Пікірлер

• 
  @imanshojaei908313 күн бұрын

  👍🙏

• 
  @watermenlon361715 күн бұрын

  Remember to remesh first in blender to make it quad and poly because it doesnt work on high poly mesh. it will have disjointed surfaces

• 
  @DigiSculptStudio6 күн бұрын

  how would I do that?

• 
  @watermenlon36176 күн бұрын

  @@DigiSculptStudio on the right side panel go to data tab and remesh is there. Lots of yt tutorial about that. Or you can use an add-on . Some addons let you do it automatically some manually or both

• 
  @DigiSculptStudio6 күн бұрын

  @@watermenlon3617 yes! i found it! thanks man! it kind ruined my model though. I tried to get it into creo parametric. I got it to open, but couldn't turn it into a solid. :(

• 
  @watermenlon36176 күн бұрын

  @@DigiSculptStudio if you added a subdivision modifier make sure that the quality is set to 1. Also this method is having touble with mirror modifier

• 
  @motorstory_521 күн бұрын

  bagus gambar nya ya./ hadir nyimak. mari mampir 4syb

• 
  @vinothvino2032Ай бұрын

  Nice but what is the purpose of this

• 
  @SolidworksPractice2Ай бұрын

  file management easier especially standard components

• 
  @migmurillo5127Ай бұрын

  You’re awsome

• 
  @user-jz4zu8ln5yАй бұрын

  기계적 원리가 대단하십니다 영상 잘보고 갑니다

• 
  @SolidworksPractice2Ай бұрын

  Thank you

• 
  @whathappen927Ай бұрын

  everything okay but when put decal image on player it's not showing 😞

• 
  @aaronnadar12742 ай бұрын

  Very Good

• 
  @SolidworksPractice2Ай бұрын

  Thanks

• 
  @shivamattarde66232 ай бұрын

  What is your frame per second settings in motion study ?

• 
  @SolidworksPractice22 ай бұрын

  I don't remember when I made this animation, but usually I set it at about 20-30 fps

• 
  @cadcaetutorial20392 ай бұрын

  Very nice sir

• 
  @cadcaetutorial20392 ай бұрын

  Great sir this lecture

• 
  @vrayonet3 ай бұрын

  Brilliant. Thank you.

• 
  @farhatkouif83713 ай бұрын

  bravo from algeria for you

• 
  @SolidworksPractice23 ай бұрын

  thank you so much

• 
  @tadeusztadek36913 ай бұрын

  Podstawowe blędy w kinematyce wytłoczki w czasie procesu tłoczenia. Półfabrykat jest rażąco za mały i w trakcie tłoczenia nie kurczy się - A POWINIEN.

• 
  @om_light3 ай бұрын

  Its looks like a partoff tool in design. How it should be cutting die.

• 
  @user-el1jb4gj9s3 ай бұрын

  Good job!

• 
  @userGGG7024 ай бұрын

  Thank you sir

• 
  @samshadloo68975 ай бұрын

  Woow...it is fabulous 🎉...thanks

• 
  @Sampson2012bot5 ай бұрын

  Thanks, I was trying to add to "selected contours" and that didn't work. I swear, it's always the simplest stuff in Solidworks that hangs me up.

• 
  @samarsekharreddy5 ай бұрын

  Good explanation

• 
  @think79756 ай бұрын

  thank you,感谢你分享，对我有很大帮助。❤

• 
  @hermansugiharto75436 ай бұрын

  Mantab,,😍😘

• 
  @SolidworksPractice26 ай бұрын

  Nuhun

• 
  @deepanshurawat76036 ай бұрын

  Blank kaise nikaloge sir

• 
  @asritasari32677 ай бұрын

  letaknya dimana ini mas? jalan sendiri kah? gak diambil org apa ya? brpaan ini mas kmeranya

• 
  @SolidworksPractice27 ай бұрын

  Pakai semacam tongkat teleskopik disandarkan dipundak kanan, gagangnya dijepit jari telunjuk +jempol sambil bawa motor hehe.. harga kamera 8 jt an kalo ga salah

• 
  @KiranKumar-dj5pw7 ай бұрын

  sir thank you.. it came really awesome. will practice more and more

• 
  @SolidworksPractice27 ай бұрын

  You are welcome

• 
  @sergiovilca3097 ай бұрын

  Hello! Thank you so much, you helped me a lot!

• 
  @SolidworksPractice27 ай бұрын

  You are welcome

• 
  @KiranKumar-dj5pw7 ай бұрын

  every part of this video is pure application of skills. thanks

• 
  @SolidworksPractice27 ай бұрын

  Thanks :)

• 
  @firatyildirim22887 ай бұрын

  That is very helpfull thanly you, subscribed.

• 
  @shahriar_asnafshishir53877 ай бұрын

  Thanks

• 
  @SolidworksPractice27 ай бұрын

  Ur Wellcome

• 
  @metahimik8 ай бұрын

  Thank you for the lesson! I really thought that there would be some kind of engine that would control the movement of the spring)

• 
  @JohnCoffee728 ай бұрын

  Good Job! I miss these features in Inventor! 😩

• 
  @mehmetfratdeniz58868 ай бұрын

  Very helpful tutorial, thank you! ❤

• 
  @SolidworksPractice28 ай бұрын

  I'm glad you like it :)

• 
  @Lifestyle_00058 ай бұрын

  Bhai handle sikhao banana surface Wale

• 
  @argoskafka40858 ай бұрын

  Hello. What can i do if the model has too many faces (about 40k polygons) and i need to import it to solidworks for a flow simulation? Thank you!.

• 
  @SolidworksPractice28 ай бұрын

  You can remesh it first using remesh feature in blender to make it low poly and quad

• 
  @htppppp33458 ай бұрын

  terlalu cepat untuk pemula seperti saya bg

• 
  @SolidworksPractice28 ай бұрын

  Ada versi lambat nya di video sebelumnya bg

• 
  @AbolfazelKharazmi-wd6pv9 ай бұрын

  How you make the man head ?

• 
  @SolidworksPractice29 ай бұрын

  using blender3D and then convert to solidworks.. there is tutorial tutorial how to convert blender 3D file to solidworks in this channel

• 
  @grantforsythe12809 ай бұрын

  You didn't show the underside - did it create an indent on the opposite side of where the bulge is?

• 
  @SolidworksPractice29 ай бұрын

  with a shell feature like that, all surfaces will have the same thickness, including the bulge

• 
  @grantforsythe12809 ай бұрын

  @@SolidworksPractice2 I tried replicating this method step by step after posting my question and discovered how it works - thanks for posting the video. I learned a new technique to add to my repertoire.

• 
  @grantforsythe12809 ай бұрын

  The music is putting me to sleep

• 
  @SolidworksPractice29 ай бұрын

  so watch the video every time you go to sleep :D

• 
  @jishnugopakumar9 ай бұрын

  Nice❤

• 
  @SolidworksPractice29 ай бұрын

  Thanks 🔥

• 
  @sergeyborisov516910 ай бұрын

  19:08 why does it give me an <Error> on Curve2? it says curves must be either all closed or all open (mixed cases not allowed). what i'm doing wrong??

• 
  @SolidworksPractice29 ай бұрын

  maybe the end of the curve does not touch the other curve (there is clearance)

• 
  @ahmednahdi481011 ай бұрын

  hi can i ask you how to create a single surface whitout any other surface from complex 3d its possibile?

• 
  @ahmednahdi481011 ай бұрын

  i need it for powermill "reference surface"

• 
  @SolidworksPractice210 ай бұрын

  Hmm i think its impossible

• 
  @ahmednahdi481010 ай бұрын

  like wrap model not to detailed@@SolidworksPractice2

• 
  @Bianchi7711 ай бұрын

  Creative video, well done, thank you for sharing it with us :)

• 
  @Solidworksfornoobs Жыл бұрын

  great video!! very helpful

• 
  @SolidworksPractice210 ай бұрын

  Glad it was helpful!

• 
  @NasirAhmed-el8bz Жыл бұрын

  ❤

• 
  @derryafandi7717 Жыл бұрын

  bang yang full ada skoknya ngga ada ya bang di akhir video animasinya ?

• 
  @SolidworksPractice2 Жыл бұрын

  Yang mana bang.. skoknya yang mana maaf ane belum paham hehe. Udah nonton part 2 nya?

• 
  @ArtyTheGreat Жыл бұрын

  Thank you!

• 
  @abdullahjaved8875 Жыл бұрын

  Greate idea....

• 
  @zimcarbone Жыл бұрын

  Nice use of fit spline

• 
  @formyfbrecovery1094 Жыл бұрын

  Useless

• 
  @krypticcarswell4807 Жыл бұрын

  Thanks for the cool tutorial!

• 
  @SolidworksPractice2 Жыл бұрын

  Glad you liked it!