Hi i edit dng in lightroom for some tweaks then export it and then add these to da vinci resolve but then the dng do not retain the new edited information just looks like stock why?..can this be fixed?
@babajaiy8246Күн бұрын
You have to export in a different format other than dng - jpg, png or tiff for example. I was just on the Davinci forums and some of the people were basically saying Davinci can't 'see' the edits the Lightroom does. However, by exporting in a different format, Lightroom is basically 'baking' in those edits into the file format chosen - So when importing into Davinci that way, you will see the intended 'edited' image. I was wondering like you, based on another video where the guy was doing all his edits in LightRoom as dng files, but the part I missed, is that he exported as jpg sequences. So I had a big folder of dng exported files I can't use and am retrying an export right now as tiff.
@user-hm7cm6gd9bАй бұрын
I have a question can i use these same steps and components to control my neon rgb 4 pin led strip ?
@yousaf.saleemАй бұрын
what type and model are those leds?
@thsound8618Ай бұрын
Hello Yousaf, thank you so much for sharing such a useful video. I wanted to ask you, do you think I can use this same set up to dim the light if needed and do you know if that will be flicker free when taking a video of it with a mobile phone for example? Thank you once again!
@yousaf.saleemАй бұрын
Yes, absolutely, you can use this to dim the lights. Flickering depends on the frequency.
@thsound8618Ай бұрын
@@yousaf.saleem thank you Yousaf! This is the thing, do you have any idea how I can adjust that frequency? I think it is fixed depending on the board you are using. I am using ESP32 and it seems there it is quite high so hopefully it will be ok. Any thoughts on this? 😊 My mofset is coming today, lets see 😁😁
@yousaf.saleemАй бұрын
It depends on effect I think. Which. An be choosen from wled.
@anhellehna6858Ай бұрын
@@thsound8618 Hey bro!! Did you try your ESP32 with mosfet for dimming your light? What type of light do you mean actually? LED or incondescent buld? Does your setup with ESP32+Mosfet dim your light from 100% to 0%? Does it flicker on camera? If yes, at wich shutter speed does flickering start? Noticable just by eye? Which mosfet module do you use? I would be very happy for your quick response. Thanks in advance!!
@thsound8618Ай бұрын
@@anhellehna6858 Hey man, I am sorry I was traveling. I am trying to figure out yet. I am trying with an LED light. Have you figured anything? What is your project like? Thanks
@sukantamondal31102 ай бұрын
What is the fan name ? Where to buy
@yousaf.saleem2 ай бұрын
It is simple 12V fan... I have also made a video on how to construct this device for Aquarium fan + stands. Check my aquarium fan build video.
@huhuhu9643210 күн бұрын
@@yousaf.saleem
@kumarkumar-vb2yl2 ай бұрын
I tried this but when i put a negativ number in the sunset option i get the following error: Message malformed: Time period should be positive for dictionary value @ data['action'][0]['choose'][0]['conditions'][0]['for'] do you know why this is?
@yousaf.saleem2 ай бұрын
Issue found, you have to use offset in the sunset trigger and the "should b in format 'HH:MM', 'HH:MM:SS' or 'HH:MM:SS.F" like in following example. alias: Sun example description: "" trigger: - platform: sun event: sunset offset: "-00:10" condition: [] action: - service: light.turn_off metadata: {} data: {} target: entity_id: light.test mode: single
@ScottPlude2 ай бұрын
If you can't use your own voice, stop making videos and choose a different career.
@srvking2 ай бұрын
Good stuff, i just followed it for Nest doorbell and it works as expected. Thanks a lot. But now, how do we automate the cleanup? Lets say i want to auto delete all the videos that are older than 30 days?
@yousaf.saleem2 ай бұрын
you could create an automation for that. community.home-assistant.io/t/automatically-delete-old-camera-snapshots/215267/7?u=yousaf465
@ok_roman3 ай бұрын
what a garbage, not even pronouncing "davinci resolve" correctly
@Frans3203 ай бұрын
Thanks a lot! A good way to can use the S2 mini with ESPhome
@yousaf.saleem3 ай бұрын
same method can be used for tasmota, wled or any other firmware for the esp32 s2 mini.
@AfterLife_Ventures4 ай бұрын
Water will evaporate like anything
@yousaf.saleem4 ай бұрын
That is why fans are added to lower the temperature using evaporation and maintain it at a comfortable range for the fish.
@TheKd4lyfe4 ай бұрын
why did i take so long to figure this out....
@yousaf.saleem4 ай бұрын
It took me sometimes also to release it was this simple.
@aaronallen77895 ай бұрын
Hello. Thanks for this? I've downloaded CirKit designer. How do I find the mosfet module in your video within the CirKit software? Thanks.
@yousaf.saleem5 ай бұрын
it was a custom upload. You can check cloud components for it or you can create it as a custom component using its picture.
@johnmolton15575 ай бұрын
Can this approach be used to create a light with more than one type of non addressable led strips (say, different shades of white like daylight, warm white and ice blue) to create a tunable white led? Can it be done with one power supply for all the leds, or will it need different power supply channels for each individual color strip?
@yousaf.saleem5 ай бұрын
Yes it can be done, using separate mosfests and separate gpio pins. choose differents leds as separate segments in wled.
@danaress16 ай бұрын
j'ai exactement le même problème
@yousaf.saleem6 ай бұрын
try using adafruit flashing tooll
@yousaf.saleem5 ай бұрын
kzread.info/dash/bejne/Ynaouo9wgJOzZqQ.html this is how to video for flashing esp S2 using adafruit tool.
@ethzero6 ай бұрын
You want to *really careful* about the wire thickness or "gauge" you use when delivering power over 1A with a thin Dupont jumper wire as those will get hot/melt.
@yousaf.saleem6 ай бұрын
for the 12V side, you need thicker wires rated for the current required wired.
@Klotbert6 ай бұрын
straight forward. perfect.
@yousaf.saleem6 ай бұрын
Good it worked for you.
@dennisyildirim27087 ай бұрын
it is boot cycling or resetting again and again. Any chance that you are not pressing : Boot [Button Down and Hold] , Reset [Button Down and Release], Boot [ Button Release] ? This should put it into boot mode. On my case this worked but who knows :D
@yousaf.saleem7 ай бұрын
it was easily flashed via adafruit webserial esptool adafruit.github.io/Adafruit_WebSerial_ESPTool/
@yousaf.saleem5 ай бұрын
kzread.info/dash/bejne/Ynaouo9wgJOzZqQ.html this is how I fixed it kzread.info/dash/bejne/Ynaouo9wgJOzZqQ.html
@hotforex44359 ай бұрын
am using diffrent company and diffrent model wifi router how i know wich firmware i will down load for my router ??
@yousaf.saleem9 ай бұрын
which router model you have?
@hotforex44358 ай бұрын
@@yousaf.saleem HG8245W5 HG8245WQ
@tutuzim1 Жыл бұрын
Could you shlw the wiring? I wish to see it.
@yousaf.saleem6 ай бұрын
kzread.info/dash/bejne/qIamqaOOqbmWc9o.html Circuit diagram for this
@theimpulse77 Жыл бұрын
I have this all setup, but my user interface shows a ton of effects for addressable LEDs. Do you know any way to change that? Thanks!
@yousaf.saleem Жыл бұрын
most of those will work with non-addressable LEDs too. Just create a preset for the effect you might require.
@NickMirro Жыл бұрын
Is this AI created? Pretty useless
@yousaf.saleem Жыл бұрын
This was before AI was even a thing. Just a demo of RAW video on android using open-source software.
@himanshuchandrakar1995 Жыл бұрын
Hello iska valve kha se milega
@yousaf.saleem Жыл бұрын
In India flipkart ?
@lanlonglian Жыл бұрын
cpu frequency set to 1400mzh is dangerous ,suggest 1200mzh
@yousaf.saleem Жыл бұрын
Factory default, with 2x fans
@akhtarnadeem621 Жыл бұрын
What SDD drive did you use for 4k 12bit raw?
@yousaf.saleem Жыл бұрын
Samsung 980
@akhtarnadeem621 Жыл бұрын
@@yousaf.saleem Thank you!!
@yousaf.saleem Жыл бұрын
@@akhtarnadeem621 it was just a small video. Davinci resolve itself is very capable of handling such video even on not so powerful hardware
@Ranger7Studios Жыл бұрын
When I add multipart clips, they audio is not working on several of the clips. Only one of the clips. Is there a way to make all the audio work???
@TrapPhoneLoveMelodiesss Жыл бұрын
Clutch! Thank you sir
@yousaf.saleem Жыл бұрын
Where you able to import the Raw images as a video? As instructed in the video.
@helengallagher7886 Жыл бұрын
💦 [̲̅p][̲̅r][̲̅o][̲̅m][̲̅o][̲̅s][̲̅m]
@Uriell0 Жыл бұрын
i need old theme version
@yousaf.saleem Жыл бұрын
Check 1:30 I have shown it there. That one is called luci-theme-openwrt
@syamreafill6647 Жыл бұрын
Link frimwart nya sur
@yousaf.saleem Жыл бұрын
You can download the firmware from firmware selector tool. firmware-selector.openwrt.org/
@mjconfidential2 жыл бұрын
Good video, no pointless talking and taking forever. Thank you.
@chumcool2 жыл бұрын
Yeah, that's exactly what is not happening. I open the folder and it loads all DNG files as individual images.
@yousaf.saleem2 жыл бұрын
Which version of DR you are using?
@komekko3732 жыл бұрын
@@yousaf.saleem 18 beta
@BlackPartyFilms2 жыл бұрын
@@yousaf.saleem at least you can get the folder to open, Resolve crashes as soon as I click the folder. I tried dragging it in and it crashed before I lifted my finger from the mouse... I soo glad I didn't pay for that goofy app
@yousaf.saleem2 жыл бұрын
@@BlackPartyFilmsstrange. Which version of DR you are using? I would suggest Uninstalling it using Revo Uninstaller and deleting all registry keys using reviunistaller. Restart and install a stable version of DR.
@BlackPartyFilms2 жыл бұрын
@@yousaf.saleem I've just installed 16.2.8 we'll see how it goes
@2ndishmum4232 жыл бұрын
Can you show the wiring
@yousaf.saleem2 жыл бұрын
Wiring is simple DC TO DC. ESP32(in this case) is being powered by 5V Usb power supply/mobile adapter. Light is being powered by 12V 5A power supply, with MOSFET PWM unit connected between 12V power supply and light. GND on MOSFET is connected to GND pin on esp32 and VCC/Driver is connected to D19 pin on Esp32. Hope this help. I will create a new video to explain the wiring in detail.
@Marcuss925 Жыл бұрын
@@yousaf.saleem Please post the diagram somewhere.
@abesadem7 ай бұрын
We are still waiting for the video,regards@@yousaf.saleem
@yousaf.saleem7 ай бұрын
@@abesadem Will try my best to edit and upload this week.
@yousaf.saleem6 ай бұрын
kzread.info/dash/bejne/qIamqaOOqbmWc9o.html on popular demand, I explain the circuit diagram in this video.
Пікірлер
Hi i edit dng in lightroom for some tweaks then export it and then add these to da vinci resolve but then the dng do not retain the new edited information just looks like stock why?..can this be fixed?
You have to export in a different format other than dng - jpg, png or tiff for example. I was just on the Davinci forums and some of the people were basically saying Davinci can't 'see' the edits the Lightroom does. However, by exporting in a different format, Lightroom is basically 'baking' in those edits into the file format chosen - So when importing into Davinci that way, you will see the intended 'edited' image. I was wondering like you, based on another video where the guy was doing all his edits in LightRoom as dng files, but the part I missed, is that he exported as jpg sequences. So I had a big folder of dng exported files I can't use and am retrying an export right now as tiff.
I have a question can i use these same steps and components to control my neon rgb 4 pin led strip ?
what type and model are those leds?
Hello Yousaf, thank you so much for sharing such a useful video. I wanted to ask you, do you think I can use this same set up to dim the light if needed and do you know if that will be flicker free when taking a video of it with a mobile phone for example? Thank you once again!
Yes, absolutely, you can use this to dim the lights. Flickering depends on the frequency.
@@yousaf.saleem thank you Yousaf! This is the thing, do you have any idea how I can adjust that frequency? I think it is fixed depending on the board you are using. I am using ESP32 and it seems there it is quite high so hopefully it will be ok. Any thoughts on this? 😊 My mofset is coming today, lets see 😁😁
It depends on effect I think. Which. An be choosen from wled.
@@thsound8618 Hey bro!! Did you try your ESP32 with mosfet for dimming your light? What type of light do you mean actually? LED or incondescent buld? Does your setup with ESP32+Mosfet dim your light from 100% to 0%? Does it flicker on camera? If yes, at wich shutter speed does flickering start? Noticable just by eye? Which mosfet module do you use? I would be very happy for your quick response. Thanks in advance!!
@@anhellehna6858 Hey man, I am sorry I was traveling. I am trying to figure out yet. I am trying with an LED light. Have you figured anything? What is your project like? Thanks
What is the fan name ? Where to buy
It is simple 12V fan... I have also made a video on how to construct this device for Aquarium fan + stands. Check my aquarium fan build video.
@@yousaf.saleem
I tried this but when i put a negativ number in the sunset option i get the following error: Message malformed: Time period should be positive for dictionary value @ data['action'][0]['choose'][0]['conditions'][0]['for'] do you know why this is?
Issue found, you have to use offset in the sunset trigger and the "should b in format 'HH:MM', 'HH:MM:SS' or 'HH:MM:SS.F" like in following example. alias: Sun example description: "" trigger: - platform: sun event: sunset offset: "-00:10" condition: [] action: - service: light.turn_off metadata: {} data: {} target: entity_id: light.test mode: single
If you can't use your own voice, stop making videos and choose a different career.
Good stuff, i just followed it for Nest doorbell and it works as expected. Thanks a lot. But now, how do we automate the cleanup? Lets say i want to auto delete all the videos that are older than 30 days?
you could create an automation for that. community.home-assistant.io/t/automatically-delete-old-camera-snapshots/215267/7?u=yousaf465
what a garbage, not even pronouncing "davinci resolve" correctly
Thanks a lot! A good way to can use the S2 mini with ESPhome
same method can be used for tasmota, wled or any other firmware for the esp32 s2 mini.
Water will evaporate like anything
That is why fans are added to lower the temperature using evaporation and maintain it at a comfortable range for the fish.
why did i take so long to figure this out....
It took me sometimes also to release it was this simple.
Hello. Thanks for this? I've downloaded CirKit designer. How do I find the mosfet module in your video within the CirKit software? Thanks.
it was a custom upload. You can check cloud components for it or you can create it as a custom component using its picture.
Can this approach be used to create a light with more than one type of non addressable led strips (say, different shades of white like daylight, warm white and ice blue) to create a tunable white led? Can it be done with one power supply for all the leds, or will it need different power supply channels for each individual color strip?
Yes it can be done, using separate mosfests and separate gpio pins. choose differents leds as separate segments in wled.
j'ai exactement le même problème
try using adafruit flashing tooll
kzread.info/dash/bejne/Ynaouo9wgJOzZqQ.html this is how to video for flashing esp S2 using adafruit tool.
You want to *really careful* about the wire thickness or "gauge" you use when delivering power over 1A with a thin Dupont jumper wire as those will get hot/melt.
for the 12V side, you need thicker wires rated for the current required wired.
straight forward. perfect.
Good it worked for you.
it is boot cycling or resetting again and again. Any chance that you are not pressing : Boot [Button Down and Hold] , Reset [Button Down and Release], Boot [ Button Release] ? This should put it into boot mode. On my case this worked but who knows :D
it was easily flashed via adafruit webserial esptool adafruit.github.io/Adafruit_WebSerial_ESPTool/
kzread.info/dash/bejne/Ynaouo9wgJOzZqQ.html this is how I fixed it kzread.info/dash/bejne/Ynaouo9wgJOzZqQ.html
am using diffrent company and diffrent model wifi router how i know wich firmware i will down load for my router ??
which router model you have?
@@yousaf.saleem HG8245W5 HG8245WQ
Could you shlw the wiring? I wish to see it.
kzread.info/dash/bejne/qIamqaOOqbmWc9o.html Circuit diagram for this
I have this all setup, but my user interface shows a ton of effects for addressable LEDs. Do you know any way to change that? Thanks!
most of those will work with non-addressable LEDs too. Just create a preset for the effect you might require.
Is this AI created? Pretty useless
This was before AI was even a thing. Just a demo of RAW video on android using open-source software.
Hello iska valve kha se milega
In India flipkart ?
cpu frequency set to 1400mzh is dangerous ,suggest 1200mzh
Factory default, with 2x fans
What SDD drive did you use for 4k 12bit raw?
Samsung 980
@@yousaf.saleem Thank you!!
@@akhtarnadeem621 it was just a small video. Davinci resolve itself is very capable of handling such video even on not so powerful hardware
When I add multipart clips, they audio is not working on several of the clips. Only one of the clips. Is there a way to make all the audio work???
Clutch! Thank you sir
Where you able to import the Raw images as a video? As instructed in the video.
💦 [̲̅p][̲̅r][̲̅o][̲̅m][̲̅o][̲̅s][̲̅m]
i need old theme version
Check 1:30 I have shown it there. That one is called luci-theme-openwrt
Link frimwart nya sur
You can download the firmware from firmware selector tool. firmware-selector.openwrt.org/
Good video, no pointless talking and taking forever. Thank you.
Yeah, that's exactly what is not happening. I open the folder and it loads all DNG files as individual images.
Which version of DR you are using?
@@yousaf.saleem 18 beta
@@yousaf.saleem at least you can get the folder to open, Resolve crashes as soon as I click the folder. I tried dragging it in and it crashed before I lifted my finger from the mouse... I soo glad I didn't pay for that goofy app
@@BlackPartyFilmsstrange. Which version of DR you are using? I would suggest Uninstalling it using Revo Uninstaller and deleting all registry keys using reviunistaller. Restart and install a stable version of DR.
@@yousaf.saleem I've just installed 16.2.8 we'll see how it goes
Can you show the wiring
Wiring is simple DC TO DC. ESP32(in this case) is being powered by 5V Usb power supply/mobile adapter. Light is being powered by 12V 5A power supply, with MOSFET PWM unit connected between 12V power supply and light. GND on MOSFET is connected to GND pin on esp32 and VCC/Driver is connected to D19 pin on Esp32. Hope this help. I will create a new video to explain the wiring in detail.
@@yousaf.saleem Please post the diagram somewhere.
We are still waiting for the video,regards@@yousaf.saleem
@@abesadem Will try my best to edit and upload this week.
kzread.info/dash/bejne/qIamqaOOqbmWc9o.html on popular demand, I explain the circuit diagram in this video.
Trash guide
Any improvement suggested?
Next time I will make a detailed how-to video