Пікірлер

• 
  @kalebquinn274113 сағат бұрын

  tcm very comparable to the very expensive 5.7

• 
  @Bigen-1118 сағат бұрын

  Hawt Gun on Gun Action!!!!

• 
  @atrialfib29Күн бұрын

  a glock azz fanboy

• 
  @workthetriggerКүн бұрын

  Nope, Caniks are just over-hyped

• 
  @LazyNinja662 күн бұрын

  I know I'm 6 years late to the party lol, but thank you for such a comprehensive guide to this installation. Now I know what a crush washer is and why it's there, and how to properly align the muzzle brake. Thank you!

• 
  @r3d3y3z3 күн бұрын

  Frog lube?

• 
  @hometheateraddict95834 күн бұрын

  Great reviews ive bought a ton of gear based off your reviews. So did you run with these for a while. I have a cz ts2 and been going back and fourth between the brass and aluminum. Was the perceived reduce in recoil worth the extra weight i know the ts2 sits at 48oz unloaded

• 
  @andresgonzalez19345 күн бұрын

  😮

• 
  @moonwalker_8186 күн бұрын

  I just purchased my first firearm here in California I was stuck between the G19 or the hellcat pro the nice lady at turners swore the hellcat pro is way better than the G19 and that they’re selling more hellcat pros than G19’s so I went with the hellcat pro I hope I made the right choice .

• 
  @ricardomiles68269 күн бұрын

  Saying the G19 has more than a Canik is wild asf.

• 
  @Lily-oz2dq9 күн бұрын

  Basically less blank space on each side of front sight the longer it will take to the acquisition your target. This is ultimately providing a more precise shoot at the cost of sight acquisition timing. Personal preference of combat and target sights. I run target and combat on different weapons. Good review main point is what is more important shot placement or time it takes to shoot.

• 
  @tpr29910 күн бұрын

  I have TFX Pros on two guns. A Glock 27, and a PSA Dagger compact. The rear sight on my Dagger fell off the gun when I removed the set screw to adjust them for windage. I don’t know if they came from Tru-Glo that loose, or the gunsmith ground them down. If he did he ground them in the dovetail, and not on the base. The base finish is intact. Anybody have TFX Pros that were loose from the factory?

• 
  @EricQuinn11 күн бұрын

  I own the hellcat...and the reason you're not locking to the rear is that you're putting too much pressure on the slide release. My Hellcat shoots, it is a tack driver out to 25 yards. It is also my EDC. I can't help but love to shoot my Hellcat.

• 
  @castillo18411 күн бұрын

  Most comparisons to Taurus guns, the other gun always wins, so why even bring out the Taurus?

• 
  @workthetrigger11 күн бұрын

  Because people are always trying to justify a cheaper version of something, or different, non leading guns in a segment. If they're going to get answers, someone has to do the answering

• 
  @castillo18411 күн бұрын

  @@workthetrigger the answer always seems to be Taurus guns are not good, they should just do a video of why not to buy a Taurus and forget comparing it to anything other than a sling shot

• 
  @workthetrigger11 күн бұрын

  @castillo184 except some are. They are decent guns, the g3 and g3c especially. The g4x happens to have an issue, and it doesn't shoot as nice. But people will rarely listen to blanket statements, and often times blanket statements are incorrect anyway.

• 
  @castillo18411 күн бұрын

  @@workthetrigger it's just a personal choice

• 
  @wiseal906313 күн бұрын

  I was just watching "The Lincoln Lawyer" after Matt gets shot in the end by the woman the camera pans over slowly and shows a 6" woodsman with pearl grips ....who ever thought of this was for sure a "gun guy "

• 
  @Mike-cu6gk13 күн бұрын

  Thanks for the video. I went a less expensive route by installing the Apex connector and some polishing on the trigger bar I’m sure it’s not as good as the complete Apex assembly but it’s not bad I did notice a difference.

• 
  @thatsrich94413 күн бұрын

  The CZ has to be one of the ugliest guns ever and for that reason, I'm out.

• 
  @JayA-hc3uu14 күн бұрын

  From what i'm seeing the hellcat is the best on the market right now

• 
  @nathanjames32914 күн бұрын

  It's 2024 and i would LOVE to buy an EAA Witness for $250.

• 
  @goobasippay93815 күн бұрын

  Its not really much bigger than a g17

• 
  @wolverinegnr15 күн бұрын

  I’ve been using Ballistol for years with good results

• 
  @IsaiahAPerez16 күн бұрын

  Extra spring came out on my end

• 
  @JasonHurricane16 күн бұрын

  would it be possible to use a alice belt for ipsc or no i dont know the rules

• 
  @Alberto-tx8vo17 күн бұрын

  I love my Hellcat pro!

• 
  @halfluckhalffate57118 күн бұрын

  Trigger reset?

• 
  @fsufan18 күн бұрын

  Why did sig make it a pain in the ass to add a optic. Glock mos is better

• 
  @NOORYOUNIS18 күн бұрын

  I know its not the point of the review but @ 11:05 you can actually hear the difference between super and subsonic. Id be interest in what the difference in decibles is. I cant imagine its much

• 
  @kentd25318 күн бұрын

  2 yrs later and i bought the P10C with the holosun scs alreay mounted with 3 15 rd mags for 637. Shot my first 200 rds yesterday like butter. Ill shoot another 450 tomorrow. If it goes like i think ill be catching a 4th of july sale for a holster 👌🏾

• 
  @denkdry15 сағат бұрын

  Curious where you found an SCS?

• 
  @curtisbottoms331619 күн бұрын

  I like the taurus g3x and canik mc9 or tp9sc. Interestingly if you dry fire the Taurus a lot you get a clean breaking 3.5 lb trigger. Canik is generally more reliable but both fix any issues you have. Shoot what you're good at shooting and ignore most other comments.

• 
  @thomaseynon620519 күн бұрын

  It’s really funny. I have a collection of over 40 handguns, ranging from striker fire, DASA, 1911’s and Revolvers. The prices vary from $350, on up to $2,000. Out of all of them, the M&P 2.0 is the flattest, best shooter I have had the pleaser to shoot/own. I do live in California, so there may be many I haven’t tried. But for what we can purchase on the current roster, the M&P 2.0 is by the best bang for the buck. In all fairness, the gen 5 Glock is not allowed for purchase here. So my Glock experience is limited to owning the Gen 3.

• 
  @8626John19 күн бұрын

  Nicely explained. Too many "short" videos are anything but. I just needed a refresher as it has been awhile since I cleaned my Rock Island 1911.

• 
  @SG-hh9lu20 күн бұрын

  You clowns make me laugh.....I have been using Hoppe's Products for over 50 years and my guns not only look great but also operate great...............

• 
  @jiheem200620 күн бұрын

  GBguns was able to get the extra 50fps

• 
  @workthetrigger20 күн бұрын

  I've run three different walther's and have seen no increase. In the meantime I've run multiple Springfield Hellcat and see the increase across the board. Unless they've changed something, I don't trust it.

• 
  @jiheem200620 күн бұрын

  @workthetrigger thank for the response, I check it out.

• 
  @Ynot-orious21 күн бұрын

  Great review and video man love to see it.

• 
  @oscarpalacios200821 күн бұрын

  Good video

• 
  @zenryder195921 күн бұрын

  Thank you! Very well done!

• 
  @DanielJohnson-ot8wj22 күн бұрын

  Optics are overrated. Yea I said it. In my opinion they are fun on a range gun, but a liability on a carry gun. I’ll stick with my irons on my EDC. I’ve been shooting guns for over 40 years and retired military/leo so my philosophy isn’t for everyone. Just my 2 cents.

• 
  @larryhavicus610822 күн бұрын

  😅I do not like glocks,

• 
  @BigHammerz22 күн бұрын

  All of the rust prevention test i see use the old rem oil rather than the new and improved Rem oil without the teflon and the new Rem oil is thicker and does not fade away or evaporate on the firearm or knife.

• 
  @daleweller519323 күн бұрын

  I have a PO p13 and it does everything that I need it to do .

• 
  @toynazi23 күн бұрын

  !5 rounders now available and optics ready. Good little pistol.

• 
  @dannypol338425 күн бұрын

  S&W shield plus seems more better for pocket carry too other than any ccw pistol. Great review video.

• 
  @Trad616626 күн бұрын

  You can change out your hammer and internals in USPSA

• 
  @workthetrigger26 күн бұрын

  Production class had different rules 6 years ago when this video came out. Their hammer did not adhere to them (I don't remember if it was shape, sear profile or what) but that has since changed

• 
  @allenbolen970526 күн бұрын

  Love my g3c! I went with the Hellcat for micro carry. To many negative reviews on KZread!Factory recall for not being drop safe. I didn’t even look at the gx4. I chose the Hellcat over p365.

• 
  @victorgalvez92727 күн бұрын

  how do you align the hand guard rail with the upper???

• 
  @workthetrigger27 күн бұрын

  the upper and rail only need aligned on the initial assembly to put the Dolos barrel nut on. When doing that, i'll typically use something like a half in riser, they're typically about 6" long, and span between the upper and rail. the more clamping locations the better. that'll line everything up for the initial assembly. After that, when you pu tthe fore-end back on, everything will line up. you just crank until it's lined up. since it ratchets shut, you'll see when the rail lines up, and it should stop at that point. if it doesn't, you didn't assemble it right.

• 
  @victorgalvez92722 күн бұрын

  @@workthetrigger thanks a lot!!!!

• 
  @BobbyFett399428 күн бұрын

  Glock made one mistake with the 43X. They should’ve designed it to accommodate a fifteen round magazine like Springfield did for the Hellcat Pro model. Glock needs to correct this and make this option available.

• 
  @workthetrigger28 күн бұрын

  They're relying on their aftermarket to fill the gap.

• 
  @danielswartz681829 күн бұрын

  I fired a Glock 19 and an Sig 2022, without any doubt the Glock had way less recoil with far less muzzle rise.

• 
  @EverEasy8329 күн бұрын

  I own both the 19X and Canik mete SFT there's no way the Glock is better. Nice try though.

• 
  @workthetrigger29 күн бұрын

  The only think Canik has over the Glock is trigger... And that matters very little in the grand scheme.

• 
  @EverEasy839 күн бұрын

  @workthetrigger My personal experience is that a good trigger and trigger control is fundamental for accuracy. I'm not a fan of any specific firearm brands. I just know that for me the stock canik sft I own runs better than the glock 19x I own even with the upgraded trigger and sights.

• 
  @user-mm4je1sb9b29 күн бұрын

  CZCustom says the rear sight is 12.2mm. Is this correct?

• 
  @daveshadenuff187Ай бұрын

  Thanx for this video,it was very helpful,and not something I have seen with all the million videos it seems like I have watched on KZread since becoming semi new to shooting.

• 
  @daveshadenuff187Ай бұрын

  I have a M&P 2.0 4.25inch barrel 9mm with a HoloSun 507c X2 on it,and just a Shield Plus 9mm with stock sights.I really like both of them,and would recommend either one to anyone.I recently got to finally shoot a Cz P-07,and man you aren’t lying with how accurate there guns are.I mean I’m pretty accurate with my M&P’s,but that Cz had a great stock trigger,and overall feel,it shot great with it,and I see all the hype about it?and even Smith & Wesson with the ones I own.I do see a Cz in my near future of some kind.Both Smith & Wesson,and Cz make good guns.