IN-DEPTH EQUIPMENT REVIEWS | BEAUTIFUL TRAIL COVERAGE | BUILD ADVICE | As well as covering all aspects of the Jeep and Off Road communities and Lifestyle. It's all right here for you to enjoy.
Was steering getting hard in spots when off roading before the kit? Did the kit resolve that totally?
@ExpeditionBuilds13 күн бұрын
Hey Rubi! With the 37's aired down it was getting bad, I couldn't turn unless I could roll a few feet, which is not always possible offroad. I was also overheating the P.S. fluid. With the Apex installed, I can now turn the wheel while aired down, no issues. It's so seamless, I sometimes forget I'm running it. Definitely recommend!
@NayanSalave-o1s29 күн бұрын
Till ilkk. M nnm No mjkkj johnn ñnjñnnnn of
@DestinationtonowhereАй бұрын
Are they still functioning well?
@ExpeditionBuildsАй бұрын
Hi✌🏻 They have been flawless. Good hearing from you!
@unclebuck6814fulАй бұрын
Thanks
@ExpeditionBuildsАй бұрын
Glad to help!
@unclebuck6814fulАй бұрын
Send me a link please
@ExpeditionBuildsАй бұрын
Here's the link for the Amp'd Throttle Booster. Be sure and order the correct device for your powertrain. www.holley.com/products/tuners_and_programmers/throttle_sensitivity_booster/parts/48868-JL2
@unclebuck6814fulАй бұрын
What height tires and what gears are your gladiator I am 37 and 3.73 gears currently
@ExpeditionBuildsАй бұрын
I have a JL Wrangler on 37" Nitto Ridge Grapplers and running 4.88 gears. This combo got me very close to the stock set-up and works perfectly. You must be really feeling the 37 and 3.73. My JL is a Rubicon, so I was starting with 4:10 gears.
@unclebuck6814fulАй бұрын
I am upgrading to 4.88 and a possi unit in rear .
@unclebuck6814fulАй бұрын
So i drive or peddle commander , i have 2020 jeep gladiator sport
@ExpeditionBuildsАй бұрын
Actually, I want you to consider another device. Check out my video on the Superships Amp'd 2.o Throttle booster. It's my favorite!
@Humberto.wranglerАй бұрын
Does it work in 2024?
@ExpeditionBuildsАй бұрын
Hi Humberto! I spoke with Holley/Superchips about this very topic a couple of weeks back and was told they do not currently offer tuning for the 2024. I just inquired again asking if a 2024 tune is in development. I'll let you know what I hear back.
@ExpeditionBuildsАй бұрын
Hi again, I got a quick reply back from the tech(s) at Holley. Flashcal products and support for the 2024 are available. The tune is in the works. No ETA available yet. For 2024, Jeep is using a new ECM type and Holley/Superchips is working on it. Hopes this helps.
@mamun_seo_specialist_proАй бұрын
This video is excellent but has a low video SEO score.
@mamun_seo_specialist_proАй бұрын
It's a great video, but it doesn't have any tags.
@mamun_seo_specialist_proАй бұрын
The video is great, but it has a small audience.
@FrisellFan01Ай бұрын
Well to say how impressive this is just will not cut it.....this is for me....a big deal... watching this young lady do what she gets done on the trail...is the best....watching her on MORR she gets to be part of recoveries....and welding in the shop and so much more.....I know she has a great future ahead of her.
@ExpeditionBuildsАй бұрын
Well said! Great hearing from you✌🏻
@yipmabaruya1148Ай бұрын
Good morning from Papua New Guinea
@yipmabaruya1148Ай бұрын
Good morning from Papua New Guinea. I enjoyed watching your contents.
@ExpeditionBuildsАй бұрын
Good evening! So good hearing from you and great to hear your comments.
@ZachAttack.23Ай бұрын
I know I’m 3 years late. But better late than never !!!. Just ordered a set of falcon 3.3s , metalcloak long arm upgrade and fox 2.0 bumpstops. After 3 years with the fox bumpstops how are you liking them ?
@ExpeditionBuildsАй бұрын
Hey Zach, great hearing from you! You going to love the 3.3's/MC long arm/Fox 2.0 Bumpstops. The Bumpstops have performed perfectly, definitely recommend them.
@elviejito401Ай бұрын
Where did u get the plate mount? Nice video
@ExpeditionBuildsАй бұрын
Hi and good hearing from you! I assume you are asking about the winch mount plate? That is from Artec Industries.
@elviejito401Ай бұрын
Sorry i mean the license plate mount
@ExpeditionBuildsАй бұрын
@@elviejito401 Ahh, ok. The license plate mount is from Maximus-3. Here's a lnk: maximus-3.com/home/jl-jt-stealth-front-license-plate-bracket-frame
@VivianauxitoАй бұрын
What an excellent review and vid! Just straight to the point with everything! We released a portable Jump starter. Are you interested in giving a review?
@ExpeditionBuildsАй бұрын
Thank you, really appreciate the compliment. Yes, I would love to discuss doing a product review on your portable Jump Starter. Please reach out to me via email. Talk soon.
@VivianauxitoАй бұрын
@@ExpeditionBuilds Just did it, Look forward to hearing from you
@davidbautista96792 ай бұрын
Any idea why battery keeps dying when I have steps turn off? Even when I don’t drive the jeep for a week.
@ExpeditionBuilds2 ай бұрын
Hi David. Did this just start? Any other symptoms? Let me know if you can provide more info. I can reach out to RSE. Have you spoken with RSE about this?
@davidbautista96792 ай бұрын
No it’s all the symptoms. Been doing it ever since I got them installed. Went to the shop and said I gotta keep battery on charge if I ever leave it that long. I emailed them… got no response from RSE
@davidbautista96792 ай бұрын
Has it now I pulled out the fuse from the steps.
@ExpeditionBuilds2 ай бұрын
@@davidbautista9679 Ok, I'm going to reach out to them and see if we can get you some help on this. A little more info would help. Are these Gen 2, Gen 3? What Jeep are they on, JK or JL? How long have they been on your Jeep?
@davidbautista96792 ай бұрын
@@ExpeditionBuilds GEN 3 on a JKU 9 months.
@faniadhikary38262 ай бұрын
You are a very good content creator. But you are not getting what you deserve because your video is not SEO-optimized. That's for your video is not getting more views, likes, and subscribers. If you want your channel to grow then it must be focused on your video SEO section. This matter I am helping you if you want.
@FailureToReport2 ай бұрын
Sick MetalCloak ad .... Would have been nice to have a video showing it's use vs just reading a brochure.
@ExpeditionBuilds2 ай бұрын
Hi, and good hearing from you. I intentionally left specifics out of the video, things like how much toe in or toe out as rigs are set up differently. I thought one could see how to use it pretty well from the video I presented.
@debeshbhattarai2 ай бұрын
Bumped into your channel through an Ad, Shall dig into it for your adventure stories, many thanks...!
@ExpeditionBuilds2 ай бұрын
Thank you! Great hearing from you.
@tazzeltazzel29252 ай бұрын
I like these but I can see the snow packing into that pocket.
@ExpeditionBuilds2 ай бұрын
Hi, great hearing from you! That can definitely happen. I do love how the raised areas keep your feet above the wet/mess.
@user-lw4nm1ey9y2 ай бұрын
Love it bro
@ExpeditionBuilds2 ай бұрын
Thanks, great hearing from you!
@Belangoy2 ай бұрын
Kuda yang gagah mantap👍👍❤️❤️
@ExpeditionBuilds2 ай бұрын
❤🙏🏼
@robertrubi46932 ай бұрын
❤️❤️❤️❤️❤️❤️❤️❤️❤️
@ExpeditionBuilds2 ай бұрын
Thank You!!!
@ghernandez64572 ай бұрын
Getting them cooler screws started was PITA like no other. I swear the new design saves you time by not having to remove your front bumper and grill, but man getting the screws on takes about as much time. Instructions say to remove the sandwich plate and put back just the HP line. Is it ok if I leave mine on?
@ExpeditionBuilds2 ай бұрын
Apologies for not getting back to you sooner, we've been out shooting content. Agree, those cooler screws are tough. That shouldn't be an issue leaving the sandwich plate on. Do you feel you want to reach out to Apex for verification on this?
@ghernandez64572 ай бұрын
@@ExpeditionBuilds No worries you replied within a day that is actually pretty fast. The instruction manual says to remove the sandwich plate and install the HP line by itself, but why is there a need to trim the mounting bracket if that's the case? I think they are contradicting themselves here. I am just gonns leave it as it is.
@ExpeditionBuilds2 ай бұрын
@@ghernandez6457 Sorry I don't have an answer as to why the instructions ask for the sandwich plate removal? If you feel good about your install, roll with it.
@MountainGurkha142 ай бұрын
Very good Job Keep it Up 💯❤👍🙏 New Subscribe
@ExpeditionBuilds2 ай бұрын
Thank you for your comment and we truly appreciate your support🙏🏼
@MountainGurkha142 ай бұрын
@@ExpeditionBuilds God Bless You
@DankBruv2 ай бұрын
This is one of the most cinematic videos I've ever seen, you deserve loads of subscribes for the effort you put in
@ExpeditionBuilds2 ай бұрын
Wow, what a great compliment! Really appreciate hearing from you.We continue to push ourselves to keep putting out high level content.
@DankBruv2 ай бұрын
@@ExpeditionBuilds Hopefully the next one will be even better than this one.
@ExpeditionBuilds2 ай бұрын
@@DankBruv We'll give it our best. Be well!
@00ninja002 ай бұрын
What brand of side signal/marker lights are those on your jeep? I love these, I want exactly this style. I want to get rid of the oem, and the part that hangs down in the front below the side lights, but I didn’t want to remove the fender lining and the lower portion like everyone else does when they run these new blinker markers. Please let me know what these are, thanks!!!
@ExpeditionBuilds2 ай бұрын
Hi, and great hearing from you! I am running the Rugged Ridge Fender chop kit. I chose this kit because it allows me to keep the inner fender liners as well as the black edge trim. Also look at the new fender chop light from American Adventure Labs. Let me know if you have trouble locating those, I may be able to help.
@00ninja002 ай бұрын
@@ExpeditionBuilds thank you so much for the response. I’ll look it up, if I have issues finding it, I’ll let u know. Thanks for the help.
@danielisojiq55692 ай бұрын
Great video, but your thumbnail isn't very inviting.
@ExpeditionBuilds2 ай бұрын
Hi Daniel, great hearing from you! Let me see if we can make the thumbnail more inviting. Really appreciate the feedback.
@ExpeditionBuilds2 ай бұрын
Hi, updated the thumbnail. Thoughts?
@LyLy-262 ай бұрын
you are great
@ExpeditionBuilds2 ай бұрын
Wow, thank you!
@markb31292 ай бұрын
Will these mud guards fit my 2023 HighTide Wrangler Jl it has the extreme recon package also? Any help for the ones that fit the rear would be great. ✌🏻
@ExpeditionBuilds2 ай бұрын
Hi Mark! Yes, they should fit your Extreme Recon. Good hearing from you✌🏻
@markb31292 ай бұрын
@@ExpeditionBuilds which ones do I need for the rear, your video showed you drilling the rivets but no install. ✌🏻
@GiangThimay-19942 ай бұрын
hello
@ExpeditionBuilds2 ай бұрын
Hello!
@rickyricardopro2 ай бұрын
Looking to do this to my Jeep, what was your cost? I’m a little confused on how I would get the PCM. Thanks in advance!
@ExpeditionBuilds2 ай бұрын
Hi. The tuner cost is ~ $540.00. A couple of ways to do this. Follow the instructions on the Superchips website. - Send your PCM to them to be unlocked. They send it back with the new tune. - Buy a new PCM (with tune) and keep you stock PCM (+$600.00) Let me know if you have any additional questions, glad to help.
@bcraftmath2 ай бұрын
6 months down the road... Still happy with it?
@ExpeditionBuilds2 ай бұрын
Hey Brandon, good hearing from you! Yes, performing perfectly. I can recommend this mod👍🏻
@bcraftmath2 ай бұрын
@@ExpeditionBuilds This still work for the 2024 model? I thought I heard somewhere that these no longer work for some of newer models, but I may have dreamt that. Haha Great video btw!
@ExpeditionBuilds2 ай бұрын
@@bcraftmath I'm not sure about whether or not this tune works on the 2024? I plan on checking in with Superchips next week and I'll ask about the status for the 2024. Thanks for the compliment on the video✌🏻
@bcraftmath2 ай бұрын
@@ExpeditionBuildsI'd appreciate that! I don't see a flashpaq fire my 24 4xe 2.0, but man of love something like this to get a lil more umph from the bottom.
@ExpeditionBuilds2 ай бұрын
@@bcraftmath I'll let you know what I hear.
@RohitKhajuria-rw6me2 ай бұрын
❤ to hb
@BindhuV-bs9dk2 ай бұрын
,,p
@ChrisVoight-mb7ub3 ай бұрын
Can you add links for the bumper guard / bull bar and the light
@ExpeditionBuilds3 ай бұрын
Hi Chris! I just added the link(s) in the description. Good hearing from you.
@MuzammilMehmoodvlogs3 ай бұрын
very informative video bro
@ExpeditionBuilds3 ай бұрын
Thanks brother!
@mohamedassouqi19843 ай бұрын
Do you sell second hand vehicles or has a recommendation
@ExpeditionBuilds3 ай бұрын
Hi, we will occasionally sell a vehicle if we are upgrading or starting a new build. Maybe check Autotrader.
@yipmabaruya11483 ай бұрын
Good night from Papua New Guinea.
@ExpeditionBuilds3 ай бұрын
Good night! Great hearing from you.
@user-nu2no5lm4k20 күн бұрын
❤❤🎉❤😅😊😊😅😊😅
@IMBewildered3 ай бұрын
You probably didn't know that Danielle has also picked up litter in Italy!😊
@ExpeditionBuilds3 ай бұрын
That doesn't surprise me at all🌞
@supermomdg3 ай бұрын
😆 so very true!
@RicardoGonzalez-ww3ov3 ай бұрын
Keep it up Danielle ! I have the same issue in Arizona lots of garbage on the trails , we get a lot from target shooters that bring out items to shoot and never take back home plus illegal dumpers and being close to the border I can fill up my truck bed with clothing and 1 gallon black water bottles left behind by drug smugglers and migrants . If anyone can find a use for millions of plastic 1 gallon jugs I got you covered
@ExpeditionBuilds3 ай бұрын
Hello Ricardo, good hearing from you! I appreciate your personal efforts in helping to clean up after those who see fit to litter. We all have a part to play in this. Be well friend.
@supermomdg3 ай бұрын
Hey bro! Let's plan a clean up down in Arizona this next winter!
@pohl2183 ай бұрын
I will copy your install. Very clean and professional. Thanks for the video.
@ExpeditionBuilds3 ай бұрын
Excellent, good hearing from you✌🏻
@javontinslet51813 ай бұрын
Great review and install guide. It was so helpful for first-time users like myself
Пікірлер
Nice shering
Jnh
Polices
0:29
Was steering getting hard in spots when off roading before the kit? Did the kit resolve that totally?
Hey Rubi! With the 37's aired down it was getting bad, I couldn't turn unless I could roll a few feet, which is not always possible offroad. I was also overheating the P.S. fluid. With the Apex installed, I can now turn the wheel while aired down, no issues. It's so seamless, I sometimes forget I'm running it. Definitely recommend!
Till ilkk. M nnm No mjkkj johnn ñnjñnnnn of
Are they still functioning well?
Hi✌🏻 They have been flawless. Good hearing from you!
Thanks
Glad to help!
Send me a link please
Here's the link for the Amp'd Throttle Booster. Be sure and order the correct device for your powertrain. www.holley.com/products/tuners_and_programmers/throttle_sensitivity_booster/parts/48868-JL2
What height tires and what gears are your gladiator I am 37 and 3.73 gears currently
I have a JL Wrangler on 37" Nitto Ridge Grapplers and running 4.88 gears. This combo got me very close to the stock set-up and works perfectly. You must be really feeling the 37 and 3.73. My JL is a Rubicon, so I was starting with 4:10 gears.
I am upgrading to 4.88 and a possi unit in rear .
So i drive or peddle commander , i have 2020 jeep gladiator sport
Actually, I want you to consider another device. Check out my video on the Superships Amp'd 2.o Throttle booster. It's my favorite!
Does it work in 2024?
Hi Humberto! I spoke with Holley/Superchips about this very topic a couple of weeks back and was told they do not currently offer tuning for the 2024. I just inquired again asking if a 2024 tune is in development. I'll let you know what I hear back.
Hi again, I got a quick reply back from the tech(s) at Holley. Flashcal products and support for the 2024 are available. The tune is in the works. No ETA available yet. For 2024, Jeep is using a new ECM type and Holley/Superchips is working on it. Hopes this helps.
This video is excellent but has a low video SEO score.
It's a great video, but it doesn't have any tags.
The video is great, but it has a small audience.
Well to say how impressive this is just will not cut it.....this is for me....a big deal... watching this young lady do what she gets done on the trail...is the best....watching her on MORR she gets to be part of recoveries....and welding in the shop and so much more.....I know she has a great future ahead of her.
Well said! Great hearing from you✌🏻
Good morning from Papua New Guinea
Good morning from Papua New Guinea. I enjoyed watching your contents.
Good evening! So good hearing from you and great to hear your comments.
I know I’m 3 years late. But better late than never !!!. Just ordered a set of falcon 3.3s , metalcloak long arm upgrade and fox 2.0 bumpstops. After 3 years with the fox bumpstops how are you liking them ?
Hey Zach, great hearing from you! You going to love the 3.3's/MC long arm/Fox 2.0 Bumpstops. The Bumpstops have performed perfectly, definitely recommend them.
Where did u get the plate mount? Nice video
Hi and good hearing from you! I assume you are asking about the winch mount plate? That is from Artec Industries.
Sorry i mean the license plate mount
@@elviejito401 Ahh, ok. The license plate mount is from Maximus-3. Here's a lnk: maximus-3.com/home/jl-jt-stealth-front-license-plate-bracket-frame
What an excellent review and vid! Just straight to the point with everything! We released a portable Jump starter. Are you interested in giving a review?
Thank you, really appreciate the compliment. Yes, I would love to discuss doing a product review on your portable Jump Starter. Please reach out to me via email. Talk soon.
@@ExpeditionBuilds Just did it, Look forward to hearing from you
Any idea why battery keeps dying when I have steps turn off? Even when I don’t drive the jeep for a week.
Hi David. Did this just start? Any other symptoms? Let me know if you can provide more info. I can reach out to RSE. Have you spoken with RSE about this?
No it’s all the symptoms. Been doing it ever since I got them installed. Went to the shop and said I gotta keep battery on charge if I ever leave it that long. I emailed them… got no response from RSE
Has it now I pulled out the fuse from the steps.
@@davidbautista9679 Ok, I'm going to reach out to them and see if we can get you some help on this. A little more info would help. Are these Gen 2, Gen 3? What Jeep are they on, JK or JL? How long have they been on your Jeep?
@@ExpeditionBuilds GEN 3 on a JKU 9 months.
You are a very good content creator. But you are not getting what you deserve because your video is not SEO-optimized. That's for your video is not getting more views, likes, and subscribers. If you want your channel to grow then it must be focused on your video SEO section. This matter I am helping you if you want.
Sick MetalCloak ad .... Would have been nice to have a video showing it's use vs just reading a brochure.
Hi, and good hearing from you. I intentionally left specifics out of the video, things like how much toe in or toe out as rigs are set up differently. I thought one could see how to use it pretty well from the video I presented.
Bumped into your channel through an Ad, Shall dig into it for your adventure stories, many thanks...!
Thank you! Great hearing from you.
I like these but I can see the snow packing into that pocket.
Hi, great hearing from you! That can definitely happen. I do love how the raised areas keep your feet above the wet/mess.
Love it bro
Thanks, great hearing from you!
Kuda yang gagah mantap👍👍❤️❤️
❤🙏🏼
❤️❤️❤️❤️❤️❤️❤️❤️❤️
Thank You!!!
Getting them cooler screws started was PITA like no other. I swear the new design saves you time by not having to remove your front bumper and grill, but man getting the screws on takes about as much time. Instructions say to remove the sandwich plate and put back just the HP line. Is it ok if I leave mine on?
Apologies for not getting back to you sooner, we've been out shooting content. Agree, those cooler screws are tough. That shouldn't be an issue leaving the sandwich plate on. Do you feel you want to reach out to Apex for verification on this?
@@ExpeditionBuilds No worries you replied within a day that is actually pretty fast. The instruction manual says to remove the sandwich plate and install the HP line by itself, but why is there a need to trim the mounting bracket if that's the case? I think they are contradicting themselves here. I am just gonns leave it as it is.
@@ghernandez6457 Sorry I don't have an answer as to why the instructions ask for the sandwich plate removal? If you feel good about your install, roll with it.
Very good Job Keep it Up 💯❤👍🙏 New Subscribe
Thank you for your comment and we truly appreciate your support🙏🏼
@@ExpeditionBuilds God Bless You
This is one of the most cinematic videos I've ever seen, you deserve loads of subscribes for the effort you put in
Wow, what a great compliment! Really appreciate hearing from you.We continue to push ourselves to keep putting out high level content.
@@ExpeditionBuilds Hopefully the next one will be even better than this one.
@@DankBruv We'll give it our best. Be well!
What brand of side signal/marker lights are those on your jeep? I love these, I want exactly this style. I want to get rid of the oem, and the part that hangs down in the front below the side lights, but I didn’t want to remove the fender lining and the lower portion like everyone else does when they run these new blinker markers. Please let me know what these are, thanks!!!
Hi, and great hearing from you! I am running the Rugged Ridge Fender chop kit. I chose this kit because it allows me to keep the inner fender liners as well as the black edge trim. Also look at the new fender chop light from American Adventure Labs. Let me know if you have trouble locating those, I may be able to help.
@@ExpeditionBuilds thank you so much for the response. I’ll look it up, if I have issues finding it, I’ll let u know. Thanks for the help.
Great video, but your thumbnail isn't very inviting.
Hi Daniel, great hearing from you! Let me see if we can make the thumbnail more inviting. Really appreciate the feedback.
Hi, updated the thumbnail. Thoughts?
you are great
Wow, thank you!
Will these mud guards fit my 2023 HighTide Wrangler Jl it has the extreme recon package also? Any help for the ones that fit the rear would be great. ✌🏻
Hi Mark! Yes, they should fit your Extreme Recon. Good hearing from you✌🏻
@@ExpeditionBuilds which ones do I need for the rear, your video showed you drilling the rivets but no install. ✌🏻
hello
Hello!
Looking to do this to my Jeep, what was your cost? I’m a little confused on how I would get the PCM. Thanks in advance!
Hi. The tuner cost is ~ $540.00. A couple of ways to do this. Follow the instructions on the Superchips website. - Send your PCM to them to be unlocked. They send it back with the new tune. - Buy a new PCM (with tune) and keep you stock PCM (+$600.00) Let me know if you have any additional questions, glad to help.
6 months down the road... Still happy with it?
Hey Brandon, good hearing from you! Yes, performing perfectly. I can recommend this mod👍🏻
@@ExpeditionBuilds This still work for the 2024 model? I thought I heard somewhere that these no longer work for some of newer models, but I may have dreamt that. Haha Great video btw!
@@bcraftmath I'm not sure about whether or not this tune works on the 2024? I plan on checking in with Superchips next week and I'll ask about the status for the 2024. Thanks for the compliment on the video✌🏻
@@ExpeditionBuildsI'd appreciate that! I don't see a flashpaq fire my 24 4xe 2.0, but man of love something like this to get a lil more umph from the bottom.
@@bcraftmath I'll let you know what I hear.
❤ to hb
,,p
Can you add links for the bumper guard / bull bar and the light
Hi Chris! I just added the link(s) in the description. Good hearing from you.
very informative video bro
Thanks brother!
Do you sell second hand vehicles or has a recommendation
Hi, we will occasionally sell a vehicle if we are upgrading or starting a new build. Maybe check Autotrader.
Good night from Papua New Guinea.
Good night! Great hearing from you.
❤❤🎉❤😅😊😊😅😊😅
You probably didn't know that Danielle has also picked up litter in Italy!😊
That doesn't surprise me at all🌞
😆 so very true!
Keep it up Danielle ! I have the same issue in Arizona lots of garbage on the trails , we get a lot from target shooters that bring out items to shoot and never take back home plus illegal dumpers and being close to the border I can fill up my truck bed with clothing and 1 gallon black water bottles left behind by drug smugglers and migrants . If anyone can find a use for millions of plastic 1 gallon jugs I got you covered
Hello Ricardo, good hearing from you! I appreciate your personal efforts in helping to clean up after those who see fit to litter. We all have a part to play in this. Be well friend.
Hey bro! Let's plan a clean up down in Arizona this next winter!
I will copy your install. Very clean and professional. Thanks for the video.
Excellent, good hearing from you✌🏻
Great review and install guide. It was so helpful for first-time users like myself
Hi Jevon, great to hear the video helped. .