Пікірлер

• 
  @wevertonsouzamatos93432 күн бұрын

  Thanks

• 
  @haseebsafdar671216 күн бұрын

  i make sketch as you did but when my forehead plate patched out at that instant my sides and front lines disappeared what should i do or how i can tell you my problem by picture or by video ?? i have alot of interest in 3D modeling

• 
  @B3D12 күн бұрын

  you could just drop the file . also you can try difference methord to make it work. form is one of the way

• 
  @abeehasafdar562516 күн бұрын

  Is it important to join the points with only "fit point spline"

• 
  @haseebsafdar671217 күн бұрын

  I locate all the points correctly forehead is patched easily but sides can't so how i patch them i want to select a single line but whole forehead line is selected when i try to patch side due to this reason sides didn't patch correctly

• 
  @sjacobs749217 күн бұрын

  Does not work for me in my case. I can only use screen keyboard

• 
  @B3D17 күн бұрын

  oh why

• 
  @Mr.DMZ.21 күн бұрын

  I'll try this Edit: it totally worked!!

• 
  @imqqmi21 күн бұрын

  Still works BUT the accuracy can sometimes be less than 0.02mm so keep that in mind! That's likely accurate enough in most cases though but there are rounding errors.

• 
  @B3D9 күн бұрын

  i think if you are asking for 0.02mm accuracy, please pay the industry level app and printer. this video more for hobbies...

• 
  @erum115923 күн бұрын

  Thank you so much! It worked !!

• 
  @haseebsafdar671229 күн бұрын

  @4:25 it is necessary to tick mark 3d sktech in sketch palate

• 
  @B3D27 күн бұрын

  yes

• 
  @NikoMoraKamuАй бұрын

  thanks mate , still works

• 
  @SraKim-ng4hfАй бұрын

  What is the difference between the one with the touchpad and the one without it?

• 
  @B3DАй бұрын

  some time you readdy dont want the touchpad effect the control it is tablet.

• 
  @BrainBoost145Ай бұрын

  Asus rog strix g15 or 16

• 
  @ccccchhhhaaaaaddddyfurious7072Ай бұрын

  What filament did you use PLA im guessing?

• 
  @B3DАй бұрын

  nop. its resin

• 
  @paleman6237Ай бұрын

  Just ran into this after starting to dabble with fusion360, and my god this seems to be a lifesaver!

• 
  @Is-AMNE3Ай бұрын

  Nice

• 
  @nickthesail0rАй бұрын

  what you do if the nib is cut and stay inside ??????????

• 
  @B3DАй бұрын

  use rubber tap stick it out

• 
  @asherhenderson3541Ай бұрын

  THANKS I needed this!

• 
  @perrylim9728Ай бұрын

  I have struggled in the past yr Can you help

• 
  @johnbeck95732 ай бұрын

  Doesn't it come with a plastic cover

• 
  @B3D2 ай бұрын

  mind one dont have. yours ?

• 
  @ainurusmanov79205 күн бұрын

  ​@B3D😂

• 
  @johnbeck95733 күн бұрын

  Yes mine did although mine is the acronym z13 great machine they are ​@B3D

• 
  @jakegoh12 ай бұрын

  Good tips.

• 
  @niconinguno2 ай бұрын

  Hi!

• 
  @B3D2 ай бұрын

  hi

• 
  @helloworld75272 ай бұрын

  Hi we same the same naga, however can tell me if your naga scroll wheel can do scroll click that is pressing your scroll wheel down Because the synapse software says its an available function. However the tilt left and right are functional as expected.

• 
  @B3D2 ай бұрын

  can . i am selling the mouse. too many mouse like to clear it out

• 
  @teddycarr1792 ай бұрын

  It worked. Thanks, G!

• 
  @martinjakobson88352 ай бұрын

  06.05.2024. This method is dead :(

• 
  @B3D2 ай бұрын

  isit ?

• 
  @martinjakobson88352 ай бұрын

  @@B3D On my Mac, after selecting the PDF option instead of the printer, it’s not retaining this selection, and the export button remains greyed out.

• 
  @Star_Asahi2 ай бұрын

  ThAnk you so much!!!

• 
  @luckychris77772 ай бұрын

  Bro... why is the PC so problematic with just a simple file name written in chinese??? Because of that i can't zip the file nor use the file on other aplications. Unless i rename it... (edit) i found the issue go to control panel change date, time, or number formats go to administrative click the change system locale and check the Beta: use unicode UTF-8 For worldwide language support and now you can zip any language move files to aplication where ever you want...

• 
  @B3D2 ай бұрын

  You actually will face same issue when Japanese and Korean . If you ask me why … i think is some development history stuff which not what I should know . Well as long as it work . I do python a mini program that can rename by patch . Just if it will lose the file name

• 
  @picklejammer693 ай бұрын

  peak male perfection

• 
  @itstime61203 ай бұрын

  It’s called bullshit

• 
  @B3D3 ай бұрын

  lol why

• 
  @pratikgawde123 ай бұрын

  Does key binds work even if Razer synapse is not running on pc? If I program keybinds(like alt+tab) once with Razer synapse and save it. Will the keybinds work without synapse running and over Bluetooth?

• 
  @B3D3 ай бұрын

  it save on mouse. but you dont know which profile you using. I stop using it already . eventually I still prefer g604 there is gkey on mouse (like fn key) 6 button become 10 shortcut. plus can gkey + roller direct swap volumn. mean it actually double -1 all they key . but razer do not have that kind of option. which abit annoying to me == and dame hard to sell it . so not recommend

• 
  @luniccorneliu54113 ай бұрын

  You're the best, my friend! Dirt was eliminated by spraying alcohol around volume button. Now it work fine, as before. Thanks a lot! 😊

• 
  @B3D3 ай бұрын

  happy to help.

• 
  @user-zs2kj4vp4b3 ай бұрын

  Hello, How was the Razer naga for cad ?

• 
  @B3D3 ай бұрын

  I still prefer G604 . the size make my hand pain even after few days. personal refference depend how big your hand i guess.

• 
  @nikocabug3483 ай бұрын

  Just simple guys.....use 4g to update

• 
  @B3D3 ай бұрын

  the simple thing is my house do not have 4g signal. thats why got this video and also thing I got I mention in the video if no mistake. is a joke when Malaysia start sharing about 5g but my house in city center do not have 4g signal

• 
  @shellumus3 ай бұрын

  Thank you so much,, this helped a lot!!!!!!

• 
  @Femto-p4f3 ай бұрын

  That might be v1 and v2

• 
  @nein_33713 ай бұрын

  Lol wtf thank you so much

• 
  @iconetsenterprise53623 ай бұрын

  just seen this after years thanks works like magic

• 
  @heloops3 ай бұрын

  what were you adjust for the filament sensor?

• 
  @B3D3 ай бұрын

  make sure the sensor distant correct. you use mk3 now ?

• 
  @heloops3 ай бұрын

  @@B3D Yes I have an mk2.5 and mk3 now. Was just curious on what you were adjusting on the top.

• 
  @Rublyobscure3 ай бұрын

  you just saved my A level coursework thank you kindly

• 
  @Kaiei3D4 ай бұрын

  more accurate this should call texture print XD

• 
  @B3D3 ай бұрын

  yeah , but it is what it is . mass market dont know .

• 
  @B3D4 ай бұрын

  I just realize this video 5 month ago. the fix button still working fine. so no worry . try it. dont go paid for the nonsense screen or repair fees .

• 
  @erikandresen834 ай бұрын

  I have to admit that I really didn't expect this to work for me. My volume buttons were completely pushed in and didn't move at all. I put some 70% isopropyl alcohol on a q-tip and worked it around the buttons. After about 3 seconds, my buttons were working perfectly. I thought that the buttons were physically damaged and needed to be replaced. Thanks a lot!

• 
  @B3D4 ай бұрын

  great to hear that . but end up there is good news and bad news. if dirt can go in to he button mean it is not actually dust or water proof.

• 
  @ashalex47594 ай бұрын

  For me, calls volume is too down

• 
  @0700083edu4 ай бұрын

  worked thanks

• 
  @OspreyKnight4 ай бұрын

  My button has been sticking in a weird way. Ill try this.

• 
  @lhanzepuga76574 ай бұрын

  Is this good for motorcycle engine?

• 
  @akshaybaby66464 ай бұрын

  Thank you brother that really worked you saved me thanks❤❤

• 
  @josenava63394 ай бұрын

  This fixed my Galaxy s22plus thank you

• 
  @Red916GIANT5 ай бұрын

  I cannot thank you enough, worked perfectly for my buttons that were HARD to press. Thank you so much. I used a tiny amount on the end of a Q-tip.

• 
  @B3D4 ай бұрын

  welcome

• 
  @TMProjection5 ай бұрын

  using chitubox pro, 1.4.1 selecting a support takes like 5 seconds lmao using 3090 ti, intel 11900k, 128gb ram this is one of the worst performing programs ive used its great, but performance is disgusting

• 
  @B3D5 ай бұрын

  did you try the fix i provide ? I use pro too . is fine here

• 
  @MrUnmystakable5 ай бұрын

  This was excellent. You should continue with more videos aling this line because no one really touches on this. Do you have any work flows that involve this and form modeling together?