Tomb of 3D Printed Horrors
Tomb of 3D Printed Horrors
The Tomb of 3D Printed Horrors channel is designed to take you from being a complete novice on 3D printing terrain and miniatures at home and turn you into an expert. We will also feature build and painting tutorials, and showcase great models for you to print. We want you to take your Dungeons & Dragons game to the next level, with stunning 3D tabletop miniatures, terrain and scenery!
Пікірлер
Это очень полезно. Спасибо!
My ender 3v3 se has been a nightmare one thing or another been an issue. Got it new about 4 months ago I've waited more for parts then it actually running. I got a used but good neptune 3 pro from elegoo not one issue besides adjusting the wheels and I messes with cura settings too much but it has been a champ and a beast. I think I'm done with creality don't get me started on my ender 3 pro I did every upgrade to it being even worse
Thanks for the help love your videos they are very helpful, and I'm printing miniatures with your A1 settings almost like resin love it :)
I noticed the quality of my prints started to go down and found myself at this video. Thanks!
What about bad thermistors?
Thank you so much for your help❤❤❤
I have a ender 3 v2 neo that i upgraded with sprite pro extruder... it works well for some elements but somehow in others it grind the filament.. all of them pla.. I do not know if the issue is too much tensión or low tensión.. how do I figure it out?
Great video! Loved the extra tips!
Thank you for an awesome tutorial, I don't have my printer yet so I'm off to watch your next video, very informative.
Tom, you are an amazing resource. Thank you for all your hard work, and dedication to our craft!
Hey Tom, question on you choosing .08mm vs. .06mm height on the .20mm nozzle. Do you find the difference is immaterial or issues arise? You're doing such great work and your presentation/public speaking is top notch. Thanks again sir!
.08 will produce cleaner miniatures, .06 does worse on overhangs and has more surface defects.
About to print a castle and you are helping alot
Thanks for walking me thru it
Thanks for the video Tom!
I wish I saw how the nozzle clipped in because I kept clipping it the wrong way and was wondering why the first layers where so bad 🤦♀️
I tried this, and z hop, but the part still got knocked from the table.
Then try slowing down.
Mine doesn’t do that.. 18:15
thank you man
I hate the bed leveling so much, I installed a CR touch and still have so many issues with this printer
Thank yoooouuu, I've been going crazy because of this.. gotta try tomorrow.
Thank you so much been having some issues and now I can’t wait to try this fixes
hi, why ur numbers are all green? a run bed auto lvl and got 3 blues
Reduce nozzle size setting, then the Arachne simplification isn't so drastic. The slicer can think you have a 0.2mm nozzle when you have a 0.4mm one on, there is no harm from that, as long as the perimeter extrusion width is at least 0.42mm for a 0.4mm nozzle. I actually think Bambu/Orca path decimation is way too aggressive in Arachne mode. Also since you're printing miniatures: outer perimeter first, else the existing inner perimeter which is printed earlier will tend to push the outer perimeter out and round it out. Arachne is at a quasai disadvantage since it will be able to put perimeters on sharp features closer together. Yeah i know, overhangs disadvantage. I don't have a perfect solution for you. We need new algorithms.
I'm so glad I found this video. I was about to buy a new extruder. Thank you so much.
thx buddy, fixed it riiight away !
Great video. Without taking it all apart, can you tell if it's not installed correctly? Do you know if Creality corrected their installation process to ensure this doesn't happen? I just got a KE model and it's 9 months later than your video. Thanks
Thanks Tom! I purchased all the items via your website links. Very through procedure, much better than the Bambu Lab instructions and video. Thanks again!
I received my Ender 3 V3 SE yesterday. Assembly was easy and fast. I turned it on and after selecting English as my preferred language, it automatically went into leveling without me having to select it. Leveling was long, but straight forward. I did my first print on the magnetic removable print bed. I don't like that base. I had great difficulty removing my print, and when it did come off, the underside of my print was very very rough, like 80 grit sandpaper. I have an Ender 3 V2 which came with a tempered glass bed and I love that thing so much. I decided to buy the glass bed for the new V3 SE, but had issues installing it. The clips I use on the V2 does not fit on the V3 SE. There is a additional black layer on top of the metal heating base and that makes it too thick for the clips to fit properly. I bought some binder clips at an office supply store to hold the glass bed on, but that makes the leveling procedure difficult, the binder clips interfere with the hot end as it moves across the bed. Bought some smaller 19mm binder clips, which I hope will work.
I start to use Sunlu PLA meta and I noticed there is a stringy issue the whole plate look like a giant spider web, has this happen to you?
Never. Which BL printer are you using?
Bambu A1 Mini
great info thanks
Thank you!
Thank you so much I was so stuck ready to take it back you solved the issues thanks
.
What will be the cause of my printing suddenly grinding the filament.. therefore no filament is pushed in... If I change filament everything is good.
My nozzle is physically against the bed while set to 0.1mm (not negative).
Do you have a profile like this for nozzle 0.04?
Nope
@@Tombof3DPrintedHorrors Would it be a big problem to use your profile on nozzle 0.4?
this video has helped me out alot thank you
I cant get my top left spring to go down enough, is there anything i can do or should i adjust all of them to that level?
I got it
You’re a legend. I’m making a list of supplies for my purchase
Bruh you’re such a legend. Your vids have been my addiction as I’m about to purchase my first 3D Printers
I'm not convinced on using qtips and nylon brush on the Z axis. Is there any other way to Clean it? TIA
I'm not using Q-Tips.
@@Tombof3DPrintedHorrors also tried nylon brush. but still not enough to remove black spots. any other way?
I've commented on very few YT vids, this may be my first one in years. But I cannot explain the frustration this has ended for me. Coupled with some of the other comments about getting a higher bandwidth SD card, this is game changing for my prints. Instant subscribe. My effing hero.
I'm glad it helped! :)
Maybe the thinner wall from the Arachne generator is more subject to Deformation from shrinkage.
Now that you've had a while to test more settings, do you have an updated video for best settings?
I have updated my profile multiple times since this video, you should have gotten an e-mail message notifying you each time if you have downloaded my profiles from DTRPG via the link. I am not doing a new video each time I update settings.
Great video. Thanks a lot.
Awesome -- thanks for the tip! Liked, subcribed and commented! Good stuff.
Awsome job as always! I used your help to set up my Ender 3 four years ago and just got your help to set up my new Ender 3 v3 SE!
Whether it needs to come out, or go in, gently pressing downwards with a fork on the flat side between legs and tube makes The Bowden Tube simple to work with. It also may spark interesting conversations on a dinner date for two if this is done prior to sitting down at the table. Feel free to share your story if this works for you.
thanks!
Thank you, thank you, THANK YOU! I've been pulling my hair out trying to figure out my underextrusion+stringing breakout and even went and bought a direct drive which I ended up returning because I realized it's the coupler that failed and my hotend probably has filament in there from clogs. This is so very concise, very easy to see everything and you have a calm and reassuring tone that helps ease the tension of not knowing what I'm about to do.