Why go brushed if you upgraded the gearbox anyways? 😂❤
@allanjohnsen103411 ай бұрын
That is such a cool car ! I am just in a build process with this. Thanks for the upgrade tips ;)
@allanjohnsen1034 Жыл бұрын
Just Bought one ... could not resist ... Total Classic
@craigpimlott204 Жыл бұрын
Them ball diffs suck not had one yet that doesn’t keep,coming loose ..waste of money
@raceduckracing Жыл бұрын
Hi…that's strange, i've had it in my "daily rocker" for 2 years and it still works perfectly after at least 100 hours... from time to time it needs a service and an adjustment...
@craigpimlott204 Жыл бұрын
@@raceduckracing mine keeps coming loose after a few minutes running .I’ve tried different loctites .even super glue on the adjusting nut but it just won’t stay locked .it’ll run for a few minutes and then just stops dead while the motor spins .but there’s no drive .I’ve tried two or three of them after getting them replaced .I’m only running a torque tuned in it ,not a brushless system either.I just went back to the stock drive after getting fed up of taking the shaft off ,farting around with a 1.5 mm Allen key to tighten it ,putting the shaft back on every few minutes .is yours the mk1 version or the mk2 like mine ?
@raceduckracing Жыл бұрын
@@craigpimlott204 Hi…mine is the MK2 too. Did you grease it befor you assembled it? As written, i use the Ball diff. in my Daily rocker and it works very propper without problems.
@Kaffee9966 Жыл бұрын
Tolles Auto! Ist die Eisenmann Anlage die Classic Line als Sport oder als Race Variante?
Hi, I've been dreaming to have a Sand Scorcher. Are all your upgrades are Tamiya Brand? If not can you tell where to buy it? Thanks for the great video. 👍
@raceduckracing Жыл бұрын
Hi Jojo, The most „hop ups“ like the additional bearing, the stabillzer or the metall front and rear bumper are self made…or from 3th part stores like the full metall rims (rc-channel) or the dashboard (custom-cuts)
@jojopri22 Жыл бұрын
@Raceduck Racing Thanks and good to know. When time comes, I hope you can still give some advice/pointers to make my Scorcher like real thing. Good luck and keep up with your Channel.
@RenoLaringo Жыл бұрын
This was cool but way too fast to read without pausing the video every 10sec.
@raceduckracing Жыл бұрын
Hi Reno, you are right and if I make another follow up video (of course I have other extensions installed on the scorcher) it will be better. This video was a "project" for my son, he wanted to participate in making a youtube video, thats why i registered at YT. I'm not a professional KZreadr as you can see from my other videos and I'm surprised myself at the response so far
@RenoLaringo Жыл бұрын
@@raceduckracing That is great. You guys did a very nice work and it must have been a ton of fun doing that with your son. I watched the video 3 times because of the text speed hence my comment. But it also means I really wanted to know bcse it was very interesting 👍🙏
@planker Жыл бұрын
If it smelled like Nitro that would be cool. Batteries just suck the life out of toys.
@kougerat5388 Жыл бұрын
Top work sir, some very nice touches you've done.
@MrBiscuit_WithButter Жыл бұрын
I will buy the re-boot kit because it was the very first RC car I owned.
@rcboughtandrebuild92692 жыл бұрын
Nice build
@raceduckracing2 жыл бұрын
I got some messages about the orange MANN stickers. Since unfortunately all the stickers that you can buy are not correct (wrong dimensions and/or writing) I made them myself on water transfer film. An original, unrestored MANN oil filter housing from 1968 served as a template. The stickers are now perfect in shape and colour.
@356Maniac2 жыл бұрын
Geiler Sound. Gibt es da auch was für den 356er?
@356Maniac2 жыл бұрын
Auf der Seite gefunden! Danke für den Link!
@wordreet2 жыл бұрын
Hehe, I gave someone one of these for xmas. Have to send then this vid now!
@duydinhnguyen62252 жыл бұрын
I have a gearbox make alloy for this buggy if you ever need it please let me know I sell all my rc hotshot tamiya 1985 Plus kyosho rampage, sandmaster, kyosho Rb5, kyosho rb nitro all vintage
@ckgrc2 жыл бұрын
Great RC!!😁
@mattridge59862 жыл бұрын
Looks fab.. Have you thought about the inner fender liners? But great all the same...
@hermannbeinhauer85222 жыл бұрын
Ich weiss, so schoen war nicht, als er vom Band lief. Tolles Video. Keep on going!
@356Maniac2 жыл бұрын
Schönes Video! Und wunderschönes Auto! Einen 912er zu besitzen ist noch ein großer Traum von mir! Viel Spass weiterhin damit und weiter so mit den Videos!
@HORSTTV2 жыл бұрын
Da gibts von mir den ersten Daumen hoch. Porsche 912, alles andere ist Behelf. :-)
@raceduckracing2 жыл бұрын
Horst…da sag ich doch mal Dankeschön 🙂
@xanderfrench40112 жыл бұрын
Any recommendations for suspension mods? Id like to get some better shocks. Also did you find the diff to be helpful? Great video cheers
@raceduckracing2 жыл бұрын
Hi Xander, i exchanged the o-rings for silicone ones and installed the shock absorbers upside down. Thats all. The original shock absorber works still pretty good (...and there are 45-50 powerpacks on it meanwhile ) I use 200 oil in the wintertime and 350-400 oil in the summertime. The Diff i think is an must have. Without it, it is almost impossible to drive a fast curve without tipping over. I still have the first one in there and it works still great :-)
@GeckoRC2 жыл бұрын
This Car is amazing! Thanks for sharing :) I'm a Scorcher Fan too and built my own one from a Neo-Fighter Chassis. kzread.info/dash/bejne/ia6ass6pk7nLY6g.html
@brickmissing82952 жыл бұрын
Cool mod - but I’m guessing front wheel friction makes little difference to a sand scorcher since the front wheels barely touch the ground most of the time.
@raceduckracing2 жыл бұрын
Hi, you got the point…thats why i made all these (and some more) mods, to get an proper road holding. With this „less as possible“ clearance at the front the scorcher runs straight ahead also at higher speed and steering is more accurate. Of course…in rough terrain its still hopping, but not this hard as before
@rogelio29312 жыл бұрын
hi, would you be able to tell me the height with the antenna?
@thomasherrmann95182 жыл бұрын
You have really made a good build. I can't find suitable ball bearings for the front axle for zero clearance in steering and suspension, can you tell us the size of the bearings ...
@raceduckracing2 жыл бұрын
Hi Thomas, i made an extra Video for the front axles setup...there are all measurements in., just look in my (very , very small) channel :-) By the way ... yesterday I had to change the engine because it was extremely worn after more than 40 battery charges (3600Ma) and I also had to change the lower forearms because both were broken after a very strong chrash ... but the axle shafts and ball bearings are running still without any clearance
@thomasherrmann95182 жыл бұрын
Shortly after i sent you my question, i wake up from my construction fever and called up your video list on your channel !. I'm so excited about the chassis and your upgrades, I'm finally forgetting the world around me. Thanks for your quick and qualified answer ... Thomas ...
@mikesrcgarage2 жыл бұрын
Very nice trans...
@mikesrcgarage2 жыл бұрын
Wow that is so awesome! The Scorcher was my first kit build RC and a favorite one at that! I still miss it to this day and often want to replace it. I built mine in late 1979 and had it for many years! It even sat on the shelf of a hobby shop for several years on display, but sadly when times got hard as they often do I sold it! Don't sell yours it's beautiful! Nice job!
@g-manracer19972 жыл бұрын
My story is the same, and I always wanted to replace it. It was never quite as great as other RC cars of the 80s, but Tamiya models were always the best looking, and most realistic, and that was always what made me love this model.
@a.gamingandunboxingandcrea90103 жыл бұрын
wow
@willi196713 жыл бұрын
Nice paintjob + Super wheels + Super motor = Super Scorcher
@raceduckracing3 жыл бұрын
Thank you, its far from what else is shown on youtube ...but it was fun to built it :-)
@rcadventuresunlimited3 жыл бұрын
very nice sand scorcher, great work
@homeworkpictureshq3 жыл бұрын
Nice.... Co see my rc videos
@martinfretwell3 жыл бұрын
Nice work I'm going to build mine soon how do you fit light to it .thanks
@raceduckracing3 жыл бұрын
Hi, frontlights ar easy...backlights are a lot of work, you need to drill out the case and glue in the backlight glas (comes as clear glas with the Bodykit and needed to be colored, i used bulbcolor for that)
@mickfitz763 жыл бұрын
I just bought a scorcher and was looking for tips on KZread. Just want to say thanks for making me broke in the future. Sweet set up I have a long way to go.
@raceduckracing3 жыл бұрын
Hi Mick, happy to help 😊 if you have some specific questions dont hesitate 👍
@andrewrcmadwilkinson69993 жыл бұрын
HPI FIREBOLT MOTOR EXCELLENT MOTOR WHAT TYPE OF BATTERY ARE YOU RUNNING
@raceduckracing3 жыл бұрын
Hi there, the engine is the Tamiya super stock BZ (with ball bearings) and the battery is an 2s Lipo pack from Arrow. At the moment i use the new TBLE-04SR ESC, if you use an TBLE-02S, you need an additional fan.
@andrewrcmadwilkinson69993 жыл бұрын
1 PERSON DISLIKED THIS WTF NO SOUL
@angrypants76193 жыл бұрын
Dislike your comment for SHOUTING
@paulk26993 жыл бұрын
Gibt es n link zum Auspuff ? Viele liebe Grüße!
@raceduckracing3 жыл бұрын
ist in der Beschreibung angefügt
@ericchristopher90373 жыл бұрын
I have had 2 of these, the first in the 80s as a teenager, the second about 5 years ago, sold it 2 years ago to a thief.
Пікірлер
Wow rc❤
Why go brushed if you upgraded the gearbox anyways? 😂❤
That is such a cool car ! I am just in a build process with this. Thanks for the upgrade tips ;)
Just Bought one ... could not resist ... Total Classic
Them ball diffs suck not had one yet that doesn’t keep,coming loose ..waste of money
Hi…that's strange, i've had it in my "daily rocker" for 2 years and it still works perfectly after at least 100 hours... from time to time it needs a service and an adjustment...
@@raceduckracing mine keeps coming loose after a few minutes running .I’ve tried different loctites .even super glue on the adjusting nut but it just won’t stay locked .it’ll run for a few minutes and then just stops dead while the motor spins .but there’s no drive .I’ve tried two or three of them after getting them replaced .I’m only running a torque tuned in it ,not a brushless system either.I just went back to the stock drive after getting fed up of taking the shaft off ,farting around with a 1.5 mm Allen key to tighten it ,putting the shaft back on every few minutes .is yours the mk1 version or the mk2 like mine ?
@@craigpimlott204 Hi…mine is the MK2 too. Did you grease it befor you assembled it? As written, i use the Ball diff. in my Daily rocker and it works very propper without problems.
Tolles Auto! Ist die Eisenmann Anlage die Classic Line als Sport oder als Race Variante?
Servus, Details gerne per PN an „[email protected]“
Hi, I've been dreaming to have a Sand Scorcher. Are all your upgrades are Tamiya Brand? If not can you tell where to buy it? Thanks for the great video. 👍
Hi Jojo, The most „hop ups“ like the additional bearing, the stabillzer or the metall front and rear bumper are self made…or from 3th part stores like the full metall rims (rc-channel) or the dashboard (custom-cuts)
@Raceduck Racing Thanks and good to know. When time comes, I hope you can still give some advice/pointers to make my Scorcher like real thing. Good luck and keep up with your Channel.
This was cool but way too fast to read without pausing the video every 10sec.
Hi Reno, you are right and if I make another follow up video (of course I have other extensions installed on the scorcher) it will be better. This video was a "project" for my son, he wanted to participate in making a youtube video, thats why i registered at YT. I'm not a professional KZreadr as you can see from my other videos and I'm surprised myself at the response so far
@@raceduckracing That is great. You guys did a very nice work and it must have been a ton of fun doing that with your son. I watched the video 3 times because of the text speed hence my comment. But it also means I really wanted to know bcse it was very interesting 👍🙏
If it smelled like Nitro that would be cool. Batteries just suck the life out of toys.
Top work sir, some very nice touches you've done.
I will buy the re-boot kit because it was the very first RC car I owned.
Nice build
I got some messages about the orange MANN stickers. Since unfortunately all the stickers that you can buy are not correct (wrong dimensions and/or writing) I made them myself on water transfer film. An original, unrestored MANN oil filter housing from 1968 served as a template. The stickers are now perfect in shape and colour.
Geiler Sound. Gibt es da auch was für den 356er?
Auf der Seite gefunden! Danke für den Link!
Hehe, I gave someone one of these for xmas. Have to send then this vid now!
I have a gearbox make alloy for this buggy if you ever need it please let me know I sell all my rc hotshot tamiya 1985 Plus kyosho rampage, sandmaster, kyosho Rb5, kyosho rb nitro all vintage
Great RC!!😁
Looks fab.. Have you thought about the inner fender liners? But great all the same...
Ich weiss, so schoen war nicht, als er vom Band lief. Tolles Video. Keep on going!
Schönes Video! Und wunderschönes Auto! Einen 912er zu besitzen ist noch ein großer Traum von mir! Viel Spass weiterhin damit und weiter so mit den Videos!
Da gibts von mir den ersten Daumen hoch. Porsche 912, alles andere ist Behelf. :-)
Horst…da sag ich doch mal Dankeschön 🙂
Any recommendations for suspension mods? Id like to get some better shocks. Also did you find the diff to be helpful? Great video cheers
Hi Xander, i exchanged the o-rings for silicone ones and installed the shock absorbers upside down. Thats all. The original shock absorber works still pretty good (...and there are 45-50 powerpacks on it meanwhile ) I use 200 oil in the wintertime and 350-400 oil in the summertime. The Diff i think is an must have. Without it, it is almost impossible to drive a fast curve without tipping over. I still have the first one in there and it works still great :-)
This Car is amazing! Thanks for sharing :) I'm a Scorcher Fan too and built my own one from a Neo-Fighter Chassis. kzread.info/dash/bejne/ia6ass6pk7nLY6g.html
Cool mod - but I’m guessing front wheel friction makes little difference to a sand scorcher since the front wheels barely touch the ground most of the time.
Hi, you got the point…thats why i made all these (and some more) mods, to get an proper road holding. With this „less as possible“ clearance at the front the scorcher runs straight ahead also at higher speed and steering is more accurate. Of course…in rough terrain its still hopping, but not this hard as before
hi, would you be able to tell me the height with the antenna?
You have really made a good build. I can't find suitable ball bearings for the front axle for zero clearance in steering and suspension, can you tell us the size of the bearings ...
Hi Thomas, i made an extra Video for the front axles setup...there are all measurements in., just look in my (very , very small) channel :-) By the way ... yesterday I had to change the engine because it was extremely worn after more than 40 battery charges (3600Ma) and I also had to change the lower forearms because both were broken after a very strong chrash ... but the axle shafts and ball bearings are running still without any clearance
Shortly after i sent you my question, i wake up from my construction fever and called up your video list on your channel !. I'm so excited about the chassis and your upgrades, I'm finally forgetting the world around me. Thanks for your quick and qualified answer ... Thomas ...
Very nice trans...
Wow that is so awesome! The Scorcher was my first kit build RC and a favorite one at that! I still miss it to this day and often want to replace it. I built mine in late 1979 and had it for many years! It even sat on the shelf of a hobby shop for several years on display, but sadly when times got hard as they often do I sold it! Don't sell yours it's beautiful! Nice job!
My story is the same, and I always wanted to replace it. It was never quite as great as other RC cars of the 80s, but Tamiya models were always the best looking, and most realistic, and that was always what made me love this model.
wow
Nice paintjob + Super wheels + Super motor = Super Scorcher
Thank you, its far from what else is shown on youtube ...but it was fun to built it :-)
very nice sand scorcher, great work
Nice.... Co see my rc videos
Nice work I'm going to build mine soon how do you fit light to it .thanks
Hi, frontlights ar easy...backlights are a lot of work, you need to drill out the case and glue in the backlight glas (comes as clear glas with the Bodykit and needed to be colored, i used bulbcolor for that)
I just bought a scorcher and was looking for tips on KZread. Just want to say thanks for making me broke in the future. Sweet set up I have a long way to go.
Hi Mick, happy to help 😊 if you have some specific questions dont hesitate 👍
HPI FIREBOLT MOTOR EXCELLENT MOTOR WHAT TYPE OF BATTERY ARE YOU RUNNING
Hi there, the engine is the Tamiya super stock BZ (with ball bearings) and the battery is an 2s Lipo pack from Arrow. At the moment i use the new TBLE-04SR ESC, if you use an TBLE-02S, you need an additional fan.
1 PERSON DISLIKED THIS WTF NO SOUL
Dislike your comment for SHOUTING
Gibt es n link zum Auspuff ? Viele liebe Grüße!
ist in der Beschreibung angefügt
I have had 2 of these, the first in the 80s as a teenager, the second about 5 years ago, sold it 2 years ago to a thief.
Hammermaessiges Teil!