Awesome and simple visual explanation! Thank you so much for your service sire 🫡
@demitriesmccaskill306514 күн бұрын
I just needed the boots. Whelp looks like im gonma be taking the whole calf if it fits on the body i plan on using
@paulmitchell109915 күн бұрын
Good video. You took apart everything except the part I wanted to see. The hip. My figure fell off the balcony of a five story building, and while it landed on bushes, the leg snapped off from the hip. Its not a part that can be disassembled, but it might be possible to build a new pin to connect the upper thigh piece to the hip joint. But if it is possible to get the hip piece from NECA then I will probably be able to make the switch from watching your video. Thanks.
@609collector15 күн бұрын
@@paulmitchell1099 good luck. If not neca I'm sure you can find the part somewhere
@davidponcedeleon111016 күн бұрын
I have a Christopher Reeves with 😂 a M35 body. I'd like to know where to get my superman suit?
@609collector16 күн бұрын
@davidponcedeleon1110 you'll have to find a seller that makes suits. Facebook is where I've found a lot of great customizers. Ebay may have some as well but that's sketchy. Instagram will probably have a lot as well. I got the dark blue on Facebook and it's great. The boots aren't the best but that's my only complaint. The seller makes a lot of stuff even some custom headsculpts.
@jedimastagАй бұрын
sucky cam angle
@609collectorАй бұрын
There are many more videos on the channel
@02kghostvlogs92Ай бұрын
Avengers, Disassemble!
@Doomchild2XLАй бұрын
Super helpful! The thigh rotation on my Snout Spout is kinda stuck, and I don't wanna end up twisting the mushroom bit off.
@novak233Ай бұрын
Can the shoulder be disassembled?
@609collectorАй бұрын
You can pull the shoulder out of the butterfly joint. The butterfly joint doesn't come out very easily. If you do get it out it may not go back in.
@novak233Ай бұрын
@@609collector i just did...it is VERY DIFFICULT to put back in because the joint is down side of the inner peck and it does not fit in there easy...with a lot of effort i put it back in ..but i will try not to engage with it any time soon...
@forealusАй бұрын
Very happy to see this video!! Thanks for actually putting figures on the bikes. Will definitely get 1/10 for my 6in figures.
@dr_busa_nutts2 ай бұрын
i know this is an older video but thank you so damn much you just helped me make the perfect batman
@609collector2 ай бұрын
Glad I could help. Hopefully I can start making videos again soon I've just been super busy since I moved from GA to NJ. Left my collection in storage down south and haven't bought anything new in a year. Ultimately my goal was always to help people. My Instagram link should be in the description I love it when people send me pics of what they've been able to make and I'd love to see your Batman. Later
@dr_busa_nutts2 ай бұрын
@@609collector it doesnt even compete with the stuff youve got on there, this is my first time modifying a figure so its probably as good as itll get for now thanks again
@609collector2 ай бұрын
@dr_busa_nutts we all start somewhere. I started watching Craig Warrick and Glenn Webb R.I.P. . These guys are goat's
@dr_busa_nutts2 ай бұрын
@@609collector ill definitely check them out and some of your other videos next time i give it a shot
@umloucoaleatorio77133 ай бұрын
Great vídeo and great tutorial 👍
@609collector3 ай бұрын
Thanks
@jerklesirkfourthreezeronin51253 ай бұрын
i got this blue deadpool and I'm considoring customizing it into a Silver Surfer. This video is helpful in letting me know how to take it apart for painting.
@jmo133223 ай бұрын
You must be rich to take apart a $100+ figure just for kicks?
@609collector3 ай бұрын
Not for kicks but for educational purposes. I wanted to customize the figure and I wanted to share what I found. I was also able to sell the pieces to recoup the losses. I started selling mezco parts before most other people. It's how I was able to get back my money for some of the figures that had gone down in price. Suicide Squad Harley quinn was only selling for about $65 when I wanted to sell her. The parts however sold for over $120 when I took her apart. I sold the heads, body, clothes, weapons, accessories all separately and made my money back. As far as Batman is concerned there were a lot of valuable pieces there too. How would you replace a broken mezco elbow or knee joint? Some one would have to take one apart and be willing to sell the piece you need. Also I'm pretty sure I needed a replacement joint for one of my of my Deadpool figures.
@user-nd8so3mw5d3 ай бұрын
Hey, man! Do you have an idea how to disassemble the torso of this figure? I badly wanna disassemble the torso of my figure so that I can properly repaint the red and white stripes of his lower torso
@609collector3 ай бұрын
I have other videos where I crack figures open. You can check them out
@user-nd8so3mw5d3 ай бұрын
@@609collector Thanks man! I appreciate that
@legolasstudios3 ай бұрын
How can you separate that chest articulation?
@609collector3 ай бұрын
Most people crack the torso apart because it's 2 pieces of hard plastic glues together. There's a way to do it without cracking but I've only seen online once and I haven't tried it myself.
@legolasstudios3 ай бұрын
Came for the tutorial, stayed for the marvelous solo at 1:45
@bibbyshibby3 ай бұрын
If I'm not entirely mistaken the pinless joints are manufactured by a multi-casting process versus single casting and them assembly with pins. The joint gets put into another mould and then the appendage gets cast over the joint. Since it's two different materials they don't bond so it allows the joint to move freely, the only way to separate them (in my experience) is to use a razor blade and carefully slice the interior peg close to the edge - I suppose once your mods/painting is finished you could just super glue that cut piece back.
@609collector3 ай бұрын
That's diabolical. Super glue wouldn't be the most reliable but I'm sure with a tiny screw and a pinhole driller you make the superglue work and a form or reinforcement. Thanks for the comment I'll keep it in mind.
@Goddesswave3 ай бұрын
Have you ever tried removing the ankle joints and/or shoulder joints (perhaps to install different color joints for custom purposes)?
@stevenmccann28914 ай бұрын
Yeah, the torso swap is what i need to know lol
@trexslapfight4 ай бұрын
Thanks for this man. This is the starting point for me to start modding these great figures with better paint apps.
@doro6265 ай бұрын
WHen I break the pegs like that, I drill them out ( the hand drill bit holder that you turn with your wrist) , and then try to glue pegs in one side, then join them to the other. If you dont have left over plastic runners from a model kit or something then you can use toothpicks or I guess try to cut the teeth on a plastic fork down ( or plastic toothpicks if they are close in diameter). I guess if youre going to do it a lot, but styrene rods that are that diameter and cut them for length.
@doro6265 ай бұрын
On my classified the buttefly joints came out, but the pegs for the shoulder are stuck. lol. Im gogin to have to heat it again and remove teh shoulders to put the butter fly joints back in again.
@TravelatorH8r5 ай бұрын
Your wife was totally right by the way I would paint that black and on the cheek
@TravelatorH8r5 ай бұрын
Nah man some other channel said Sideshow is like 200 bucks? Are they out of their mind it looks like a Barbie doll toy. The one on the right Barbie doll toy the one on the left .....fucking action figure
@bbarber23235 ай бұрын
Great video, but the commentary needs to go. Nothing wrong with explaining things, but the singing and extra crap is seriously distracting. Not trying to be a jerk, but it’s a little annoying. Sorry.
@TheCull3165 ай бұрын
how do you take the arms and butterfly joints out of the shoulders?
@609collector5 ай бұрын
By opening the figures chest. You may be able to pull them out when they're hot but they could get damaged and not be able to be reinstalled.
@gbody26176 ай бұрын
Poor ancestor of He-Man who was named He-Bro. That cartoon could've been great if they just left out the stupid agenda crap! I watched one episode and that was all i need to see!
@gbody26176 ай бұрын
You're completely doing everything wrong. I should make a video showing you the correct way so you could have an easier time with future projects. Ill let you know but only if you're interested.
@609collector6 ай бұрын
Sure I'll totally check it out
@gbody26176 ай бұрын
@@609collector - Okay, I'll let you know when it's done.
@Alexander_UA.6 ай бұрын
And like always no one want show how hands in shoulders disable.
@609collector6 ай бұрын
Not exactly sure what you're looking for. I will say 2 things. 1. The wrist pegs in the hand pull out just like the ones in the feet. They're the simplest joints on the whole figure. As I stated one of mine broke right out of the box so I dint want to pull them out and have it fall apart. 2. If no one shows how the shoulder comes apart it's because it's not meant to. Not sure how it's sealed but that peg coming out of the shoulder is just meant for up and down motion and it allows for 360° turning, that can be seen just by looking at it. The shoulder roll motion comes from the ball peg, which I showed. I'm not sure what you're looking for or why you'd need more but some things aren't meant to come apart. If you do cut one open I'd love to see what's in there myself.
@FireDemonEditz4566 ай бұрын
I need help with mcfarlane joker infinite frontier i was moving it's feet but immediately one part of his feet breaks now i need help
@609collector6 ай бұрын
Hey, my Instagram link is in the description. Message me there, and I'll see if I can help you.
@psi-judgesanderson69836 ай бұрын
Is this compatible with a present-toys head sculpt?
@zUnknown_6 ай бұрын
Is boiling a fig with hot water directly out of the kettle safe for the fig?
@609collector6 ай бұрын
Yea
@zUnknown_6 ай бұрын
@@609collector oh thanks I'm kinda new to figure collecting.
@609collector6 ай бұрын
@zUnknown_ I use an electri. Kettle and pour the water right on top of the figures. It makes them very soft. I've even run figures under really hot tap water and got them soft enough for popping off a head or a hand. If you're planning a kit bash or a custom job inlike to boil and pop. You could use a hair dryer or a heat gun but there's a chance you could damage a figure with too much direct heat in one place.
@jarellano10146 ай бұрын
I Definitely went with Soosootoys to go with my Rogue! But I did preorder Hot Toys Wolverine go well with both of them!!
@ozymandias2k7 ай бұрын
Great video without having to drill holes or anything that damages the figure. The best techniques try to maintain integrity of the figure like yours
@trellwiggins25397 ай бұрын
Great review Bad ass Figure 👍 1 of the best gotta get this 1 in the collection
@Colt-TV7 ай бұрын
Dontou know if its very difficult to remove the caps/butterfly joints?
@609collector7 ай бұрын
It can be don't if it's super hot you might be able to pop them out but be careful you don't damage them. The most effective way would be to crack the figure open and take them out that way. I know someone online said they did it that way with 🍕 Spidey.
@Colt-TV7 ай бұрын
@@609collector appreciate the reply. I managed to get it hot enough to swap them and not warp or melt them. Trying to recreate another YTer Solar MotA custom.
@goose17528 ай бұрын
can you separate the torso from the crotch? I was thinking about giving the retro carded War Machine the modular suit repair to make it more accurate to the MvC2 art, but I don't know how possible that would be
@steventolley81358 ай бұрын
Do you have a video on how to remove the torso from the legs from the waist joint
I'm a little late to the conversation, but hopefully you can answer a question for me.. what scale motorcycles should I buy for 7 inch MCFARLANE DC multiverse, I don't want the multiverse batcycles, I want a Harley what do you think?.. 1/9 scale
@609collector9 ай бұрын
This conversation is over JK 😜 I'm honestly think you'd be hard pressed to find a motorcycle in a 1:9 scale. This in one of the only 1:10 scale bikes I've ever seen in person, and I got lucky coming across it at a flea market. I would recommend looking on google (1st for pics of what you want. 2nd to see if you can even get a bike that size. ) If you can't find a 1:9 Harley then younshould try to get your hands on a 1:10 and working from there.
@joelamel80569 ай бұрын
@@609collector thanks for your help 👍
@gokaishadow839 ай бұрын
Is it okay to use a cooking pot to put the figure in???
@609collector9 ай бұрын
I would use and old one that I don't plan on cooking with anymore. Chemicals could leech out of the plastics. Also once you've heated the water turn off the heat. You don't want action figure soup. You just need hot water don't melt your figures. The metal could get hot enough to permanently deform the plastics.
@kta_01879 ай бұрын
You are a life saver bro. My Catwoman got broke, I know how to stitch and this body will perfect for her.
@609collector9 ай бұрын
Glad I could be of service
@justinlee243510 ай бұрын
this one can put gundam?
@609collector10 ай бұрын
I think so. It was years ago so I don't know if they still make them
@justinlee243510 ай бұрын
@@609collector I plan to buy, but I think bandai action base is better this one, a bit expensive.
@youdonknowshiig10 ай бұрын
Hey can you help me mate. Recently I got marvel legends destroyer due to the joints being stiff I putted it in a ziplock and dip it in hot water not the joints is all cool. The problem is whenever I shake the figure I hear the water waving inside the torso how can I remove that excess water that keeps bugging me because of the sound like a fruitshake
@markward41310 ай бұрын
This vidoe is chocked full of alot of useful information. Unfortunately 90% of it is off camera. Please do another showing the cracking process!
@609collector10 ай бұрын
I have. I've done one recently with a motu figure but I'll do more legends soon
@philbrightman317410 ай бұрын
Wat u should do with the boots bro...take the m35 feet get the white plastic piece out of the feet then heat up the sideshow shoes and they will slot in nice like they would the original feet..👍👍
@609collector10 ай бұрын
I did something like that with superman but those feet were hollow. If I ever get this guy again I'll give it a try
@Chaucer8910 ай бұрын
Uh, what about the rest of the parts?
@609collector10 ай бұрын
I have other videos for cracking action figures. Boil and poo is for repaints and kit bashes and other minor stuff
@sahilansar792610 ай бұрын
For me the torso won’t come off
@609collector10 ай бұрын
What are you trying to do
@sahilansar792610 ай бұрын
@@609collectorI’m trying to pop of the chest bit near the butterfly’s to I can in loosen it could u please do a video it’s with retro symbiote Spider-Man
@sahilansar792610 ай бұрын
@@609collectorplease respond
@sahilansar792610 ай бұрын
@@609collectorhello? Please respond
@carmaniajcm10 ай бұрын
Thank you very much i will come back to show you my proyect i know you gonna love it
Пікірлер
Awesome and simple visual explanation! Thank you so much for your service sire 🫡
I just needed the boots. Whelp looks like im gonma be taking the whole calf if it fits on the body i plan on using
Good video. You took apart everything except the part I wanted to see. The hip. My figure fell off the balcony of a five story building, and while it landed on bushes, the leg snapped off from the hip. Its not a part that can be disassembled, but it might be possible to build a new pin to connect the upper thigh piece to the hip joint. But if it is possible to get the hip piece from NECA then I will probably be able to make the switch from watching your video. Thanks.
@@paulmitchell1099 good luck. If not neca I'm sure you can find the part somewhere
I have a Christopher Reeves with 😂 a M35 body. I'd like to know where to get my superman suit?
@davidponcedeleon1110 you'll have to find a seller that makes suits. Facebook is where I've found a lot of great customizers. Ebay may have some as well but that's sketchy. Instagram will probably have a lot as well. I got the dark blue on Facebook and it's great. The boots aren't the best but that's my only complaint. The seller makes a lot of stuff even some custom headsculpts.
sucky cam angle
There are many more videos on the channel
Avengers, Disassemble!
Super helpful! The thigh rotation on my Snout Spout is kinda stuck, and I don't wanna end up twisting the mushroom bit off.
Can the shoulder be disassembled?
You can pull the shoulder out of the butterfly joint. The butterfly joint doesn't come out very easily. If you do get it out it may not go back in.
@@609collector i just did...it is VERY DIFFICULT to put back in because the joint is down side of the inner peck and it does not fit in there easy...with a lot of effort i put it back in ..but i will try not to engage with it any time soon...
Very happy to see this video!! Thanks for actually putting figures on the bikes. Will definitely get 1/10 for my 6in figures.
i know this is an older video but thank you so damn much you just helped me make the perfect batman
Glad I could help. Hopefully I can start making videos again soon I've just been super busy since I moved from GA to NJ. Left my collection in storage down south and haven't bought anything new in a year. Ultimately my goal was always to help people. My Instagram link should be in the description I love it when people send me pics of what they've been able to make and I'd love to see your Batman. Later
@@609collector it doesnt even compete with the stuff youve got on there, this is my first time modifying a figure so its probably as good as itll get for now thanks again
@dr_busa_nutts we all start somewhere. I started watching Craig Warrick and Glenn Webb R.I.P. . These guys are goat's
@@609collector ill definitely check them out and some of your other videos next time i give it a shot
Great vídeo and great tutorial 👍
Thanks
i got this blue deadpool and I'm considoring customizing it into a Silver Surfer. This video is helpful in letting me know how to take it apart for painting.
You must be rich to take apart a $100+ figure just for kicks?
Not for kicks but for educational purposes. I wanted to customize the figure and I wanted to share what I found. I was also able to sell the pieces to recoup the losses. I started selling mezco parts before most other people. It's how I was able to get back my money for some of the figures that had gone down in price. Suicide Squad Harley quinn was only selling for about $65 when I wanted to sell her. The parts however sold for over $120 when I took her apart. I sold the heads, body, clothes, weapons, accessories all separately and made my money back. As far as Batman is concerned there were a lot of valuable pieces there too. How would you replace a broken mezco elbow or knee joint? Some one would have to take one apart and be willing to sell the piece you need. Also I'm pretty sure I needed a replacement joint for one of my of my Deadpool figures.
Hey, man! Do you have an idea how to disassemble the torso of this figure? I badly wanna disassemble the torso of my figure so that I can properly repaint the red and white stripes of his lower torso
I have other videos where I crack figures open. You can check them out
@@609collector Thanks man! I appreciate that
How can you separate that chest articulation?
Most people crack the torso apart because it's 2 pieces of hard plastic glues together. There's a way to do it without cracking but I've only seen online once and I haven't tried it myself.
Came for the tutorial, stayed for the marvelous solo at 1:45
If I'm not entirely mistaken the pinless joints are manufactured by a multi-casting process versus single casting and them assembly with pins. The joint gets put into another mould and then the appendage gets cast over the joint. Since it's two different materials they don't bond so it allows the joint to move freely, the only way to separate them (in my experience) is to use a razor blade and carefully slice the interior peg close to the edge - I suppose once your mods/painting is finished you could just super glue that cut piece back.
That's diabolical. Super glue wouldn't be the most reliable but I'm sure with a tiny screw and a pinhole driller you make the superglue work and a form or reinforcement. Thanks for the comment I'll keep it in mind.
Have you ever tried removing the ankle joints and/or shoulder joints (perhaps to install different color joints for custom purposes)?
Yeah, the torso swap is what i need to know lol
Thanks for this man. This is the starting point for me to start modding these great figures with better paint apps.
WHen I break the pegs like that, I drill them out ( the hand drill bit holder that you turn with your wrist) , and then try to glue pegs in one side, then join them to the other. If you dont have left over plastic runners from a model kit or something then you can use toothpicks or I guess try to cut the teeth on a plastic fork down ( or plastic toothpicks if they are close in diameter). I guess if youre going to do it a lot, but styrene rods that are that diameter and cut them for length.
On my classified the buttefly joints came out, but the pegs for the shoulder are stuck. lol. Im gogin to have to heat it again and remove teh shoulders to put the butter fly joints back in again.
Your wife was totally right by the way I would paint that black and on the cheek
Nah man some other channel said Sideshow is like 200 bucks? Are they out of their mind it looks like a Barbie doll toy. The one on the right Barbie doll toy the one on the left .....fucking action figure
Great video, but the commentary needs to go. Nothing wrong with explaining things, but the singing and extra crap is seriously distracting. Not trying to be a jerk, but it’s a little annoying. Sorry.
how do you take the arms and butterfly joints out of the shoulders?
By opening the figures chest. You may be able to pull them out when they're hot but they could get damaged and not be able to be reinstalled.
Poor ancestor of He-Man who was named He-Bro. That cartoon could've been great if they just left out the stupid agenda crap! I watched one episode and that was all i need to see!
You're completely doing everything wrong. I should make a video showing you the correct way so you could have an easier time with future projects. Ill let you know but only if you're interested.
Sure I'll totally check it out
@@609collector - Okay, I'll let you know when it's done.
And like always no one want show how hands in shoulders disable.
Not exactly sure what you're looking for. I will say 2 things. 1. The wrist pegs in the hand pull out just like the ones in the feet. They're the simplest joints on the whole figure. As I stated one of mine broke right out of the box so I dint want to pull them out and have it fall apart. 2. If no one shows how the shoulder comes apart it's because it's not meant to. Not sure how it's sealed but that peg coming out of the shoulder is just meant for up and down motion and it allows for 360° turning, that can be seen just by looking at it. The shoulder roll motion comes from the ball peg, which I showed. I'm not sure what you're looking for or why you'd need more but some things aren't meant to come apart. If you do cut one open I'd love to see what's in there myself.
I need help with mcfarlane joker infinite frontier i was moving it's feet but immediately one part of his feet breaks now i need help
Hey, my Instagram link is in the description. Message me there, and I'll see if I can help you.
Is this compatible with a present-toys head sculpt?
Is boiling a fig with hot water directly out of the kettle safe for the fig?
Yea
@@609collector oh thanks I'm kinda new to figure collecting.
@zUnknown_ I use an electri. Kettle and pour the water right on top of the figures. It makes them very soft. I've even run figures under really hot tap water and got them soft enough for popping off a head or a hand. If you're planning a kit bash or a custom job inlike to boil and pop. You could use a hair dryer or a heat gun but there's a chance you could damage a figure with too much direct heat in one place.
I Definitely went with Soosootoys to go with my Rogue! But I did preorder Hot Toys Wolverine go well with both of them!!
Great video without having to drill holes or anything that damages the figure. The best techniques try to maintain integrity of the figure like yours
Great review Bad ass Figure 👍 1 of the best gotta get this 1 in the collection
Dontou know if its very difficult to remove the caps/butterfly joints?
It can be don't if it's super hot you might be able to pop them out but be careful you don't damage them. The most effective way would be to crack the figure open and take them out that way. I know someone online said they did it that way with 🍕 Spidey.
@@609collector appreciate the reply. I managed to get it hot enough to swap them and not warp or melt them. Trying to recreate another YTer Solar MotA custom.
can you separate the torso from the crotch? I was thinking about giving the retro carded War Machine the modular suit repair to make it more accurate to the MvC2 art, but I don't know how possible that would be
Do you have a video on how to remove the torso from the legs from the waist joint
kzread.info/dash/bejne/eJh-0M9mh8a6fbQ.htmlsi=JzAP9mKdWPiMmfO2
Thanks for the great step by step breakdown!
Thank you.
I'm a little late to the conversation, but hopefully you can answer a question for me.. what scale motorcycles should I buy for 7 inch MCFARLANE DC multiverse, I don't want the multiverse batcycles, I want a Harley what do you think?.. 1/9 scale
This conversation is over JK 😜 I'm honestly think you'd be hard pressed to find a motorcycle in a 1:9 scale. This in one of the only 1:10 scale bikes I've ever seen in person, and I got lucky coming across it at a flea market. I would recommend looking on google (1st for pics of what you want. 2nd to see if you can even get a bike that size. ) If you can't find a 1:9 Harley then younshould try to get your hands on a 1:10 and working from there.
@@609collector thanks for your help 👍
Is it okay to use a cooking pot to put the figure in???
I would use and old one that I don't plan on cooking with anymore. Chemicals could leech out of the plastics. Also once you've heated the water turn off the heat. You don't want action figure soup. You just need hot water don't melt your figures. The metal could get hot enough to permanently deform the plastics.
You are a life saver bro. My Catwoman got broke, I know how to stitch and this body will perfect for her.
Glad I could be of service
this one can put gundam?
I think so. It was years ago so I don't know if they still make them
@@609collector I plan to buy, but I think bandai action base is better this one, a bit expensive.
Hey can you help me mate. Recently I got marvel legends destroyer due to the joints being stiff I putted it in a ziplock and dip it in hot water not the joints is all cool. The problem is whenever I shake the figure I hear the water waving inside the torso how can I remove that excess water that keeps bugging me because of the sound like a fruitshake
This vidoe is chocked full of alot of useful information. Unfortunately 90% of it is off camera. Please do another showing the cracking process!
I have. I've done one recently with a motu figure but I'll do more legends soon
Wat u should do with the boots bro...take the m35 feet get the white plastic piece out of the feet then heat up the sideshow shoes and they will slot in nice like they would the original feet..👍👍
I did something like that with superman but those feet were hollow. If I ever get this guy again I'll give it a try
Uh, what about the rest of the parts?
I have other videos for cracking action figures. Boil and poo is for repaints and kit bashes and other minor stuff
For me the torso won’t come off
What are you trying to do
@@609collectorI’m trying to pop of the chest bit near the butterfly’s to I can in loosen it could u please do a video it’s with retro symbiote Spider-Man
@@609collectorplease respond
@@609collectorhello? Please respond
Thank you very much i will come back to show you my proyect i know you gonna love it