Those clips are the dumbest thing ever. They rot out fuel lines and break lines.
@llandy12312 сағат бұрын
Don't forget to shimmy the flux capacitor when you do this
@WanderingScorpio16 сағат бұрын
Coffee Table for garage!
@jimmyjohnson649616 сағат бұрын
Cool. I bet it feels good. I bought a fuel line and some hose clamps, cut the leaky part off on my line, and secured the fuel line to connect it back like a bandaid. I did it cuz they kept shipping me the wrong lines and got impatient. Worked perfectly. Still holding strong after months and months. Too lazy to fix it right cuz if it aint broke dont fix it. 😭
@briansfixinstuff15 сағат бұрын
that works too in a pinch but were a shop so we fix it right
@VelocityVibeRacing22 сағат бұрын
High rpm 289 would be sick
@briansfixinstuff17 сағат бұрын
we have like 5-6 other 289's already sitting around at the farm.
@dylantechКүн бұрын
The best part about that song is Elton John pretending to be straight.
@justincap6507Күн бұрын
Just use scan tool like a real mechanic bro so much just to risk it all like this why
@briansfixinstuffКүн бұрын
@@justincap6507 ain’t risking nothing
@user-ug4xm1qe6uКүн бұрын
😮💥💥🤣🤣🤣🤣🤣🤣🤣😳💥🤣🤣🤣🤣is that the pad the wrong way
@briansfixinstuffКүн бұрын
no its the pad worn to nothing just the steel left
@rideordie3305Күн бұрын
Exactly what i started doing. I still use my scan tool sometimes.
@briansfixinstuffКүн бұрын
this one wasnt happy when i was done had all kinds of brake codes even one for fluid loss.. cleared codes and it was fine.. i couldnt get it to take the brake service mode and my scan tool didnt list one in the option when i went it to try it with that..
@johnscholl83912 күн бұрын
Dang, i wonder what caused this failure
@briansfixinstuff2 күн бұрын
especially when it was changed just over a year ago. parts quality has gone way down since the big flu...
@njsentinel87522 күн бұрын
What type of refrigerant? Ammonia? 😂😂😂 J/k bro. I see the fittings. Rock on 🤟🤟🤟
@briansfixinstuff2 күн бұрын
😂😂
@futueplays40512 күн бұрын
budddddddddddddyy, you need more then a new belt
@briansfixinstuff2 күн бұрын
yea it has a good oil leak.. but they only wanna fix whats broken right now
@logancrawford84542 күн бұрын
any recommendations on what the hell to do when that bolt won't come out of the junction box that connects the hose and lines over the rear diff? it started off tight and slowly came loose and then just spins but won't come up.
@briansfixinstuff2 күн бұрын
are you talking about the axle vent bolt? that holds the brake hose to the axle?
@logancrawford84542 күн бұрын
@@briansfixinstuff no the bolt thats holding the junction box up on the diff. You know you have the thick hose and its attached to that junction box and then the other brake lines run to that same junction box.
@logancrawford84542 күн бұрын
@@briansfixinstuff5 seconds into the video then paise it. That silver junction box up there. Mine has a bolt on the back with a plate that holds it to the diff. I couldnt see if yours did too but that bolt on it dont come out to change that junction box lol
@briansfixinstuff2 күн бұрын
@@logancrawford8454 id try to get under it with a pry bar or something thin and pry it up while spinning the bolt.. sounds like it stripped out and you might have to put a helicoil in once you get it out
@logancrawford84542 күн бұрын
@@briansfixinstuff im bout to burn the truck 😂 Still cant get it out and cant cut it out. On a normal vehicle itd be a vent valve but on this one its just a 1/2in bolt and its causing me a lot more ache than it should.
@2StallGarage3 күн бұрын
Keep up the good work
@FreeMoney-133 күн бұрын
It's called a truck for a reason. Throw some mud on it call it good
@chicharito4173 күн бұрын
a 2 door charger?
@VladmirVorkeshky3 күн бұрын
New Dodge Charger, EV or i6 Hurricane. Probably i6
@paulg42823 күн бұрын
❤ some sort g m Opel vauxhall just remember putting bits in location sort of when's was bit spotty and young smelly as for him no your not a followering me to toliet
@paulg42823 күн бұрын
❤ what some sort engine mounting
@briansfixinstuff3 күн бұрын
No the sway bar to frame Mount customer hit curb and one of the bolts snapped off
@user-gk6qs5vg6s3 күн бұрын
Turd
@briansfixinstuff3 күн бұрын
wheres ur turd.. you dont even have a video on your channel im in michigan bring your shit out
@holdenb34034 күн бұрын
Damn bro that’s was slow as shit
@briansfixinstuff4 күн бұрын
@@holdenb3403 🤣🤣 it’s really not
@rc-t3k4 күн бұрын
Is that the electric Camaro
@boiiifudont13684 күн бұрын
No it’s the new dodge charger EV, or the V6 i can’t really see the badge but it’s a 2025
@briansfixinstuff4 күн бұрын
@@boiiifudont1368 your right now that i think about it forgot what it looked like sorry for crappy video
@johnscholl83914 күн бұрын
What a beaut
@briansfixinstuff4 күн бұрын
thank you every time i drive the thing everyone drools
@Lancemechanics4 күн бұрын
songs gunna be in my head all weekend now! :P
@RVGP-AMOR4 күн бұрын
I use the knuckle as leverage to pull out the bearings.
@user-vh2fw9hu3b4 күн бұрын
GM. primitive 😑
@leviemmons21505 күн бұрын
Ill take iy
@deathdrummer10195 күн бұрын
Id turn it into a teardown table that would be dope
@BastardX135 күн бұрын
Ain't no boat anchor. That's Bonafide American History ready for rebirth.
@briansfixinstuff5 күн бұрын
here you go its not gone kzread.infog0LnPnH_sFk?si=NHPhjuzixxNueuJM
@simplenipple6 күн бұрын
Customer coming back in a year with that engine
@johnscholl83916 күн бұрын
Yikes, nice catch man
@briansfixinstuff6 күн бұрын
this motor is still sitting around in the shop.. ill try to remember to get another shot of it
@johnscholl83916 күн бұрын
Looks good man
@briansfixinstuff6 күн бұрын
thanks!
@rd468magnum6 күн бұрын
Hiw many ford foundry techs initials are on it ...I tell you ..K.D.
@briansfixinstuff6 күн бұрын
its still sitting around.. i didnt know calling it a boat anchor was gonna hit so many souls
@zacharyharris4387 күн бұрын
Parts changer.....
@toob2476 күн бұрын
Yeah youre right he should have fabricated one. Or was changing the part the way to go😅
@briansfixinstuff6 күн бұрын
Yea that’s all I do change parts
@johnscholl83917 күн бұрын
I love your music taste bro. Keep it up!
@briansfixinstuff7 күн бұрын
@@johnscholl8391 nothing like some good classic jams
@xsqed7 күн бұрын
Nice one of them on my 2000 zx3 is broke off only one side works
@briansfixinstuff7 күн бұрын
if one side is broke the sway bar system is inop you need both links hooked up
@xsqed7 күн бұрын
@@briansfixinstuff thanks I need to get some asap
@briansfixinstuff7 күн бұрын
It’s an oe hose the suspension is hanging so it won’t go any lower
@davidkerns54137 күн бұрын
Your rubber brake line looks like it's gonna come up short
@BillyStewart-qd1ch7 күн бұрын
Yes sir love you sir
@alicelik90279 күн бұрын
Motorun içine sıçmışlar
@JakeFriesen-qz6gz10 күн бұрын
Or learning tool for kids
@briansfixinstuff9 күн бұрын
you cant please everyone.. i never said it was being junked i just called it a boat anchor because its locked up and its getting a new engine..
@moo399310 күн бұрын
I ordered that exact same o ring kit off of Amazon too lol. Lifesaver.
@yaboydonosp10 күн бұрын
Don’t forget to connect that cold air intake
@briansfixinstuff10 күн бұрын
@@yaboydonosp that is temporary to keep critters out
@davidbrontoburger696211 күн бұрын
Boat anchor, I'll take that anchor of your hands, simple man
@AffectionateGolfCart-wv3if11 күн бұрын
Don’t boat anchor that!!!
@donnalins278711 күн бұрын
Bob Seger ... love him ... One of his much loved songs ... I don't get the O rings though. ??? Still ... Bob Seger ❤❤❤
@grumblycurmudgeon11 күн бұрын
And this years award for "Video Quite Literally Nobody Else On Earth Gives a Shit About" goes to...
Пікірлер
Those clips are the dumbest thing ever. They rot out fuel lines and break lines.
Don't forget to shimmy the flux capacitor when you do this
Coffee Table for garage!
Cool. I bet it feels good. I bought a fuel line and some hose clamps, cut the leaky part off on my line, and secured the fuel line to connect it back like a bandaid. I did it cuz they kept shipping me the wrong lines and got impatient. Worked perfectly. Still holding strong after months and months. Too lazy to fix it right cuz if it aint broke dont fix it. 😭
that works too in a pinch but were a shop so we fix it right
High rpm 289 would be sick
we have like 5-6 other 289's already sitting around at the farm.
The best part about that song is Elton John pretending to be straight.
Just use scan tool like a real mechanic bro so much just to risk it all like this why
@@justincap6507 ain’t risking nothing
😮💥💥🤣🤣🤣🤣🤣🤣🤣😳💥🤣🤣🤣🤣is that the pad the wrong way
no its the pad worn to nothing just the steel left
Exactly what i started doing. I still use my scan tool sometimes.
this one wasnt happy when i was done had all kinds of brake codes even one for fluid loss.. cleared codes and it was fine.. i couldnt get it to take the brake service mode and my scan tool didnt list one in the option when i went it to try it with that..
Dang, i wonder what caused this failure
especially when it was changed just over a year ago. parts quality has gone way down since the big flu...
What type of refrigerant? Ammonia? 😂😂😂 J/k bro. I see the fittings. Rock on 🤟🤟🤟
😂😂
budddddddddddddyy, you need more then a new belt
yea it has a good oil leak.. but they only wanna fix whats broken right now
any recommendations on what the hell to do when that bolt won't come out of the junction box that connects the hose and lines over the rear diff? it started off tight and slowly came loose and then just spins but won't come up.
are you talking about the axle vent bolt? that holds the brake hose to the axle?
@@briansfixinstuff no the bolt thats holding the junction box up on the diff. You know you have the thick hose and its attached to that junction box and then the other brake lines run to that same junction box.
@@briansfixinstuff5 seconds into the video then paise it. That silver junction box up there. Mine has a bolt on the back with a plate that holds it to the diff. I couldnt see if yours did too but that bolt on it dont come out to change that junction box lol
@@logancrawford8454 id try to get under it with a pry bar or something thin and pry it up while spinning the bolt.. sounds like it stripped out and you might have to put a helicoil in once you get it out
@@briansfixinstuff im bout to burn the truck 😂 Still cant get it out and cant cut it out. On a normal vehicle itd be a vent valve but on this one its just a 1/2in bolt and its causing me a lot more ache than it should.
Keep up the good work
It's called a truck for a reason. Throw some mud on it call it good
a 2 door charger?
New Dodge Charger, EV or i6 Hurricane. Probably i6
❤ some sort g m Opel vauxhall just remember putting bits in location sort of when's was bit spotty and young smelly as for him no your not a followering me to toliet
❤ what some sort engine mounting
No the sway bar to frame Mount customer hit curb and one of the bolts snapped off
Turd
wheres ur turd.. you dont even have a video on your channel im in michigan bring your shit out
Damn bro that’s was slow as shit
@@holdenb3403 🤣🤣 it’s really not
Is that the electric Camaro
No it’s the new dodge charger EV, or the V6 i can’t really see the badge but it’s a 2025
@@boiiifudont1368 your right now that i think about it forgot what it looked like sorry for crappy video
What a beaut
thank you every time i drive the thing everyone drools
songs gunna be in my head all weekend now! :P
I use the knuckle as leverage to pull out the bearings.
GM. primitive 😑
Ill take iy
Id turn it into a teardown table that would be dope
Ain't no boat anchor. That's Bonafide American History ready for rebirth.
here you go its not gone kzread.infog0LnPnH_sFk?si=NHPhjuzixxNueuJM
Customer coming back in a year with that engine
Yikes, nice catch man
this motor is still sitting around in the shop.. ill try to remember to get another shot of it
Looks good man
thanks!
Hiw many ford foundry techs initials are on it ...I tell you ..K.D.
its still sitting around.. i didnt know calling it a boat anchor was gonna hit so many souls
Parts changer.....
Yeah youre right he should have fabricated one. Or was changing the part the way to go😅
Yea that’s all I do change parts
I love your music taste bro. Keep it up!
@@johnscholl8391 nothing like some good classic jams
Nice one of them on my 2000 zx3 is broke off only one side works
if one side is broke the sway bar system is inop you need both links hooked up
@@briansfixinstuff thanks I need to get some asap
It’s an oe hose the suspension is hanging so it won’t go any lower
Your rubber brake line looks like it's gonna come up short
Yes sir love you sir
Motorun içine sıçmışlar
Or learning tool for kids
you cant please everyone.. i never said it was being junked i just called it a boat anchor because its locked up and its getting a new engine..
I ordered that exact same o ring kit off of Amazon too lol. Lifesaver.
Don’t forget to connect that cold air intake
@@yaboydonosp that is temporary to keep critters out
Boat anchor, I'll take that anchor of your hands, simple man
Don’t boat anchor that!!!
Bob Seger ... love him ... One of his much loved songs ... I don't get the O rings though. ??? Still ... Bob Seger ❤❤❤
And this years award for "Video Quite Literally Nobody Else On Earth Gives a Shit About" goes to...
ill send you a virtual cookie enjoy!!!🍪🍪🍪
Clean it up & build a 302 from it!
dont have anything to stick it in..