Пікірлер

• 
  @steveb238616 сағат бұрын

  Rather than zip ties, could you used steel wire, like rebar wire? I worry about zip ties, particularly the white (indoor) ones. Appreciate the video!!

• 
  @TheMichaelsvieiraАй бұрын

  Thank you. That was really helpful

• 
  @cathrynmartin4395Ай бұрын

  I checked out another guy's video and it was crap compared to yours - THANK YOU!

• 
  @saml8124Ай бұрын

  Thank you so much for this video. Everything went smoothly thanks to you. The tip about the ziptie was especially helpful.

• 
  @jimmartindale98122 ай бұрын

  Thank you for this!!!

• 
  @meloniedevries84772 ай бұрын

  Awesome detailed video. Very informative. We have the same model and same issue.

• 
  @1aznchris3 ай бұрын

  I have this problem for awhile now. And I'm just looking for a video repair. Finding this was the most easiest by watching how you do it.

• 
  @cgrscott4 ай бұрын

  Your simplicity and brevity makes this video very helpful.

• 
  @divyajnana4 ай бұрын

  Thank you, you little genius take'er apart'er. My glove box lid just popped today, and through the miracle of AI, your video popped right up. Thank you very much.

• 
  @justinhardenbrook70765 ай бұрын

  One side on my 06 Camry is working but the other isn’t. Pump and everything is working fine. Could this likely be a clogged nozzle?

• 
  @hideehideehideehoe5 ай бұрын

  Thanks Dude--from another BriAn Malone!!

• 
  @jeremysettles89236 ай бұрын

  I don't know how you worked that out. I had to take the brown trim, the A/C control remove 4 bolts under the radio and then pull it out 3 inches before taking that glove box out. Couldn't move the radio enough without unbolting the frame.

• 
  @slacker_DIY7 ай бұрын

  Thanks for posting! I was able to take out my glove box and fix the latch that was not locking.

• 
  @elisabethmiddleton43608 ай бұрын

  This was very helpful, I just did mine, following this video. Many thanks!

• 
  @PreacherDan9 ай бұрын

  Here we go. Good video.

• 
  @PFuntom11 ай бұрын

  Thanks for this because some assholes in this one auto shop I went to broke one of my nozzles…

• 
  @khull12404 Жыл бұрын

  Thank you! Excellent tip on the zip tie.

• 
  @ChrisCalnon Жыл бұрын

  Great video! Just used your method to re-spring mine and it works great. I skipped the zip tie part as to not weaken the hinge anymore than it already is but if i have to pull it out again i'll take the extra step. Thanks for the tutorial!

• 
  @Nothandled Жыл бұрын

  Awesome Thanks! Love my van more after shopping cars, I said… I’ll keep my van :)

• 
  @Mary-hj7jy Жыл бұрын

  Great Thank you! I have a compound issue though. The springs are likely out of place on the door lift, but the latch is not working either. Hopefully, once I follow the removal steps you posted, it will just be a spring too. Thanks again for posting this!

• 
  @romeobugallon3551 Жыл бұрын

  Hi Brien mine is not locking in place, seems the spring is ok and the plastic hook doesn't look broken, any idea what the problem. Thanks

• 
  @mikezaloudek4893 Жыл бұрын

  I liked seeing the demo of how it's supposed to pop up with both springs in place. I have a loose spring type sound coming from the glove box area and I think after seeing this it might be the same problem. When I push the button it opens and raises the door, but it's kinda slow and doesnt go all the way up. I bought it used so I just thought that was the way it operated. So you never heard a noise? I kept thinking it was something rattling IN the upper or lower glove box but I was in the passenger seat and kept removing things and kept hearing the rattle.

• 
  @jamestio6172 Жыл бұрын

  Nice

• 
  @markjaquith8359 Жыл бұрын

  Super helpful!’!!!

• 
  @Dormdad09 Жыл бұрын

  Thanks for doing all this and showing where each clip was, great idea with the zip tie!!!! Very well recorded and explained, THANK YOU

• 
  @stevefairchild13652 жыл бұрын

  Thank you!!! Between this video and the radio removal recommendation, taking out the upper glovebox was straightforward. Also, great idea with the tie downs! When setting the spring, I used a short loop of tie wire to pull down the spring which made that part a bit easier. I still needed a second pair of hands to use a screwdriver to set the spring in the hole while I held tension on it. I also used tie wire to hold down the spring with the tie wire being twisted/clipped on the outside edges. That had the benefit of requiring smaller drill holes.

• 
  @stephenbraddy99252 жыл бұрын

  That broken plastic piece was load-bearing. The spring was being retained there, but slipped around to the next thing that would retain it after that plastic piece broke off.

• 
  @simonyee31762 жыл бұрын

  Thanks for the time to post this detail video.

• 
  @BuddhaRice2 жыл бұрын

  Thanks for posting, I found it much easier if you pulled out a few more panels and pulled the radio out further, only takes another 2 minutes and a 10mm socket. You can look up sienna radio removal on youtube. Once the radio was of the way, it came off easily

• 
  @richardjung27352 жыл бұрын

  Great vid, really helped me alot when I was trying to get at my latch to fix it, fixed the springs while I was at it too! Thank you making this vid!

• 
  @richardjung27352 жыл бұрын

  I had a hard time with getting the tabs out from under the radio faceplate. The springs were a @$%#^@$#^@$#% too!

• 
  @marklundegren2 жыл бұрын

  Got it done today...thanks for the video. I found opening the upper glove box door, once removed, made it easier to reseat the spring stays.

• 
  @MichaelChien122 жыл бұрын

  Good tip on using a zip tie. Thanks!

• 
  @HETPEZB2 жыл бұрын

  Those cracked pieces on both sides been cracked because they were the "pivot"? points where the other side of the spring been pushing against. After those pieces broke off - the spring made another 90-or-so degree turn until it reached a sturdy surface again and thus making the spring effect less effective :) I ended up drilling another "pilot" hole for the spring to compensate the lost whatever degrees caused by the broken plastic. I did this repair probably 6 years ago (only one spring popped out of place), but recently the door stopped popping up again, so I suspect the second spring failed :)

• 
  @richardabner94202 жыл бұрын

  great/helpful video!

• 
  @richardabner94202 жыл бұрын

  Is that a silicone wedding ring/band often worn by mechanics, electricians , musicians, etc where a metal one would be not brst choice?

• 
  @saifulrizaldahalan49152 жыл бұрын

  Thanks for the guide. I had the same problem recently. Thanks

• 
  @teamgeorgefitness30322 жыл бұрын

  Excellent video dude. Thank you

• 
  @gokumaster1012 жыл бұрын

  Can you please put a link for the part

• 
  @narendramangru22763 жыл бұрын

  i have the same problem with mine...will have to try your fix...thank you for posting

• 
  @yesicatorres83333 жыл бұрын

  How to fix door lock in 4runner

• 
  @SuperRmarvin3 жыл бұрын

  Brien, I like all the others here really appreciate seeing this. Unfortunately, at 78-year-old, I am not sure I want to tackle it. But, should I decide to try, where would one get that plastic prying tool you used? Is it something I could get at an auto parts store or hardware store? Thanks a million, if you are able to find this comment and provide an answer. I bet the dealer would want to sell me a new glove box and the labor to install it. I bet that would take about one month's social security out of my pocket. UPDATE: I did as suggested in another comment and looked into loosening the radio mounting bolts, in that video the gentleman provides my answer. The prying tool(s) apparently come in a set and are not too expensive. Guess I will rethink tackling my weak spring action. Thank you again for this most informative video.

• 
  @BrienMalone3 жыл бұрын

  Sounds like you got it, but if others are interested I bought this set for $13: www.amazon.com/dp/B01M3SP84D/ref=cm_sw_r_cp_awdb_imm_GQBSV22YG5F34H40X176 There is a $9 version that has fewer tools and no case.

• 
  @jazzys23 жыл бұрын

  Excellent Video, taught me exactly how to dismantle the trim and get the box out, fix the springs with the zip ties and i too got a bloody knuckle from the one spring. Thanks for the great video!!!

• 
  @davidlilleness57953 жыл бұрын

  Wow thank you for this guide! This is a nightmare repair, and without your video and zip tie idea I wouldn't have finished it. Nice work!

• 
  @jeromegiles153 жыл бұрын

  Thanks for taking the time to post this video. This is exactly what I needed to get the job done. Awesome idea about the zip ties. I don't want to do this project again. You weren't kidding about those springs. The hardest part was getting them back in the holes. Now I don't have to worry about them popping out. ✌

• 
  @odiesclips76213 жыл бұрын

  Exactly what I needed to see. Thank you!!

• 
  @petermei14124 жыл бұрын

  which heated gun did you use to drill the two holes

• 
  @BrienMalone3 жыл бұрын

  Peter Mei It was just a dremel with a pilot bit (also called a cutting bit)

• 
  @paulckwok4 жыл бұрын

  Thank you for posting the step by step video. I've been stuck at the radio/vent overlapping the glove box part and couldn't go any farther in the past. Now just got it fix after watching your video!

• 
  @dt1mdlara4 жыл бұрын

  I've had this same problem on my 2011 Sienna since 2014, but Toyota won't repair it. You are definitely smarter than those Toyota Engineers who designed this in California. I'll fix mine soon. Thank you so much for sharing and God bless.

• 
  @georgehong92274 жыл бұрын

  Releasing the panel of the glove box on the left side requires that you loosen the radio bolts so that you would not damage the plastic prior to forcing the radio panel off. Reference "KZread" videos on how to remove radio to see how this is done. Process is easy and only tool require is a 10 mm socket to loosen and remove 2 radio bolts on the right side.

• 
  @kikilemolo3 жыл бұрын

  Thanks for this tip! I found a radio removal video. I was really concerned I would break part of the radio console. I felt much better about just removing it.

• 
  @kikilemolo3 жыл бұрын

  Great video! Very clear instructions. Unfortunately for me, I was just not able to get one of the springs back in place. The left spring is a monster. Maybe if I have an extra pair of hands in the future I’ll try it again.

• 
  @kikilemolo3 жыл бұрын

  CD k it k

• 
  @BluePlayer115 жыл бұрын

  I was the one with the white shirt and blue pants

• 
  @Dimpzz4 жыл бұрын

  No one asked

• 
  @BluePlayer114 жыл бұрын

  Well that was sure nice of you... it was just fun and I enjoyed it and that’s all that matters and your a little late buddy that was a year ago

• 
  @Dimpzz4 жыл бұрын

  Idc