I got that same thing i gave up and just sent it to get fixed
@angelahamilton868911 ай бұрын
Ok what if the validater isn't flashing any codes and lite is steady and won't accept any dollars?
@wowautobody11 ай бұрын
I have same problem...too..
@HeyitzATM5 ай бұрын
Same
@kittysch211 ай бұрын
Thank you
@funguyfan78919 ай бұрын
Helped me too
@terrencejii2708 Жыл бұрын
Mine continuously flashes and this is a new validator so could it be the harness??
@Myoldiesrecordings2 жыл бұрын
Any more info on 2 flashes?
@balascoamusements97462 жыл бұрын
Disabled from system
@0neluvvv232 жыл бұрын
I’m having same issue. Did you figure out what is disabling it?
@Myoldiesrecordings2 жыл бұрын
@@0neluvvv23 Yes it was a jammed drink that didn't full dispense
@Myoldiesrecordings2 жыл бұрын
To me it seem this is a very general warning that seems to have a few diffrent uses
@VSQUAD Жыл бұрын
@@0neluvvv23 my issue was the coin acceptor not having enough coins. fill it up
@saulvillarreal59402 жыл бұрын
I have a problem my bill validator doesnt accept the bills at all like if had no power but it flashes 2 times i checked and its fitted correctly and the coin stacks are half way full and i did a test on the machine and the spirals all work fine but after the test cycle of the spirals is completed it says fail on the keypad do u know what could be the problem and the solution?
@jamesmcmccray82552 жыл бұрын
Mines keep flashing 5 times and my magazine is on what do I do?
@amazingentertainment9636 Жыл бұрын
Same did you find an answer
@birdgunter489111 ай бұрын
Same
@scottwelch30713 жыл бұрын
Just installed 5 new/refurbished 2411s (4 on SMART Magic Coin cranes and 1 on a 41" Toy Chest). Each DBA gave me the same 2 flashes. Thought it might be switch #8, Always Enable/Harness Enable so I turned the crane off and tried both on and off to no avail. It was closing time, so I will have to call SMART tomorrow.
@guwpi2 жыл бұрын
Did you ever figure it out? I have the same problem with my Toy Chest cranes.
@scottwelch30712 жыл бұрын
@@guwpi It's been a couple of months, but I think the problem was each one had to be flashed with a MEI coupon. I honestly don't remember exactly, sorry.
@guwpi2 жыл бұрын
@@scottwelch3071 i figured it out! i had it on “harness enabled” instead of “always enabled”. i changed that and it started working!
@thelaundryroom3902 жыл бұрын
@@guwpi hello i was hoping u can help me out, my MEI validator flashes 2 times, and you said you changed the setting to enabled, can u please explain how you did that? Thank you
@guwpi2 жыл бұрын
@@thelaundryroom390 I think you can change setting 3 and 8 to make it work right
@AM-os2qz4 жыл бұрын
Cool
@stelthcamo3574 жыл бұрын
Where the battery mine saids low battery
@NevadaArcade5 жыл бұрын
Nice simple straight forward video. I will share with my group members on our FB group labeled " American Changer Help Group" all are welcome.
@dimpledimple58315 жыл бұрын
How to remove the jammed coins in the little parts of mei coin mech?
@jonfloyd11605 жыл бұрын
Where do you get a CPM?
@kozmaedw5 жыл бұрын
Jon Floyd any of our service partners can assist... visit www.cranepi.com / support
@TheMastersDjАй бұрын
If I don't buy a CPM will my coinmeg cease to operate? Newly bought and program and installed by a dealer repair.😊
@brianverlihay5 жыл бұрын
hi mine has failed the tube sensor test what is that thanks
@eurovending98516 жыл бұрын
Monedero mei cf7000 indica modulo superior incompatible. Como lo soluciono
@3dmedia9128 жыл бұрын
hello and thanks for the video,, i was wondering if i can reprogram the MEI bill acceptor to my city currency please feed me back ??
@cvlifornivkid13468 жыл бұрын
NEED TO KNOW MORE ABOUT THE US4 CONLUX COIN CHANGER. HOW DOES THE DOLLAR COIN SLOT WORKS?
@Tony-Plinkett Жыл бұрын
Yes... It replenishes itself, and it also pays them out if you have enough dollar coins in the tube...
Пікірлер
Can I get MEI University access?
Where can I get MEI university access?
I'm getting one flash but no obstruction
I got that same thing i gave up and just sent it to get fixed
Ok what if the validater isn't flashing any codes and lite is steady and won't accept any dollars?
I have same problem...too..
Same
Thank you
Helped me too
Mine continuously flashes and this is a new validator so could it be the harness??
Any more info on 2 flashes?
Disabled from system
I’m having same issue. Did you figure out what is disabling it?
@@0neluvvv23 Yes it was a jammed drink that didn't full dispense
To me it seem this is a very general warning that seems to have a few diffrent uses
@@0neluvvv23 my issue was the coin acceptor not having enough coins. fill it up
I have a problem my bill validator doesnt accept the bills at all like if had no power but it flashes 2 times i checked and its fitted correctly and the coin stacks are half way full and i did a test on the machine and the spirals all work fine but after the test cycle of the spirals is completed it says fail on the keypad do u know what could be the problem and the solution?
Mines keep flashing 5 times and my magazine is on what do I do?
Same did you find an answer
Same
Just installed 5 new/refurbished 2411s (4 on SMART Magic Coin cranes and 1 on a 41" Toy Chest). Each DBA gave me the same 2 flashes. Thought it might be switch #8, Always Enable/Harness Enable so I turned the crane off and tried both on and off to no avail. It was closing time, so I will have to call SMART tomorrow.
Did you ever figure it out? I have the same problem with my Toy Chest cranes.
@@guwpi It's been a couple of months, but I think the problem was each one had to be flashed with a MEI coupon. I honestly don't remember exactly, sorry.
@@scottwelch3071 i figured it out! i had it on “harness enabled” instead of “always enabled”. i changed that and it started working!
@@guwpi hello i was hoping u can help me out, my MEI validator flashes 2 times, and you said you changed the setting to enabled, can u please explain how you did that? Thank you
@@thelaundryroom390 I think you can change setting 3 and 8 to make it work right
Cool
Where the battery mine saids low battery
Nice simple straight forward video. I will share with my group members on our FB group labeled " American Changer Help Group" all are welcome.
How to remove the jammed coins in the little parts of mei coin mech?
Where do you get a CPM?
Jon Floyd any of our service partners can assist... visit www.cranepi.com / support
If I don't buy a CPM will my coinmeg cease to operate? Newly bought and program and installed by a dealer repair.😊
hi mine has failed the tube sensor test what is that thanks
Monedero mei cf7000 indica modulo superior incompatible. Como lo soluciono
hello and thanks for the video,, i was wondering if i can reprogram the MEI bill acceptor to my city currency please feed me back ??
NEED TO KNOW MORE ABOUT THE US4 CONLUX COIN CHANGER. HOW DOES THE DOLLAR COIN SLOT WORKS?
Yes... It replenishes itself, and it also pays them out if you have enough dollar coins in the tube...