I’ve done this, but mine still reads 0 watts when I pedal standing up on steep hills?
@jhongsucgang59843 ай бұрын
Hi, can someone help me with this? One of the cable guide for the shifter fell off inside the frame😢
@marshallmoussavi72935 ай бұрын
Immediately worked. Class.
@dn5496 ай бұрын
I have a stage potentiometer for MTB which is recognized by my Garmin computer and also by the iPhone in the app, but when pedaling it does not show power on the screens, I have changed a new battery, I have calibrated with the app, but nothing happens
@stuartibbotson71796 ай бұрын
In your costs you forgot the costs for the building regs approval
@MGVELO6 ай бұрын
Oh yeah, make the total £1495. A £25 indemnity insurance policy covered it when I sold it years ago 👍🏻
@stuartibbotson71796 ай бұрын
Remember you do not have to use HETAS you can get building regs to sign it off instead
@youtube_chose_word_for_you8 ай бұрын
you in trouble when you get puncture. i use this once it hell so hard make tire get in and get out.
@jorgemexf Жыл бұрын
I'm sure got dirty 3 hours later
@samvelamamjian5260 Жыл бұрын
Эти колеса лучше? Или Бора Ультра?
@h.p.734 Жыл бұрын
This was extremely helpful! I was getting all worried that I may have to purchase tube liners and all. Thank you so much for sharing!!!
@andrewnelson36812 жыл бұрын
Great job.
@georgeatkins64142 жыл бұрын
Great video. Thanks for sharing your project. What did you stick the firebird with? And which cononay make the boards? Cheers.
@MGVELO2 жыл бұрын
Hi, I used Vitcas heatproof adhesive. Normal board adhesive may well work but thought I’d belt and brace it. I’ve literally just done another log burner a few weeks ago in my new house. Throughly enjoyed it yet again. Didn’t photo document it in as much detail this time. I went with a Portway Arundel XL stove. It has a huge viewing window and more Morden than the previous Stockton 4. Best of luck 👍🏻
@leeallen88402 жыл бұрын
I see you pit a lintel in. Did it not have one? Strange if it didn’t
@MGVELO2 жыл бұрын
It had an arch. I believe it had one above. I put a lintel in purely for levelling off square plus it added a bit more strength not that it needed it. I’ve moved house now and am going to be doing another install on our new house in a couple of months time that’s around 18-20years old which is likely to have its own problems to overcome 👍🏻
@leeallen88402 жыл бұрын
@@MGVELO thanks for that. Very helpful. Good luck with the next one!
@MGVELO2 жыл бұрын
@@leeallen8840 cheers Lee
@olliec13192 жыл бұрын
Thanks, this is great and exactly what I'm planning to do. I have also got ridiculous quotes for this (I'm near Brighton) for what looks like less than a days work for a pro and materials that are not that crazy expensive. I already have a chimney ready to go, I just need a stove put in... You say that if you want a proper job doing then its always best to get he professionals round. I don't agree with this. Often "professionals" are in a hurry, cut corners and have sloppy workmanship. An amateur with attention to detail will often do a better job. Many thanks again
@attybong2 жыл бұрын
what i did was to simply put an electric tape on the inside of the battery cap in order to put little more pressure on the battery against the contact point . . problem likewise solved.
@prlato19742 жыл бұрын
2021 and this is still an issue with the Gen 3. I kept getting dropouts and just weird results and this solved it immediately. Why it this so difficult to fix at the factory? @MG Velo, thank you for solving my problem.
@max_hanma3 жыл бұрын
Smooth job , they go up so quick !
@zodgzod3 жыл бұрын
I had to fit a tube in one of the Strada Biancas at the roadside in December when I hit a rock and got a puncture that sealant couldn’t fix.. I broke two tyre levers getting the bloody thing back on.
@mar1kus3 жыл бұрын
Hello, what ist the weight of these tyre? How is the real width on the rim and what is the inner width of your rim? How is the riding experience?
@austinporter53403 жыл бұрын
I have the same setup. What drives me crazy is how uneven the sound is. Another thing.. Have you ever had problem with a tubless tire (tube inside) that does not align perfectly when put on your rims?
@braveheart07313 жыл бұрын
Hi! I'm using an Ultegra R8000 crank, and was wondering if these are standard (12-15mm) pods will fit based on thickness. Thank you in advance.
@eymeric3 жыл бұрын
Thanks a lot for sharing !!!
@marianoandrespucheta62023 жыл бұрын
HOW NOT TO INSTALL HANDLEBAR TAPE.
@dankpatrol3 жыл бұрын
mounting the tubeless ready version of these on ksyrium elite ust rims today... now on hour 2, questioning my life choices, concerned my neighbours are going to think i'm having a heated domestic dispute
@kamilkurzynowski38362 жыл бұрын
The answer is 3 tire levers (plastic ones) and pray not to brake them in the process. Mounted Strada bianca on my rims, lost tone of skin on my fingers, but I know how to do it, and they are losing 0 pressure in tubeless.
@kingofthekilo3 жыл бұрын
Just taped mine. I think it should be ok, I’ll let you know how it is in a few weeks, I ride a lot
@MiKe-gk7gv3 жыл бұрын
Would you have a video or instructions on how you rerouted internally the cable coming out of the hole on the top frame tube and into the and through the stem?
@TheWellington20063 жыл бұрын
Nice job, great vid.
@MerlinMan15793 жыл бұрын
Definitely worth the effort though.
@KaustubhKokateACEEntrance3 жыл бұрын
Thank You so much for this.
@russellford20693 жыл бұрын
Great Video and really useful advice. You did a fantastic job, it looks really neat. Gonna be doing mine in the new year and your vid' has given me the confidence to tackle it myself.
@LUDO06983 жыл бұрын
Actually I don’t have that problem but maybe you could help me sorting it. I have StagesPower generation 3, a couple of days ago I changed the batteries and in spite of that yesterday I experienced a serious accuracy problem(less watts) and the balance wasn’t right (65-70 on the left). I’m usually good balanced
@stvdxbfinneh1163 жыл бұрын
Where to order this cinelli gel?
@tameemz35953 жыл бұрын
Will this fit an iphone 11? I want it to hold my iphone and car keys.
@mikeb93033 жыл бұрын
Thanks worked for me, now just have to figure out how to get the Connect App working
@magnetman3t7253 жыл бұрын
Are these the SLR wheels in 42mm
@joeyseabrook97653 жыл бұрын
I’m building a Propel up from the Frameset. Can you do me a favor and look underneath your bottom bracket and tell me if there is a screw holding on the cable guide?
@MGVELO3 жыл бұрын
JOey Seabrook I no longer have this bike sorry. I can’t remember if there was or not. Best of luck, they’re awesome machines 👍🏻
@zlatnasto144 жыл бұрын
I have the same bike and wheels, I probably only have half the loudness of yours? Any idea why
@iancruz23044 жыл бұрын
Maybe watch the lizard skins video on how to wrap the bar tape - the figure 8 is the way to go.
@donkeykong50954 жыл бұрын
Thanks for the review! Just got one from MEC...
@davidwong28364 жыл бұрын
so any solution for those who had take out that piece of center piece?
@andyjamestf4 жыл бұрын
Great colours, nice bike
@kelvintcn4 жыл бұрын
Hi ,can help to check the below: 1. Spoke neck type 2. Spoke length 3. Nipple type
@chantsdavidson48664 жыл бұрын
Immediately worked. Haven't been able to calubrate my stages since I bought my 820, second hand, so I thought it was a computer problem. Had the same problems as you displayed in the video as well. This worked immediately. Was able to calibrate my stages first try and it's stayed connected as well
@Panthers0014 жыл бұрын
I am about to change the cables on my propel for the first time and have been searching for what that frame cap on the top tube is. Thanks so much for making this video!
@user-pf5fy8kv3h4 жыл бұрын
nice sounds
@karlmylnere57124 жыл бұрын
Absolutely brilliant tyres, not as hard to fit as some would have it, it just takes a bit of thought and they are a doddle. Best to fit standard tubes first, leave them on for 24 hours then change to latex, they can then be fitted using hands only. They are fast, climb very well and descend even better, the grip is excellent in both wet and dry conditions and the ride is very supple, without doubt t amongst the very best tyres I have used, expensive but look out for discounts and they are worth every penny.
@OVOCNYCHECK3 жыл бұрын
what about puncture protection? do you get any flats? thanks
@karlmylnere57123 жыл бұрын
@@OVOCNYCHECK Had one flat which, in itself says a lot about these tyres as I have ridden them over every type of terrain with minimal problems They are both tough and fast with outstanding grip in all weather's well worth a look, especially if you can get them for a discount.
@obl643 жыл бұрын
Good afternoon, I have problems in the flanks as the zipp wheel cuts them. You had some trouble Which wheels do you use? Greetings
@karlmylnere57123 жыл бұрын
@@obl64 I am using shimano wheels, no trouble at all, sorry to hear that you have had problems, I recommend you try the challenge criterium twenty fives, they should be OK with zipp wheels.
@obl643 жыл бұрын
@@karlmylnere5712 thank you very much for answering me I've already used the 25s but it's the same which shimano model do you use? disc, carbon
@carlosflanders5184 жыл бұрын
Ended up drilling out the top cablestop and running continuous housing all the way to rear derailleur. Giant's design is horrendous with way too many bends and friction and introduces extra spring resistance/slop that is close to impossible to overcome. My local Giant mechanic's solution was Di2 - just gave up.
@mahoneyseanpatrick4 жыл бұрын
Great video! Can I ask: did you get anything signed off by building control or a HETAS certification for the work? DId the chimney sweep sign anything off? Thanks again- looks ace!
@DaddyBear30002 жыл бұрын
I think we can take that as a no. In Scotland you don’t have to I don’t think.
@eddt4304 жыл бұрын
Great video. I've just done mine. You didn't need a lintle. The arched bricks are the lintle. Looks awesome.
@MGVELO4 жыл бұрын
Cheers. I put it in to just square it off as well as offering additional support, though like you say, not needed for that.
@eddt4304 жыл бұрын
@@MGVELO We thought the same but took it up to the arch brick work in the end. . Not sure of the proper name for it.. It's blazing away as I text. Can't beat it on a cold night like this. 👍
@DIYDUB4 жыл бұрын
eddt430 Great to hear mate. Enjoy and Merry Christmas 👍🏻
@davidclough73464 жыл бұрын
Mmmm. Eddt430 - Careful on the assumption that an arch of bricks will be secure. Many years ago when opening up a fireplace in a kitchen the same assumption was made and you have never seen 2 blokes run around so quickly to grab some old joists to shore up the bricks as they started collapsing 😀 They are not expensive - not worth the risk. And make sure you fit them the right way up too.
Пікірлер
I’ve done this, but mine still reads 0 watts when I pedal standing up on steep hills?
Hi, can someone help me with this? One of the cable guide for the shifter fell off inside the frame😢
Immediately worked. Class.
I have a stage potentiometer for MTB which is recognized by my Garmin computer and also by the iPhone in the app, but when pedaling it does not show power on the screens, I have changed a new battery, I have calibrated with the app, but nothing happens
In your costs you forgot the costs for the building regs approval
Oh yeah, make the total £1495. A £25 indemnity insurance policy covered it when I sold it years ago 👍🏻
Remember you do not have to use HETAS you can get building regs to sign it off instead
you in trouble when you get puncture. i use this once it hell so hard make tire get in and get out.
I'm sure got dirty 3 hours later
Эти колеса лучше? Или Бора Ультра?
This was extremely helpful! I was getting all worried that I may have to purchase tube liners and all. Thank you so much for sharing!!!
Great job.
Great video. Thanks for sharing your project. What did you stick the firebird with? And which cononay make the boards? Cheers.
Hi, I used Vitcas heatproof adhesive. Normal board adhesive may well work but thought I’d belt and brace it. I’ve literally just done another log burner a few weeks ago in my new house. Throughly enjoyed it yet again. Didn’t photo document it in as much detail this time. I went with a Portway Arundel XL stove. It has a huge viewing window and more Morden than the previous Stockton 4. Best of luck 👍🏻
I see you pit a lintel in. Did it not have one? Strange if it didn’t
It had an arch. I believe it had one above. I put a lintel in purely for levelling off square plus it added a bit more strength not that it needed it. I’ve moved house now and am going to be doing another install on our new house in a couple of months time that’s around 18-20years old which is likely to have its own problems to overcome 👍🏻
@@MGVELO thanks for that. Very helpful. Good luck with the next one!
@@leeallen8840 cheers Lee
Thanks, this is great and exactly what I'm planning to do. I have also got ridiculous quotes for this (I'm near Brighton) for what looks like less than a days work for a pro and materials that are not that crazy expensive. I already have a chimney ready to go, I just need a stove put in... You say that if you want a proper job doing then its always best to get he professionals round. I don't agree with this. Often "professionals" are in a hurry, cut corners and have sloppy workmanship. An amateur with attention to detail will often do a better job. Many thanks again
what i did was to simply put an electric tape on the inside of the battery cap in order to put little more pressure on the battery against the contact point . . problem likewise solved.
2021 and this is still an issue with the Gen 3. I kept getting dropouts and just weird results and this solved it immediately. Why it this so difficult to fix at the factory? @MG Velo, thank you for solving my problem.
Smooth job , they go up so quick !
I had to fit a tube in one of the Strada Biancas at the roadside in December when I hit a rock and got a puncture that sealant couldn’t fix.. I broke two tyre levers getting the bloody thing back on.
Hello, what ist the weight of these tyre? How is the real width on the rim and what is the inner width of your rim? How is the riding experience?
I have the same setup. What drives me crazy is how uneven the sound is. Another thing.. Have you ever had problem with a tubless tire (tube inside) that does not align perfectly when put on your rims?
Hi! I'm using an Ultegra R8000 crank, and was wondering if these are standard (12-15mm) pods will fit based on thickness. Thank you in advance.
Thanks a lot for sharing !!!
HOW NOT TO INSTALL HANDLEBAR TAPE.
mounting the tubeless ready version of these on ksyrium elite ust rims today... now on hour 2, questioning my life choices, concerned my neighbours are going to think i'm having a heated domestic dispute
The answer is 3 tire levers (plastic ones) and pray not to brake them in the process. Mounted Strada bianca on my rims, lost tone of skin on my fingers, but I know how to do it, and they are losing 0 pressure in tubeless.
Just taped mine. I think it should be ok, I’ll let you know how it is in a few weeks, I ride a lot
Would you have a video or instructions on how you rerouted internally the cable coming out of the hole on the top frame tube and into the and through the stem?
Nice job, great vid.
Definitely worth the effort though.
Thank You so much for this.
Great Video and really useful advice. You did a fantastic job, it looks really neat. Gonna be doing mine in the new year and your vid' has given me the confidence to tackle it myself.
Actually I don’t have that problem but maybe you could help me sorting it. I have StagesPower generation 3, a couple of days ago I changed the batteries and in spite of that yesterday I experienced a serious accuracy problem(less watts) and the balance wasn’t right (65-70 on the left). I’m usually good balanced
Where to order this cinelli gel?
Will this fit an iphone 11? I want it to hold my iphone and car keys.
Thanks worked for me, now just have to figure out how to get the Connect App working
Are these the SLR wheels in 42mm
I’m building a Propel up from the Frameset. Can you do me a favor and look underneath your bottom bracket and tell me if there is a screw holding on the cable guide?
JOey Seabrook I no longer have this bike sorry. I can’t remember if there was or not. Best of luck, they’re awesome machines 👍🏻
I have the same bike and wheels, I probably only have half the loudness of yours? Any idea why
Maybe watch the lizard skins video on how to wrap the bar tape - the figure 8 is the way to go.
Thanks for the review! Just got one from MEC...
so any solution for those who had take out that piece of center piece?
Great colours, nice bike
Hi ,can help to check the below: 1. Spoke neck type 2. Spoke length 3. Nipple type
Immediately worked. Haven't been able to calubrate my stages since I bought my 820, second hand, so I thought it was a computer problem. Had the same problems as you displayed in the video as well. This worked immediately. Was able to calibrate my stages first try and it's stayed connected as well
I am about to change the cables on my propel for the first time and have been searching for what that frame cap on the top tube is. Thanks so much for making this video!
nice sounds
Absolutely brilliant tyres, not as hard to fit as some would have it, it just takes a bit of thought and they are a doddle. Best to fit standard tubes first, leave them on for 24 hours then change to latex, they can then be fitted using hands only. They are fast, climb very well and descend even better, the grip is excellent in both wet and dry conditions and the ride is very supple, without doubt t amongst the very best tyres I have used, expensive but look out for discounts and they are worth every penny.
what about puncture protection? do you get any flats? thanks
@@OVOCNYCHECK Had one flat which, in itself says a lot about these tyres as I have ridden them over every type of terrain with minimal problems They are both tough and fast with outstanding grip in all weather's well worth a look, especially if you can get them for a discount.
Good afternoon, I have problems in the flanks as the zipp wheel cuts them. You had some trouble Which wheels do you use? Greetings
@@obl64 I am using shimano wheels, no trouble at all, sorry to hear that you have had problems, I recommend you try the challenge criterium twenty fives, they should be OK with zipp wheels.
@@karlmylnere5712 thank you very much for answering me I've already used the 25s but it's the same which shimano model do you use? disc, carbon
Ended up drilling out the top cablestop and running continuous housing all the way to rear derailleur. Giant's design is horrendous with way too many bends and friction and introduces extra spring resistance/slop that is close to impossible to overcome. My local Giant mechanic's solution was Di2 - just gave up.
Great video! Can I ask: did you get anything signed off by building control or a HETAS certification for the work? DId the chimney sweep sign anything off? Thanks again- looks ace!
I think we can take that as a no. In Scotland you don’t have to I don’t think.
Great video. I've just done mine. You didn't need a lintle. The arched bricks are the lintle. Looks awesome.
Cheers. I put it in to just square it off as well as offering additional support, though like you say, not needed for that.
@@MGVELO We thought the same but took it up to the arch brick work in the end. . Not sure of the proper name for it.. It's blazing away as I text. Can't beat it on a cold night like this. 👍
eddt430 Great to hear mate. Enjoy and Merry Christmas 👍🏻
Mmmm. Eddt430 - Careful on the assumption that an arch of bricks will be secure. Many years ago when opening up a fireplace in a kitchen the same assumption was made and you have never seen 2 blokes run around so quickly to grab some old joists to shore up the bricks as they started collapsing 😀 They are not expensive - not worth the risk. And make sure you fit them the right way up too.
Hard to find OD 2 stem.