Пікірлер

• 
  @JBlaze881414 сағат бұрын

  Great video. Thanks bro

• 
  @miriij.karanja2787Ай бұрын

  Curious, is this compatible with the following; 1. Dell P2722H 2. DELL Docking Station Mounting Kit MK15??

• 
  @hometech457220 күн бұрын

  The mounting kit seems to have click to release type latch.. but the mda20 doesn't have that, it has vesa plate adapter and screw in place of the release button. Regarding the monitor, 27 inch isn't a problem.

• 
  @reigncrowns4959Ай бұрын

  I bought the same model. How can you lower the height?

• 
  @hometech457223 күн бұрын

  On the arms, there will be a + - marking, in that you can insert an Allen key, and adjust the spring loaded screw, I think as you do do the - side, the arm will become lighter and you'll be able to move it up and down.

• 
  @amareshsatАй бұрын

  Model number?

• 
  @hometech457223 күн бұрын

  It's F-160.

• 
  @LorianixАй бұрын

  Thank you! I needed this guide 😭

• 
  @amitsehgal83172 ай бұрын

  Hello how is the quality you after 5 month , pls share

• 
  @hometech4572Ай бұрын

  Same as day 1. No degradation noted. 👍

• 
  @salmabelcourt2 ай бұрын

  Would you say it’s heavy to use?

• 
  @hometech45722 ай бұрын

  We won't be lifting it, just moving to and fro and to the side. It's definitely less manoverable than a vacuum cleaner. I think it's meant to be like that. Like if we spend 5 seconds to do one swipe from wall to wall with a cordless vacuum, with this we'll be spending 30s to do the one swipe. The good thing is the floor will be 95 percent dry instantly.

• 
  @salmabelcourt2 ай бұрын

  Would you consider this a vacuum and mop in one? Do you need a vacuum cleaner if you have this?

• 
  @hometech45722 ай бұрын

  It's not a vacuum, sorry. If you use this without vacuuming first, you'll end up unsatisfied and probably clogg the dirt water filter.

• 
  @salmabelcourt2 ай бұрын

  @@hometech4572 ok thank you

• 
  @dasunalwis34892 ай бұрын

  Why do you walk like that man 😂

• 
  @coolmanu552 ай бұрын

  hi mate, thanks for the video. may I know which pressure bottle is best for this ? I heard even RYOBI pressure can is compatible and best over ozito foam can as ozito is smaller ? any advise. do we need a 1 Litre can or 600ml can be enough for a SUV foam car wash ?

• 
  @hometech45722 ай бұрын

  Here you go mate : a.aliexpress.com/_mKpnuYS Choose option D. They are sold together. Just a note the adapter laches at right angle, ie. If the bottle is facing down, the sprayer gun will be facing sideways, like an AK with side mag. But not a big problem for me. I think you can see that it the video as well.

• 
  @coolmanu552 ай бұрын

  @@hometech4572 ya noticed it, thanks for the update. one more thing, i spoke with a detailer and he said to use bowden's snow job foam wash, so that you dont have to do a hand wash again. Just spray it with the pressure washer, let is sit for 5 mins and spray with water. thats all,. it will remove all the dust and the contaminatioins with the foam. Try it and see to avoid hand wash what you are doing in the video. i dont like the right angle, got the bowden's snow canon which is fitting perfect, but that is expensive. still ok as it sits with proper straight position. I got it at 25% discount at repco. so bit ok. got it at 70$ something. thanks for the tip.

• 
  @vishin1352 ай бұрын

  It's wrong information I guess

• 
  @hometech45722 ай бұрын

  May be newer models works differently.

• 
  @tharcisseilunga66583 ай бұрын

  Merci

• 
  @ertui57473 ай бұрын

  My problem when I pull the monitor down it goes up

• 
  @MarceloQueizo3 ай бұрын

  You have to loosen a screw that is in the arm socket, articulated, look for it and see what you can find.

• 
  @hometech45722 ай бұрын

  Loosen the screw just right, then we'll be able to move the monitor up and down with a gentle push

• 
  @tubeyou100ful4 ай бұрын

  Company name ?

• 
  @hometech45722 ай бұрын

  Just bought it in temu

• 
  @NeilTheBoss124 ай бұрын

  10:35 how did you manage to get that on I'm struggling too lmao

• 
  @hometech45722 ай бұрын

  Yeah. I spent quite a lot of time getting it right, if you see my other video - Northbay AU dual arm setup, I first fix the arm to the display and then mount the arm to the pole. It's much easier that way.

• 
  @NeilTheBoss122 ай бұрын

  @@hometech4572 I found out that the MDA protrudes beyond the desk (my desk is against the wall) so I bought 2 MSAs instead. Also the arms are not compatible with S series monitor, but only with P or U series. I use dual U2723QEs now.

• 
  @wrends6 ай бұрын

  very clean!

• 
  @hometech45722 ай бұрын

  Appreciate it!

• 
  @brooklynant20476 ай бұрын

  The attachment plates are in a backward type of position when you unbox the product. Do you tilt or move them by force into position or should you even do that? Plus they look like they have this coil thing. Wrapped around them. Do you need to take it off? The manual doesn’t cover this so I don’t want to do the wrong thing by mistake. Any advice?

• 
  @hometech45722 ай бұрын

  Yes, they are safe to tilt. Pretty much every joint has freedom of movement, but need to push them a bit.

• 
  @oye_itx_lky7 ай бұрын

  Maximum ram support? And frequency?

• 
  @Shashwat23043 ай бұрын

  Upto 16 gb @1333mhz

• 
  @hometech45722 ай бұрын

  I don't remember how much ram they've got. The laptop is just lying around. 🙂

• 
  @MuffFlux7 ай бұрын

  The only thing we want to see is the stability/wobble...

• 
  @hometech45722 ай бұрын

  I don't have any wobble problems for normal usage.

• 
  @AlbertZora7 ай бұрын

  Where did u get the foam bottle from and which brand does it fit on it

• 
  @hometech45722 ай бұрын

  Here you go mate : a.aliexpress.com/_mKpnuYS Choose option D. They are sold together. Just a note the adapter laches at right angle, ie. If the bottle is facing down, the sprayer gun will be facing sideways, like an AK. But not a big problem for me. I think you can see that it the video as well.

• 
  @melissafrost46837 ай бұрын

  Skips key steps like how to unscrew to open 4 and can’t see a lot of the time - how far do the legs need to be? Instructions are awful and this video is. Not much better 🤯

• 
  @hometech45722 ай бұрын

  Yeah. The instruction manual wasn't great. I did what i could do. Regarding the max length between the legs, its determined by the aluminium rod. Extended the aluminium rod to max, then do a trial fitting before locking the bridge screws, adjust as needed.

• 
  @pranavrathore97158 ай бұрын

  can it work with one 27 curved and 29 inch ultra wide

• 
  @hometech45722 ай бұрын

  Sorry no idea. Better to find a friend who has a dual arm setup and do a trial before before buying

• 
  @davehitchman51718 ай бұрын

  Really good, lasted a year before I needed to disassemble and replace the pump for the water and 6 months more before the battery died.

• 
  @aysecayir99888 ай бұрын

  Teşekkürler gösterdiğiniz için.Ben de yeni almıştım aynısından ama içinde kullanma kılavuzu yoktu.Çok faydalı olmuş,segi ve selamlar.🙏

• 
  @malathynarasimhan53428 ай бұрын

  Nice.very useful product in my house.thank you ma vijay.

• 
  @geoffpriestley73108 ай бұрын

  Hi I have a tcl t799h that won't charge. Done the usual things charger lead and charger they charge my other phones and tablets. It points to a faulty charge socket on the phone is this repairable or should I just scrap it

• 
  @hometech45722 ай бұрын

  TCL phones are inexpensive. It it has served one year, just buy a new one. No point fixing things these days as the parts are becoming expensive

• 
  @donjuan32968 ай бұрын

  Would've liked to see how much they can go up. Do you think I can use a monitor under them? I want to lift 2 monitors up my main one, but I don't know if they'll reach that high.

• 
  @TheEngineer198 ай бұрын

  yes you can..watching the video, its sad his monitor has no DP.

• 
  @hometech45722 ай бұрын

  I had a 27inch monitors on top, and 15.6 inch laptop. The laptop wouldn't go all the way back. It's mentioned in the end of the video. 😢

• 
  @gurudattadighe31969 ай бұрын

  I was thinking of making a pouch with cotton or nylon but ig it would rot. Pls advise which material to use

• 
  @hometech45729 ай бұрын

  The name of the material that I used is unknown. Actually I bought a huge sofa recliner and it came as packaging material. I think it's called non woven fabric. Attaching a Amazon link for reference: www.amazon.com/gzqirun-Protection-Antifreeze-Blankets-Weather/dp/B09FKH8Z72

• 
  @gurudattadighe31969 ай бұрын

  @@hometech4572 thnks bro it means a lot

• 
  @hometech45722 ай бұрын

  I also found a better way to join them, nowadays I'm using iron box and paper to heat seal the non woven fabric instead of stitching

• 
  @hometech45722 ай бұрын

  I also found a better way to join them, nowadays I'm using iron box and paper to heat seal the non woven fabric instead of stitching

• 
  @gurudattadighe31962 ай бұрын

  @@hometech4572 ooh great

• 
  @Lorazengarden9 ай бұрын

  Thank you! I have a similar feeder and the instructions are horrible! Your instructions worked like a charm!

• 
  @sckettch11 ай бұрын

  Thank you, this was so helpful! The instructions my feeder came with were so bad.

• 
  @balakrishnan482711 ай бұрын

  Thank you for your guidance 🖖

• 
  @hometech457211 ай бұрын

  Always welcome

• 
  @mfmf869111 ай бұрын

  Tcl 10pro ki display tut gya h kha milega plzz reply krna

• 
  @hometech457211 ай бұрын

  Idhar : a.aliexpress.com/_mKkbwKi

• 
  @bigo9465 Жыл бұрын

  Hi, I'm having a question about the balance (around 14:20min). Is it about the adjustment of the weight of the monitor or about the adjustment of the arm?

• 
  @hometech4572 Жыл бұрын

  Hi. Yeah, it's about the adjustment of the weight of the monitor (how easy or difficult is it to lift up or push down with a single finger).. Ill explain with a example, Think of the counter balance as a spring loaded garage shutter. Garage shutter is about 100+kgs, yet we are able to lift it up and put it down easily because of the pre tensioned spring in them.

• 
  @bigo9465 Жыл бұрын

  @@hometech4572 Ah nice, I was worried as I'm using a 34 ultra widescreen on this arm lol. I finally know now, thanks

• 
  @manshaurrahman3305 Жыл бұрын

  I did all this 5 years ago

• 
  @hometech4572 Жыл бұрын

  Nice

• 
  @farrukhamjad3813 Жыл бұрын

  Its a good thing

• 
  @Sxwq_6580 Жыл бұрын

  Hello, where did you buy the rear case? Can you leave a link?❤️

• 
  @hometech4572 Жыл бұрын

  a.aliexpress.com/_msvyMEE

• 
  @rakeshkumarpatel6377 Жыл бұрын

  give me link for cloning tool

• 
  @hometech4572 Жыл бұрын

  This article has steps and also link to the tool that I used. www.ubackup.com/clone/clone-dual-boot-hard-drive.html

• 
  @bigrabbit5617 Жыл бұрын

  I have two different size monitors, I will based on my work to use which monitor. Let said left one is A, right one is B. May I ask this arm can Swift the monitor A B to B A?

• 
  @hometech4572 Жыл бұрын

  After fixing the displays, we cannot move the arms to completely interchange their places, the monitors will dash into each other. But I can recommend a solution: Each monitor has two HDMI inputs, so you can have 4 cables total, taking inputs from devices in any desired order.

• 
  @officeimpact6377 Жыл бұрын

  Ty I needed this

• 
  @maytsar Жыл бұрын

  How to switch on my TCL Plex mobile phone? It's charging. The battery shows 91 %. But the switch button doesn't work. Is there any volume button combination or something like that to switch on or reboot my mobile?

• 
  @hometech4572 Жыл бұрын

  You can press and hold the power button for like 5 seconds. It should boot up. There are some android standard recovery key combinations but we don't need that as long as the phone was working fine until recently.

• 
  @AnthonyLol Жыл бұрын

  Does the pressure washer use a M22 connection?

• 
  @hometech4572 Жыл бұрын

  Nah. I don't think so, haven't seen any screw threads on the gun.

• 
  @mayurchaudhari811 Жыл бұрын

  Please Share link of ssd you used from Amazon india

• 
  @hometech4572 Жыл бұрын

  Sorry this was bought from an international seller

• 
  @Shryquill Жыл бұрын

  Excellent video, amd thank you especially for covering the manual diagrams at the end!

• 
  @hometech4572 Жыл бұрын

  Glad it was helpful!

• 
  @narasimhanrangasamy5158 Жыл бұрын

  Execllent

• 
  @hometech4572 Жыл бұрын

  AU folks : www.ebay.com.au/itm/234054795585?mkcid=16&mkevt=1&mkrid=705-154756-20017-0&ssspo=YHtaEBwVRSe&sssrc=2349624&ssuid=fnpc4zncrjg&var=&widget_ver=artemis&media=COPY I bought two more recently. Looks neat.

• 
  @pixelatedpigeon4617 Жыл бұрын

  Buying a bidet was my pandemic revelation, lol. Everyone should have one.

• 
  @skyfoxnz Жыл бұрын

  Yeah Can you share the link where you got the foam cannon please? Cheers!

• 
  @hometech4572 Жыл бұрын

  Here you go mate : a.aliexpress.com/_mKpnuYS Choose option D. They are sold together. Just a note the adapter laches at right angle, ie. If the bottle is facing down, the sprayer gun will be facing sideways, like a bicycle handle. But not a big problem for me. I think you can see that it the video as well.

• 
  @skyfoxnz Жыл бұрын

  @@hometech4572 Hey thanks! I placed an order. Any recommendation for the foam liquid for car? Can I get them from bunnings?

• 
  @hometech4572 Жыл бұрын

  @@skyfoxnz Good ones are not there in Bunnings. Ebay : Meguiar's gold class. www.ebay.com.au/itm/162024913773?mkcid=16&mkevt=1&mkrid=705-154756-20017-0&ssspo=FLSYwsE3RgS&sssrc=2349624&ssuid=fnpc4zncrjg&var=&widget_ver=artemis&media=COPY

• 
  @hometech4572 Жыл бұрын

  @@skyfoxnz Great foam, but it doesn't have wax. You may need to apply some protector or polisher to create a layer.

• 
  @nicholasprophet1810 Жыл бұрын

  Do you have a link for the foam cannon and adaptor for this model that you bought on Ali Express?

• 
  @hometech4572 Жыл бұрын

  Here you go mate : a.aliexpress.com/_mKpnuYS Choose option D. They are sold together. Just a note the adapter laches at right angle, ie. If the bottle is facing down, the sprayer gun will be facing sideways, like a bicycle handle. But not a big problem for me. I think you can see that it the video as well.

• 
  @Jay_2023 Жыл бұрын

  @@hometech4572easy way to fix the right angle problem is to buy the quick disconnect adapter. Thread both side in the click they together.

• 
  @hometech45722 ай бұрын

  ​@@Jay_2023hi, where to get the quick disconnect adapter. Any links pls

• 
  @malathynarasimhan5342 Жыл бұрын

  Very useful to all . Super.

• 
  @narasimhanrangasamy5158 Жыл бұрын

  Very nice.