Rev up. Light up. Conquer.
M&R Automotive makes LED light kits for adventure, off-road enthusiasts. We are innovative and fearless in our designs so you can experience the thrill of you fully deserve.
🤣We also make fun videos, to make sure this never feels like "work."
We are here for your! Always a call/text away.
✌️Our goal is to instill confidence in you!! Mike, the owner, is self-taught in CAD file, CNC plasma cutting and a few other tricks up his sleeve. Through his persistence, curiosity and desire to learn something new, we believe you can also discover your potential. We provide instructional videos.
We want you to stand out! We want you to be noticed! Our lights are tested to provide maximum visibility in the toughest environment. Don’t underestimate our discrete designs with how powerful our light kits are.
www.MandRonline.com
instagram.com/MandRautomotive
facebook.com/MRautomotive
**Please note that our product are for offroad use only.
Пікірлер
Great vid! Is this your personal vehicle?
Good job. But I might bite the bullet and spend the extra 200 bucks at the dealership to swap out my Front and Rear Emblems. Don't want to screw up my new 2024 Canyon.
that would look nice
Can this be wired to auxbeam switch panel ?
Yes they can
Thanks, I needed to repair my windshield washer reservoir and this was what I needed
perfect, glad it helped
How many lumens? Can you show us it turned on?
There is an output video on our channel
Actually they look like shit, as they appear to be spot lights not flood lights! These would be a safety hazard if someone from oncoming traffic would be temporarily blinded. Lastly, I would not be surprised if they were not NTSB approved! I am a mechanic and I would also be concerned with Fords canbus system becoming disabled due to overload even if it was run on a relay with an external power source!
The stock reverse lights really only work if you keep it under 35. HUGE design flaw!
Just ordered the dual set. Can wait to install.
looking forward to your install, would love to see your set up, email us your picture. If you need any help with install, reach out personally
@@MandRautomotive what size wire comes with the light bar? 12 aug or 16?
@@tjanusz3 I believe they are 16 gauge on the 30" slim
Will this be similar for a 2019 super duty?
I’m afraid the brackets only work 23+ but I’ll try to test them
@@MandRautomotive can you make a kit for 17-19
@@trentvanzant7868 thanks I’ll look into it
Great light install on the frontier. very helpful. Thank you
I'm happy it helped you, appreciate the comment
Not a Diesel??? Where's your shutters???
Aesome video man! Is there any way to only pruchase the mounting brackets from you?
Unfortunately the brackets only work with our style lightbars
Bummer. Would be awesome to sell those solo so people could use similar 30” light bars.
@@vigorFPS I'd hate to sell just brackets when I personally haven't tested them on other brand light bars. I know our light bars are unique in their depth allowing us to install them in tight spaces, such as between shutters (without touching them) and the grille.
What a efective Pry hand's !! Great video !
How bad is the hood reflection?
Why didn’t you show it at night 🤦♂️
We have night output videos on our chanel
I don’t think I want one of these that bad. 😂
If you ever change your mind, we’ll be here
my lights flicker on and then trip off and i have to reset the feed in the tesla screen
M&R lights? What converter did you go with?
@@MandRautomotive the amazon link. maybe its faulty?
Would like to have a special bracket for the grill shutters that have only 1 10mm bolt on each side. Had to fabricate our own brackets for it.
I have seen a single bolt grilles. I have a bracket for that. What year and trim you have?
Good video thanks!!
Glad you liked it!
Hey M&R. I put in the Reverse lights a week or so ago, and I had some criticism about the thoroughness of the instructions. I installed this light bar today, and these instructions were much clearer, and if weren't making them available for me to watch last month, I probably would not have purchased them. They were really straight forward....BUT it was still lacking in a couple areas. Your video shows removal of the harness with the grill, but 1. does NOT say "how" to disconnect the attachment (which lead to some fear of breaking the clip) and 2. did not mention removing the small hose to the camera washer. That would have helped during my install. Also, you mentioned the 8mm bolts, but did not mention that the attachment brackets required 10mm, nor did you mention needing torx screwdriver for the side brackets. Not "that big" a deal for a person that owns tools, but would be nice in the description to list "here's what's needed"...1, 2, 3, etc. Not being picky but as I mentioned, your pretty good instruction video is what encouraged me to purchase and install on my own Great Job. Next post is a link to my video on FB. Thanks again. Please let me know if you make something custom for the 3 amber marker lights or some top lights for my baja bar. 2 THUMBS UP!
Hi, its Mike here, the owner. Thank you for your detailed review. I will make sure to mention in upcoming install videos the tools the tools that I use. I guess I'm always under the assumption that the people that install it themselves, have some tools laying around. Now that I know that these install videos are giving someone like you more confidence about installing it yourself, which is ultimately what I would like. I appreciate it and thank you for your support. We are also learning what our customers would want from us.
@MandRautomotive the tools not being mentioned is minor. I just thought since you mentioned the 8mm you could mention others. I had more than everything I needed, but I like to lay everything out before I start. Not showing how to disconnect the harness and water hose was more important to me. I've broken so many clips in my life from not knowing the correct way to remove. I LOVED the showing of prying off bottom of grille and removing bumper. Not sure I would have attempted if you hadn't shown. Also liked taping bumper. I used brass connectors to connect covered with heat shrink for a smooth clean look. Did you get to see my pics/video?
Finally, he busted out the nut driver
Just got my light last week. I need to go get a few tools today but looking forward to it. Looks like a great install video and I really appreciate how in depth it was. I’ll let you all know how I make out. Cheers 🍻
awesome! Looking forward to seeing it, would love pictures after. Reach out directly if you need any help with the install.
@@MandRautomotive honestly I did it solo and then my buddy came over to help me when I realized I had to put the light bar on the highest part of the bracket (as in slide it up so it sits flush). Honestly the install was super easy and the product is superb. I may end up getting sold sort of switch panel sooner rather than later. But once again, thanks for the help. Subscribing/ liking man.
Yea I'll stick with unobstructed air flow. All that for a freaking pretty boy light bar. Nope !!!
Could you guys do a demo of the white light on road, or on open terrain? It's kind of hard to see the range/throw of the light in a fenced in area. Thanks!
Great suggestion!
I have a problem with this video. I just took off an upper bumper cover like he shows. Mine was a 2022 Sierra. You cannot get to the tabs from below like he states. To release them, you very carefully have to put a small flat blade between the upper and the lower edge of the grille and push the tabs down to release them. It looks to me as if all of the release tabs on his cover are gone. It seems that GMC has gone above and beyond to make this as difficult as possible.
Agreed
Is really that simple
How does that work with a tow hitch?
I doesnt. We have other back up kits to work with hitch broncos
Built not bought. Good on ya!
Extra parts means you made it better…
Don’t you have to have the front camera recalibrated now that you unplugged it.
No when you plug it back in it functions as intended
Stack the old one on top of the new one with a custom bracket. Depending on where you live, a lot of metal shops will cut them for you. 4 or 5mm, foward sweep bracket should do the trick.
Had to engineer various options to reduce wind noise
Thanks for the video
appreciate it
Headlights must not work
its never enough
Do you have anything similar for the gen3 raptor?
we have behind grille light bars for gen 3 up to year 2023, currently in the process of finding a 2024 raptor for new prototyping
@@MandRautomotive can I get see? I want the bar outside the grill but flush like this one
@@aAlnuaimi91 I gotcha. I was thinking of something similar as well. Hopefully I can get a truck into the shop soon. You're not in LA by any chance?
@@MandRautomotive unfortunately not, I'm in Dubai... I used to have the flushed one for my gen 2, I loved it. Now I have the raptor r and want to put the same led bar. Thanks for the quick replies
@@aAlnuaimi91we have a lot of kits for 2021-2023. Need to remake the brackets for 2024 because grille changed
A LITTLE DISAPPOINTED! I purchased these back up lights and the 40" Pro bar. I received them both today. Both lights were in the boxes and well packaged. The Quality is obviously noticeable. However, the hardware for both light kits were just taped to the boxes in several baggies with No identification on them. I had to sort which bolts went to which kits. Then I threw one of the bags away because it was stuck to the bottom of the shipping package. I installed the back up lights today but put the Pro bar aside for another day. Luckily I checked for the hardware. For this price and quality, the hardware should be all together and inside the respective light kits. As far as the install...again disappointed. I Watched all 4 videos of your Ranger Raptor products. When I go to install the Pro bar, I think it will go GREAT because your instructions are very thorough....NOT so much with the reverse kit. You video just starts with "Here is the bolt...." then you show the bracket already attached. You REALLY should indicate that it is VERY difficult to get these nuts and bolts tightened up because the spare and the driver side harness make it very difficult to reach. Even on the Pass. side once the bracket is on, it's hard to get your ratchet there to tighten. The same thing applies to the tightening up the assembled bracket with the nylon lined nut. The space is very difficult to navigate. ALso, you should leave the wires bare and just include the crimp pieces, so that we can slide an heat shrink tube over the connection. I just removed the and used my own connectors. NOW having said all that I am very please with the product itself and am very happy that you made these lights specifically for the Ranger Raptor. A+ for getting these to the market and having good quality. I cant wait to put the Pro Bar on it. Please let me know if you have some lights for the top of the Baja bar. Would also like some amber 3 lights for the top of the grille.
I appreciate the comment and will definitely address some things to make it better. Email me a photo of the Baja bar I would love to help you source some quality lights. -Mike
@@MandRautomotive Thanks. It may be a week or so, since I want to get a photo of the Pro Light bar as well. What Email should I use? Did you see the link to my back up light install? Thanks again!
How hard would it be to tap the amber into your cars existing DRLs?
It wouldn’t you can get power from the fuse box via fuse tap
90,90…?
angle bend of the bracket
God I would love to be able to move the light bar to the bumper on my 04. The roof mount completely destroys the highway ride quality
Not a huge fan of windshield bars either
Absolute garbage
Hush Child
Pëdofÿl
@@TRANSWOMENAREMEN1776hush dumbas
Agreed
Lol? @@AgentChavo
Better then lambo
where do we buy the auxiliary wiring harness?
It comes factory with the truck. If you don’t have one you need the M&R wireless wiring harnesses
Good job!
Appreciate it
It was factory. I’m thinking some kind of software connection but not 100% sure
I'm guessing you can power it to pop the frunk like the wire behind the bumper on model 3
I have a 2021. Is this a no go for this setup?
Sorry, this won't work for the 2021 model. If i end up getting this year in the shop for prototyping, I'll let you know.
1:31 What is that wire with the loose ring connector?
Great video, fyi, if you are trying to take off the grill of a 5500, there are 7 screws that need to be loosen up underneath prior to removal.
Thank you for letting all of us know. Appreciate it
Can you post a link were to buy them?
Hi. You can buy them at www.MandRonline.com. Thank you
What a fckin great "single-man" email !!! That's next level!
Honestly looks lame as hell
ya it is not a very attractive car
Be grateful