Пікірлер

• 
  @user-hy9ut4bi4j2 ай бұрын

  Thanks your vid helped me get my Ducati airbag off! I like made up a tool to do the job😁

• 
  @robortkristensen38185 ай бұрын

  Best explanation on Utube

• 
  @gillanautomotivemotorhomes55055 ай бұрын

  hi . yes the bed is working and will get you out of a whole if your stuck , but its not working correctly . you have gone into programme mode . the bed designed to work without the flashing light

• 
  @owainglyndwr3334 ай бұрын

  Once you've got into programming mode how do you reset the stop positions.

• 
  @ivescazzola13123 ай бұрын

  Io ho le istruzioni sul camper appena posso mettero la procedura (Ho già fatto il tutto sul mio camper)

• 
  @dazmtb11 ай бұрын

  That’s brilliant because I need to replace the controls on my Peugeot Boxer due to the telephone button being broken! I’ve just picked the van so when I have the controls I will be tackling it 👌🏻

• 
  @neiljarvis8911 Жыл бұрын

  Thanks, this will be very useful as my horn switch is not working so will need to remove steering wheel to investigate.

• 
  @stephanemeignan2085 Жыл бұрын

  Bonjour avez-vous réussi à résoudre votre problème car il m’arrive la même chose? Merci

• 
  @jasonyoung6362 Жыл бұрын

  Very useful, thanks for sharing. I am also in the process of changing the steering wheel on a Ducato to add the the multifunction. I'm not sure what the two spare pins are on the steering column, but I suspect it's for a vehicle which does not have a harness for the multifunction wheel. The connector to the wheel is 8 pins (still trying to figure out the connector make/type, some kind of 2.5 or 2.54mm pitch with a latch), 2 pins for power to the button LED backlights (pins 3,5), a common GND for the button(pin 7), and 2 pins for the left button array and right button array (1,2). Ohter pins are N/C. The button array signal isn't digital, it's just different resistor values for each button (supported by many aftermarket head units). I'd be interested in knowing if you managed to connect the multifunction buttons and how you managed to route the additional cables down the steering column.

• 
  @kevinburgess1469 Жыл бұрын

  That's great and it has got the bed working. Something the dealership couldn't. However, for some reason after I switch the power off and on again it doesn't work so I have to go through the procedure again. Any ideas? Any help would be appreciated.

• 
  @jasongoodall86003 жыл бұрын

  hello, did you magae to get the wiring loom / cable that was missing. I have just brought a similar steering wheel with remote controls and my van has no wiring present. Can you advsie a part number or link to what you purchased?

• 
  @johnturbo77143 жыл бұрын

  Cheers nice to see the workings and clip configuration, I want to change my wheel for a leather rim wheel. Cheers 👍

• 
  @dennis.teevee3 жыл бұрын

  how do you actually remove the steering wheel? i need to change my turn signal / head light switch. thanks.

• 
  @PanamaRedEyes4 жыл бұрын

  Oh thank you my friend. You just saved the night

• 
  @javierberlanga96725 жыл бұрын

  Imbécil

• 
  @richarddear15656 жыл бұрын

  I'm considering doing this to my motorhome but do you have the relevant part numbers for the replacement multifunctional steering wheel?

• 
  @biohome54297 жыл бұрын

  Thanks for the video, have you found the cable? Is it working? Do you had to activate any option in the ECU through OBD? I'm in the same situation.

• 
  @naucott7 жыл бұрын

  Did you get the controls to work? I've only been looking for a short time but it looks like it also needs the squib/slip ring assembly.

• 
  @HerwinAcoustics7 жыл бұрын

  Thanks for the video - helped me get my airbag off today.

• 
  @kurts99728 жыл бұрын

  Hi, well it is much more simple. I see you have tried to lever the spring open. But you must turn. What it needs it a flat blade just fitting in the whole in the back of the steering.. You feel when the blade slips into or between the springs. Then gently turn by 90 degrees. It seems the AB is pulled in for a moment because of the nose shape but then it jumps out the nose. Do it the same with all 3. It does not need any force. I used a hexagon bit ca. 70mm long with flat blade. Blade as wide as the diameter of the hexagon. A small ratched to trun. No need to bend anything. If the levers of light, wiper or tempomat come in your way there is enough movement in the tire and steering to move out of their way left or right. Theft lock may activate but easy to llose with the key.

• 
  @slaynt8 жыл бұрын

  Thanks Kurt. I found that one of the springs, the one at the bottom of the wheel had more tension than the others, because it is shorter therefore you have less leverage. My next problem is how do I wire up the steering wheel remote controls to a radio? Do you know? any help would be appreciated.

• 
  @martinsydenham58358 жыл бұрын

  Very useful - thanks - I'll be doing exactly that for exactly the same reason shortly.