Hi is there any way u can get in touch with me as I need help with my hobda cbr 125rw
@KiayaGiberson5 күн бұрын
Hi is there any way u can get in touch with me as I need help with my hobda cbr 125rw
@frezto52846 күн бұрын
what exhaust is it?
@user-bk6gc7sl9z7 күн бұрын
wudnt want flat battry
@edarmstrong93899 күн бұрын
I loved two strokes back in the day. If the feds had not regulated them out of existence for road use, we would have things like an H-1 with 55 years of evolution behind it. Probably fast.
@stoicaluca28029 күн бұрын
Do you still have the front cowel that is around the headlight?
@H2Oredfirefox10 күн бұрын
Interesting I'm a gen 1 owner and it has its many problems once it gets beyond its age but I suppose that's the thing about all mopeds the numerous problems I came across is badly stored OEM parts a terrible cooling system that seems to be very finicky what's most of the time but doesn't always any one thing in the cooling system goes wrong and it throws the cooling system out apart from that it's reasonably ok just getting parts for has become more and more scarce I buy whatever parts I can find online I keep in storage in case something goes wrong but I'll say one thing when the baker running perfectly it works really well🤔🤔🤔🤔🤔😀😀😀😀
@chadclay164313 күн бұрын
Bike looks cooler without the side fairings I think
@MHolt-yq5vg13 күн бұрын
I am 71 years old and have to say I loved the two stroke bikes. The engines were fun.
@chrissinclair870515 күн бұрын
My first bike was a 1978 RD400 with a slight bit of jetting and Basani pipes. Definitely a handfull especially since the auto-oiler went tits up. Thanks a lot for the video and hello from Canada. I hope you and your family are doing well.
@2.8acres6615 күн бұрын
Great video
@grahamhenderson209715 күн бұрын
Hi josh how much do u pay for ur fairing plastics
@user-Merovingian198016 күн бұрын
will the yokes off that cb125r and swing arm fit the 2006 cbr125?
@JDMz16 күн бұрын
You can take the caliper off without bleeding it lol.
@user-Merovingian198017 күн бұрын
can you tell me which bikes are the fairings swappable what years i have a 2004 cbr with broken pnels can i buy some from other yers?
@ballkeeper666217 күн бұрын
where do you find these bikes, and get them home
@2.8acres6620 күн бұрын
Another great video. Keep them coming please
@johnpdixon22 күн бұрын
I’m not even a bike person but I want this bike.
@shadyjosh522 күн бұрын
Cheers yes this is a good one, love the wheels!
@johna696822 күн бұрын
Iv watched quite a few of these now and all seem winners. Have you had many lemons come your way?
@shadyjosh522 күн бұрын
I tend to be fairly good at picking the bikes with good risk/reward - the only real fail I think was the Honda GLR125 with a bent frame, white one - see the video
@jasoncarthew227922 күн бұрын
You looking to do any more cbr 125 projects ? Only asking as I'm looking to buy one. Cheers
@shadyjosh522 күн бұрын
I definitely will be, what kind of year, mileage and colour do you want? I can find you one - also where are you located?
@projectclark12322 күн бұрын
Hey
@trevorshort711922 күн бұрын
Amazing job there josh looks great
@shadyjosh522 күн бұрын
Thanks!
@user-Merovingian198024 күн бұрын
hope you buy a strimmer when you sell a bike
@user-Merovingian198024 күн бұрын
18:30 just took a chunk out the swing arm with that grinder
@MsRiley195626 күн бұрын
Had one back in the day. Mine was 400 Daytona special. I don't know what that difference was but I went from a 350 Rd to 4. 00 then to YZ465. Great bikes. Still riding 67 years old
@waynestanton46727 күн бұрын
I had a rd350....beast...550 Suzuki eater!!
@MadMarchTaffyАй бұрын
Takes me back to my youth - jealous!!
@brandenjohnd6745Ай бұрын
recently got in a accident on my cbr500 and my forks look exactly the same lol, i bought used ones but the fork seals are leaking could i do what you did and slip the bottom of my forks and slip them on to the straight fork tube
@brandenjohnd6745Ай бұрын
in every video i watch they disassemble the whole fork😭
@shadyjosh5Ай бұрын
yes that would work or change the fork seals it’s the same process. While forks are apart you might as well put new seals in as they do fail over timr
@brandenjohnd6745Ай бұрын
@@shadyjosh5oh okay thanks
@ripmax333Ай бұрын
Are these CB125F popular in UK? Because you surely are making them😅 and most probably making the owners really appreciate more these cool little bikes. Pls don't stop posting videos😊 maybe one day if you are able to get one at a good price you can make videos like watching a haynes manual 😅 including torque values and everything, I'm sure the videos will be popular. Perhaps other 125's like Honda PCX or even Yamaha YBR's could be popular.
@shaneduggan7901Ай бұрын
Tasty wheels had the 250 she was fast.
@ripmax333Ай бұрын
Did you checked how much it cost a new frame by anychance?
@rorymcmillan8978Ай бұрын
Hi mate at I’m looking for new headlight fairings the ones at 2:06 could you help me?
@richardbartlett40752 ай бұрын
That looks nice! I have a 1976 RD400. Not much is stock. The motor is high performance and I just recently fired the motor with an auxiliary gas bottle. I'm working on the gas tank and fiberglass body kit. I build and repair bikes, also my own boring and porting (SuperFlow machine). I have never rode this and I know I'm going to need to build a drag wheelie bar system. I'm 69 and flipping over isn't an option anymore haha. I will be running it on the drag strip but I installed all the lights and other needed BS so it will look legal. Got to use the street to test everything. I hope you are enjoying your bike, nothin quite like a 2-stroke on the street. Good luck!
@demirkandemirkaya2 ай бұрын
Hello, I have a CB125R and I'm having a stop problem. I think it's due to the valve settings. That's why you'll need to disassemble it. Can I open the top cover after removing the tank?
@demirkandemirkaya2 ай бұрын
Hello, I have a CB125R and I'm having a stop problem. I think it's due to the valve settings. That's why you'll need to disassemble it. Can I open the top cover after removing the tank?
@thomaswhittaker97852 ай бұрын
I could really do with your help, I have a 2015 cbr125r and it has a slight tapping noise I've had work done including the valves and cat and still doing it, is there any way I can message you directly I'm willing to pay for you help
@shadyjosh52 ай бұрын
whatsapp me on 07505910548 cheers
@hhjjjhjjj11432 ай бұрын
It a memory to me at age 18yrs.❤❤❤❤
@isamarmonteiromartinez31842 ай бұрын
Where did you buy the engine? Please I need one 2018
@neilhowarth93622 ай бұрын
Did you finish this project
@shadyjosh52 ай бұрын
I wasn’t able to, too many other projects came up
@MikeSmith-cc4wf2 ай бұрын
Can I ask what you paid for the bike and are you not in the United States? And if you're going to polish you get a buffing wheel polisher handheld machine.
@user-tm6nq3ou1v2 ай бұрын
I has RD-400 . For a stock light weight it was quick . Problem I had was keeping the front wheel n the ground . If I could get a new one I might buy it .
@thomaswhittaker97852 ай бұрын
Hi whwre are you located i have the smae bike 9n this video and could really do with some help
@shadyjosh52 ай бұрын
In SE London UK, where are you? what issues does the bike have?
@GPR1112 ай бұрын
RD400.... now we are talking classic Jap bike..... 👍
@alfiestanley6042 ай бұрын
im tring to replace my left hand garnish and im having an issue. do i need to remove the 8mm bolt at the bottom off the headlight asembly to get the garnish off? as the bolt at the bottom spins and can never be loosen nor tightened. Thanks :)
@shadyjosh52 ай бұрын
No leave the 8mm bolt that goes into the headlight alone. Undo the two philips screws under the front holding black plastic to black plastic, and also the two at the top near clocks/garnishes. after undoing these four unclip the whole front assembly with headlight garnishes screen and plastic frame complete as one unit
@alfiestanley6042 ай бұрын
@@shadyjosh5 thank you so much mate
@alfiestanley6042 ай бұрын
just a quick one mate where are the screws hoilding the blackpieces of plastic? I can find the ones at the top but not these.
@shadyjosh52 ай бұрын
@@alfiestanley604 underneath look behind the headlight under it they go up into the rear plastic subframe
@lezc37332 ай бұрын
Drops the cloth in the mud & carries on “cleaning” 😅😅😅
@shadyjosh52 ай бұрын
Where’s your video?
@lew-ejones-ayres50882 ай бұрын
Have you got any tips for finding the side fairings outside the official honda site? I'm trying to fix mine up but I'm not keen on spending £90 on a bit of plastic
@shadyjosh52 ай бұрын
if you want a new one they cost £90. if you eant a used one look on ebay and facebook
@lisameyer5002 ай бұрын
hi I saw that your engine control light is on. How did you get it off? mine lights up after the engine change
@bhanuprakashgottipalli21772 ай бұрын
Super Josh
@rickbowker2 ай бұрын
Great bike, had one back in the day, great wheelie machine in 3rd gear and sooo much FUN!
@davefish81072 ай бұрын
Passed my test in 1976 on the 250 and went straight to Eddie grimsteads in East Ham a got a new RD400 , great bike. I have had lots of bikes over the years but still remember that one
@alex-E7WHU2 ай бұрын
Smiffy had an rd350b, we used to go to the Ruskin arms on it and then try to get home in one piece afterwards.🤣
@davefish81072 ай бұрын
@@alex-E7WHU I remember the pub , seen a lot of bands there in the 70s , different world then Couldn’t pay me to go to East Ham now
Пікірлер
Hi is there any way u can get in touch with me as I need help with my hobda cbr 125rw
Hi is there any way u can get in touch with me as I need help with my hobda cbr 125rw
what exhaust is it?
wudnt want flat battry
I loved two strokes back in the day. If the feds had not regulated them out of existence for road use, we would have things like an H-1 with 55 years of evolution behind it. Probably fast.
Do you still have the front cowel that is around the headlight?
Interesting I'm a gen 1 owner and it has its many problems once it gets beyond its age but I suppose that's the thing about all mopeds the numerous problems I came across is badly stored OEM parts a terrible cooling system that seems to be very finicky what's most of the time but doesn't always any one thing in the cooling system goes wrong and it throws the cooling system out apart from that it's reasonably ok just getting parts for has become more and more scarce I buy whatever parts I can find online I keep in storage in case something goes wrong but I'll say one thing when the baker running perfectly it works really well🤔🤔🤔🤔🤔😀😀😀😀
Bike looks cooler without the side fairings I think
I am 71 years old and have to say I loved the two stroke bikes. The engines were fun.
My first bike was a 1978 RD400 with a slight bit of jetting and Basani pipes. Definitely a handfull especially since the auto-oiler went tits up. Thanks a lot for the video and hello from Canada. I hope you and your family are doing well.
Great video
Hi josh how much do u pay for ur fairing plastics
will the yokes off that cb125r and swing arm fit the 2006 cbr125?
You can take the caliper off without bleeding it lol.
can you tell me which bikes are the fairings swappable what years i have a 2004 cbr with broken pnels can i buy some from other yers?
where do you find these bikes, and get them home
Another great video. Keep them coming please
I’m not even a bike person but I want this bike.
Cheers yes this is a good one, love the wheels!
Iv watched quite a few of these now and all seem winners. Have you had many lemons come your way?
I tend to be fairly good at picking the bikes with good risk/reward - the only real fail I think was the Honda GLR125 with a bent frame, white one - see the video
You looking to do any more cbr 125 projects ? Only asking as I'm looking to buy one. Cheers
I definitely will be, what kind of year, mileage and colour do you want? I can find you one - also where are you located?
Hey
Amazing job there josh looks great
Thanks!
hope you buy a strimmer when you sell a bike
18:30 just took a chunk out the swing arm with that grinder
Had one back in the day. Mine was 400 Daytona special. I don't know what that difference was but I went from a 350 Rd to 4. 00 then to YZ465. Great bikes. Still riding 67 years old
I had a rd350....beast...550 Suzuki eater!!
Takes me back to my youth - jealous!!
recently got in a accident on my cbr500 and my forks look exactly the same lol, i bought used ones but the fork seals are leaking could i do what you did and slip the bottom of my forks and slip them on to the straight fork tube
in every video i watch they disassemble the whole fork😭
yes that would work or change the fork seals it’s the same process. While forks are apart you might as well put new seals in as they do fail over timr
@@shadyjosh5oh okay thanks
Are these CB125F popular in UK? Because you surely are making them😅 and most probably making the owners really appreciate more these cool little bikes. Pls don't stop posting videos😊 maybe one day if you are able to get one at a good price you can make videos like watching a haynes manual 😅 including torque values and everything, I'm sure the videos will be popular. Perhaps other 125's like Honda PCX or even Yamaha YBR's could be popular.
Tasty wheels had the 250 she was fast.
Did you checked how much it cost a new frame by anychance?
Hi mate at I’m looking for new headlight fairings the ones at 2:06 could you help me?
That looks nice! I have a 1976 RD400. Not much is stock. The motor is high performance and I just recently fired the motor with an auxiliary gas bottle. I'm working on the gas tank and fiberglass body kit. I build and repair bikes, also my own boring and porting (SuperFlow machine). I have never rode this and I know I'm going to need to build a drag wheelie bar system. I'm 69 and flipping over isn't an option anymore haha. I will be running it on the drag strip but I installed all the lights and other needed BS so it will look legal. Got to use the street to test everything. I hope you are enjoying your bike, nothin quite like a 2-stroke on the street. Good luck!
Hello, I have a CB125R and I'm having a stop problem. I think it's due to the valve settings. That's why you'll need to disassemble it. Can I open the top cover after removing the tank?
Hello, I have a CB125R and I'm having a stop problem. I think it's due to the valve settings. That's why you'll need to disassemble it. Can I open the top cover after removing the tank?
I could really do with your help, I have a 2015 cbr125r and it has a slight tapping noise I've had work done including the valves and cat and still doing it, is there any way I can message you directly I'm willing to pay for you help
whatsapp me on 07505910548 cheers
It a memory to me at age 18yrs.❤❤❤❤
Where did you buy the engine? Please I need one 2018
Did you finish this project
I wasn’t able to, too many other projects came up
Can I ask what you paid for the bike and are you not in the United States? And if you're going to polish you get a buffing wheel polisher handheld machine.
I has RD-400 . For a stock light weight it was quick . Problem I had was keeping the front wheel n the ground . If I could get a new one I might buy it .
Hi whwre are you located i have the smae bike 9n this video and could really do with some help
In SE London UK, where are you? what issues does the bike have?
RD400.... now we are talking classic Jap bike..... 👍
im tring to replace my left hand garnish and im having an issue. do i need to remove the 8mm bolt at the bottom off the headlight asembly to get the garnish off? as the bolt at the bottom spins and can never be loosen nor tightened. Thanks :)
No leave the 8mm bolt that goes into the headlight alone. Undo the two philips screws under the front holding black plastic to black plastic, and also the two at the top near clocks/garnishes. after undoing these four unclip the whole front assembly with headlight garnishes screen and plastic frame complete as one unit
@@shadyjosh5 thank you so much mate
just a quick one mate where are the screws hoilding the blackpieces of plastic? I can find the ones at the top but not these.
@@alfiestanley604 underneath look behind the headlight under it they go up into the rear plastic subframe
Drops the cloth in the mud & carries on “cleaning” 😅😅😅
Where’s your video?
Have you got any tips for finding the side fairings outside the official honda site? I'm trying to fix mine up but I'm not keen on spending £90 on a bit of plastic
if you want a new one they cost £90. if you eant a used one look on ebay and facebook
hi I saw that your engine control light is on. How did you get it off? mine lights up after the engine change
Super Josh
Great bike, had one back in the day, great wheelie machine in 3rd gear and sooo much FUN!
Passed my test in 1976 on the 250 and went straight to Eddie grimsteads in East Ham a got a new RD400 , great bike. I have had lots of bikes over the years but still remember that one
Smiffy had an rd350b, we used to go to the Ruskin arms on it and then try to get home in one piece afterwards.🤣
@@alex-E7WHU I remember the pub , seen a lot of bands there in the 70s , different world then Couldn’t pay me to go to East Ham now