Mine still wont close. Is one light supposed to be yellow? And ine green? Or both supposed to be green?
@Garagedoormedia12 минут бұрын
One should be solid yellow. The other should be solid green, but the green one is the one that will go out or blink. Check for a cut wire or bend them till they make a solid connection.
@blown50313 күн бұрын
can you open this maxum jdc with an app on your phone? I know it does regular liftmaster hand held remotes but was wondering is the WiFi just for trouble shooting.
@Garagedoormedia11 күн бұрын
Yes it works with the myq app. That’s one of their big selling points
@marcusisawsome27 күн бұрын
This video just saved me from burning down the entire garage in frustration. Thank you so much
@Garagedoormedia27 күн бұрын
This is why I made the videos. Glad they could help
@CoilsRBeautifulMekaJАй бұрын
Thank you!
@pathograceАй бұрын
Make sure the lights on both sensors are on. I had one that was off and found the wire got cut.
@GaragedoormediaАй бұрын
That’s good information
@russellschroeder990Ай бұрын
No
@GaragedoormediaАй бұрын
Yes
@melissaclarkson479Ай бұрын
it did not work press and held the *# stopped blinking hit the yellow button the above garage unit than back to program number and enter still boinked hit zero stopped blinking .but doesn't work
@GaragedoormediaАй бұрын
Try just pressing the yellow button and pressing your 4 digit code then enter. See if that works.
@KingCarlos85Ай бұрын
It worked well ty for this video such a lifesaver
@egman52252 ай бұрын
I tried everything, i can't get mine to work in the daylight, i wish I could bypass those things
@Garagedoormedia2 ай бұрын
Try swapping them left and right
@d-v-cez91522 ай бұрын
Corresponding button means you can program three individual remotes: Button I for the first remote, Button II for the second remote, and Button III for the third remote. Each will be done SEPARATELY.
@BradMeyerlive2 ай бұрын
Yo! This worked!
@Lexluger_2 ай бұрын
What if the light just doesn’t turn on?
@Garagedoormedia2 ай бұрын
Could be a broken wire. You can get new ones on Amazon
@Banannaman282 ай бұрын
Keep the name, but do media not just your industry. Garage doors are either open or closed, relate that to media in general, not necessarily media about Garage doors bro, ya feel me
@Garagedoormedia2 ай бұрын
That’s a good spin on it. Thanks
@cattmama11402 ай бұрын
Thank you so much... Worked right away
@Garagedoormedia2 ай бұрын
That’s what I like to hear
@terryboone74552 ай бұрын
Once I program the keypad the key fobs stop working. Any advice and vice versa?
@Garagedoormedia2 ай бұрын
Your opener could be at its max allowed accessories. So it could be losing the remote when the keypad gets programmed. Try erasing everything and starting fresh.
@tampatia72 ай бұрын
Thanks 💯
@masonhansen1612 ай бұрын
Bro lube your door gosh dang
@AmritSingh-jz4hm3 ай бұрын
Thanx buddy, it worked in seconds. Thank you✅
@Garagedoormedia2 ай бұрын
That’s what I like to hear
@NombreApellido-tn7lo3 ай бұрын
En español porfavor
@Garagedoormedia2 ай бұрын
I don’t know Spanish tho
@Cap930123 ай бұрын
get a rolling shutter, only a 10" box above the header
@Garagedoormedia3 ай бұрын
Need R value in New England
@jamesflake66013 ай бұрын
Going to have to give that Spring a few more twists
@Garagedoormedia3 ай бұрын
Naw springs were engineered for this. It’s all in the math
@joshwalsh61943 ай бұрын
Do you guys not use roller doors over there?
@Garagedoormedia3 ай бұрын
Steel rolling curtains? Naw sectionals everywhere
@joshwalsh61943 ай бұрын
@@Garagedoormedia fair enough, here in Australia we have gone more towards this style for aesthetics but for big doors and limited space the older style doors still hold a fair amount of the market. Cheers for replying mate
@corys.77233 ай бұрын
thats a gorgeous custom radius!
@icepl4net4 ай бұрын
3rd party remotes doesnt work sadly
@Garagedoormedia4 ай бұрын
You have to make sure it matches the frequency of the opener
@icepl4net4 ай бұрын
@@Garagedoormedia it does ....433.92
@lovesphynx4 ай бұрын
Holy crap bless you you saved my world problem right now omg amazing
@Garagedoormedia4 ай бұрын
Glad it helped
@havalhasan64634 ай бұрын
Best youtube short in a while. Thank you
@Garagedoormedia4 ай бұрын
Thanks for the compliment
@ericmontanez72764 ай бұрын
Amazing and fast thanks
@Garagedoormedia4 ай бұрын
Anytime
@TomatoWithARifle4 ай бұрын
im so happy im not working on giant commercial springs like that anymore...
@genhid3335 ай бұрын
The traitor
@rickyates574 ай бұрын
And the idiot know nothing. Right here in the comments thread 🖕👍👍👍👍 Trump 2024 😊😂😂😂😂😂😂
@Dragonslice294 ай бұрын
trump 2024
@carey_metv4 ай бұрын
Anybody who supports bIden is a traitor! MAGA 2024!!!
@Garagedoormedia4 ай бұрын
He’s an American hero
@drash44895 ай бұрын
Thank you so much great video
@Garagedoormedia5 ай бұрын
Thanks for the feedback
@kaiwantufiq2045 ай бұрын
Thank for your tip , I got it
@Garagedoormedia5 ай бұрын
Glad it helped
@user-hp5po5po2c5 ай бұрын
Last night, I depressed about it. But I got solved. You save my day and money. Thanks 😊
@Garagedoormedia5 ай бұрын
That’s why I make these videos
@samsquires28775 ай бұрын
That thing is nice…and quiet.
@Garagedoormedia5 ай бұрын
For a commercial motor it’s not too bad
@user-gf7zx8xr6x5 ай бұрын
Will this erase the apps connection with the garage door opener ? Or this is aseparate reset
@Garagedoormedia5 ай бұрын
Pressing and holding the learn button should only erase remotes and keypad. Erasing Wi-Fi/app is different process
@fahaddaleem52685 ай бұрын
I have issue with programming my new chamberlain garage door opener... after installation i tried to program it but the setup looks reverse, when I press the UP button from the opener, it tries to close and vise versa ... any idea what to do??
@Garagedoormedia5 ай бұрын
It sounds like the carrier is reversed on the rail. The nut to tighten the belt should be on the left side of the rail when looking out of the garage.
@qukidonk28085 ай бұрын
Pressing Learn button but nothing happened, anyone know how to fix this?
@Garagedoormedia5 ай бұрын
If no led gets lit then could be a bad board
@westonlee97785 ай бұрын
Will this oppression clear the control buttons on my vehicles too? So I’ll need to reprogram my vehicles garage door buttons? Thank you very much
@Garagedoormedia5 ай бұрын
Yes when you erase with the learn button it erases everything
@Alwaysbetonblack15 ай бұрын
Does this work with universal remotes
@Garagedoormedia5 ай бұрын
Yes but you may have to follow the instructions for the remote
@Garrett-ob1xm5 ай бұрын
Slay
@williambotner23175 ай бұрын
Wait till summer
@Garagedoormedia5 ай бұрын
We shall see 🫣
@RickmoZamms6 ай бұрын
😂😂. 10 minutes later. Its a ceiling of Swiss cheese
@Garagedoormedia6 ай бұрын
Nah. One or two holes. Angle covers the rest.
@williamdavid62836 ай бұрын
What color is the learn button on the 98022?
@Garagedoormedia6 ай бұрын
Yellow. Still the security 2.0+
@ns7w3865 ай бұрын
Yellow and works great with Ratgdo.
@kyleucf6 ай бұрын
RIP❤
@Msbrown-cr4sg6 ай бұрын
Your video saved me money thank you😊
@Garagedoormedia6 ай бұрын
That’s why I make them. No need to pay for simple solutions
@Msbrown-cr4sg6 ай бұрын
I appreciate you
@pennywisenibbles49496 ай бұрын
Sunlight fucks with mine
@proudpennsylvanian3306 ай бұрын
After you enter the code it says press enter until you hear the click. Do you hold a button down until you hear the click or do you continually hit the button until it clicks?
@Garagedoormedia6 ай бұрын
Usually you press the enter repeatedly till it clicks or the light flashes. Sometimes you have to press 0 to save on universal keypads.
@christopherocity13475 ай бұрын
When I hold my pound and star buttons the pad just remains lit. It doesn't blink, can you help?
@bedi095 ай бұрын
It worked. Thank you
@melissaclarkson479Ай бұрын
@@Garagedoormediawhat light flashes the key pad or the above garage unit
@ccarmean856 ай бұрын
That's a spline socket, but probably does come in handy.
@Garagedoormedia6 ай бұрын
Damn your right. Always thought it was a 12 point
@damirbalo15886 ай бұрын
My small led light is just flashing when I press the opener. It doesn’t open or close😢
@Garagedoormedia6 ай бұрын
If it’s the led button on the wall then press and hold the lock button till it’s solid
@corazonhermosa4 ай бұрын
@@GaragedoormediaI think 🤔 he was referring to once you press and release the ‘learn’ button then press the desired button on the opener all that happens is the led light flashes on the opener the garage doesn’t open.
@nicolasheath51286 ай бұрын
If you do a lot of square bolts get a set of 8 point sockets
Пікірлер
Mine still wont close. Is one light supposed to be yellow? And ine green? Or both supposed to be green?
One should be solid yellow. The other should be solid green, but the green one is the one that will go out or blink. Check for a cut wire or bend them till they make a solid connection.
can you open this maxum jdc with an app on your phone? I know it does regular liftmaster hand held remotes but was wondering is the WiFi just for trouble shooting.
Yes it works with the myq app. That’s one of their big selling points
This video just saved me from burning down the entire garage in frustration. Thank you so much
This is why I made the videos. Glad they could help
Thank you!
Make sure the lights on both sensors are on. I had one that was off and found the wire got cut.
That’s good information
No
Yes
it did not work press and held the *# stopped blinking hit the yellow button the above garage unit than back to program number and enter still boinked hit zero stopped blinking .but doesn't work
Try just pressing the yellow button and pressing your 4 digit code then enter. See if that works.
It worked well ty for this video such a lifesaver
I tried everything, i can't get mine to work in the daylight, i wish I could bypass those things
Try swapping them left and right
Corresponding button means you can program three individual remotes: Button I for the first remote, Button II for the second remote, and Button III for the third remote. Each will be done SEPARATELY.
Yo! This worked!
What if the light just doesn’t turn on?
Could be a broken wire. You can get new ones on Amazon
Keep the name, but do media not just your industry. Garage doors are either open or closed, relate that to media in general, not necessarily media about Garage doors bro, ya feel me
That’s a good spin on it. Thanks
Thank you so much... Worked right away
That’s what I like to hear
Once I program the keypad the key fobs stop working. Any advice and vice versa?
Your opener could be at its max allowed accessories. So it could be losing the remote when the keypad gets programmed. Try erasing everything and starting fresh.
Thanks 💯
Bro lube your door gosh dang
Thanx buddy, it worked in seconds. Thank you✅
That’s what I like to hear
En español porfavor
I don’t know Spanish tho
get a rolling shutter, only a 10" box above the header
Need R value in New England
Going to have to give that Spring a few more twists
Naw springs were engineered for this. It’s all in the math
Do you guys not use roller doors over there?
Steel rolling curtains? Naw sectionals everywhere
@@Garagedoormedia fair enough, here in Australia we have gone more towards this style for aesthetics but for big doors and limited space the older style doors still hold a fair amount of the market. Cheers for replying mate
thats a gorgeous custom radius!
3rd party remotes doesnt work sadly
You have to make sure it matches the frequency of the opener
@@Garagedoormedia it does ....433.92
Holy crap bless you you saved my world problem right now omg amazing
Glad it helped
Best youtube short in a while. Thank you
Thanks for the compliment
Amazing and fast thanks
Anytime
im so happy im not working on giant commercial springs like that anymore...
The traitor
And the idiot know nothing. Right here in the comments thread 🖕👍👍👍👍 Trump 2024 😊😂😂😂😂😂😂
trump 2024
Anybody who supports bIden is a traitor! MAGA 2024!!!
He’s an American hero
Thank you so much great video
Thanks for the feedback
Thank for your tip , I got it
Glad it helped
Last night, I depressed about it. But I got solved. You save my day and money. Thanks 😊
That’s why I make these videos
That thing is nice…and quiet.
For a commercial motor it’s not too bad
Will this erase the apps connection with the garage door opener ? Or this is aseparate reset
Pressing and holding the learn button should only erase remotes and keypad. Erasing Wi-Fi/app is different process
I have issue with programming my new chamberlain garage door opener... after installation i tried to program it but the setup looks reverse, when I press the UP button from the opener, it tries to close and vise versa ... any idea what to do??
It sounds like the carrier is reversed on the rail. The nut to tighten the belt should be on the left side of the rail when looking out of the garage.
Pressing Learn button but nothing happened, anyone know how to fix this?
If no led gets lit then could be a bad board
Will this oppression clear the control buttons on my vehicles too? So I’ll need to reprogram my vehicles garage door buttons? Thank you very much
Yes when you erase with the learn button it erases everything
Does this work with universal remotes
Yes but you may have to follow the instructions for the remote
Slay
Wait till summer
We shall see 🫣
😂😂. 10 minutes later. Its a ceiling of Swiss cheese
Nah. One or two holes. Angle covers the rest.
What color is the learn button on the 98022?
Yellow. Still the security 2.0+
Yellow and works great with Ratgdo.
RIP❤
Your video saved me money thank you😊
That’s why I make them. No need to pay for simple solutions
I appreciate you
Sunlight fucks with mine
After you enter the code it says press enter until you hear the click. Do you hold a button down until you hear the click or do you continually hit the button until it clicks?
Usually you press the enter repeatedly till it clicks or the light flashes. Sometimes you have to press 0 to save on universal keypads.
When I hold my pound and star buttons the pad just remains lit. It doesn't blink, can you help?
It worked. Thank you
@@Garagedoormediawhat light flashes the key pad or the above garage unit
That's a spline socket, but probably does come in handy.
Damn your right. Always thought it was a 12 point
My small led light is just flashing when I press the opener. It doesn’t open or close😢
If it’s the led button on the wall then press and hold the lock button till it’s solid
@@GaragedoormediaI think 🤔 he was referring to once you press and release the ‘learn’ button then press the desired button on the opener all that happens is the led light flashes on the opener the garage doesn’t open.
If you do a lot of square bolts get a set of 8 point sockets
Good advice
THANK YOU!!!!