Пікірлер

• 
  @hughpickrel5697 күн бұрын

  I LOVE YOUR PROJECTS!!

• 
  @lean-tocustoms79107 күн бұрын

  Thank you

• 
  @royezell366613 күн бұрын

  It's Amazing !!!! you caught a fish... lol

• 
  @BlancoLobo13 күн бұрын

  Been waiting for more videos of running in the river. Here it is.

• 
  @aaronbenson395814 күн бұрын

  This video gets me so hyped up to build a jet jon

• 
  @lean-tocustoms791014 күн бұрын

  Do it, they're a lot of fun.

• 
  @chopperhehehe18 күн бұрын

  Nice result 😊 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿😁✌️

• 
  @chopperhehehe18 күн бұрын

  Love the colours 😊 Boat is looking good 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿😁✌️

• 
  @mattfanning175123 күн бұрын

  How fast is your Bimini rated for

• 
  @lean-tocustoms791022 күн бұрын

  35mph

• 
  @BrianChappie23 күн бұрын

  All of the G-body 4-doors and wagons had fixed rear windows. This car has a '79 grill, are you sure it's a '78?

• 
  @TSRGarageАй бұрын

  First 🖥 🎉.... Trim tabs👍 It will be good to see your experiments with the trim tabs and porpoising.

• 
  @ggmmccc11997799Ай бұрын

  What do you prefer? LT1 or 350 vortic?

• 
  @lean-tocustoms7910Ай бұрын

  I prefer the LT1, if you are leaving the engine stock the LT1 makes more power and gets very good fuel economy.

• 
  @ggmmccc11997799Ай бұрын

  @@lean-tocustoms7910in LT1@@lean-tocustoms7910

• 
  @pastureviewprojects7718Ай бұрын

  I just sent the same one back because it looked so ridiculous

• 
  @TheDeerhuntingboy101Ай бұрын

  😂😂

• 
  @paulmarshall30992 ай бұрын

  Looks Killer !!

• 
  @das-vt9jz2 ай бұрын

  sounds amazing

• 
  @kliether332 ай бұрын

  My grandpa and I used to catch trout at lake Tannycomo when I was a child. Good to see it again!

• 
  @hughpickrel5692 ай бұрын

  Hombre, I laugh because I can see EVERY one of your "catastrophes" happening to me! Hats off to you for daring to take on a unique project. LOVE IT!!

• 
  @paulmarshall30992 ай бұрын

  Wonder why only 18 mph ?

• 
  @lean-tocustoms79102 ай бұрын

  It was trimmed up to high and porpoising really bad.

• 
  @paulmarshall30992 ай бұрын

  @@lean-tocustoms7910 Gotcha, my airboat does that cause the botton 4ft from the transom isnt level

• 
  @paulmarshall30992 ай бұрын

  Your build is quite inspireing

• 
  @lean-tocustoms79102 ай бұрын

  @@paulmarshall3099 thank you

• 
  @BlancoLobo2 ай бұрын

  At least your driveshaft stayed in.

• 
  @gagecogar45392 ай бұрын

  I'm doing this swap right now did the gto shifter fit right?

• 
  @lean-tocustoms79102 ай бұрын

  It didn't really fit that well, I ended up with a Hurst pro billet shifter and I cut the seat to make it fit.

• 
  @gagecogar45392 ай бұрын

  That's where I'm at with it I'm doing it in a 79 malibu and wanted to leave the bench seat I was gonna cut and angle my shifter how your did yours I just figured I'd check to see if you found a way or if fabbing is the best option. Love the vieos BTW thanks to you I found sickspeed Monte haha

• 
  @gagecogar45392 ай бұрын

  Did you use the part that you made along with the pro billet shifter or did you buy the whole kit I'm sorry for the questions I'm just tryna find other people that have done this I'm debating on cutting mine or ordering the complete shifter

• 
  @lean-tocustoms79102 ай бұрын

  @@gagecogar4539 I bought the whole kit. It was kinda pricey but was well worth it. It shifts really nice.

• 
  @gagecogar45392 ай бұрын

  @lean-tocustoms7910 if it's the one for around $400 bucks after seeing your videos if it shifts good for you I'm gonna go ahead and order it now I really appreciate your help and your videos it helped me a lot man

• 
  @collinthesaxon2 ай бұрын

  Sick truck

• 
  @anthonygalipo98752 ай бұрын

  I know this is a old video but the bearing is about 28 dollars did my daughter car took me about a hr it helps putting the bearing in the freezer go ft in just little tapping

• 
  @justinherdman873 ай бұрын

  what epoxy/resin sealants did you use?

• 
  @lean-tocustoms79103 ай бұрын

  I used 3m 5200

• 
  @knowsbetter13 ай бұрын

  We don't need no stinking pilot holes. Lol

• 
  @BlancoLobo3 ай бұрын

  You make that interior upholstery work look easy, also hilarious pointer finger

• 
  @lean-tocustoms79103 ай бұрын

  Thanks, I'm glad you noticed the finger.

• 
  @zachhutchins62703 ай бұрын

  Looks great man! Just watched the rest of the videos from this build earlier to get some ideas for my own boat.

• 
  @lean-tocustoms79103 ай бұрын

  Thanks

• 
  @mattfanning17513 ай бұрын

  Looking good man!

• 
  @colinbourque10973 ай бұрын

  What’s the weight capacity on that boat? I’m building one very similar

• 
  @lean-tocustoms79103 ай бұрын

  Not sure exactly. Hopefully less than it weighs lol.

• 
  @TSRGarage3 ай бұрын

  Now, that is a fishing boat. Rod holders, cup holders, cooler, and shallow water drive system👍

• 
  @lean-tocustoms79103 ай бұрын

  Thanks, I'm pretty happy with how it's turning out.

• 
  @Waddacus4 ай бұрын

  "0-60 in 2.2" ahould be the clickbait title for a youtube short

• 
  @jayadams274 ай бұрын

  I have a 95 firebird lt1 t56 im just over here day dreaming of how much fun they could be in an el Camino let me KZread they. I bet someone’s done it and here we are! My man!

• 
  @knowsbetter14 ай бұрын

  Switch to an automatic More consistent.

• 
  @lean-tocustoms79104 ай бұрын

  Not as fun though.

• 
  @knowsbetter14 ай бұрын

  Is it the first time racing the elky?

• 
  @lean-tocustoms79104 ай бұрын

  Yes, was just curious what it would do.

• 
  @user-sb3ts2sr8r5 ай бұрын

  Bro can you help me out with the switch connection I'm working on my Jet boat project but got confused how can I get Start the engine

• 
  @DakotaB905 ай бұрын

  So fast!!

• 
  @royezell36665 ай бұрын

  you wimp!!! I could have squeezed it with 2 fingers..... whats the weight limit on that boat, looks like 1000 lbs of wood , metal , and motor.

• 
  @lean-tocustoms79105 ай бұрын

  Next time I'll try to get my super manly uncle to show me how it's done.

• 
  @royezell36665 ай бұрын

  That's what I'm talkin about. @@lean-tocustoms7910

• 
  @DakotaB905 ай бұрын

  Love the jet jon content!!

• 
  @anthonykontos79316 ай бұрын

  Looking great man can’t wait to build myself one too

• 
  @lean-tocustoms79106 ай бұрын

  They are a lot of fun

• 
  @anthonykontos79316 ай бұрын

  @@lean-tocustoms7910 hard part is finding a good boat and motor

• 
  @sraschick08126 ай бұрын

  How much would this type of project cost for a shop or fab guy to do? To put in the frame rails and rear frame?

• 
  @levitrimble73746 ай бұрын

  Just curious how you titled your boat in Missouri? I’m building one now in Missouri myself

• 
  @lean-tocustoms79106 ай бұрын

  It's just titled as the original boat, I haven't had any trouble so far. (Knocks on wood)

• 
  @levitrimble73746 ай бұрын

  @@lean-tocustoms7910 gotcha I bought a 12’ from Kansas and just have a bill of sale so my fingers are crossed

• 
  @muffs55mercury616 ай бұрын

  Some people sure know how to destroy fine vintage automobiles. So sad what modernism does.

• 
  @lean-tocustoms79106 ай бұрын

  You'd have to talk to the guy that grenaded the original straight 8 engine about that.

• 
  @AlbertoHeNa77346 ай бұрын

  Thanks for the video I will try lift to remove the screw from a 2015 model

• 
  @Waddacus7 ай бұрын

  Its really coming together

• 
  @lean-tocustoms79107 ай бұрын

  I thought you might say that.

• 
  @joegardner78587 ай бұрын

  Looking good!!!!! I start on wiring this week with mine

• 
  @duaneafields7 ай бұрын

  thanks. put the video on - .25 playback from 6:30 to 7:30, great fun.

• 
  @hillbillyjimcatfishing25757 ай бұрын

  coming along great bro cant wait to see the finished product

• 
  @knowsbetter17 ай бұрын

  What is the brand of aluminum welder is that?

• 
  @lean-tocustoms79107 ай бұрын

  It's a Vulcan multi-process from harbor freight with their spool gun

• 
  @adyjames82048 ай бұрын

  Hope them ramps didn’t scar the rockers.

• 
  @lean-tocustoms79108 ай бұрын

  They didn't hurt the rockers, the frame is the same level or a little lower, so it took the hit. Lol

• 
  @adyjames82048 ай бұрын

  Been waiting on this. Any plans on re installing the turbos?

• 
  @lean-tocustoms79108 ай бұрын

  He has been going back and forth about putting them back on, as of now he just wants to drive it.

• 
  @adyjames82048 ай бұрын

  Where did the turbo setup go?

• 
  @Hangar6058 ай бұрын

  Hell yeah brother

• 
  @aired-downdisconnected41258 ай бұрын

  I should have done this instead of the v6 swap. That was a nightmare.

• 
  @lean-tocustoms79108 ай бұрын

  The V8 fits the same as a V6 (assuming you mean 90 degree V6) just a tighter fit between the radiator and water pump