Пікірлер

• 
  @danielmcchannelКүн бұрын

  Woke up this morning to an awful smell of burnt plastic. Found my kids snack lid completely melted down around a 4 inch section of the heating element. I guess the Kitchen Aid Pro Dry selection really melted that sucker down. This video did the trick! Thanks for the suggestion. Now, to get the stench out of the house…

• 
  @hillbillyhowtosКүн бұрын

  @@danielmcchannel I'm glad it helped. Good luck! 😁

• 
  @isabelcalderas700612 күн бұрын

  Thank you that was very helpful

• 
  @hillbillyhowtos12 күн бұрын

  👍

• 
  @AlexRodriguez-cd1mg13 күн бұрын

  Thanks a lot your video was on point , very helpful !!!

• 
  @hillbillyhowtos12 күн бұрын

  @@AlexRodriguez-cd1mg Thanks!

• 
  @JCDIII13 күн бұрын

  I like the turkey call at 4:52

• 
  @hillbillyhowtos12 күн бұрын

  @@JCDIII lol. Thanks.

• 
  @JeffDeMoine15 күн бұрын

  I have the same framing gun #900420 but the fuel cells do not have the adapter they show on the packaging. What am I missing here?

• 
  @hillbillyhowtos14 күн бұрын

  @JeffDeMoine Are you able to remove the adapter from one of your old fuel cells and put it on the new fuel cell? Just trying to think of a solution for you if it didn't come with the correct adapter.

• 
  @JeffDeMoine12 күн бұрын

  @@hillbillyhowtos Thanks for responding! I have the original black adapter and empty red fuel cell and put the adapter on a new fuel cell but would not work. The gun works as there was a little fuel left from the red cell ( which was pretty old) but no luck with the new cell.

• 
  @hillbillyhowtos12 күн бұрын

  @@JeffDeMoine Weird. If the new cell matches the old cell exactly, then it makes me think you randomly got a bad cell. The only way to know for sure is try another new cell. Good luck!

• 
  @JeffDeMoine11 күн бұрын

  @@hillbillyhowtos Do you know if the the adapters they have been using (orange ones) are the same as the original black ones that i have? Curious if they may have changed them slightly... Appreciate your responses!!

• 
  @shanegailley8291Ай бұрын

  Worked great thanks

• 
  @hillbillyhowtos29 күн бұрын

  Awesome!

• 
  @ProjectGreenfieldАй бұрын

  Literally exactly what was needed. Thanks!

• 
  @hillbillyhowtosАй бұрын

  Awesome! 👍

• 
  @djacob7Ай бұрын

  Very helpful thanks. I didn't have to turn off the printer. As soon as I opened the ink door the cartridges moved into place.

• 
  @hillbillyhowtosАй бұрын

  I'm glad it helped you!

• 
  @KH-fu7gb24 күн бұрын

  Mine too but I keep getting an orange light 😢

• 
  @emiliorodriguez61Ай бұрын

  Thanks for this!

• 
  @hillbillyhowtosАй бұрын

  You are Welcome!

• 
  @okbeaselyАй бұрын

  Your solution works on a I have a 2012 Nissan Murano. Thanks you

• 
  @hillbillyhowtosАй бұрын

  That's Great!

• 
  @teelink204Ай бұрын

  I've gotten the error a few times and the fix from the video has helped every time. Haven't had to buy more color ink.

• 
  @hillbillyhowtosАй бұрын

  That's Great! 👍

• 
  @olabisioladimeji6875Ай бұрын

  Thank you,God bless I got it.its working now

• 
  @hillbillyhowtosАй бұрын

  I'm glad it worked! 😁

• 
  @whywoulditellyou00Ай бұрын

  Does that handle fold in or does it always stick out?

• 
  @aiden-wu2wr2 ай бұрын

  I respect the hard work and dedication

• 
  @hillbillyhowtos2 ай бұрын

  Thanks! 👍

• 
  @monaliza56212 ай бұрын

  Thank you. This is short and concise, and really helpful.

• 
  @hillbillyhowtos2 ай бұрын

  I'm glad it helped you. 👍

• 
  @johnledford62852 ай бұрын

  Such a great invention! Great video.

• 
  @hillbillyhowtos2 ай бұрын

  Thanks. 😁

• 
  @johnledford62852 ай бұрын

  Great job man and that looks amazing! Can’t wait to see the rest of it!

• 
  @hillbillyhowtos2 ай бұрын

  Thanks.

• 
  @liamwilson75802 ай бұрын

  Thank you! This helped so much!

• 
  @hillbillyhowtos2 ай бұрын

  I'm glad it helped. 👍

• 
  @jojopoutine69082 ай бұрын

  Thanks!!!!

• 
  @hillbillyhowtos2 ай бұрын

  You're welcome!

• 
  @Floraclaw2 ай бұрын

  Thank you so much, you would think in the instruction manual it would tell you how to do that.

• 
  @hillbillyhowtos2 ай бұрын

  Yep. You're welcome!

• 
  @Ariasam952 ай бұрын

  Hey man appreciate this video, we had a bit of a struggle turning it on your video helped so a big thanks coming at ya from Texas

• 
  @hillbillyhowtos2 ай бұрын

  I'm glad it helped! 👍

• 
  @dkwild72502 ай бұрын

  Finally a video showing me the style of turn over ball I have. 😊

• 
  @hillbillyhowtos2 ай бұрын

  👍

• 
  @michaelfreeman6812 ай бұрын

  Thank you very much

• 
  @hillbillyhowtos2 ай бұрын

  👍

• 
  @ginathomas85472 ай бұрын

  Where do you get the prung from

• 
  @shawbrothersgirl27402 ай бұрын

  Okay I have an update so the printer the Canon TS 3522 I believe its 275 cartridge it's printing color but it's not printing all black that's crazy is there any way to fix this

• 
  @hillbillyhowtos2 ай бұрын

  Was it an off-brand ink cartridge? I have heard of this happening randomly with some off-brand cartridges.

• 
  @shawbrothersgirl27402 ай бұрын

  Hey can you help me your video helped I have the Canon TS 3522 however the ink refill worked a couple times but now it's printing blanks after I refilled it last night any tips on how to fix this please reply ASAP thank you please note I clicked the reset button held at 3 seconds and I also held down the stop button turn the printer on and off and I also held the printer cartridge against a paper to see if any ink is coming out and the part on the cartridge that looks like a film strip yeah I pressed that against a tissue paper to see if any ink comes out and the ink lines black and the color comes out fine so I don't know why it's not printing help me out please thank you

• 
  @shawbrothersgirl27402 ай бұрын

  Okay I have an update so the printer the Canon TS 3522 I believe its 275 cartridge it's printing color but it's not printing all black that's crazy is there any way to fix this

• 
  @TakayasMom2 ай бұрын

  Thanks. It was driving me nuts trying to catch that thing.

• 
  @hillbillyhowtos2 ай бұрын

  😄👍

• 
  @JakebrakeDavian2 ай бұрын

  Thank you really helpfull, change in 1 min..

• 
  @hillbillyhowtos2 ай бұрын

  Awesome! You're welcome!

• 
  @MrWastingmytime592 ай бұрын

  I used a pneumatic die grinder with a 3" cutting disc from Harbor Freight and it worked fine, took about 30 seconds per cut on 5/8" rebar. You only need to cut about 1/2 through all the way along the perimeter of bar and you can snap it off from there.

• 
  @hillbillyhowtos2 ай бұрын

  That will also work! 👍

• 
  @mohammeddawood13052 ай бұрын

  What if this comes again light ?

• 
  @hillbillyhowtos2 ай бұрын

  Repeat the steps. If it comes back after a 2nd time then you might have to get it checked out.

• 
  @kevinchen24923 ай бұрын

  Would this work for a 1/2" grade 60 rebar?

• 
  @hillbillyhowtos3 ай бұрын

  I think it would work, but it's going to be very difficult to close the cutters. You will probably need to push them against the ground or get some pieces of pipe to extend the handles to get more leverage. Good luck!

• 
  @twopassionsfishing3863 ай бұрын

  Got a ? For ya friend how often do you fish off the cherry grove pier , my family and I are going to be there last week of May and stay ima condo a family vocation, I thought if you were near by we could meet up And you can give my kids a training on fishing off the pier

• 
  @hillbillyhowtos3 ай бұрын

  I use to fish there for a week or two every year but I haven't been there in a while. A hurricane hit the pier a few years ago which shortened the pier. So I have been going to other areas recently. I still think your kids will enjoy fishing off the pier. It's a lot easier than fishing from the beach. Also, the public cherry grove pier is really close and affordable to fish off it. Make sure you park in the garage across the street. It's free to park in it but its expensive to park in the lot beside the pier. Good luck!

• 
  @hillbillyhowtos3 ай бұрын

  Sorry. I just read your comment again. I was referring to the private sea cabin pier in cherry grove that got hit by the hurricane and got shortened.

• 
  @places.letsgeaux.66683 ай бұрын

  I put a fresh ink cartridge in mine. But it immediately said I did not have color and then I was low on color. Has this happened to anyone else?

• 
  @barkydogable3 ай бұрын

  Thanks. Mine went right to the middle when I turned it on so np. Wouldn't have thought to unplug it if needed.

• 
  @Sno10013 ай бұрын

  Where do you get the part?

• 
  @hillbillyhowtos3 ай бұрын

  You will need to check a local appliance store. I got mine at Patterson's but I think it's a local chain.

• 
  @MichaelGillBranion3 ай бұрын

  THANK YOU!!!

• 
  @hillbillyhowtos3 ай бұрын

  You're welcome!

• 
  @KanDog3 ай бұрын

  Great video, I have to admit it was surprising to see electric chainsaw.

• 
  @hillbillyhowtos3 ай бұрын

  I know, when I bought it I didn't give it much hope. I have used it a lot and I would buy another one, it has really been handy for small jobs.

• 
  @KanDog3 ай бұрын

  I am going to look closer at the electric version as it seemed to handle the task, or perhaps it was the person using it. 🙂

• 
  @b-rare3 ай бұрын

  So I bought a 42” cutter not the same one but it worked very well thanks for sharing this video . Before I’d be there with a grinder for years . This did it fast. Thank you

• 
  @hillbillyhowtos3 ай бұрын

  👍

• 
  @DMarie-yx4cj3 ай бұрын

  LOVE your video. How do I remove the smell. Severe asthmatic.

• 
  @hillbillyhowtos3 ай бұрын

  If you get it all off the smell should go away pretty fast. Unfortunately it has to wear off on its on.

• 
  @suspect24843 ай бұрын

  It help thank you I did it 🔥💪🏼

• 
  @hillbillyhowtos3 ай бұрын

  Great!

• 
  @AndyEightSevenFive3 ай бұрын

  The algorithm put this in front of me for some reason, so i clicked... Not gonna lie, when i saw the channel name I expected controled chaos and/or the entire truck being pulled away from the ball piece by piece, haha.... Otherwise though.... Great, straightforward and to the point video. No unnecessary background music or rambling on with nonsense. Good clear and steady camerawork on top of that.... i miss this kind of tutorial type video these days. Two questions..... What's a gooseball doing on a half-ton? And Are those Goodyear AT Adventures?

• 
  @hillbillyhowtos3 ай бұрын

  Thanks for the feedback! The gooseball was on the truck when I bought it. I also asked why a gooseball was on a half-ton, no one knows. LOL. The tires are an off brand, also on the truck when I bought it but I really like them.

• 
  @dontwantnospam3 ай бұрын

  what make of truck is this for?

• 
  @hillbillyhowtos3 ай бұрын

  Ford 150

• 
  @b-rare3 ай бұрын

  where do u buy this tool

• 
  @hillbillyhowtos3 ай бұрын

  I bought it at Harbor Freight.

• 
  @CharlieBahr3 ай бұрын

  Great tips!! FYI It’s three-eights, not three and an eighth. Etc.

• 
  @caronitaclark40583 ай бұрын

  Thank you, sir.

• 
  @hillbillyhowtos3 ай бұрын

  I'm glad it helped. 😀

• 
  @sheridell58063 ай бұрын

  Thank you so much!!!! 🙂

• 
  @hillbillyhowtos3 ай бұрын

  You're welcome! 👍

• 
  @theslimdavylp233 ай бұрын

  I think yours is flawed. When I open the front it moves to the middle on its own lol Or maybe they made an update

• 
  @hillbillyhowtos3 ай бұрын

  I'm not sure if they made an update or just a certain percentage of them are flawed. Either way I have gotten a lot of comments from people having the same problem so it must be a lot of them flawed. Lol.

• 
  @tobrinajolly37143 ай бұрын

  Thank you so much!! It worked perfectly!!

• 
  @hillbillyhowtos3 ай бұрын

  Great! Your Welcome!

• 
  @sybilroberts81713 ай бұрын

  I was today years old when I found out how to change this ink cartridge 😅 tyvm

• 
  @bigsid19843 ай бұрын

  Great video

• 
  @hillbillyhowtos3 ай бұрын

  Thank you!