stop a coolant leak while I was broken down in the mountains. Worked like a charm.

• 
  @bharghavak3 ай бұрын

  Hope it's a good bond, metal to plastic

• 
  @CarlaEnglandRealtor4 ай бұрын

  Thank you for showing all the problems it could be. The last issue was mine.

• 
  @marcs_gaming_paradise4 ай бұрын

  removing the black part doesnt Always work

• 
  @r9birth4 ай бұрын

  Sweating and rain even the slightest will cause this problem.

• 
  @ronfrick51094 ай бұрын

  Managed to clean mine with boiling the basket in a solution of fresh water, course salt and vinegar ( about 1/3rd vinegar and 2/3rds water) boil for 20 min and does the same job, without toxic chemicals

• 
  @doregon3 ай бұрын

  How much salt?

• 
  @AsianManZan4 ай бұрын

  You must be quite the audiophile. Lots of head phones!

• 
  @AsianManZan4 ай бұрын

  The king is back!

• 
  @moordpodcast4 ай бұрын

  very soothing, thansk! and you're right, people shouldn't be looking that closely at your cabinets ;-)

• 
  @quincee33764 ай бұрын

  Thanks.

• 
  @MarsLonsen4 ай бұрын

  this guy is drowing in saliva

• 
  @13ogre5 ай бұрын

  Bro why is your voice so low

• 
  @Sahbab115 ай бұрын

  Setting the noise cancelling to 1 I hear absolutely 0 difference between the setting turned off and on :(

• 
  @Str8Haste5 ай бұрын

  This repair depends entirely on the material of the plastic. Tried this with mine and contact cement will melt the plastic.

• 
  @kzdz5 ай бұрын

  He rly cook the smartwatch 😅

• 
  @kzdz5 ай бұрын

  That's the biggest tablespoon I've ever seen

• 
  @user-pi8ss5xb8k5 ай бұрын

  Cqn you please tell me the glue you used ? Thabk you

• 
  @skyeshrum2 ай бұрын

  It looks like LePage to me. There's just a piece of electric tape covering the brand name. About $17 on Amazon

• 
  @msmith76325 ай бұрын

  Can you show how to stain/ paint the patch to see the finished repair please?

• 
  @user-dg8ym7wh9t5 ай бұрын

  This helped me out alot, it looks good as new! Thanks for the video! Cheers from Karachi Pakistan!

• 
  @user-dg8ym7wh9t5 ай бұрын

  hi

• 
  @treemoon5 ай бұрын

  I want to seperate small cap like you, I can't😂

• 
  @robertsemail14066 ай бұрын

  Thank you so much! 🤩I think that removing the glue from the microphones actually fixed the screeching.😅

• 
  @aunjaelennon6 ай бұрын

  bro i want you to know from the bottom of my heart that I appreciate the hell outta you. i love my m4s and have had them for years and now I get to keep using them. i had stoped using them for a few months cause of the noise but I found your video today and now they work. THANK YOU SO MUCHHHH <3

• 
  @nickb6546 ай бұрын

  Nothing fixes it. Still squals loudly. Returning them for a refund. Garbage.

• 
  @yadalong20046 ай бұрын

  What about if you locked out n u can’t get in to change the lock