This channel is all about my life in the automotive world. I'll be featuring cars, reviewing products and anything else that is happening in my garage. Thank you for subscribing!
Whoa $180 for that piece of aluminum with some bolts? That’s wild.
@Hannibal546897 күн бұрын
I'll take the the classic impala over the Vette
@sirjizzle738412 күн бұрын
Great video
@shawnm259712 күн бұрын
I know this was posted a while ago, so I would hope there are lots of miles on the car now and more people that have done this. Have you (or anyone else that follows this cannel that has made this modification) had any problems with it? Also wondering if you or any followers have had any issues passing smog tests with this kit on? My opti is dying and I'm considering this modification, but the car is my daily driver so it will need to pass NV smog check annually. If anyone has done this mod please let me know if it causes you to fail smog check. Thanks.
@RubberCityMotoring7 күн бұрын
Hello! So I have sold the vehicle a few years back. Overall I didn't have issues with the Torqhead products; just getting the tuning dialed in with my 383 was the biggest challenge. Their setup is mostly designed around stock parts, which is ideal. I did pass an Ohio smog check with it here as well; not a visual inspection, but just a pcm check.
@dalehall299314 күн бұрын
Look up VLEDS.COM for the best leds😎👊🏻
@JoseRomero-sh4hq14 күн бұрын
Perfect 🎉🎉
@JoseRomero-sh4hq14 күн бұрын
4k
@ronibaloni407215 күн бұрын
Go-to Carwash replacement for the Mr. Clean Autodry carwash product that I use is AMMO NYC Hydrate, mist and wipe on with a damp microfiber towel to dry for a spot-free job. It is still more work than the Mr. Clean regime though. I have tried using the Mr. Clean spray gun w/new filter and different soaps but did not achieve the water-sheeting results that the Mr. Clean Polymer soap does. I have also tried stand-alone water filtration units that soften the water and remove all the sediment, but it still does not give the results of the Mr. Clean kit. From what I remember back when it was discontinued, I spoke to someone at P&G who said it cost more to manufacture than it retailed for. All good things come to an end, while bad thing never seem to end.
@RubberCityMotoring15 күн бұрын
Very interesting! Thanks for your insight. I sure enjoyed it back in the day.
@joedoe-sedoe797715 күн бұрын
They should allow accident with airbag deployed to all for free and have your auto insurance company pay a flat per incident fee for non members because most people have cell phone for talking or data and directions and dont want to pay double bills just to get the most serious issue of accident assistance…this could also save insurance money and lives.. since its available its a shame not to use it because of cost over risk benefit.. or as a second option im sure the accident victim would gladly pay a small one time fee so why isnt this on the table by law?
@LeoLarrosa198717 күн бұрын
I have the exact same 2010 got it with 37000 km now up to 51. I also want to open the engine bay with a zzp intake and possibly a catless maybe a hann or magna flo. But I love the stock no cel lol. Def don’t want to mess with my baby too much
@hillcountrygarage26 күн бұрын
"A lot sadder" LOL! That really describes the incandescent brightness!
@robbyburwell3875Ай бұрын
The bottom of the washer should be dry and the top of the washer should be lubricated so the bolt spins freely in the washer stays planted on the head surface not throwing off your torque spec because it will make sure the bottom of the washer is dry
@mrnobuddy2c569Ай бұрын
Talk about having someone clueless to show off your product. This guy is as useless as it gets.
@davehouston6528Ай бұрын
Where did you get the wheel caps?
@RubberCityMotoringАй бұрын
The center caps on the wheels are actually from a cavalier. I made a how-to video: Impala SS OEM Wheel Center Cap Upgrade - SUPER EASY! kzread.info/dash/bejne/iISVqa6vpM-_nKw.html
@davehouston6528Ай бұрын
@@RubberCityMotoring thank you
@RedFRCАй бұрын
For 97-00 the bleeding sequence is RR-LR-RF-LF. The sequence changes for 01-04, RR, RF, LR, LF.
@RubberCityMotoringАй бұрын
Solid! Thanks for the info!
@RobTheCloserRacingАй бұрын
Will this show you the transmission temp?
@RubberCityMotoringАй бұрын
It should if your vehicle has that in the pcm.
@benwright6307Ай бұрын
Works on my 2021 Acura RDX Aspec! Appreciate the hack
@user-wf2by9ik8pАй бұрын
To much work and to tight of an area ... I'm 6'3'', 280 lbs.
@RubberCityMotoringАй бұрын
Yea it’s a job for a cabin air filter I’ll agree.
@adamboyett9653Ай бұрын
Do you need a hyperflash?
@RubberCityMotoringАй бұрын
No not for these lights
@jeanbeaulieu7325Ай бұрын
Thanks for that video! I'm looking for an update that you can find easily for infotainment system (Seltos EX 2021) in the USA, but it's not available in Canada? Trying to have wireless Apple CarPlay
@RubberCityMotoringАй бұрын
The wireless is garbage for us. Wired isn’t even an option on this particular radio.
@ZebrajellyfishphotoАй бұрын
Thanks for a well done presentation AND would you suggest one unit that claims 2500 sq ft coverage for a 2nd floor home with 3 bedrooms and a couple of baths? Or should I buy a smaller unit, that covers smaller areas and move it from bedroom to bedroom? Appreciate your help!
@RubberCityMotoringАй бұрын
Yea I’d run with this one. Run it a few times too.
@ZebrajellyfishphotoАй бұрын
@@RubberCityMotoring Thank you.
@lesleyh2007Ай бұрын
The Fiat 124 Spider Lusso is always compared to the Mazda MX-5 GT and I get it as so much of the autos are interchangeable. There is a difference especially in styling however in powertrain also. Both are excellent roadsters and have their own loyal followers. For me I preferred the 124 Spider for its overall more European flair and I like the 1.4 Turbo for everyday driving. I don’t track my car but really love the handling, feel and low to the road driving. I have a red Spider with 6 speed manual. The manual transmission is a must for me. Puts the fun into driving a roadster and makes you feel in control over the engine. I likely would have loved the MX-5 also but the look of the Spider more closely represents the Roadsters I grew up enjoying.
@SpAzZzZz_Ай бұрын
Still have that MSD for sale?
@RubberCityMotoringАй бұрын
I do not, sorry!
@SpAzZzZz_Ай бұрын
@@RubberCityMotoring how much was the kit and did you have to flash the 411 pcm or was it plug and play
@SpAzZzZz_Ай бұрын
@@RubberCityMotoring no worries I was in a coma so I’m about 6 years late
@JSTNthe405Ай бұрын
Do you need the hyperflash harness with these leds?
@RubberCityMotoringАй бұрын
With these I did not. Plugged in and worked fine.
@flipphonewizard5448Ай бұрын
I don't want any car to adjust my speed or braking or steer for me............
@markcrisp4867Ай бұрын
I took the bigger bolt out & the unit came out
@markcrisp4867Ай бұрын
So the 3 bolts are screws ? That’s where I am now
@Dr.KlopekАй бұрын
Do you know someone to buy from? Do u have a paar to sell?🙏🙏
@RubberCityMotoringАй бұрын
I don’t have any to sell. A guy was making them in the TBSS Society Facebook group a few years back.
@Vivianauxito2 ай бұрын
Cool, Thank you for sharing this
@markcrisp48672 ай бұрын
Great video & I just ordered mine yesterday for my custom C5 & been watching videos on the install ? Where did you put your floor jack ?
@RubberCityMotoring2 ай бұрын
I have the jack pucks. They go in the holes underneath and you jack it in that location.
@markcrisp48672 ай бұрын
@@RubberCityMotoring ok cool I have my low profile Jack & 2 Jack stands my lights should arrive tomorrow & will install them this coming weekend great video 💯😎✌️
@emsteph2 ай бұрын
Looks like the center piece is for coins...different sizes.
@RubberCityMotoring2 ай бұрын
Yup did that. It holds them pretty well actually.
@TheRoseboi922 ай бұрын
How much money did you end up getting for these headlights?
@RubberCityMotoring2 ай бұрын
I believe around $600
@toyotabrony2 ай бұрын
Get ur hands on Lasfit - LC plus if u have fitment issues. Those led bulbs are design to be compact and fits 95% of the vehicle. They only draw 25W per bulb, 2500 lumens per bulb, with mall cooling fan. These are brighter than what u have. Cooling fan will cool alot more led
@tylerdurden-lv1cn2 ай бұрын
Do you still have it? How are you still liking it? Was thinking of picking one up…. Thanks, enjoyed the video.
@RubberCityMotoring2 ай бұрын
I do! Just hit 80k miles and love it. For a daily, fits everyone, does good mpg - you can’t beat it. It’s a blast to drive too. Hope you find one you like!
@tylerdurden-lv1cn2 ай бұрын
Thanks for the reply and cool you still own it. Is it roomy for a tall person over 6’?
@RubberCityMotoring2 ай бұрын
@@tylerdurden-lv1cn So I am about 6' even and don't have any issues. The seats are on a pedestal, kind of like an SUV type, so that is something to consider. I don't think that's very uncommon nowadays, but I'd say try a regular HHR in your area to see if you like the layout, visibility, etc.
@yes.40442 ай бұрын
Hey where did you buy the wire from?
@RubberCityMotoring2 ай бұрын
Found a guy selling all sorts of neat mirror upgrades. Check out bobsmirrors.com
@shoafymusic2 ай бұрын
Any clue where I can find one of them doors? I got a 2005 TB and definitely find it dumb to not have em!!
@RubberCityMotoring2 ай бұрын
TG Creative makes an aftermarket 3D printed one. Give him a look, nice guy and good company.
@shoafymusic2 ай бұрын
@@RubberCityMotoring thank you! Awesome video btw 😊 definitely helped me figure that out.
@shoafymusic2 ай бұрын
@@RubberCityMotoringoh man and I just put 2 and 2 together. Rubber city. I was thinking isn’t that Akron OH. I live really close to ya! About 15 mins south. C. Fulton. Keep up the vids man!! Been really getting into doing work on my TB. Im doing as much preventative maintenance on it as much as I can. Only got 130k on my 05 LS. Them straight 6s are super reliable as long as it’s well maintained. Have a great Sunday!
@RubberCityMotoring2 ай бұрын
@shoafymusic yes that’s is correct. Right up here in the west Akron area. Yea those 6s are no joke. Thanks for watching and best of luck with the TB.
@CAMAROZSS2 ай бұрын
Increasing sales?
@JeffLemayOfficiel2 ай бұрын
I change them for those too, but it was a pain in the ass the get all the wirings behind the lights🥵 My 63 has like a dual retainer cup (not 2 singles) that don't leave any free space ... it doesn't look at all like yours. I was able to jam it it all behind but everything is so tight ... I don't like that much. 😕 But the headlights are amazing! I can finally see at night! 😄
@nufsed2 ай бұрын
great video, good explanation as well
@robmack40102 ай бұрын
I used to run a busy detail shop and we used these all the time. We even had Ozone machines. The sponge method works well.
@sethr.46002 ай бұрын
the link for the work light no longer works. what was the brand? thx
@RubberCityMotoring2 ай бұрын
amzn.to/4blEkag
@sethr.46002 ай бұрын
excellent job describing
@CIVPIT5102 ай бұрын
The reson the 383 crank snout is sketchy is because the lt1 crank hub is a taper fit. The aftermarket crank is not
@RubberCityMotoring2 ай бұрын
Makes sense. Totally nerve wracking though!
@CIVPIT5102 ай бұрын
@@RubberCityMotoring Yeah try having the hub come loose at 7k rpm. Ruining the seal and having to get a tow. Twice. Keyed hub is the only way to go
@bams502 ай бұрын
Good video, got me even more excited! Unfortunately I won't be there until Monday, but that will leave me 5 days. I buy, sell, evaluate, and broker collector cars. Last year I sold a 2021 F-150 Super Snake with 700 miles and bought a 1991 (?) Grand Prix pace car. I'm all over the place, I'm surprised I didn't turn up in the video :) Maybe I'll see you there!
@RubberCityMotoring2 ай бұрын
That’s awesome! I’m hoping to go this year, trying to clear my schedule. Good luck this year!
@steveadams54172 ай бұрын
Appreciate the step-by-step install! I recently graduated from 1/32 scale slot cars to a 1/1 scale 50th Anniversary coupe, and am now working through exterior updates. I just replaced the tail lights, third brake light, and side markers with smoke LED from vette-lights, super easy install, even the hyper-flash bracket. I'm more nervous about the front corner lights, mainly because I'm not as young as I used to be and those are some tight spaces! Looking forward to watching your other C5 videos, especially on the paint restoration. Great channel!
@michaelsirvinskas68792 ай бұрын
Did we ever figure out what that hose does? You never told us
@RubberCityMotoring2 ай бұрын
Been so long I forget now! Maybe somebody will chime in...
@darknessislight36892 ай бұрын
I just bought one same color 😊 01 with 56k and I’m definitely doing this
@RubberCityMotoring2 ай бұрын
Awesome! Enjoy the lights and the car!
@ChristinaKennedy-mp5zd2 ай бұрын
Good video, Now I know what to expect when I change mine out.
@karltp2 ай бұрын
I have a black one as well. It's a 2008 that I bought new. I love mine. I have 233,000 miles on it now. Enjoy yours.
@shawnguillory2673 ай бұрын
Thanks for this video. I have a 96 C4 and vette lights recently released the laser style tails for us and I wanted to see how they performed before pulling the trigger on ordering them for my car.
Пікірлер
Whoa $180 for that piece of aluminum with some bolts? That’s wild.
I'll take the the classic impala over the Vette
Great video
I know this was posted a while ago, so I would hope there are lots of miles on the car now and more people that have done this. Have you (or anyone else that follows this cannel that has made this modification) had any problems with it? Also wondering if you or any followers have had any issues passing smog tests with this kit on? My opti is dying and I'm considering this modification, but the car is my daily driver so it will need to pass NV smog check annually. If anyone has done this mod please let me know if it causes you to fail smog check. Thanks.
Hello! So I have sold the vehicle a few years back. Overall I didn't have issues with the Torqhead products; just getting the tuning dialed in with my 383 was the biggest challenge. Their setup is mostly designed around stock parts, which is ideal. I did pass an Ohio smog check with it here as well; not a visual inspection, but just a pcm check.
Look up VLEDS.COM for the best leds😎👊🏻
Perfect 🎉🎉
4k
Go-to Carwash replacement for the Mr. Clean Autodry carwash product that I use is AMMO NYC Hydrate, mist and wipe on with a damp microfiber towel to dry for a spot-free job. It is still more work than the Mr. Clean regime though. I have tried using the Mr. Clean spray gun w/new filter and different soaps but did not achieve the water-sheeting results that the Mr. Clean Polymer soap does. I have also tried stand-alone water filtration units that soften the water and remove all the sediment, but it still does not give the results of the Mr. Clean kit. From what I remember back when it was discontinued, I spoke to someone at P&G who said it cost more to manufacture than it retailed for. All good things come to an end, while bad thing never seem to end.
Very interesting! Thanks for your insight. I sure enjoyed it back in the day.
They should allow accident with airbag deployed to all for free and have your auto insurance company pay a flat per incident fee for non members because most people have cell phone for talking or data and directions and dont want to pay double bills just to get the most serious issue of accident assistance…this could also save insurance money and lives.. since its available its a shame not to use it because of cost over risk benefit.. or as a second option im sure the accident victim would gladly pay a small one time fee so why isnt this on the table by law?
I have the exact same 2010 got it with 37000 km now up to 51. I also want to open the engine bay with a zzp intake and possibly a catless maybe a hann or magna flo. But I love the stock no cel lol. Def don’t want to mess with my baby too much
"A lot sadder" LOL! That really describes the incandescent brightness!
The bottom of the washer should be dry and the top of the washer should be lubricated so the bolt spins freely in the washer stays planted on the head surface not throwing off your torque spec because it will make sure the bottom of the washer is dry
Talk about having someone clueless to show off your product. This guy is as useless as it gets.
Where did you get the wheel caps?
The center caps on the wheels are actually from a cavalier. I made a how-to video: Impala SS OEM Wheel Center Cap Upgrade - SUPER EASY! kzread.info/dash/bejne/iISVqa6vpM-_nKw.html
@@RubberCityMotoring thank you
For 97-00 the bleeding sequence is RR-LR-RF-LF. The sequence changes for 01-04, RR, RF, LR, LF.
Solid! Thanks for the info!
Will this show you the transmission temp?
It should if your vehicle has that in the pcm.
Works on my 2021 Acura RDX Aspec! Appreciate the hack
To much work and to tight of an area ... I'm 6'3'', 280 lbs.
Yea it’s a job for a cabin air filter I’ll agree.
Do you need a hyperflash?
No not for these lights
Thanks for that video! I'm looking for an update that you can find easily for infotainment system (Seltos EX 2021) in the USA, but it's not available in Canada? Trying to have wireless Apple CarPlay
The wireless is garbage for us. Wired isn’t even an option on this particular radio.
Thanks for a well done presentation AND would you suggest one unit that claims 2500 sq ft coverage for a 2nd floor home with 3 bedrooms and a couple of baths? Or should I buy a smaller unit, that covers smaller areas and move it from bedroom to bedroom? Appreciate your help!
Yea I’d run with this one. Run it a few times too.
@@RubberCityMotoring Thank you.
The Fiat 124 Spider Lusso is always compared to the Mazda MX-5 GT and I get it as so much of the autos are interchangeable. There is a difference especially in styling however in powertrain also. Both are excellent roadsters and have their own loyal followers. For me I preferred the 124 Spider for its overall more European flair and I like the 1.4 Turbo for everyday driving. I don’t track my car but really love the handling, feel and low to the road driving. I have a red Spider with 6 speed manual. The manual transmission is a must for me. Puts the fun into driving a roadster and makes you feel in control over the engine. I likely would have loved the MX-5 also but the look of the Spider more closely represents the Roadsters I grew up enjoying.
Still have that MSD for sale?
I do not, sorry!
@@RubberCityMotoring how much was the kit and did you have to flash the 411 pcm or was it plug and play
@@RubberCityMotoring no worries I was in a coma so I’m about 6 years late
Do you need the hyperflash harness with these leds?
With these I did not. Plugged in and worked fine.
I don't want any car to adjust my speed or braking or steer for me............
I took the bigger bolt out & the unit came out
So the 3 bolts are screws ? That’s where I am now
Do you know someone to buy from? Do u have a paar to sell?🙏🙏
I don’t have any to sell. A guy was making them in the TBSS Society Facebook group a few years back.
Cool, Thank you for sharing this
Great video & I just ordered mine yesterday for my custom C5 & been watching videos on the install ? Where did you put your floor jack ?
I have the jack pucks. They go in the holes underneath and you jack it in that location.
@@RubberCityMotoring ok cool I have my low profile Jack & 2 Jack stands my lights should arrive tomorrow & will install them this coming weekend great video 💯😎✌️
Looks like the center piece is for coins...different sizes.
Yup did that. It holds them pretty well actually.
How much money did you end up getting for these headlights?
I believe around $600
Get ur hands on Lasfit - LC plus if u have fitment issues. Those led bulbs are design to be compact and fits 95% of the vehicle. They only draw 25W per bulb, 2500 lumens per bulb, with mall cooling fan. These are brighter than what u have. Cooling fan will cool alot more led
Do you still have it? How are you still liking it? Was thinking of picking one up…. Thanks, enjoyed the video.
I do! Just hit 80k miles and love it. For a daily, fits everyone, does good mpg - you can’t beat it. It’s a blast to drive too. Hope you find one you like!
Thanks for the reply and cool you still own it. Is it roomy for a tall person over 6’?
@@tylerdurden-lv1cn So I am about 6' even and don't have any issues. The seats are on a pedestal, kind of like an SUV type, so that is something to consider. I don't think that's very uncommon nowadays, but I'd say try a regular HHR in your area to see if you like the layout, visibility, etc.
Hey where did you buy the wire from?
Found a guy selling all sorts of neat mirror upgrades. Check out bobsmirrors.com
Any clue where I can find one of them doors? I got a 2005 TB and definitely find it dumb to not have em!!
TG Creative makes an aftermarket 3D printed one. Give him a look, nice guy and good company.
@@RubberCityMotoring thank you! Awesome video btw 😊 definitely helped me figure that out.
@@RubberCityMotoringoh man and I just put 2 and 2 together. Rubber city. I was thinking isn’t that Akron OH. I live really close to ya! About 15 mins south. C. Fulton. Keep up the vids man!! Been really getting into doing work on my TB. Im doing as much preventative maintenance on it as much as I can. Only got 130k on my 05 LS. Them straight 6s are super reliable as long as it’s well maintained. Have a great Sunday!
@shoafymusic yes that’s is correct. Right up here in the west Akron area. Yea those 6s are no joke. Thanks for watching and best of luck with the TB.
Increasing sales?
I change them for those too, but it was a pain in the ass the get all the wirings behind the lights🥵 My 63 has like a dual retainer cup (not 2 singles) that don't leave any free space ... it doesn't look at all like yours. I was able to jam it it all behind but everything is so tight ... I don't like that much. 😕 But the headlights are amazing! I can finally see at night! 😄
great video, good explanation as well
I used to run a busy detail shop and we used these all the time. We even had Ozone machines. The sponge method works well.
the link for the work light no longer works. what was the brand? thx
amzn.to/4blEkag
excellent job describing
The reson the 383 crank snout is sketchy is because the lt1 crank hub is a taper fit. The aftermarket crank is not
Makes sense. Totally nerve wracking though!
@@RubberCityMotoring Yeah try having the hub come loose at 7k rpm. Ruining the seal and having to get a tow. Twice. Keyed hub is the only way to go
Good video, got me even more excited! Unfortunately I won't be there until Monday, but that will leave me 5 days. I buy, sell, evaluate, and broker collector cars. Last year I sold a 2021 F-150 Super Snake with 700 miles and bought a 1991 (?) Grand Prix pace car. I'm all over the place, I'm surprised I didn't turn up in the video :) Maybe I'll see you there!
That’s awesome! I’m hoping to go this year, trying to clear my schedule. Good luck this year!
Appreciate the step-by-step install! I recently graduated from 1/32 scale slot cars to a 1/1 scale 50th Anniversary coupe, and am now working through exterior updates. I just replaced the tail lights, third brake light, and side markers with smoke LED from vette-lights, super easy install, even the hyper-flash bracket. I'm more nervous about the front corner lights, mainly because I'm not as young as I used to be and those are some tight spaces! Looking forward to watching your other C5 videos, especially on the paint restoration. Great channel!
Did we ever figure out what that hose does? You never told us
Been so long I forget now! Maybe somebody will chime in...
I just bought one same color 😊 01 with 56k and I’m definitely doing this
Awesome! Enjoy the lights and the car!
Good video, Now I know what to expect when I change mine out.
I have a black one as well. It's a 2008 that I bought new. I love mine. I have 233,000 miles on it now. Enjoy yours.
Thanks for this video. I have a 96 C4 and vette lights recently released the laser style tails for us and I wanted to see how they performed before pulling the trigger on ordering them for my car.