Пікірлер

• 
  @user-zh2nc2ru2x23 күн бұрын

  I love this bike

• 
  @gomountaintriking8460Ай бұрын

  14:31 Human, are your eyes bulletproof glass? Please use safety glasses haha 🤪😜😜

• 
  @gomountaintriking8460Ай бұрын

  6:53 Human, are your hands made of steel? Isn’t it hot?? lol 🤣🤣🤣

• 
  @flappytank7640Ай бұрын

  so cool!

• 
  @kamov8888Ай бұрын

  It looks like you created it without designing the geometry, were you able to ride this cool "thing"? Or has it become funiture?

• 
  @bentBuilderАй бұрын

  How so?

• 
  @tedvgaАй бұрын

  Can't say this not often enough. Wear safety goggles! (my father lost sight of 1 eye long ago, due to a flying metal particle of < 1 mm..)

• 
  @VacuousCatАй бұрын

  I've liked the one-sided support beam idea when I saw it in another project. But you get on bikes from the right? That's unsual.

• 
  @bentBuilderАй бұрын

  I think my logic behind getting on it from the right is because the kickstand causes the bike to lean to the left. So it has a more open and inviting appeal to it? Idk, it was my first one I've ever made and I didn't give it that much thought.

• 
  @Thib2K2 ай бұрын

  Sick build! Wondering how the steering and pedaling motion will feel since the whole crankset is going to swing with the front wheel if I understand your design correctly? Can’t wait to see it completed and rolling! New sub!

• 
  @72matyas332 ай бұрын

  Lovely build, I am inspired to show mine. Ps. For the love of God lease buy an autodimming welding helmet it is very convinient and could saves your eyes, also very nasty radiation on you skin. I had my fair share of metal work injuries, they are all avoidable.

• 
  @eugenijusjutinskas35632 ай бұрын

  Vietoi muzikos dar paleistum makstes vibratuuori.....

• 
  @viktornarbut29052 ай бұрын

  Как конструктор сядет или ляжет в этот аппарат? Ноги будут выше головы? Удобно ли так управлять байком?

• 
  @user-bz4ms8mz3o3 ай бұрын

  Так и не поехала.

• 
  @user-bz4ms8mz3o3 ай бұрын

  11:09. варил в шапке. Красит без шапки. Белой краской в чёрной майке. Чтоб совсем уж незаметны была белая краска на чёрной майке.

• 
  @pierrericard59643 ай бұрын

  Wowww

• 
  @olsonspeed3 ай бұрын

  Great job, a lot of work to build, it should fun to ride and a conversation starter wherever you travel.

• 
  @cesarcantoral61003 ай бұрын

  By the way “great work”….lol

• 
  @cesarcantoral61003 ай бұрын

  Can you make a”recumbent mountain bike at around $800-1000 $ 2 1/2 “ steel tubes….frame only….wheel size 26-29”. Both front and back fully suspended (back and front).to accommodate fat tires …underseat stirring (preferable no links …just solid welts)….disk brakes…

• 
  @kamov88883 ай бұрын

  Have you ever ridden an MBB recumbent? This seems very difficult to overcome. I'm worried that you won't be able to ride this as a FWD recumbent. I'm worried that it will became just a RWD e-motorcycle... You may risk yor life if you are not familiar with MBB. MBB low racer is very tricky at high speeds.

• 
  @Balorng3 ай бұрын

  I think it the low speeds will be trickier, given the steering geomerty, but yea - the cockpit does not seem particularly suitable for an MBB, but given that you can use motor for high-torque effort it might just work.

• 
  @kamov88883 ай бұрын

  ​​​@@Balorng If you are not trained with MBB, handle wobbles at high speed since your feet on the same moving front frame. This is very very scary.

• 
  @chasemanley8483 ай бұрын

  Careful with the pulse MIG welding, it ends up creating a cold weld with many stress risers. Always best to run a continuous bead after tacking. Stoked to see you on KZread and building cool stuff nonetheless!! Excited to see where this ends up 👍

• 
  @bentBuilder3 ай бұрын

  That's a great point to make Chase! I think with the metal being so thin and me pulsing it while the previous puddle is still hot, I can get away with it. :Knock on wood: I know I'm getting full penetration but that doesn't mean stress cracks can't or haven't formed. Time will tell. Thanks for posting

• 
  @alexal41793 ай бұрын

  На большой скорости покрышки могут увеличится в размерах и начать прорезать корпус контроллера. И да, вы часто носите шапочку с пропеллером ? :))

• 
  @MS-pt3yh3 ай бұрын

  I dont like the design and E assist motor so much. Would you try a Velomobile for the next project ?

• 
  @crazyinventor36653 ай бұрын

  It’s amazing) bro I’m want to make this , have you a draw , and parameters of tubes ?

• 
  @bentBuilder3 ай бұрын

  If I remember, I'll upload the sketch I have with the dimensions on it. As for the tubes, I used 1.5" diameter .029" wall, 4130. I have a new carbon seat coming for it, but I went with a medium Thor sport seat

• 
  @crazyinventor36653 ай бұрын

  ⁠@@bentBuilderthanks, I saw sketch, But now I’m not understanding form and place of battery , which you will use

• 
  @Asfanboy13 ай бұрын

  Now all you need is a fiber glass she'll to make it an aerodinamic bullet and you would finish the prototype that I had a dream about.

• 
  @bentBuilder3 ай бұрын

  I just might have to do that.

• 
  @yetzt3 ай бұрын

  this looks amazing, great job. i would absolutely like to ride it to see how it compares to my electric flevo bike. :)

• 
  @Therealgunslinger-3653 ай бұрын

  yet another great job !

• 
  @Oppenheimer1833 ай бұрын

  seems really cool, but also really heavy

• 
  @bentBuilder3 ай бұрын

  Thank you. I believe the frame weighs in at 10.8lbs (4.9kg). So that's what? 2-3x heavier than a regular bike frame? Total weight without batteries and with bags = 51lbs(23.1kg)

• 
  @DonaldDuck6663 ай бұрын

  yeah its hard to eccelarate but also will keep up speed easier once it goes. better have few kilos more and be more sturdy and relaible

• 
  @damianlotartaro97903 ай бұрын

  Muy linda,se ve rigida y veloz 👍

• 
  @leonardavis83033 ай бұрын

  Beautiful frame design

• 
  @yetzt3 ай бұрын

  this looks a bit like the pivot steering on a python, except the pivot point is not in line with your spine. might be tough to get it to turn. you sure you want the over seat steering though? edit: ah, i this it has positive caster, so it's more like a flevo or an airbike. i will follow your progress :)

• 
  @bentBuilder3 ай бұрын

  Pivot is inline with spine. Steering is under the seat.

• 
  @Tokazukashi3 ай бұрын

  Damn! That bike look good 😍. Especially that shape of a frame in general.

• 
  @Therealgunslinger-3653 ай бұрын

  Good job !

• 
  @MiguelMartinez-ch3tp3 ай бұрын

  El sábado empiezo a hacer lo para ir.asta.mi trabajo

• 
  @MiguelMartinez-ch3tp3 ай бұрын

  Me encantó el diseño

• 
  @user-eu2ys8zn5v4 ай бұрын

  salut ,400 euros par an pour l'eau

• 
  @keithnorton21594 ай бұрын

  Will the boom adjustment fit a 36" xseam and the battery have enough juice to get me back and forth from where we build these?

• 
  @arnspyarchi60404 ай бұрын

  first time seeing an electric assist python, i wonder how it will handle

• 
  @bentBuilder4 ай бұрын

  There's a <2 inch trail if you follow the kingpin angle so unlike a python you'll get a caster effect.

• 
  @arnspyarchi60404 ай бұрын

  @@bentBuilder thank you for the clarification, I thought it was a negative trail

• 
  @user-cj6sd6wt8j4 ай бұрын

  Any updates? I found this today, and this is first time seeing this kind of approach, and i'm really curious.

• 
  @MickB2355 ай бұрын

  Great video but seriously you need to employ more PPE when welding

• 
  @ILONGGOMANUGBONSAI19777 ай бұрын

  Good job brother that so nice and amazing... I have too

• 
  @brunorocha10737 ай бұрын

  did you give up the cargo bicycle build?

• 
  @mianmonfer7 ай бұрын

  Amazing work, thanks.

• 
  @drubradley88218 ай бұрын

  If you could come up with a posative offset rim/wheel assembly, that could eliminate that "return to center" linkage system... Putting the center line of the rim/tire assembly in line with the kingpins of the axis's of the upper and lower, would do wonders of that.. But, those spooked rims will be costly though...Just a though... Either way, this was really neat seeing the action of it flexing.. Well done..

• 
  @fraaggl8 ай бұрын

  there a re a lot of videos missing on your channel, why ? I'd love to see the rest of the build...

• 
  @jukkaelehva68138 ай бұрын

  👍👍

• 
  @calvingarrett32459 ай бұрын

  Looks good

• 
  @ILONGGOMANUGBONSAI19779 ай бұрын

  So nice great work I have too a recumbent trike

• 
  @pedalajones9 ай бұрын

  Wow!

• 
  @jonabub9 ай бұрын

  What software are you using?

• 
  @bentBuilder9 ай бұрын

  Newtek's lightwave 3d

• 
  @jonabub9 ай бұрын

  @@bentBuilder Thank you! This is awesome. Can't wait to see what comes out of it!

• 
  @keithnorton21599 ай бұрын

  Hi Jon, did this handle well?

• 
  @drubradley88218 ай бұрын

  That is a very good question, I wanna know too.. I suppose I should have asked that in my novel..LOL.. "How does it handle and what happens on an incline. This is really an interesting setup.. I am now wondering if, the center of gravity can be put super low, that it would swing the weighting, outwards to naturally force the banked lean-in... I want to build something now too.. Great question.. How does it do?

• 
  @keithnorton21599 ай бұрын

  Hi Jon, does this ride well? Would it fit a 36 xseam?

• 
  @bentBuilder9 ай бұрын

  It's my favorite ride. Yes, the boom is adjustable up to 36