I have the dn-2000f since 1990' when it came out. Bought it new then. Do you have the part number for that belt? Just open it and notice the belt is totally gone. I am holding on opening the other one until I get the belts for both doors.
@leokearns12212 ай бұрын
Well after 7 months and your help and some hard to source parts, I am now the proud owner AGAIN (long story) of my fully refurbished Denon Dn-2000F MKIII from 1998.
@FoxDaCosta3 ай бұрын
I have the same problem. What is the size of the rubber belts?
@Skys20054 ай бұрын
Hi! If I use 10uF capitators is this gonna work?
@wellhiddenmatt4 ай бұрын
Hi there, 10uf would probably still work, but the 220uf is the specification needed as stated in the technical sheet for the Sony video chip. It’s likely you won’t get a strong enough signal through the cable, and you’ll find that it won’t function on every tv that you plug it into.
@Skys20054 ай бұрын
@@wellhiddenmatt after some thinking i decided to make RGB RCA not Scart. I don't want make holes in console, so i gonna attach outside 4 RCA for audio and RGB video
@abyssalsoul62164 ай бұрын
Hello Viewers. I would like to know the belt specification. Seems to be a square belt. Dimensions please if anyone knows. Lenght and thickness Thanks
@natiunea5 ай бұрын
This MATT is hidden FOR A REASON! My friend just followed his replacement and improvised with a 220 instead of 2 capacitors of 105 each. I wish I could send Matt my prayers - because I cannot, I continue to pray for his good sake. The reason that is still not recognised by my mac Airport Utility is with the Mac version (iphone version). After I use a Windows utility or get Mac/iPhone to see it, I will every day pray for your health, dear Matt! Because my Airport Express now lights as a new one.
@natiunea5 ай бұрын
This MATT is hidden FOR A REASON! My friend just followed his replacement and improvised with a 220 instead of 2 capacitors of 105 each. I wish I could send Matt my prayers - because I cannot, I continue to pray for his good sake. The reason that is still not recognised by my mac Airport Utility is with the Mac version (iphone version). After I use a Windows utility or get Mac/iPhone to see it, I will every day pray for your health, dear Matt!
@Retirednolongeractive6 ай бұрын
Probably you need to recap some capacitors but at the same time using an oscilloscope to test the lens.
@ShallowRavers26 ай бұрын
would love to see a full video of changing the belt for the cd drawer. have started disassembling my dn1800f, but quickly gets complicated without good instructions.
@drewjcomo3 ай бұрын
I have a 2000MK3 and a 2100F that both need belt kits. I haven't been able to find a good place in the US to get the belts, nor find instructional videos.
@ShallowRavers23 ай бұрын
@@drewjcomo purchased belt on ebay i think
@Factory_Dance_908 ай бұрын
Hi friend, I just came across your VDO. I have a question. I have a Denon 2000f mk2 and a Denon 2500F but the 2500F My CD tray wouldn't play, so I took the CD tray from my 2000f mk2. Put it in the 2500F machine instead. It appears that the power goes into the CD and reads the disc, but no sound comes out. I would like to know what is causing the sound to not be output. Or is it because of the Main PCB? It's a different model, but I saw the Main PCB for the 2000F model on Ebay. I can buy it to fit it. 2000F mk2? Now I want to revive an old CD player that I used to play with a long time ago. Please help with any suggestions. Thank you in advance.
@leokearns122110 ай бұрын
Hey Matt. I have the MKIII and the cd drawers open and close but the disc does not spin . It does seem to lock in place but nothing. Is that the belt do you think?
@wellhiddenmatt10 ай бұрын
Does the switch register the closed door? Otherwise it will still think it’s empty amad not spin up.
@leokearns12219 ай бұрын
@@wellhiddenmatt Good point. I shall test your theory. Thanks.
@softworldsolution Жыл бұрын
Not showing body opening
@jorgesilva453 Жыл бұрын
consulta se me a despegado la goma del cue de una denon 4500 sabrias como hacer para pegar dicha goma desde ya gracias
@The-Weekend-Warrior2 жыл бұрын
I'm having the exact same issue in 2022 and your video just pointed me in the right direction. Mine does multiple flashes, wants to start up but apparently can't. The two caps have minor bulging so I'm going to start by exchanging those and we'll see. Thanks for making this video!
@robwulz34932 жыл бұрын
I just bought one for a quid , car boot . Not working . Will try to fix as you have , bit of fun . Now where are my free spare caps , i put them safe somewhere .
@wellhiddenmatt2 жыл бұрын
Nice one. If that doesn’t work there are tutorials to replace the power section. The wifi extender and airplay function is still useful even now.
@robwulz34932 жыл бұрын
@@wellhiddenmatt I already have 3 airport extremes from CEX between £8 and £12 each . They are still perfect extenders for my house , WiFi everywhere . This , if it gets mended , is for a printer . May as well get another for the stereo from CEX for £5 too . Thanks , in advance , for the help .
@claystunes60962 жыл бұрын
The spindle motor not turning cause its not getting 5volts from the power board.
@pablogarcia78352 жыл бұрын
Finally, any solution? I have the same problem
@Adam_Bertil2 жыл бұрын
Wow! I really like how you solve problem after problem so easily. One of my CD drives goes straight back in when it reaches the end position. Do you have any tips on how to fix this?
@wellhiddenmatt2 жыл бұрын
I’m not sure about that, but I’ll finally be doing a part 2 video this weekend. I’m only a few years late. I’ll see if I can replicate your problem. Off the top of my head it could be the same problem. If the belt is loose it might not have enough power in it to push the tray all the way out so it automatically closes again.
@Adam_Bertil Жыл бұрын
Hello again! Now I have bought another Denon 2000F. One sled moves slowly and gets stuck before it reaches the end position. Any tips?
@frankieb22652 жыл бұрын
Hi I have a DN-2100F only my left not working very slow to get in the light stay green but reading any suggestions.Thx
@JohnyTheWizKid2 жыл бұрын
You don't really need a region switch to play a japanese cd game cuz' all I needed was that card and I was able to play Rondo of Blood. I just wanna' know if the rgb mod that's put on your turbografx will still play cd games without composite in the back.
@zeroxdogma2 жыл бұрын
I’m looking for the answer too. Need to know if the cds games run with the RGB signal too.
@JohnyTheWizKid2 жыл бұрын
@@zeroxdogma I'm told it can but the audio exits one way so to get cd audio from the cd unit, you need an audio out on the TG, then hook it to the CD unit. Its confusing. Right now, its being modded so I'll understand it when its done. Then when he shows the pictures, I'll put in a video request for Long Island Retro Gaming to show how to get RGB on this console + cd addon.
@audioleo19902 жыл бұрын
Is there a part 2?
@davidhaney13942 жыл бұрын
Thanks for the vid , i just picked up a DENON DN-1800F with the same issue . thanks for the heads up on the belt !
@fogzax2 жыл бұрын
Did you ever get this sorted? I have the same problem on my CLD 2950 from time to time but I just have to keep inserting discs until it plays and then it just goes away again
@mikepxg64062 жыл бұрын
I know this is an old video but still useful. my device runs hot suspect caps may need replacing.
@GoodwinsPlace3 жыл бұрын
That's an interesting way of doing it. I've just done the RGB mod but via a MS1 connector.
@griggsnichols99883 жыл бұрын
What kind of grease do you use on these?
@wellhiddenmatt3 жыл бұрын
The best is Molykote, or a white lithium grease. Do NOT use something like WD40 as that will start to destroy the plastic.
@griggsnichols99883 жыл бұрын
@@wellhiddenmatt Thanks! (I figured that about WD40) That's why I thought I'd ask what you liked. I figured others might like to know too. Which model of MolyKote do you find works best for the CD players? Spray or tube grease?
@wellhiddenmatt3 жыл бұрын
@@griggsnichols9988 tube grease it’s much easier to apply. You can scoop it from the tube with a cocktail stick or small screwdriver and apply it just to the parts you need it.
@griggsnichols99882 жыл бұрын
@@wellhiddenmatt Molykote 44?
@khansillusion3 жыл бұрын
Where did u bought the replacement capacitors from and what is the exact volts or other numbers on the capacitor thanks
@wellhiddenmatt3 жыл бұрын
Hi there, you can buy capacitors from any electrical wholesale shop. In the UK CPC Farnell or RS components are the usual. Or from eBay. Good quality capacitor makes are rubycon, nichicon or Panasonic. For the voltage and capacitance it’s written on the side you can always go with a higher voltage NEVER lower. And it’s also important that the capacitance is also the same.
@mikhail_roberts3 жыл бұрын
Does having the old HD adapter put a bottle neck on the HD speed?
@frankk.31873 жыл бұрын
Thanks. Replacing the capacitors on the Power supply Board repaired my Airport express. I used a cutter knife and a bit of time to open the housing, which made gluing the housing back together easier.
@wellhiddenmatt3 жыл бұрын
Glad you got it fixed.
@mikhail_roberts3 жыл бұрын
Yeah these old AE with the HP jack were super handy. Way ahead of their time. I remeber my roomie and I in college being able to easily change change the music in our Pad, and we had decent I turned throughout the house before most of my pleb classmates.
@khansillusion3 жыл бұрын
Where did u bought the replacement items any name etc or item names will be helpful thanks
@mazatch3 жыл бұрын
cl-iMac-tic!
@DisplayingModelBehaviour3 жыл бұрын
iMac-ulate video!
@wellhiddenmatt3 жыл бұрын
Thank you!! Here's to more vids!!!
@marcelvanengen56333 жыл бұрын
Excellent. After 13 years mine broke in the described way. Opening up the device is the hardest part. 2 new capacitors and all up and running again. Thanks for great explanation and video. Up cycling is so satisfying.
@wellhiddenmatt3 жыл бұрын
Glad to help. I actually have plans for another one of these that I took apart years ago. Video of that coming soon.
@marcelvanengen56333 жыл бұрын
Opening the ultrasonically welded housing parts is the difficult part. I used milly putty to bring it back to a nice one piece part.
@duncan-rmi3 жыл бұрын
thank you- thought I had a bad laser. here's a good tip, folks- get your working area as quiet as possible, so you can hear (what I couldn't hear) the motor on one side labouring to close the door, which looked shut to me. the switch was fine, but the drawer latch wasn't coming over far enough. when the other side started doing it too, I woke up.... changed both of the tiny belts (inside the front of the drawer) & away it went.
@FoxDaCosta3 ай бұрын
I have the same problem. What is the size of the rubber belts?
@benbiche3 жыл бұрын
Hello, hope you managed to fix this beauty!
@DjStalin1003 жыл бұрын
Does anyone know the difference between the 2000nf, MK2, and MK3? Which one is better?
@wellhiddenmatt3 жыл бұрын
The mk2 control unit is different. It uses a lcd screen instead of vfd. Also the MK2 doesn’t have jog wheels. Just buttons. So technically the mk3 is better. But only slightly.
@jameskrivitsky97153 жыл бұрын
Did you ever submit PART 2 ? I would like to see if any of the units had sound output issues. Thanks JwgK
@wellhiddenmatt3 жыл бұрын
Hi there. I should do a part 2. I have had no sound problems with my units. It was only belt problems. With the tray mechanisms.
@jameskrivitsky97153 жыл бұрын
@@wellhiddenmatt Thanks, yes belts do age and become sticky or lose their elasticity. My issue is electronic on the drive #2 RCA output ( right channel only ). I can hear the music but with crackly static. I did some re-soldering which worked short term. It returned once I screwed the cover back on and attached the cord to my mixer. Next is breaking out the VOM and start schematic path. I will inform if I find the culprit component. JwgK
@HellFireno883 жыл бұрын
I have the same problem. You say that the problem was a loose pulley, but you are pointing to a belt. Are there supposed to be two belts in there? Or did you just change the old belt to a new and tighter one?
@wellhiddenmatt3 жыл бұрын
Hi, sorry. Yes I said pulley I meant belt. I just put new belts in. Nothing too tight though. Just a little smaller than the old stretched one.
@HellFireno883 жыл бұрын
@@wellhiddenmatt Thank you for answering! I'll try new belts asap :-) They worked fine the last time I used them (10 years ago). New belt and some grease on the sliding parts coming up :-)
@davidbackler77753 жыл бұрын
@@wellhiddenmatt I think mine have perished. What is the diameter of the belt? I would like to have new ones ready before I open the unit.
@HellFireno883 жыл бұрын
I couldn't fins new ones. I bought regular rubber bands but they where to big. So I found some small rubber hairbands for little girls, and two of those together worked well.
@ahahaa16023 жыл бұрын
Mixed Square Cassette Tape Belt Machine Recorder Rubber Belt 25/30/35/38/40/45/50/55/60/65MM Assorted Common Belt Repair Rebuild for Repair Maintenance - Black (Packs of 30)
@oilsmokejones34524 жыл бұрын
Thanks for a pro video. A lot of those still in service. I've lost count of how many came here with bad discs so I always ask first if another disc was tried..any that make their way here I always clean and lube that toggle switch tho. The other thing is that white ribbon cable. In a couple cases I had to clean the contacts with a Q tip, contact spray, and a little WD40.. I got few with damaged contacts that looked like they were forced out of the connector without unlocking it..was able to trim the cable back and make new contacts and they have not come back..
@musicbb47994 жыл бұрын
my tv no power
@patr95914 жыл бұрын
I have a Proscan, same EXACT problem! Still works every...10th try? ;( Cleaned laser with rub. alc. no go. Ugh!
@emmettturner94525 жыл бұрын
The original system internally mixes sound from the CD player for RF output. Why doesn’t yours for AV output?
@actodisko5 жыл бұрын
Very helpfull! Mechanics work on mine. CD plays and tracks, but no sound on either player! Where would you start?
@michaelmitchell82185 жыл бұрын
Laser pickup. Don’t take the laser pick up out. Because your never get it in line again. Give the lens a clean if that don’t work then you need a new pickup. You just can’t put a new pickup in and think it will work. You need oscilloscope plus a test disc and service manual. Laserdisc is not like a CD player and is hard to put everything inline.
@Retirednolongeractive2 жыл бұрын
Why new laser doesn't work with this even if it's the same model?
@michaelmitchell82182 жыл бұрын
@@Retirednolongeractive because as I said it might be new but it need Calibrating and you need special tools and oscilloscope. Laserdisc is not like a CD player at all.
@Retirednolongeractive6 ай бұрын
@@michaelmitchell8218as far as I’m concerned “new” laser that we bought online were actually recycled units correct me if I’m wrong. I was given a Pioneer CLD-3380 LD player by a friend of mine which doesn’t work anymore as it would not read LD or CD so I decided to bring it to my local technician for inspection but before that the lens had red light on it. So what do you think it’s the problem?
@@michaelmitchell8218 ok thanks. Btw are u in the laserdisc forever facebook group?
@vivianboulanger61705 жыл бұрын
Hi, very nice video, thanks! could you make a video to explain (or just explain with text) how to adjust the tray, I can not settle mine and I can't find the service manual (Denon DN-2000F MK3). Thank you in advance :-)
@melissaratisher89565 жыл бұрын
This is a very helpful video, thanks! I'm trying to fix my DN-2000F MK3 CDJs, but can't find the service manual for it. I wish I knew how you got the door off of the CD tray, or else if you know where I can find the service manual.
@wellhiddenmatt5 жыл бұрын
Hi there, The door unclips from underneath. There are two little clips about one quarter in on each side on the bottom. Just slide the front upwards from either side and it should pop off. Hope this helps
@igorcast5005 жыл бұрын
Hi, my friend, I'm having the same problem with the suitcase engine. Did you solve the problem of your everdrives?
@wellhiddenmatt5 жыл бұрын
The way to solve it is to send the TBED to Krikkz. He will reflash the fpga with different memory timings for PC Engine. I'm currently waiting for a second one to come direct from him. I want the second one so that I have one for my PC Engine and one for my Turbografx-16
@igorcast5005 жыл бұрын
@@wellhiddenmatt ok tank you
@wellhiddenmatt5 жыл бұрын
@@igorcast500 Hi there, Just a follow up to confirm that my second one that was sent from Krikkz works perfectly with all my PC Engines.
@becomematrix5 жыл бұрын
I thank you sir.
@Fetishom5 жыл бұрын
Opening a case like this should not destroy it when you know how. This is the type you have to crack open cause there is a bit of glue in the groove. You only have to take a large but slim flat screwdriver and knock on the groove with a hammer such a way to crack open the groove-glued. Then, ply appart. I did so many times (small black psu, modem, remote, etc.) Be patient, secure the device not to move, watch your fingers. It saves the box.
Пікірлер
I have the dn-2000f since 1990' when it came out. Bought it new then. Do you have the part number for that belt? Just open it and notice the belt is totally gone. I am holding on opening the other one until I get the belts for both doors.
Well after 7 months and your help and some hard to source parts, I am now the proud owner AGAIN (long story) of my fully refurbished Denon Dn-2000F MKIII from 1998.
I have the same problem. What is the size of the rubber belts?
Hi! If I use 10uF capitators is this gonna work?
Hi there, 10uf would probably still work, but the 220uf is the specification needed as stated in the technical sheet for the Sony video chip. It’s likely you won’t get a strong enough signal through the cable, and you’ll find that it won’t function on every tv that you plug it into.
@@wellhiddenmatt after some thinking i decided to make RGB RCA not Scart. I don't want make holes in console, so i gonna attach outside 4 RCA for audio and RGB video
Hello Viewers. I would like to know the belt specification. Seems to be a square belt. Dimensions please if anyone knows. Lenght and thickness Thanks
This MATT is hidden FOR A REASON! My friend just followed his replacement and improvised with a 220 instead of 2 capacitors of 105 each. I wish I could send Matt my prayers - because I cannot, I continue to pray for his good sake. The reason that is still not recognised by my mac Airport Utility is with the Mac version (iphone version). After I use a Windows utility or get Mac/iPhone to see it, I will every day pray for your health, dear Matt! Because my Airport Express now lights as a new one.
This MATT is hidden FOR A REASON! My friend just followed his replacement and improvised with a 220 instead of 2 capacitors of 105 each. I wish I could send Matt my prayers - because I cannot, I continue to pray for his good sake. The reason that is still not recognised by my mac Airport Utility is with the Mac version (iphone version). After I use a Windows utility or get Mac/iPhone to see it, I will every day pray for your health, dear Matt!
Probably you need to recap some capacitors but at the same time using an oscilloscope to test the lens.
would love to see a full video of changing the belt for the cd drawer. have started disassembling my dn1800f, but quickly gets complicated without good instructions.
I have a 2000MK3 and a 2100F that both need belt kits. I haven't been able to find a good place in the US to get the belts, nor find instructional videos.
@@drewjcomo purchased belt on ebay i think
Hi friend, I just came across your VDO. I have a question. I have a Denon 2000f mk2 and a Denon 2500F but the 2500F My CD tray wouldn't play, so I took the CD tray from my 2000f mk2. Put it in the 2500F machine instead. It appears that the power goes into the CD and reads the disc, but no sound comes out. I would like to know what is causing the sound to not be output. Or is it because of the Main PCB? It's a different model, but I saw the Main PCB for the 2000F model on Ebay. I can buy it to fit it. 2000F mk2? Now I want to revive an old CD player that I used to play with a long time ago. Please help with any suggestions. Thank you in advance.
Hey Matt. I have the MKIII and the cd drawers open and close but the disc does not spin . It does seem to lock in place but nothing. Is that the belt do you think?
Does the switch register the closed door? Otherwise it will still think it’s empty amad not spin up.
@@wellhiddenmatt Good point. I shall test your theory. Thanks.
Not showing body opening
consulta se me a despegado la goma del cue de una denon 4500 sabrias como hacer para pegar dicha goma desde ya gracias
I'm having the exact same issue in 2022 and your video just pointed me in the right direction. Mine does multiple flashes, wants to start up but apparently can't. The two caps have minor bulging so I'm going to start by exchanging those and we'll see. Thanks for making this video!
I just bought one for a quid , car boot . Not working . Will try to fix as you have , bit of fun . Now where are my free spare caps , i put them safe somewhere .
Nice one. If that doesn’t work there are tutorials to replace the power section. The wifi extender and airplay function is still useful even now.
@@wellhiddenmatt I already have 3 airport extremes from CEX between £8 and £12 each . They are still perfect extenders for my house , WiFi everywhere . This , if it gets mended , is for a printer . May as well get another for the stereo from CEX for £5 too . Thanks , in advance , for the help .
The spindle motor not turning cause its not getting 5volts from the power board.
Finally, any solution? I have the same problem
Wow! I really like how you solve problem after problem so easily. One of my CD drives goes straight back in when it reaches the end position. Do you have any tips on how to fix this?
I’m not sure about that, but I’ll finally be doing a part 2 video this weekend. I’m only a few years late. I’ll see if I can replicate your problem. Off the top of my head it could be the same problem. If the belt is loose it might not have enough power in it to push the tray all the way out so it automatically closes again.
Hello again! Now I have bought another Denon 2000F. One sled moves slowly and gets stuck before it reaches the end position. Any tips?
Hi I have a DN-2100F only my left not working very slow to get in the light stay green but reading any suggestions.Thx
You don't really need a region switch to play a japanese cd game cuz' all I needed was that card and I was able to play Rondo of Blood. I just wanna' know if the rgb mod that's put on your turbografx will still play cd games without composite in the back.
I’m looking for the answer too. Need to know if the cds games run with the RGB signal too.
@@zeroxdogma I'm told it can but the audio exits one way so to get cd audio from the cd unit, you need an audio out on the TG, then hook it to the CD unit. Its confusing. Right now, its being modded so I'll understand it when its done. Then when he shows the pictures, I'll put in a video request for Long Island Retro Gaming to show how to get RGB on this console + cd addon.
Is there a part 2?
Thanks for the vid , i just picked up a DENON DN-1800F with the same issue . thanks for the heads up on the belt !
Did you ever get this sorted? I have the same problem on my CLD 2950 from time to time but I just have to keep inserting discs until it plays and then it just goes away again
I know this is an old video but still useful. my device runs hot suspect caps may need replacing.
That's an interesting way of doing it. I've just done the RGB mod but via a MS1 connector.
What kind of grease do you use on these?
The best is Molykote, or a white lithium grease. Do NOT use something like WD40 as that will start to destroy the plastic.
@@wellhiddenmatt Thanks! (I figured that about WD40) That's why I thought I'd ask what you liked. I figured others might like to know too. Which model of MolyKote do you find works best for the CD players? Spray or tube grease?
@@griggsnichols9988 tube grease it’s much easier to apply. You can scoop it from the tube with a cocktail stick or small screwdriver and apply it just to the parts you need it.
@@wellhiddenmatt Molykote 44?
Where did u bought the replacement capacitors from and what is the exact volts or other numbers on the capacitor thanks
Hi there, you can buy capacitors from any electrical wholesale shop. In the UK CPC Farnell or RS components are the usual. Or from eBay. Good quality capacitor makes are rubycon, nichicon or Panasonic. For the voltage and capacitance it’s written on the side you can always go with a higher voltage NEVER lower. And it’s also important that the capacitance is also the same.
Does having the old HD adapter put a bottle neck on the HD speed?
Thanks. Replacing the capacitors on the Power supply Board repaired my Airport express. I used a cutter knife and a bit of time to open the housing, which made gluing the housing back together easier.
Glad you got it fixed.
Yeah these old AE with the HP jack were super handy. Way ahead of their time. I remeber my roomie and I in college being able to easily change change the music in our Pad, and we had decent I turned throughout the house before most of my pleb classmates.
Where did u bought the replacement items any name etc or item names will be helpful thanks
cl-iMac-tic!
iMac-ulate video!
Thank you!! Here's to more vids!!!
Excellent. After 13 years mine broke in the described way. Opening up the device is the hardest part. 2 new capacitors and all up and running again. Thanks for great explanation and video. Up cycling is so satisfying.
Glad to help. I actually have plans for another one of these that I took apart years ago. Video of that coming soon.
Opening the ultrasonically welded housing parts is the difficult part. I used milly putty to bring it back to a nice one piece part.
thank you- thought I had a bad laser. here's a good tip, folks- get your working area as quiet as possible, so you can hear (what I couldn't hear) the motor on one side labouring to close the door, which looked shut to me. the switch was fine, but the drawer latch wasn't coming over far enough. when the other side started doing it too, I woke up.... changed both of the tiny belts (inside the front of the drawer) & away it went.
I have the same problem. What is the size of the rubber belts?
Hello, hope you managed to fix this beauty!
Does anyone know the difference between the 2000nf, MK2, and MK3? Which one is better?
The mk2 control unit is different. It uses a lcd screen instead of vfd. Also the MK2 doesn’t have jog wheels. Just buttons. So technically the mk3 is better. But only slightly.
Did you ever submit PART 2 ? I would like to see if any of the units had sound output issues. Thanks JwgK
Hi there. I should do a part 2. I have had no sound problems with my units. It was only belt problems. With the tray mechanisms.
@@wellhiddenmatt Thanks, yes belts do age and become sticky or lose their elasticity. My issue is electronic on the drive #2 RCA output ( right channel only ). I can hear the music but with crackly static. I did some re-soldering which worked short term. It returned once I screwed the cover back on and attached the cord to my mixer. Next is breaking out the VOM and start schematic path. I will inform if I find the culprit component. JwgK
I have the same problem. You say that the problem was a loose pulley, but you are pointing to a belt. Are there supposed to be two belts in there? Or did you just change the old belt to a new and tighter one?
Hi, sorry. Yes I said pulley I meant belt. I just put new belts in. Nothing too tight though. Just a little smaller than the old stretched one.
@@wellhiddenmatt Thank you for answering! I'll try new belts asap :-) They worked fine the last time I used them (10 years ago). New belt and some grease on the sliding parts coming up :-)
@@wellhiddenmatt I think mine have perished. What is the diameter of the belt? I would like to have new ones ready before I open the unit.
I couldn't fins new ones. I bought regular rubber bands but they where to big. So I found some small rubber hairbands for little girls, and two of those together worked well.
Mixed Square Cassette Tape Belt Machine Recorder Rubber Belt 25/30/35/38/40/45/50/55/60/65MM Assorted Common Belt Repair Rebuild for Repair Maintenance - Black (Packs of 30)
Thanks for a pro video. A lot of those still in service. I've lost count of how many came here with bad discs so I always ask first if another disc was tried..any that make their way here I always clean and lube that toggle switch tho. The other thing is that white ribbon cable. In a couple cases I had to clean the contacts with a Q tip, contact spray, and a little WD40.. I got few with damaged contacts that looked like they were forced out of the connector without unlocking it..was able to trim the cable back and make new contacts and they have not come back..
my tv no power
I have a Proscan, same EXACT problem! Still works every...10th try? ;( Cleaned laser with rub. alc. no go. Ugh!
The original system internally mixes sound from the CD player for RF output. Why doesn’t yours for AV output?
Very helpfull! Mechanics work on mine. CD plays and tracks, but no sound on either player! Where would you start?
Laser pickup. Don’t take the laser pick up out. Because your never get it in line again. Give the lens a clean if that don’t work then you need a new pickup. You just can’t put a new pickup in and think it will work. You need oscilloscope plus a test disc and service manual. Laserdisc is not like a CD player and is hard to put everything inline.
Why new laser doesn't work with this even if it's the same model?
@@Retirednolongeractive because as I said it might be new but it need Calibrating and you need special tools and oscilloscope. Laserdisc is not like a CD player at all.
@@michaelmitchell8218as far as I’m concerned “new” laser that we bought online were actually recycled units correct me if I’m wrong. I was given a Pioneer CLD-3380 LD player by a friend of mine which doesn’t work anymore as it would not read LD or CD so I decided to bring it to my local technician for inspection but before that the lens had red light on it. So what do you think it’s the problem?
kzread.info/dash/bejne/eWZ8pKlweNW_Z9Y.htmlsi=DDV2xhQYEhFGJzyl
@@michaelmitchell8218 ok thanks. Btw are u in the laserdisc forever facebook group?
Hi, very nice video, thanks! could you make a video to explain (or just explain with text) how to adjust the tray, I can not settle mine and I can't find the service manual (Denon DN-2000F MK3). Thank you in advance :-)
This is a very helpful video, thanks! I'm trying to fix my DN-2000F MK3 CDJs, but can't find the service manual for it. I wish I knew how you got the door off of the CD tray, or else if you know where I can find the service manual.
Hi there, The door unclips from underneath. There are two little clips about one quarter in on each side on the bottom. Just slide the front upwards from either side and it should pop off. Hope this helps
Hi, my friend, I'm having the same problem with the suitcase engine. Did you solve the problem of your everdrives?
The way to solve it is to send the TBED to Krikkz. He will reflash the fpga with different memory timings for PC Engine. I'm currently waiting for a second one to come direct from him. I want the second one so that I have one for my PC Engine and one for my Turbografx-16
@@wellhiddenmatt ok tank you
@@igorcast500 Hi there, Just a follow up to confirm that my second one that was sent from Krikkz works perfectly with all my PC Engines.
I thank you sir.
Opening a case like this should not destroy it when you know how. This is the type you have to crack open cause there is a bit of glue in the groove. You only have to take a large but slim flat screwdriver and knock on the groove with a hammer such a way to crack open the groove-glued. Then, ply appart. I did so many times (small black psu, modem, remote, etc.) Be patient, secure the device not to move, watch your fingers. It saves the box.
Thank u for this video👍🏼