Another beautiful Ercoupe. I love it for it’s simplicity and the fact we were both made in 1946
@jimmurphy2273 Жыл бұрын
Great Music also.
@joewilliams4142 Жыл бұрын
I’ve been trying to add smoke for years. My FSDO wants a diagram or anything from some that’s done it. I have a 415C as well. An you tell me more ?? The smoke kit company does not have one for the Ercoupe. I am N2601H. Thanks
@jerrycalvert8592 Жыл бұрын
"War Bug" is now officially the coolest Ercoupe in existance! Good job buddy!
@clarencewatson6226 Жыл бұрын
Absolutely Beautiful Aircraft… Can’t wait to get one after I get my PPL.
@av8r1946 Жыл бұрын
Thank you! They are a great aircraft
@clarencewatson6226 Жыл бұрын
Love the panel layout and Epic Music!!! 👍👍👍
@av8r1946 Жыл бұрын
Thank You!
@johnmckenna8989 Жыл бұрын
....Ercoupes are great for air to air photography.....I shot 16mm film from mine (TV news film)...I'd circle the subject and shoot at 48fps or 64 fps with a Bolex and Vario-Switar lens....Banking steep for wide open panoramic sequences from an open cockpit......Nothing could compare to that, except a helicopter (maybe)....415C....CF-RGD...
@av8r1946 Жыл бұрын
That must have been a great mission for an Ercoupe, thank you for sharing!
@mannyg9059 Жыл бұрын
These Ercoupes seem no larger than modern radio control models. Can you fly these small aircraft in other than perfect flying weather conditions? " Toy coffins" Nevertheless, you did a great job restoring it.
@av8r1946 Жыл бұрын
The Ercoupe is a solid built aircraft. It was built to such a strength that the US army used it to test JATO propulsions, the army mounted 6 rockets to the belly of the Ercoupe in order to achieve a short takeoff and high climb. The Ercoupe can fly in almost all weather, it is capable of flying in such high winds that would keep most other aircraft grounded.
@larrymarshall8156 Жыл бұрын
Very sharp looking coup!!!
@coincidentalrvadventures2081 Жыл бұрын
Voice over would be nice.
@lynnkramer1211 Жыл бұрын
Cool. It would sure let other pilots know where you are in the pattern. I would be tempted to write messages in restricted airspace around DC and I'd get grounded by the FAA for that. Question, do you need to clean any residue from the fuselage after using it?
@av8r1946 Жыл бұрын
Yes, lol, If I were flying in DC I'd have a three-letter acronym to write... That was my main concern with the polished aluminum however It does not leave any residue or oil as long as you have the valve set properly.
@ercoupeadventures2545 Жыл бұрын
Very cool 😎 What system is it and how long did it take to install?
@jimwolc7479 Жыл бұрын
Smoke- system- Helper 3gallon tank about 8 hours to install
@terrallputnam7979 Жыл бұрын
I really like the paint job with the polished aluminum.
@gymshoe8862 Жыл бұрын
Why would anyone portray the Ercoupe as a military plane--that's not funny!
@av8r1946 Жыл бұрын
The USAAF used the Ercoupe for the first RATO tests, the CAP used Ercoupes to search for German U-boats along the coast, the Alaska national guard used Ercoupes for Officer transport… those are just the published roles of military use. I’m sure your a halfway smart person, therefore, In the future do a little research before making negative comments so you don’t sound so dimwitted.
@Geriatric_Gaming2 жыл бұрын
Probably the most beautiful aircraft I have ever seen. Great job! If you ever decide to sell, please let me know!
@av8r19462 жыл бұрын
Thank you sir! She’s an amazing bird!
@pjsministry73162 жыл бұрын
Beautiful Ercoupe. Hopefully someday my coupe will look that 👍. Your brother ercouper Billy
@lawsonlaslo32832 жыл бұрын
Thank your sir!
@shawnmahler99922 жыл бұрын
I think I saw this plane up at Sundance at the last EAA Young Eagles event, but maybe not.......Great looking plane either way.
@lawsonlaslo32832 жыл бұрын
Yessir that was was me! I am based out at Sundance. Thank you, I appreciate it!
@lynnkramer12112 жыл бұрын
You got a nice head. Why not use your time to talk about what you are doing during a flight? Are you adding throttle? Are you adding carb heat? what is you air speeds while landing? How do you set yourself up for a nice landing or takeoff? Just watching a guys head bobble for 33 minutes get old though.
@av8r19462 жыл бұрын
Sorry but I’d rather be flying than spending my time typing out a script for a KZread video. There are millions of flying videos on KZread, go find a different one if this is too boring… Thanks for your kind remarks
@lynnkramer12112 жыл бұрын
Every one of these has a different instrument panel layout. go figure.
@lynnkramer12112 жыл бұрын
Very nice flying I wouldn't actually know because I have not found a suitable plane near me in Boise to purchase. I have a broker working on the problem. I would like to ask some questions. Would you be up to giving your impressions to queries? 1. Are Ercoupes easier to learn to fly than say a Cherokee 140? 2. Are instructors easy to find to instruct someone interested in owning one? 3. How does the FAA treat Ercoupe pilots (new ones)? 4. it like doing maintenance and buying spares for it? Ny son is a brand new A&P. I was too, 40 years ago. I have soloed in a C150 in the late 70's but never go licensed (life).
@av8r19462 жыл бұрын
1. The ercoupe is definitely an easy and very simple airplane to fly, Cherokees have heavier control force (requiring constant trimming) and can be more difficult to land and more systems to operate typically (flaps, nav, fuel…). I first started my training in a Cherokee than finished in my Ercoupe. I do think it’s good to get a few hours in a Cherokee just to have that experience and perspective. 2- I never had an issue finding a instructor to teach in the Ercoupe, all my instructors had no experience in the ercoupe but had no issue learning the airplane and instructing. Most instructors that teach at flight schools wouldn’t mind freelancing outside of their flight school for you. 3- my ercoupe does have the rudder pedals STC so I have no restrictions on my license, if your is the original 2 axis control and you take the checkride in that airplane than you will have a 2 control limit on your PPL thus you can only fly Ercoupes. 4- the Ercoupe is a simple aircraft to work on, the hardest part id say is working under the instrument panel due to the lack of space. Univair supplies most parts for the ercoupe and a gentleman named Vernon Gregory has an ercoupe “graveyard” and has almost any part you will ever need for the ercoupe The ercoupe is a great airplane and would definitely recommend it If you have any more questions feel free to respond or you can also email me at [email protected]
@kenthompson37302 жыл бұрын
Did you attend the National and fly into OSH?
@av8r19462 жыл бұрын
I did not last year, although I am planning to fly the Ercoupe up to Oshkosh in 2022 for the first time
@kenthompson37302 жыл бұрын
Excellent job, Lawson. I look forward to seeing “WarBug” in person some day.
@av8r19462 жыл бұрын
Thank you! Planning to fly it up to Oshkosh for Airventure 2022, hope to see you there!
@randalljohns37192 жыл бұрын
Nice seeing Sundance again. In 1984 I was the very first Line Attendant hired at the not yet completed airport. Love these Ercoupe videos.
@av8r19462 жыл бұрын
Awesome! We love Sundance, its a great airport and has an amazing community.
@crooked-halo2 жыл бұрын
Gorgeous airplane and beautiful restoration, but the left-side panel does not look good, and the silent, dis-jointed video was not done well.
@av8r19462 жыл бұрын
Video was made for a presentation at an EAA meeting thus the lack of sound. Not sure what you don’t like about the left side of the cockpit? It has the Alon square panel which i believe gives it a nice WW2 fighter look
@kenthompson37302 жыл бұрын
The panel is exactly right for an Ercoupe with the Alon panel update. Give the owner a break. How many 16 year old kids do you know who have bought and restored an antique plane in lieu of his first car?
@crooked-halo2 жыл бұрын
@@kenthompson3730 I just don't like the way the panel looks. Everything else is amazing, with my one opinion on the appearance of that panel, which is a minor criticism.
@flyvxy2 жыл бұрын
Glad to see you back in the air/channel.
@av8r19462 жыл бұрын
Thank you! I actually posted this video a few months ago but just realized yesterday I never made it public. I’ve been doing a lot of Ercoupe Flying lately, also just finished the annual today. I will be posting a video with clips from formation flying I’ve been doing with the Ercoupe!
@Planes_n_trains2 жыл бұрын
I'd love to come over, and get some pictures of your plane.
@av8r19462 жыл бұрын
That would be great You can email me at [email protected] and we can meet up sometime. Maybe you could get some air to air photos as well, my buddies got a Cub that would be a great plane to take photos out of
@homertalk3 жыл бұрын
What's the useful load?
@av8r19463 жыл бұрын
Empty weight is 930 Max is 1400 So useful load is about 470
@flyvxy3 жыл бұрын
Did you do you check ride yet? By the way does your bird have rudder pedals? Thanks!
@av8r19463 жыл бұрын
Yes sir, had it on February 1st! The ‘Coupe does have rudder pedals
@flyvxy3 жыл бұрын
@@av8r1946 Congrats and thanks for getting back to me. I am in the process of getting a Coupe myself which should be a done deal by end of June. It is a Model D conversion with the O-200 and rudder pedals. I'd love to pick your brain about your experience as I am still a student pilot and will be switching my training from a PA-28 Cherokee 151 Warrior to the Ercoupe once I actually own it. My name is Vic Yordan and I live in Central Florida. My email is [email protected]. Hope we can connect. BTW are you a member of the Ercoupe Owners Club? Thanks again! VY
@av8r19463 жыл бұрын
Just emailed, yes I am in the EOC👍🏼
@johnjasinski61453 жыл бұрын
I see you got a quick shot of my Tomahawk as well. Nice video.
@av8r19463 жыл бұрын
Awesome! I do remember checking out your Tomahawk, what airport is it based out of?
@johnjasinski61453 жыл бұрын
@@av8r1946 CE Page, just west of Yukon.
@lawsonlaslo32833 жыл бұрын
@@johnjasinski6145 nice we are just a couple miles apart, im at Sundance. I fly down to Page quite often.
@johnjasinski61453 жыл бұрын
@@lawsonlaslo3283 When I get the Tomahawk put back together (engine is out for overhaul), lets go flying.
@av8r19463 жыл бұрын
@@johnjasinski6145 sorry my reply was posted from my other KZread page, this is Lawson Laslo That would be great! You can email me at [email protected] and we can exchange phone numbers etc👍🏼
@Rance1203 жыл бұрын
Awesome video! I’m not a pilot, but have seen you fly around OKC 👍🏼
@av8r19463 жыл бұрын
Awesome! Do you live near Sundance airport? Or do you see me when I’m flying around the city?
@kevincummins62893 жыл бұрын
I was a previous owner of this aircraft! I am so pleased and excited to see the fabulous restoration and that she is flying again.
@av8r19463 жыл бұрын
We are very excited to bring it down this spring and let you see it in person again!
@kenthompson37303 жыл бұрын
Awesome, Lawrence! Well done! Please post this on the Ercoupe Facebook page.
@av8r19463 жыл бұрын
Thank you! -Lawson
@barrygrant29073 жыл бұрын
Loved the paint & polish. Good job on saving a fine aircraft.
@av8r19463 жыл бұрын
Thank you! Hoping there will be some more fly-ins this year to bring it to!
@gregorybrown40623 жыл бұрын
Please do a video on it's unique window-doors.
@markanthony6533 жыл бұрын
Every time I see that you're a coupe ,,,,I like that plane a lot !! I think too much
@av8r19463 жыл бұрын
Thank you Mark
@JoeCoolPilot3 жыл бұрын
Nice video! Thanks for sharing! Fly safe!
@av8r19463 жыл бұрын
Thank you
@lynnkramer12113 жыл бұрын
That was one cool flight by a really skilled Ercoupe pilot.
@av8r19463 жыл бұрын
Thank you Lynn!
@lynnkramer12113 жыл бұрын
No offense intended but your camera's sound recording is about the lousiest I have heard on KZread ever. I would not use this for a sales video when that time comes. I was searching for one, but I would pass on this one just because it sounds like a disaster.
@av8r19463 жыл бұрын
Sorry about that, I was using a new editing software I think it messed the with sound frequencies some how. What do you mean by a sales video? I have many other videos on my page and if you need I can even custom record a video to your requests
@lynnkramer12112 жыл бұрын
@@av8r1946 I have heard of cases when lithium batteries are the reason for bad audio recourdings.
@joewilliams50723 жыл бұрын
So, your coupe breaks a stall at 70mph ? Really ? Wow. Not mine.
@av8r19463 жыл бұрын
Haha, that’s ground speed, must of had a good tailwind. Mine breaks at 41mph
@larryporter80623 жыл бұрын
I had an Ercoupe based at Page 50 years ago while I was in college. So much fun. Thanks for the video. I still live in OKC about 4 miles from Sundance.
@av8r19463 жыл бұрын
Awesome! They are a joy to fly What was your N number?
@homertalk3 жыл бұрын
Good Luck!
@av8r19463 жыл бұрын
Thank you!
@alk633 жыл бұрын
Good for you! Glad you have gotten into flying early in your life. Started my time at 55 years of age and have missed all the additional joy and fun that you are having and will have in the years ahead. Very proud of you and wish you the absolute best in life.
@av8r19463 жыл бұрын
Thank you Al!
@Planes_n_trains3 жыл бұрын
If you're ever feeling bored, and just feel like going somewhere, swing on by Cordell, I'd love to check out, and get some pictures of your plane.
@stevenvicino86873 жыл бұрын
What's wrong with this picture? I grew up in N2078H, a '46 Ercoupe. That panel looks an awful lot like an Alon instrument panel. A landing light? My dad would have had to tape a flashlight to the strut. Nevertheless I love Ercoupes in any form. I'm jealous and I mean no disrespect.
@av8r19463 жыл бұрын
So I believe all Ercoupes with the electrical system had the landing gear mounted landing light, and later on people would mount them inside The wing for better aerodynamics. And yes this Ercoupe has been modified with Alon panel.
@kenthompson37302 жыл бұрын
My landing lights are actually mounted in the nose bowl. No drag lime on the gear mounted lights.
@JamesGood3 жыл бұрын
Very cool, love the sunset formation shots!
@av8r19463 жыл бұрын
Thank you James
@kenthompson37303 жыл бұрын
Really nice, Lawson. Love the plane. Hope to see you in Shawnee in October.
@av8r19463 жыл бұрын
Thank you Ken We will be there! See you in 2 months!
@dcrahn4 жыл бұрын
I'm not a pilot but I would love to find one of these that needs restoration. This is right up my alley, I'm a retired Senior Mastercraftman that worked for GAC for 42 years. I miss working on planes.
@kenthompson37303 жыл бұрын
There are a lot of project Ercoupes out there, just waiting to be resurrected. If you do Facebook, join “Ercoupe Owners and Enthusiasts.” It’s a great Group. Also, check Barnstormers.com and Tradeaplane.com.
@juandigital20034 жыл бұрын
very nice! I love the visibility that airplane provides. Looks like the attitude indicator is INOP
@tylerives74104 жыл бұрын
What kind of polishing system do you use? I just bought an Ercoupe last week :) (Also, if you don't mind me asking, how much did the shoulder harness conversion cost you?)
@av8r19464 жыл бұрын
Congratulations! I use nuvite c with a normal buffer from harbor freight, I then use nuvite s with the cyclo polisher (the cyclo helps to remove the tiger stripes that will be seen in the sun)
@tylerives74104 жыл бұрын
@@av8r1946 That's great to hear! I was about to move forward with the Nuvite stuff. I'll shoot you some pictures once I get it all polished up ;)
@av8r19464 жыл бұрын
👍🏼 Awesome Would also love to see what it currently looks like My email is [email protected]
Пікірлер
This footage looked awesome
Another beautiful Ercoupe. I love it for it’s simplicity and the fact we were both made in 1946
Great Music also.
I’ve been trying to add smoke for years. My FSDO wants a diagram or anything from some that’s done it. I have a 415C as well. An you tell me more ?? The smoke kit company does not have one for the Ercoupe. I am N2601H. Thanks
"War Bug" is now officially the coolest Ercoupe in existance! Good job buddy!
Absolutely Beautiful Aircraft… Can’t wait to get one after I get my PPL.
Thank you! They are a great aircraft
Love the panel layout and Epic Music!!! 👍👍👍
Thank You!
....Ercoupes are great for air to air photography.....I shot 16mm film from mine (TV news film)...I'd circle the subject and shoot at 48fps or 64 fps with a Bolex and Vario-Switar lens....Banking steep for wide open panoramic sequences from an open cockpit......Nothing could compare to that, except a helicopter (maybe)....415C....CF-RGD...
That must have been a great mission for an Ercoupe, thank you for sharing!
These Ercoupes seem no larger than modern radio control models. Can you fly these small aircraft in other than perfect flying weather conditions? " Toy coffins" Nevertheless, you did a great job restoring it.
The Ercoupe is a solid built aircraft. It was built to such a strength that the US army used it to test JATO propulsions, the army mounted 6 rockets to the belly of the Ercoupe in order to achieve a short takeoff and high climb. The Ercoupe can fly in almost all weather, it is capable of flying in such high winds that would keep most other aircraft grounded.
Very sharp looking coup!!!
Voice over would be nice.
Cool. It would sure let other pilots know where you are in the pattern. I would be tempted to write messages in restricted airspace around DC and I'd get grounded by the FAA for that. Question, do you need to clean any residue from the fuselage after using it?
Yes, lol, If I were flying in DC I'd have a three-letter acronym to write... That was my main concern with the polished aluminum however It does not leave any residue or oil as long as you have the valve set properly.
Very cool 😎 What system is it and how long did it take to install?
Smoke- system- Helper 3gallon tank about 8 hours to install
I really like the paint job with the polished aluminum.
Why would anyone portray the Ercoupe as a military plane--that's not funny!
The USAAF used the Ercoupe for the first RATO tests, the CAP used Ercoupes to search for German U-boats along the coast, the Alaska national guard used Ercoupes for Officer transport… those are just the published roles of military use. I’m sure your a halfway smart person, therefore, In the future do a little research before making negative comments so you don’t sound so dimwitted.
Probably the most beautiful aircraft I have ever seen. Great job! If you ever decide to sell, please let me know!
Thank you sir! She’s an amazing bird!
Beautiful Ercoupe. Hopefully someday my coupe will look that 👍. Your brother ercouper Billy
Thank your sir!
I think I saw this plane up at Sundance at the last EAA Young Eagles event, but maybe not.......Great looking plane either way.
Yessir that was was me! I am based out at Sundance. Thank you, I appreciate it!
You got a nice head. Why not use your time to talk about what you are doing during a flight? Are you adding throttle? Are you adding carb heat? what is you air speeds while landing? How do you set yourself up for a nice landing or takeoff? Just watching a guys head bobble for 33 minutes get old though.
Sorry but I’d rather be flying than spending my time typing out a script for a KZread video. There are millions of flying videos on KZread, go find a different one if this is too boring… Thanks for your kind remarks
Every one of these has a different instrument panel layout. go figure.
Very nice flying I wouldn't actually know because I have not found a suitable plane near me in Boise to purchase. I have a broker working on the problem. I would like to ask some questions. Would you be up to giving your impressions to queries? 1. Are Ercoupes easier to learn to fly than say a Cherokee 140? 2. Are instructors easy to find to instruct someone interested in owning one? 3. How does the FAA treat Ercoupe pilots (new ones)? 4. it like doing maintenance and buying spares for it? Ny son is a brand new A&P. I was too, 40 years ago. I have soloed in a C150 in the late 70's but never go licensed (life).
1. The ercoupe is definitely an easy and very simple airplane to fly, Cherokees have heavier control force (requiring constant trimming) and can be more difficult to land and more systems to operate typically (flaps, nav, fuel…). I first started my training in a Cherokee than finished in my Ercoupe. I do think it’s good to get a few hours in a Cherokee just to have that experience and perspective. 2- I never had an issue finding a instructor to teach in the Ercoupe, all my instructors had no experience in the ercoupe but had no issue learning the airplane and instructing. Most instructors that teach at flight schools wouldn’t mind freelancing outside of their flight school for you. 3- my ercoupe does have the rudder pedals STC so I have no restrictions on my license, if your is the original 2 axis control and you take the checkride in that airplane than you will have a 2 control limit on your PPL thus you can only fly Ercoupes. 4- the Ercoupe is a simple aircraft to work on, the hardest part id say is working under the instrument panel due to the lack of space. Univair supplies most parts for the ercoupe and a gentleman named Vernon Gregory has an ercoupe “graveyard” and has almost any part you will ever need for the ercoupe The ercoupe is a great airplane and would definitely recommend it If you have any more questions feel free to respond or you can also email me at [email protected]
Did you attend the National and fly into OSH?
I did not last year, although I am planning to fly the Ercoupe up to Oshkosh in 2022 for the first time
Excellent job, Lawson. I look forward to seeing “WarBug” in person some day.
Thank you! Planning to fly it up to Oshkosh for Airventure 2022, hope to see you there!
Nice seeing Sundance again. In 1984 I was the very first Line Attendant hired at the not yet completed airport. Love these Ercoupe videos.
Awesome! We love Sundance, its a great airport and has an amazing community.
Gorgeous airplane and beautiful restoration, but the left-side panel does not look good, and the silent, dis-jointed video was not done well.
Video was made for a presentation at an EAA meeting thus the lack of sound. Not sure what you don’t like about the left side of the cockpit? It has the Alon square panel which i believe gives it a nice WW2 fighter look
The panel is exactly right for an Ercoupe with the Alon panel update. Give the owner a break. How many 16 year old kids do you know who have bought and restored an antique plane in lieu of his first car?
@@kenthompson3730 I just don't like the way the panel looks. Everything else is amazing, with my one opinion on the appearance of that panel, which is a minor criticism.
Glad to see you back in the air/channel.
Thank you! I actually posted this video a few months ago but just realized yesterday I never made it public. I’ve been doing a lot of Ercoupe Flying lately, also just finished the annual today. I will be posting a video with clips from formation flying I’ve been doing with the Ercoupe!
I'd love to come over, and get some pictures of your plane.
That would be great You can email me at [email protected] and we can meet up sometime. Maybe you could get some air to air photos as well, my buddies got a Cub that would be a great plane to take photos out of
What's the useful load?
Empty weight is 930 Max is 1400 So useful load is about 470
Did you do you check ride yet? By the way does your bird have rudder pedals? Thanks!
Yes sir, had it on February 1st! The ‘Coupe does have rudder pedals
@@av8r1946 Congrats and thanks for getting back to me. I am in the process of getting a Coupe myself which should be a done deal by end of June. It is a Model D conversion with the O-200 and rudder pedals. I'd love to pick your brain about your experience as I am still a student pilot and will be switching my training from a PA-28 Cherokee 151 Warrior to the Ercoupe once I actually own it. My name is Vic Yordan and I live in Central Florida. My email is [email protected]. Hope we can connect. BTW are you a member of the Ercoupe Owners Club? Thanks again! VY
Just emailed, yes I am in the EOC👍🏼
I see you got a quick shot of my Tomahawk as well. Nice video.
Awesome! I do remember checking out your Tomahawk, what airport is it based out of?
@@av8r1946 CE Page, just west of Yukon.
@@johnjasinski6145 nice we are just a couple miles apart, im at Sundance. I fly down to Page quite often.
@@lawsonlaslo3283 When I get the Tomahawk put back together (engine is out for overhaul), lets go flying.
@@johnjasinski6145 sorry my reply was posted from my other KZread page, this is Lawson Laslo That would be great! You can email me at [email protected] and we can exchange phone numbers etc👍🏼
Awesome video! I’m not a pilot, but have seen you fly around OKC 👍🏼
Awesome! Do you live near Sundance airport? Or do you see me when I’m flying around the city?
I was a previous owner of this aircraft! I am so pleased and excited to see the fabulous restoration and that she is flying again.
We are very excited to bring it down this spring and let you see it in person again!
Awesome, Lawrence! Well done! Please post this on the Ercoupe Facebook page.
Thank you! -Lawson
Loved the paint & polish. Good job on saving a fine aircraft.
Thank you! Hoping there will be some more fly-ins this year to bring it to!
Please do a video on it's unique window-doors.
Every time I see that you're a coupe ,,,,I like that plane a lot !! I think too much
Thank you Mark
Nice video! Thanks for sharing! Fly safe!
Thank you
That was one cool flight by a really skilled Ercoupe pilot.
Thank you Lynn!
No offense intended but your camera's sound recording is about the lousiest I have heard on KZread ever. I would not use this for a sales video when that time comes. I was searching for one, but I would pass on this one just because it sounds like a disaster.
Sorry about that, I was using a new editing software I think it messed the with sound frequencies some how. What do you mean by a sales video? I have many other videos on my page and if you need I can even custom record a video to your requests
@@av8r1946 I have heard of cases when lithium batteries are the reason for bad audio recourdings.
So, your coupe breaks a stall at 70mph ? Really ? Wow. Not mine.
Haha, that’s ground speed, must of had a good tailwind. Mine breaks at 41mph
I had an Ercoupe based at Page 50 years ago while I was in college. So much fun. Thanks for the video. I still live in OKC about 4 miles from Sundance.
Awesome! They are a joy to fly What was your N number?
Good Luck!
Thank you!
Good for you! Glad you have gotten into flying early in your life. Started my time at 55 years of age and have missed all the additional joy and fun that you are having and will have in the years ahead. Very proud of you and wish you the absolute best in life.
Thank you Al!
If you're ever feeling bored, and just feel like going somewhere, swing on by Cordell, I'd love to check out, and get some pictures of your plane.
What's wrong with this picture? I grew up in N2078H, a '46 Ercoupe. That panel looks an awful lot like an Alon instrument panel. A landing light? My dad would have had to tape a flashlight to the strut. Nevertheless I love Ercoupes in any form. I'm jealous and I mean no disrespect.
So I believe all Ercoupes with the electrical system had the landing gear mounted landing light, and later on people would mount them inside The wing for better aerodynamics. And yes this Ercoupe has been modified with Alon panel.
My landing lights are actually mounted in the nose bowl. No drag lime on the gear mounted lights.
Very cool, love the sunset formation shots!
Thank you James
Really nice, Lawson. Love the plane. Hope to see you in Shawnee in October.
Thank you Ken We will be there! See you in 2 months!
I'm not a pilot but I would love to find one of these that needs restoration. This is right up my alley, I'm a retired Senior Mastercraftman that worked for GAC for 42 years. I miss working on planes.
There are a lot of project Ercoupes out there, just waiting to be resurrected. If you do Facebook, join “Ercoupe Owners and Enthusiasts.” It’s a great Group. Also, check Barnstormers.com and Tradeaplane.com.
very nice! I love the visibility that airplane provides. Looks like the attitude indicator is INOP
What kind of polishing system do you use? I just bought an Ercoupe last week :) (Also, if you don't mind me asking, how much did the shoulder harness conversion cost you?)
Congratulations! I use nuvite c with a normal buffer from harbor freight, I then use nuvite s with the cyclo polisher (the cyclo helps to remove the tiger stripes that will be seen in the sun)
@@av8r1946 That's great to hear! I was about to move forward with the Nuvite stuff. I'll shoot you some pictures once I get it all polished up ;)
👍🏼 Awesome Would also love to see what it currently looks like My email is [email protected]