Пікірлер

• 
  @kerimkaraaslan55223 күн бұрын

  honey the new u2 replacment dropped on the 15series

• 
  @MrRufos863 күн бұрын

  what temp do you use for the soldering of the chip ?

• 
  @iBoardRepair3 күн бұрын

  It is individual for each station. I actually don't remember though. Probably 450 - 480c

• 
  @MrRufos863 күн бұрын

  @@iBoardRepair thanks 😊

• 
  @Repairyourmobile72984 күн бұрын

  Hey bro what about android i haven't seen you repairing android devices

• 
  @ANHSEDEIMY5 күн бұрын

• 
  @ANHSEDEIMY5 күн бұрын

  🐔🐔🐔🐔🐔🐔🐔

• 
  @hi-friaudioman5 күн бұрын

  Phew, for a second i thought you were replacing with more 2018 micron. Thank god it was 2019. Lol

• 
  @jozsiolah14356 күн бұрын

  The Apple phones are metal covered and the phone has speaker holes. By placing the phone to a radioactive heavy power bank for 3 days, the phone’s charging discharging can be fixed, the min of the battery life will be better. Placing by facing the holes toward the power bank, the holes let in the radioactive ray to the battery’s panel. The Chinese and Japanese power banks have nuclear radiation to do the fix. Phones without metal cover, you have to put the phone on the power bank facing the batt down. If the pwr bank is smaller than the phone, you have to guess where you put the pwr bank, but near the battery. Each correct fix takes 3 days. When the battery’s own panel is very hot, you fixed the phone, the phone will become cool, the battery’s little chip will become hot instead. The connections must be clean. Best experiment with old Nokia phones, what’s the middle connection is really for.

• 
  @letsgotravel40306 күн бұрын

  swap is more expensive than new iPhone why we need to swap?

• 
  @aliservice007Күн бұрын

  For data recovery Data is more expensive than the phone 📱 👍✅️

• 
  @ivanph81527 күн бұрын

  well done nice info !

• 
  @m1k4c8 күн бұрын

  dude, what a mess :D

• 
  @wasifrazin75609 күн бұрын

  from where do i buy the vram chipset

• 
  @kaziukas199810 күн бұрын

  hi mate what program did you use to determine witch of the vram is bad? got rx 6700xt here so would be amazing to find out what to use to see how many to order :D

• 
  @ANHSEDEIMY13 күн бұрын

  Great video! I love that you didn’t give up and you got it 👍👍👍👍

• 
  @aibi553214 күн бұрын

  why tf putting a standard charger destroyes motherboard

• 
  @Dttbant14 күн бұрын

  Could you help me with my iPhone 14 with salt water damage pleaseeee I need to recover my data before 29 dayssss

• 
  @iBoardRepair14 күн бұрын

  Yes, please fill out the intake form at my website: www.iboardrepair.com

• 
  @hoodedmaster294416 күн бұрын

  Extremely talented guy, hope to be like you!! Never thought Id be so happy to see an apple logo!!

• 
  @i_am_ismail20 күн бұрын

  Pls would it be possible for me to reach out to you privately

• 
  @iBoardRepair19 күн бұрын

  Yes sure, fill out my intake form at my website: www.iboardrepair.com

• 
  @Nassukhan.20 күн бұрын

  Bro why did you touch jumper, when touch GR ok

• 
  @iBoardRepair19 күн бұрын

  It will probably come back for warranty for that issue, so better to just do it now.

• 
  @bruce_fix20 күн бұрын

  nice job👏

• 
  @iBoardRepair19 күн бұрын

  Thank you! Cheers!

• 
  @Family-man_mobile_tech20 күн бұрын

  Hey .. concerning the temperature Error !! .. it’s NTC LINE.. using refox or zxw search and you would see it

• 
  @wasifrazin756021 күн бұрын

  How to get the mats and modds app for the vram chekc Pls say

• 
  @Solder_it21 күн бұрын

  Very good work👍🏻 its very hard.

• 
  @iBoardRepair21 күн бұрын

  Thank you!

• 
  @don4techy21 күн бұрын

  A born surgeon who missed his calling. Good job

• 
  @iBoardRepair21 күн бұрын

  Thank you, I am way to squeamish for that type of work haha.

• 
  @mr.george19522 күн бұрын

  awesome

• 
  @iBoardRepair21 күн бұрын

  Thank you!

• 
  @codyvaladez2924 күн бұрын

  I have the exact problem, can you help? My wife has very sentimental and important stuff on her phone that did not transfer or back up to her new phone? I don't have all the supplies you have to do it myself or I would

• 
  @iBoardRepair24 күн бұрын

  Yes, fill out the intake form at my website: www.iboardrepair.com

• 
  @laalamat24 күн бұрын

  con que windows lo has hecho ? a mi cuando incio el ford obd me sale cant find the key y tengo conectado el usb

• 
  @lightwxrk24 күн бұрын

  from a customer point of view, i can just get my phone warrantied with Apple can I not? so if Apple has a lot of customers warranty-ing their phones because of this, I guess they'll fix the problem with the next iPhone?

• 
  @moshoodolamilekan326124 күн бұрын

  Good job. Pls I have an issue on 15pro max charging, I have changed the charging IC with charging eeprom along side trigris and the phone still showing zero percent remaining, pls can u help

• 
  @hove13125 күн бұрын

  Temp and airflow for re-balling with paste? The stencils always bow and bend up when I try to reball with paste and stencils. Even as low as 250C. Nice work.

• 
  @JakabPatrik26 күн бұрын

  icloud ? unlok proces?

• 
  @aminedz12028 күн бұрын

  I love your work so much keep it up SO Please, sir, can you give me the names of the tools you use to remove the metals and the type of caustic LIKE FLUKE etc please, brother?

• 
  @aminedz12028 күн бұрын

  Give me an answer sir

• 
  @remon_to_you28 күн бұрын

  what microscope do you use? thank you)

• 
  @iBoardRepair28 күн бұрын

  parco trinocular

• 
  @RB-pc7tg29 күн бұрын

  You can always tell who people have learned from as they use the same lingo, equipment and techniques.

• 
  @kinghassan9834Ай бұрын

  On which line you inject the voltages and it goes to dfu mode

• 
  @ferhatkurt8898Ай бұрын

  Good work!

• 
  @jeepers18304Ай бұрын

  this is not a technician issue...customer viewed a couple youtuber repair video and thought they were competent enough to repair it themselves if it was caused by another technician they wouldn't have lied no customer gonna lie to protect an technician

• 
  @don4techyАй бұрын

  Are you sure abt that. You'd be surprised

• 
  @jeepers18304Ай бұрын

  ​​​@@don4techy it's simple bro why would the customer lie about device failing on it own when clearly it was the incorrect screw has caused it to be shorted??? these things are common sense even my son could figure it out

• 
  @A1PhoneAndTechАй бұрын

  Makes logical sense. I could definitely see a customer blaming another repair shop for this type of damage however people buy phones second hand so could be it already had this issue just got worse over time and customer had no clue.

• 
  @kalisisaac9317Ай бұрын

  I am a beginner and I really need to learn what different DCPS amp draws mean. Coz I see when you know what different meter readings mean, it simplifies and the quickens the diagnosis process. Do you have a video about amp draws and their meanings in phone repair please? If you don't have it yet, could you please make us one?

• 
  @iBoardRepairАй бұрын

  You just have to watch all my videos. I don't have one video that combines all of them.

• 
  @arifprasetia8431Ай бұрын

  How i can contact you😢

• 
  @iBoardRepairАй бұрын

  www.iboardrepair.com

• 
  @senjanolabelАй бұрын

  MANA USER YG SUKA NGOMONG DI SOLDER DIKIT DOANG...... TAILAH KALIAN SEMUA

• 
  @Bc-vb8doАй бұрын

  bro how temperature delodering this cpu and air flow?

• 
  @iBoardRepairАй бұрын

  Some of my newer cpu swap videos have temps, watch those.

• 
  @kenzcell2264Ай бұрын

  how many degrees Celsius does the blower heat? Hello bro, I'm from Indonesia.. Your video motivated me to learn to use the CPU👍🙏

• 
  @kenzcell2264Ай бұрын

  take me to be your student teacher🙏 

• 
  @iBoardRepairАй бұрын

  Some of my newer cpu swap videos have temperatures, watch those ones.

• 
  @jeffersonayemenre4925Ай бұрын

  Great job. What thermal cam do you use?

• 
  @iBoardRepairАй бұрын

  seek

• 
  @jeffersonayemenre4925Ай бұрын

  @@iBoardRepair okay

• 
  @jeffersonayemenre4925Ай бұрын

  Just seek or Seek compact or pro?

• 
  @iBoardRepairАй бұрын

  @@jeffersonayemenre4925 compact pro: www.amazon.com/Seek-LQ-AAA-Compactpro-iOS/dp/B07GX8XTG5?keywords=seek%2Bcompact%2Bpro&qid=1680158796&sr=8-2&th=1&linkCode=sl1&tag=scdigital-20&linkId=f80cfe6183913baaf39d10498cdc6747&language=en_US&ref_=as_li_ss_tl

• 
  @jeffersonayemenre4925Ай бұрын

  Okay. Thanks IB. I want to get one.

• 
  @bruce_fixАй бұрын

  that line was PCIE_ST0_AP_BI_NAND_CLKREQ_L

• 
  @iBoardRepairАй бұрын

  Nice! What software are you using has net names for the 12 mini? ZXW doesn't seem to have them. Or are you just referencing another model to find the name?

• 
  @bruce_fixАй бұрын

  @@iBoardRepair i referencing iphone 12 to find the name. that line is 'CB2' pin of A14 cpu

• 
  @bruce_fixАй бұрын

  refox schematic software have net names for 12 mini.i have used it for a while, But i don't remember how accurate it is

• 
  @Bvetube101Ай бұрын

  Good job! 🎉 I recently the other day fixed an SE2 with a problem reporting the battery which showed 0% Charged and Always low battery. A Diode mode reading on I2C3_SMC_GG_SDA and SCL showed a reading on SDA but OL on SCL. Using the board view, I couldn't find schematics anywhere for the SE2 and the SE1 and SE have different charging circuits to this one. So since the iPhone 11 and iPhone 8 share the same battery connector as the SE2 I checked their schematics to find similar components to fix the issue which was a cracked resistor that pulls voltage up from PP1V8_S2 through the resistor onto the clock line. First ever time at doing this repair and now the battery reads fine 😅

• 
  @iBoardRepairАй бұрын

  great job! Are you using zxw or which board view software? ZXW has the se2 but maybe you need to update or redownload. Either way, that is great detective work to get around not have schematics/boardview

• 
  @Bvetube101Ай бұрын

  @@iBoardRepair I used REFOX for the moment. I had zxw before but no idea how to renew the software so it expired 😢 I would like to get it again though. Literally the resistor looked perfectly fine until a light poke with the x-acto saw it disintegrate into pieces. I currently have my brother's iphone 11 which I have shelved for the moment after a drop caused pads to be ripped under NAND and the pads on the sandwich. Both were restored however I still get a bootloop where the current goes up to .276 hangs then loops. Everything else seems fine and I've already rules parts out as there no difference. When restoring the phone comes out of DFU but fails to go into Recovery mode and goes back to bootlooping I'm just waiting on the programmer to try read the sysconfig file of the NAND. Other than all that, I look forward to more videos, very cool to watch 🙌

• 
  @somewhere2023Ай бұрын

  New chair , finally !

• 
  @iBoardRepairАй бұрын

  🤣Yes

• 
  @user-sm9ht7sm3iАй бұрын

  How much ari and tem

• 
  @LecodeHeverestofficielАй бұрын

  Thanks for good jobs

• 
  @iBoardRepairАй бұрын

  You are welcome

• 
  @bslohАй бұрын

  Thanks for sharing & keep the ball roll...👍

• 
  @iBoardRepairАй бұрын

  You are welcome

• 
  @prettycool31Ай бұрын

  sei sempre il migliore

• 
  @iBoardRepairАй бұрын

  Thanks for watching!

• 
  @LightningRepairsАй бұрын

  Great video, really interesting stuff in this one!

• 
  @iBoardRepairАй бұрын

  Glad you like it!