Black Swamp Outdoors is based on reviews of hunting and outdoor equipment. We cover new boxing reviews, as well as tested gear and ratings. Thanks for watching! [email protected]
Summit City Bullets Hi-Tek coated 147gr, my subsonic hand loads
@ElfstersRiflesandReloading3 күн бұрын
Fantastic video
@blackswampoutdoors48503 күн бұрын
Thank you for watching!
@ubacgraffs4 күн бұрын
Thanks for the video first of all. Regarding the holster clips, I thought the same thing as you. Couldn't believe that Sig would issue something like that. In fact, I thought the dealer I got it from sold me a fake. I was very disappointed, to say the least. I ordered one from Vedder but I still kept looking up this holster business and came across your video. Then I went through the comments posted and dang! the belt goes over the holster for OWB?! I am pretty new to pistol carry/holsters and such but I have never imagined that for OWB carry the belt goes over the holster. Ah well, you learn something every day.
@jameslyons16619 күн бұрын
Appreciate the time making this video got this baby for my daughter on the ranch 👍
@blackswampoutdoors48508 күн бұрын
thanks for watching glad you found it useful!
@gabegarcia157211 күн бұрын
so so, is it the standard size Bando bag?
@blackswampoutdoors48508 күн бұрын
correct the original size
@hennysworld238211 күн бұрын
This is factory finish correct? And that thing is a beauty. Wonder why they made the pitchfork so big. And just didn’t do the whole trident on the gun smaller. Either way it’s beautiful
@blackswampoutdoors485011 күн бұрын
Technically Glock sent them to Talo for finishing work. But yeah, they are pretty cool!
@hennysworld238210 күн бұрын
@@blackswampoutdoors4850 Thanks! But Glock wouldn’t consider this “aftermarket” and make you pay the “$100 bucks ish” for any warranty work I’m guessing? lol
@blackswampoutdoors485010 күн бұрын
@@hennysworld2382 I would assume. I believe they partnered together for building these
@hennysworld23829 күн бұрын
@@blackswampoutdoors4850 thank you! 🙏🏼
@Aliasrip11 күн бұрын
Beautiful
@420drew511 күн бұрын
This one of my dream builds or a uppressed g44 this is dope asf
@Balloutdukk11 күн бұрын
This Glock would go for 1000 without a switch in Chicago just cause of the pitchforks😂😂😂😂
@LuiDineroo11 күн бұрын
🤣🤣🤣🤣🤣
@blackswampoutdoors485011 күн бұрын
That’s about what they go for if you can find them
@hallower551211 күн бұрын
quit commenting cheeseball
@Balloutdukk11 күн бұрын
@@hallower5512 they took down my first reply but u a 🤡 u not like that in no typa way and you one of the guys that get beat on stfu
@Ilikegunstoo11 күн бұрын
Dey done let da gds in da door
@douglasphillips2411 күн бұрын
Is that polished or clear coat?
@blackswampoutdoors485011 күн бұрын
I believe polished
@TonySama9111 күн бұрын
top is nice but after about 1000 rounds it will scratch
@FiftyDemons11 күн бұрын
Or any kydex holster that has no leather inside will competely destroy that top part
@blackswampoutdoors485011 күн бұрын
You would be surprised
@amcf112 күн бұрын
Try replacing the extractor. I did it on mine and has significantly improved the jamming issue.
@blackswampoutdoors48508 күн бұрын
i may give that a go, it is extremely weak
@tkgaming937312 күн бұрын
USP
@jdtexas204812 күн бұрын
The whistle has to be lipped just right- your top lip must cover part of the big hole - I blew it that way and it was very shrill and loud - it took me a while to figure out
@blackswampoutdoors48508 күн бұрын
we later found this aswell!
@shitcreek521220 күн бұрын
How about them belt loops
@bryangittings419721 күн бұрын
I would like to see how you polished it. Also, how you would clean and lube it and what you would use. I just bought 1 for fun
@blackswampoutdoors485016 күн бұрын
i may work on a future video for that! it definitely helped! simply field strip the handgun and use a dremel tool with a felt tipped polishing cone, apply a bit of compound or flitz and lightly polish the inner guide rails and feed ramp!
@jws392526 күн бұрын
Why not provide a link for C-Spec (or however you spell it)?
@blackswampoutdoors485014 күн бұрын
i suppose it was not impressive enough to bother
@jws392514 күн бұрын
@@blackswampoutdoors4850 I was the best of the bunch was it not? I am looking for a magazine and of all the ones you tested I thought it was the best. Any other suggestions?
@fernandomendoza466726 күн бұрын
I receive my today in the mail . I like the bag a lot more than the vertex socp. But I was let down completely because the belt is not that long . Doest not work as a sling bag . Wish belt be longer . Unfortunately can not use it . Wish they could create a solution because really love this bag .
@squidfighter7 күн бұрын
They do actually make an extension strap. I saw it on the sight when ordering mine.
@jimmissey943026 күн бұрын
My very first handgun learned how to shoot with that great gun
@robertkubrick373827 күн бұрын
Great video, thanks. Your video was refreshing compared to the "expert" videos, it felt friendly like a talk with my shooting buddy down the street, competent. I think the P22Q would be a good fit for me, size accuracy and controls. I don't need it for protective service although I did have a guy walk up on me unannounced once on property I rented outside city limits when I was plinking. I think I could manage with the P22Q in a pinch because I don't strap on two pistols to go plink.
@blackswampoutdoors485016 күн бұрын
thanks for the kind words! thank you for watching!
@cameronnorton589827 күн бұрын
Strange. I have 4 10 round factory mags and they are all rock solid so far. The only thing the rifle does not like is having a full magazine inserted with the bolt closed. I just load them all to 9 and I've never had enother issue.
@blackswampoutdoors485016 күн бұрын
it seems it is all very hit or miss!
@wolffo99927 күн бұрын
my savage mags work ok if you dont go too fast - go slow - and they seem to work - but not great
@mechcommander787628 күн бұрын
I have one in .22LR made, i think, in 1958
@paulb937628 күн бұрын
Got the same one, .30 cal
@blackswampoutdoors485028 күн бұрын
They are hard to beat
@proofpositive237929 күн бұрын
i run a g26 w/ rmr and extra mag. I'll give up extra gun for 1 extra mag in the main gun compartment.
@mcm6453Ай бұрын
What are the torque specs for the tube and torque for mounting to firearm? Anyone know? They manual doesn’t say.
@blackswampoutdoors485029 күн бұрын
it can vary by mfg and optic design, but on avg 18-25 InLb is sufficient
@irongoose3865Ай бұрын
Winchester ammo sucks! Every gun in every video I've seen has problems with Winchester.
@blackswampoutdoors4850Ай бұрын
I have definitely ran into plenty of issues with Winchester Rimfire anyhow
@irongoose3865Ай бұрын
@@blackswampoutdoors4850 If you can find a gun that runs with Winchester that gun will run anything and it's a keeper!
@jw546Ай бұрын
I went through Silencer Shop recently. Once my Form 4 was confirmed at my FFL, my Form 4 was approved, and I had my SilencerCo Harvester EVO in my hands in 48 hours! For real! I waited 290 went I got my Rugged Obsidian 9 1/12 years ago. I guess they really like getting all of those $200 TAX STAMPS!
@blackswampoutdoors4850Ай бұрын
thats insane!
@Friday1970Ай бұрын
Searching for this vid meant previous problems, and my mag is one. I have to be VERY careful in loading the magazine, if not the top round will stick straight up, like an awkward boner. Sometimes just after putting all 5 round in, the magazine has a happy moment and ejects three rounds out of the mag onto the floor. No input needed. I'd say almost 66% of the time, this mag will have some stupid issue. And after watching this video, I can feel some play, almost a slight click when pressing the sides in. The rifles's 10 years old, maybe 1000 rounds fired through it. It shoots great, but that magazine!
@blackswampoutdoors4850Ай бұрын
ive seen the same issues as you describe! haha
@garymcmullin2292Ай бұрын
the internet can make a guy dizzy. Other you tube channels have reported excellent results out of this gun and even the Winchester ammo. Then a guy starts reading comments and the water gets even more clouded about function and ammo appetite. I chalk up your experience to needing to be cleaned and just running in parts with much more firing cycles. Walther does have a recommended ammo list for this and the WMP pistol so that could be a dividend to help alleviate cycling problems. Shooters and the conditions in which they use their guns tend to be all over the board, lots and lots of variables. Smart bet is to go slow and observe the basics to excess, a clean weapon and recommended ammo will usually carry the day. Good video, thank you.
@kevinhochstetler9763Ай бұрын
Hey man where did you get the Charlie direct mount. I looked on silencer centrals website and all I can find is the bravo direct mount. I also have the omega 36m and I'm wanting to direct thread the silencer
@blackswampoutdoors4850Ай бұрын
one i purchased from silencerco through the shop that handled my suppressor paperwork. the other i purchased from PSA. appears they are still in stock on PSA
@Tinman-1Ай бұрын
Had that problem 2 lol 😂
@brandongonzalez6277Ай бұрын
Which model silencerco was this?
@blackswampoutdoors4850Ай бұрын
Silencerco Warlock22
@matthewrainey1894Ай бұрын
You are a joke!
@DuVentureАй бұрын
nice, i just got my sks. i will refinishing it with this method. thanks for sharing.
@blackswampoutdoors4850Ай бұрын
glad you found it helpful thanks!
@BidenFetterman20242 ай бұрын
Never regretted buying any gun till I bought this one.
@project.jericho22 күн бұрын
I want to say this is helpful but then I look at your username and I instantly question your judgement.
@countyline812 ай бұрын
I won’t sling my rifle with the mag in because it hurts.
@TheAverageJoeGunShow2 ай бұрын
👍🏻
@timetodopatriotstuff23152 ай бұрын
It wouldn't take that much for Savage to design a whole new mag system & they'd have a good little gun but it seems like they never will I've got a 5 round mag that works well but is still sloppy & the 10rd Savage mag I can only put 7rd in it or it will catch the top of the mag and won't feed I've tried bending everything to no avail, probably will never buy another Savage again.
@Phlfwlr2 ай бұрын
Bet my hellcat fits like a glove. Mine should come in in 2 days. Can’t wait to try it out
@ShowMeWhatINeedToKnow2 ай бұрын
GOOD LORD THE MF ADS ON KZread ARE DRIVING ME FING NUTS
@project.jericho22 күн бұрын
The channel also dictates how many play on their videos... I haven't seen an ad on KZread in years but complain to Black Swamp Outdoors if you feel they're excessive.
@JayBee-zd7mr2 ай бұрын
Turns out im just packin a K configuration. Wish i had the long configuration. Ive been tugging and pulling on the thing for years now. Just dont get no longer.
@Javaman55142 ай бұрын
Great detailed review.
@blackswampoutdoors4850Ай бұрын
thank you!
@DeweyMilton2 ай бұрын
Just bought this Walter P22 4 days ago straight out of the boxes guns jamming catching all my hammer would not reload going to have to file the hammer and track I don't know I'm not happy hopefully I can get it running right cuz I can't get a refund that's what I get for not doing research about this gun I found bad reviews one after another but at least I found videos that shows how to fix it I'll do more research next time I buy a firearm
@E0875422 ай бұрын
I see mini mags, I was wondering if there would be any trouble in the mag chambering a load
@stephencambron79433 ай бұрын
Excellent video Sir. Thank You.
@blackswampoutdoors4850Ай бұрын
thanks for watching!
@bluecreekroad3 ай бұрын
With them advertising that it "fits" handguns of that size with THAT tight of a fit, you would think they would have noticed that in the R&D and increased it's overall size by like 3/4" , which seems like that's all it would need to actually fit, and still allow for quick/smooth access without worrying about it snagging on the sight or slide....Then it would just be the Bando XL they already sell I guess 🤣
@coryhoggatt7691Ай бұрын
Only an issue because of the angle at which he put it in there. Slightly more horizontal and problem solved.
@bluecreekroadАй бұрын
@@coryhoggatt7691 Even then, it's obvious that it's still way too tight of a fit.
@voodoowraith3 ай бұрын
I've owned a lot of semi auto 22lr pistols over the years. Haven't found one yet that wasn't fussy about what ammo it liked. They'll run great with one brand and hate another. I picked the little Walther up a while ago and it's no different. She likes CCI, hates Winchester. Haven't tried Aguila yet, but I will eventually. Bulk ammo's usually hit or miss due to quality control, but mine runs decent with Federal BYOB that I got on sale. That's the fun part of 22lrs. Shooting a bunch for low cost and seeing what they like.
@user-td1fi6vu2t3 ай бұрын
My Mark II will dot your eye. Savage is making great progress with the magazine issues. Quality control is much better. The stainless mags are much better also. It is great little rifle. ❤
@blackswampoutdoors48503 ай бұрын
i have never tried one of the stainless mags, i may have to find one now!
Пікірлер
Is your bad a standard size or LX?
Original standard size
150gr. Sub-Sonic “CLEAN”?
Summit City Bullets Hi-Tek coated 147gr, my subsonic hand loads
Fantastic video
Thank you for watching!
Thanks for the video first of all. Regarding the holster clips, I thought the same thing as you. Couldn't believe that Sig would issue something like that. In fact, I thought the dealer I got it from sold me a fake. I was very disappointed, to say the least. I ordered one from Vedder but I still kept looking up this holster business and came across your video. Then I went through the comments posted and dang! the belt goes over the holster for OWB?! I am pretty new to pistol carry/holsters and such but I have never imagined that for OWB carry the belt goes over the holster. Ah well, you learn something every day.
Appreciate the time making this video got this baby for my daughter on the ranch 👍
thanks for watching glad you found it useful!
so so, is it the standard size Bando bag?
correct the original size
This is factory finish correct? And that thing is a beauty. Wonder why they made the pitchfork so big. And just didn’t do the whole trident on the gun smaller. Either way it’s beautiful
Technically Glock sent them to Talo for finishing work. But yeah, they are pretty cool!
@@blackswampoutdoors4850 Thanks! But Glock wouldn’t consider this “aftermarket” and make you pay the “$100 bucks ish” for any warranty work I’m guessing? lol
@@hennysworld2382 I would assume. I believe they partnered together for building these
@@blackswampoutdoors4850 thank you! 🙏🏼
Beautiful
This one of my dream builds or a uppressed g44 this is dope asf
This Glock would go for 1000 without a switch in Chicago just cause of the pitchforks😂😂😂😂
🤣🤣🤣🤣🤣
That’s about what they go for if you can find them
quit commenting cheeseball
@@hallower5512 they took down my first reply but u a 🤡 u not like that in no typa way and you one of the guys that get beat on stfu
Dey done let da gds in da door
Is that polished or clear coat?
I believe polished
top is nice but after about 1000 rounds it will scratch
Or any kydex holster that has no leather inside will competely destroy that top part
You would be surprised
Try replacing the extractor. I did it on mine and has significantly improved the jamming issue.
i may give that a go, it is extremely weak
USP
The whistle has to be lipped just right- your top lip must cover part of the big hole - I blew it that way and it was very shrill and loud - it took me a while to figure out
we later found this aswell!
How about them belt loops
I would like to see how you polished it. Also, how you would clean and lube it and what you would use. I just bought 1 for fun
i may work on a future video for that! it definitely helped! simply field strip the handgun and use a dremel tool with a felt tipped polishing cone, apply a bit of compound or flitz and lightly polish the inner guide rails and feed ramp!
Why not provide a link for C-Spec (or however you spell it)?
i suppose it was not impressive enough to bother
@@blackswampoutdoors4850 I was the best of the bunch was it not? I am looking for a magazine and of all the ones you tested I thought it was the best. Any other suggestions?
I receive my today in the mail . I like the bag a lot more than the vertex socp. But I was let down completely because the belt is not that long . Doest not work as a sling bag . Wish belt be longer . Unfortunately can not use it . Wish they could create a solution because really love this bag .
They do actually make an extension strap. I saw it on the sight when ordering mine.
My very first handgun learned how to shoot with that great gun
Great video, thanks. Your video was refreshing compared to the "expert" videos, it felt friendly like a talk with my shooting buddy down the street, competent. I think the P22Q would be a good fit for me, size accuracy and controls. I don't need it for protective service although I did have a guy walk up on me unannounced once on property I rented outside city limits when I was plinking. I think I could manage with the P22Q in a pinch because I don't strap on two pistols to go plink.
thanks for the kind words! thank you for watching!
Strange. I have 4 10 round factory mags and they are all rock solid so far. The only thing the rifle does not like is having a full magazine inserted with the bolt closed. I just load them all to 9 and I've never had enother issue.
it seems it is all very hit or miss!
my savage mags work ok if you dont go too fast - go slow - and they seem to work - but not great
I have one in .22LR made, i think, in 1958
Got the same one, .30 cal
They are hard to beat
i run a g26 w/ rmr and extra mag. I'll give up extra gun for 1 extra mag in the main gun compartment.
What are the torque specs for the tube and torque for mounting to firearm? Anyone know? They manual doesn’t say.
it can vary by mfg and optic design, but on avg 18-25 InLb is sufficient
Winchester ammo sucks! Every gun in every video I've seen has problems with Winchester.
I have definitely ran into plenty of issues with Winchester Rimfire anyhow
@@blackswampoutdoors4850 If you can find a gun that runs with Winchester that gun will run anything and it's a keeper!
I went through Silencer Shop recently. Once my Form 4 was confirmed at my FFL, my Form 4 was approved, and I had my SilencerCo Harvester EVO in my hands in 48 hours! For real! I waited 290 went I got my Rugged Obsidian 9 1/12 years ago. I guess they really like getting all of those $200 TAX STAMPS!
thats insane!
Searching for this vid meant previous problems, and my mag is one. I have to be VERY careful in loading the magazine, if not the top round will stick straight up, like an awkward boner. Sometimes just after putting all 5 round in, the magazine has a happy moment and ejects three rounds out of the mag onto the floor. No input needed. I'd say almost 66% of the time, this mag will have some stupid issue. And after watching this video, I can feel some play, almost a slight click when pressing the sides in. The rifles's 10 years old, maybe 1000 rounds fired through it. It shoots great, but that magazine!
ive seen the same issues as you describe! haha
the internet can make a guy dizzy. Other you tube channels have reported excellent results out of this gun and even the Winchester ammo. Then a guy starts reading comments and the water gets even more clouded about function and ammo appetite. I chalk up your experience to needing to be cleaned and just running in parts with much more firing cycles. Walther does have a recommended ammo list for this and the WMP pistol so that could be a dividend to help alleviate cycling problems. Shooters and the conditions in which they use their guns tend to be all over the board, lots and lots of variables. Smart bet is to go slow and observe the basics to excess, a clean weapon and recommended ammo will usually carry the day. Good video, thank you.
Hey man where did you get the Charlie direct mount. I looked on silencer centrals website and all I can find is the bravo direct mount. I also have the omega 36m and I'm wanting to direct thread the silencer
one i purchased from silencerco through the shop that handled my suppressor paperwork. the other i purchased from PSA. appears they are still in stock on PSA
Had that problem 2 lol 😂
Which model silencerco was this?
Silencerco Warlock22
You are a joke!
nice, i just got my sks. i will refinishing it with this method. thanks for sharing.
glad you found it helpful thanks!
Never regretted buying any gun till I bought this one.
I want to say this is helpful but then I look at your username and I instantly question your judgement.
I won’t sling my rifle with the mag in because it hurts.
👍🏻
It wouldn't take that much for Savage to design a whole new mag system & they'd have a good little gun but it seems like they never will I've got a 5 round mag that works well but is still sloppy & the 10rd Savage mag I can only put 7rd in it or it will catch the top of the mag and won't feed I've tried bending everything to no avail, probably will never buy another Savage again.
Bet my hellcat fits like a glove. Mine should come in in 2 days. Can’t wait to try it out
GOOD LORD THE MF ADS ON KZread ARE DRIVING ME FING NUTS
The channel also dictates how many play on their videos... I haven't seen an ad on KZread in years but complain to Black Swamp Outdoors if you feel they're excessive.
Turns out im just packin a K configuration. Wish i had the long configuration. Ive been tugging and pulling on the thing for years now. Just dont get no longer.
Great detailed review.
thank you!
Just bought this Walter P22 4 days ago straight out of the boxes guns jamming catching all my hammer would not reload going to have to file the hammer and track I don't know I'm not happy hopefully I can get it running right cuz I can't get a refund that's what I get for not doing research about this gun I found bad reviews one after another but at least I found videos that shows how to fix it I'll do more research next time I buy a firearm
I see mini mags, I was wondering if there would be any trouble in the mag chambering a load
Excellent video Sir. Thank You.
thanks for watching!
With them advertising that it "fits" handguns of that size with THAT tight of a fit, you would think they would have noticed that in the R&D and increased it's overall size by like 3/4" , which seems like that's all it would need to actually fit, and still allow for quick/smooth access without worrying about it snagging on the sight or slide....Then it would just be the Bando XL they already sell I guess 🤣
Only an issue because of the angle at which he put it in there. Slightly more horizontal and problem solved.
@@coryhoggatt7691 Even then, it's obvious that it's still way too tight of a fit.
I've owned a lot of semi auto 22lr pistols over the years. Haven't found one yet that wasn't fussy about what ammo it liked. They'll run great with one brand and hate another. I picked the little Walther up a while ago and it's no different. She likes CCI, hates Winchester. Haven't tried Aguila yet, but I will eventually. Bulk ammo's usually hit or miss due to quality control, but mine runs decent with Federal BYOB that I got on sale. That's the fun part of 22lrs. Shooting a bunch for low cost and seeing what they like.
My Mark II will dot your eye. Savage is making great progress with the magazine issues. Quality control is much better. The stainless mags are much better also. It is great little rifle. ❤
i have never tried one of the stainless mags, i may have to find one now!