Thanks, your video showed a better method to remove the top bit than the first one I found.
@kaisbeidi66259 сағат бұрын
Thank you !
@dlwrma783211 сағат бұрын
is this the same as the jbl tune 520bt?
@newbiegarden13 сағат бұрын
I ordered the battery you linked to and it was too thick so I had to return it.
@only_noa0921 сағат бұрын
what if there are no three dots???
@tinozaharia9062Күн бұрын
❤ thank you. Work's with studio 7
@discoverarcaneКүн бұрын
Saved my headphones 🫡 thank you man
@e.m.dawson8653Күн бұрын
What to do when the fan is slinging water back through the vents?!
@mauriciosarkisКүн бұрын
The left Bud was really low volume. Now it's perfect
@illiemp1Күн бұрын
Thank you so much!!! I reset my iPhone and I couldn’t pair it with my two Sony xb13 and thanks to you I did it in just 1 minute 🙏
@ildlyn8966Күн бұрын
Well I'll be damned it worked. Ty guy
@jaxunableКүн бұрын
it worked, thanks!
@taurusrae7630Күн бұрын
Doesnt work form mine but thanks
@WildfireWizzerКүн бұрын
Thank you
@iforst1639Күн бұрын
I'm braindead so it still took me 10 minutes to put it back on... But thank you so much
@juandavidayala23202 күн бұрын
thank you brooo! I needed the 3d document, ty
@LayLayscoom2 күн бұрын
Bro it actually work IM SO HAPPy AND SHOCKED
@Fluberx2 күн бұрын
At first i was underwhelmed, but the method worked 😂❤, the longer you keep the earbud in the liquid (for example 1 hour), the better the results 😊
@ShahidAli-gv9ol2 күн бұрын
Touch is not working
@svenausnorddeutschland652 күн бұрын
Vielen Dank. Das Video ist sehr hilfreich. Ich suche eine Zündspule für einen Fleurelle Rasenmäher (FBM 53 RH-OHV) von 2010. Ich habe herausgefunden, dass der Motor vom Hersteller Loncin ist. Typ LC1P70FA. Hierfür finde ich auch Zündspulen. Durch die Bauart des Rasenmähers scheint ein längeres Zündkabel erforderlich zu sein. Auf den Zeichnungen sind die Zündkabel deutlich kürzer. Wie finde ich eine passende Zündspule. Welche Parameter sind wichtig. Vermutlich gehen auch andere Hersteller. Danke und Gruß, Sven
@natnaelteferi-tf2ft2 күн бұрын
Great job Mr.
@deannaslawinski95002 күн бұрын
I literally bought my headphones this morning and now one isn’t working 😢
@georgem43682 күн бұрын
Used this video only to disconnect my battery because of some connecting problems and it worked!!! Very helpful video!
@lilianarangel48092 күн бұрын
Took mine back for an exchange cause I thought it didn’t work 😅 who would’ve known it take long to start the lava
@tainaraoliveira.p2 күн бұрын
👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽
@melodyx76353 күн бұрын
Does JBL sells those wires with mic? Or where can I found one? How much do they go for?
@Ry464373 күн бұрын
My headband snapped on this same model. Everything else is in perfect condition. Is there a way to replace the headband? 😢
@nikkig50603 күн бұрын
Mine isn't blowing cool air anymore
@dejahdenaefunhouse15053 күн бұрын
Thank you🎉
@Hjgfrfjufdetivjiu3 күн бұрын
not working
@mesomonster3 күн бұрын
So simple tysm
@nicolassun79383 күн бұрын
Finding the battery can be hard, just search for "battery lithium ion 3.7v 702035". You can find higher capacity one on the part market. Be sure to take only some with BMS. (Advice given for information purpose only, follow it at your own risk...)
@vhfgamer3 күн бұрын
Tech tip. To extend the life of your new battery to be the max it possibly can be, do not leave your tooth brush charging on the charger all the time. Lithium batteries actually don't enjoy being fully charged 100% of the time. I unplug my charging base so I can stand my toothbrush up on it without charging. I only charge when the indicator on the toothbrush indicates one battery tick left out of three. This only needs to be done once every week or two. I have three of these brushes in my house, all of which are a decade old with the original batteries that still work.
@huiwagner82853 күн бұрын
Bitte nicht auf die Bürstenstange aufschlagen. Kann gutgehen, muss es aber nicht. Das Vibrator-Kopfteil besteht aus Druckguss-Material, vermutlich Zink. Das ist recht empfindlich, z.B. auch wenn das Handstück mit aufgesetzter Bürste runterfällt und kopfüber auf den Boden aufschlägt. Dann kann das Vibrator-Kopfteil brechen und die Zahnbürste vibriert kaum noch. In diesem Fall muss dieses Teil ausgetauscht werden (habe ich schon gemacht). Gibt es bei Ebay ("Elektrische Zahnbürste Verbindungsstange Teil für Philips") oder Aliexpress ("sonicare stange"). Ich empfehle dringend, den Boden des Handstücks mit einem oder zwei kleinen Schraubendrehern rauszuheben. Sonst: SUPER und vielen Dank.
@Afaafds3 күн бұрын
Thank you thank you thaaaaaankkkyouuuuuuu! You helped me a lot
@dikey22864 күн бұрын
🎉🎉🎉🎉🎉 thank you 🎉🎉🎉🎉🎉
@chickenmonkey884 күн бұрын
Oh wow. All I had to do was find my phone, disconnect from it, try crap for 20 minutes, look up a youtube video, put the bud in the case, take it out, tap on one of them once, then hold down for five seconds, then go to the settings in windows, then go to add a blue tooth device, then add it, then it doesn't connect, then try a bunch of weird taps for another five minutes, then put both of the buds back in the case, then take them out again, then connect and... it works! how easy is that? Holy god I hate blue tooth. It was always terrible and it just keeps getting worse.
@chickenmonkey884 күн бұрын
Spoke too soon. Even though it says it connected, it STILL doesn't actually work. JESUS CHRIST.
@chickenmonkey884 күн бұрын
Had to reboot my laptop and then I got a new dialog to pair as I was trying to connect. Then switched to the headphones in the audio panel. Pretty laggy, but finally sound was coming through.
@mikem48834 күн бұрын
Great video. I fixed the tiny clogged hole with the wire, and I know they did not put a drain hole or two in the rear for "efficiency" but I drilled 2 3/16" holes ( one on each side) as their efficiency means, a penny of electricity saved ( as a sell attraction) and a new air conditioner after a few years as it floods over again and one who does not check KZread has to purchase a new air conditioner, not knowing this clogging problem and the one wire trick. Personally, if this happens again, I will make that hole bigger also. Now working fantastic.
@lynntran55784 күн бұрын
Thanks very much.❤❤❤❤
@chinmayk80044 күн бұрын
Kinda like a tyre replacement
@sarie834 күн бұрын
My window is 34” wide, can the size AC that you used work? I think the mounting rail on the top was giving us a problem?
@billyorks33924 күн бұрын
Worked great for me. Thanks for posting this video. Very helpful. My model had 6 screws to remove. I didn't find removing the back was difficult. Start pulling it away on the sides at the bottom and work your way up to the top. Pull out and down. I also used needle nose pliers to remove the clip, sandpaper to clean the sensor and a Q-tip soaked in alcohol to clean the sensor tube.
4 күн бұрын
Que tamaño es el parlante ? necesito comprar repuesto para cambiarlo
@MegaSafetyFirst4 күн бұрын
The X5 Pro on Amazon: amzn.to/45EHkMK (Affiliate link)
@MaiaBain-v4p4 күн бұрын
how do u turn down the base lol
@ks-xv8hx4 күн бұрын
Thanks bro ❤
@avadhutp494 күн бұрын
I was on long trip, and it was showing two devices with same name for two separate buds. Used for 1 hr and tried resetting. I was about to throw everything out of window. This video saved my buds 😂
@boriscelarent5 күн бұрын
I replaced the battery, and the instructions were perfect-it works great now. Sure, $15 for a battery seems expensive, but considering my headset has lasted three years, it's worth it. I know I could order a cheaper battery from China for about $2, but ordering from Amazon means it arrives the next morning, keeping my $200+ headset working without much downtime.
Пікірлер
Thank you
Thanks!
Thanks, your video showed a better method to remove the top bit than the first one I found.
Thank you !
is this the same as the jbl tune 520bt?
I ordered the battery you linked to and it was too thick so I had to return it.
what if there are no three dots???
❤ thank you. Work's with studio 7
Saved my headphones 🫡 thank you man
What to do when the fan is slinging water back through the vents?!
The left Bud was really low volume. Now it's perfect
Thank you so much!!! I reset my iPhone and I couldn’t pair it with my two Sony xb13 and thanks to you I did it in just 1 minute 🙏
Well I'll be damned it worked. Ty guy
it worked, thanks!
Doesnt work form mine but thanks
Thank you
I'm braindead so it still took me 10 minutes to put it back on... But thank you so much
thank you brooo! I needed the 3d document, ty
Bro it actually work IM SO HAPPy AND SHOCKED
At first i was underwhelmed, but the method worked 😂❤, the longer you keep the earbud in the liquid (for example 1 hour), the better the results 😊
Touch is not working
Vielen Dank. Das Video ist sehr hilfreich. Ich suche eine Zündspule für einen Fleurelle Rasenmäher (FBM 53 RH-OHV) von 2010. Ich habe herausgefunden, dass der Motor vom Hersteller Loncin ist. Typ LC1P70FA. Hierfür finde ich auch Zündspulen. Durch die Bauart des Rasenmähers scheint ein längeres Zündkabel erforderlich zu sein. Auf den Zeichnungen sind die Zündkabel deutlich kürzer. Wie finde ich eine passende Zündspule. Welche Parameter sind wichtig. Vermutlich gehen auch andere Hersteller. Danke und Gruß, Sven
Great job Mr.
I literally bought my headphones this morning and now one isn’t working 😢
Used this video only to disconnect my battery because of some connecting problems and it worked!!! Very helpful video!
Took mine back for an exchange cause I thought it didn’t work 😅 who would’ve known it take long to start the lava
👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽
Does JBL sells those wires with mic? Or where can I found one? How much do they go for?
My headband snapped on this same model. Everything else is in perfect condition. Is there a way to replace the headband? 😢
Mine isn't blowing cool air anymore
Thank you🎉
not working
So simple tysm
Finding the battery can be hard, just search for "battery lithium ion 3.7v 702035". You can find higher capacity one on the part market. Be sure to take only some with BMS. (Advice given for information purpose only, follow it at your own risk...)
Tech tip. To extend the life of your new battery to be the max it possibly can be, do not leave your tooth brush charging on the charger all the time. Lithium batteries actually don't enjoy being fully charged 100% of the time. I unplug my charging base so I can stand my toothbrush up on it without charging. I only charge when the indicator on the toothbrush indicates one battery tick left out of three. This only needs to be done once every week or two. I have three of these brushes in my house, all of which are a decade old with the original batteries that still work.
Bitte nicht auf die Bürstenstange aufschlagen. Kann gutgehen, muss es aber nicht. Das Vibrator-Kopfteil besteht aus Druckguss-Material, vermutlich Zink. Das ist recht empfindlich, z.B. auch wenn das Handstück mit aufgesetzter Bürste runterfällt und kopfüber auf den Boden aufschlägt. Dann kann das Vibrator-Kopfteil brechen und die Zahnbürste vibriert kaum noch. In diesem Fall muss dieses Teil ausgetauscht werden (habe ich schon gemacht). Gibt es bei Ebay ("Elektrische Zahnbürste Verbindungsstange Teil für Philips") oder Aliexpress ("sonicare stange"). Ich empfehle dringend, den Boden des Handstücks mit einem oder zwei kleinen Schraubendrehern rauszuheben. Sonst: SUPER und vielen Dank.
Thank you thank you thaaaaaankkkyouuuuuuu! You helped me a lot
🎉🎉🎉🎉🎉 thank you 🎉🎉🎉🎉🎉
Oh wow. All I had to do was find my phone, disconnect from it, try crap for 20 minutes, look up a youtube video, put the bud in the case, take it out, tap on one of them once, then hold down for five seconds, then go to the settings in windows, then go to add a blue tooth device, then add it, then it doesn't connect, then try a bunch of weird taps for another five minutes, then put both of the buds back in the case, then take them out again, then connect and... it works! how easy is that? Holy god I hate blue tooth. It was always terrible and it just keeps getting worse.
Spoke too soon. Even though it says it connected, it STILL doesn't actually work. JESUS CHRIST.
Had to reboot my laptop and then I got a new dialog to pair as I was trying to connect. Then switched to the headphones in the audio panel. Pretty laggy, but finally sound was coming through.
Great video. I fixed the tiny clogged hole with the wire, and I know they did not put a drain hole or two in the rear for "efficiency" but I drilled 2 3/16" holes ( one on each side) as their efficiency means, a penny of electricity saved ( as a sell attraction) and a new air conditioner after a few years as it floods over again and one who does not check KZread has to purchase a new air conditioner, not knowing this clogging problem and the one wire trick. Personally, if this happens again, I will make that hole bigger also. Now working fantastic.
Thanks very much.❤❤❤❤
Kinda like a tyre replacement
My window is 34” wide, can the size AC that you used work? I think the mounting rail on the top was giving us a problem?
Worked great for me. Thanks for posting this video. Very helpful. My model had 6 screws to remove. I didn't find removing the back was difficult. Start pulling it away on the sides at the bottom and work your way up to the top. Pull out and down. I also used needle nose pliers to remove the clip, sandpaper to clean the sensor and a Q-tip soaked in alcohol to clean the sensor tube.
Que tamaño es el parlante ? necesito comprar repuesto para cambiarlo
The X5 Pro on Amazon: amzn.to/45EHkMK (Affiliate link)
how do u turn down the base lol
Thanks bro ❤
I was on long trip, and it was showing two devices with same name for two separate buds. Used for 1 hr and tried resetting. I was about to throw everything out of window. This video saved my buds 😂
I replaced the battery, and the instructions were perfect-it works great now. Sure, $15 for a battery seems expensive, but considering my headset has lasted three years, it's worth it. I know I could order a cheaper battery from China for about $2, but ordering from Amazon means it arrives the next morning, keeping my $200+ headset working without much downtime.