Now all I need to do is find a replacement Sunroof. Cheers ✌️☘️
@markwalker52953 күн бұрын
I need a copy of that manual. Do you know where I could get one? Excellent Vid!
@CarlosPeralez-z6o25 күн бұрын
How about the front cam seal how would you replace that one if its ok if i can ask?
@NillsonValmond-qo1feАй бұрын
I'm looking to get a Montero. How where can I get my hands on a service manual?
@robbwellsАй бұрын
Awesome thank you
@TheQuidditchfanАй бұрын
One word, lockers. They will make your rigs much more capable.
@white_dodgeАй бұрын
how much transmission fluid do you add and does universal type work if i cant get any sp3 or sp2
@alexandermorris84202 ай бұрын
Just discovered you guys. I have a 2004 Shogun.
@17thegoat872 ай бұрын
Would the location be the same on a 3.0l?
@johnnynunez44773 ай бұрын
I've taken my Mitsubishi apart three times trying this O-ring and then sprayed carburetor cleaner and it's still bogging out has anyone succeeded if so maybe I'm doing something wrong I've lubricated the O-ring put it back together still leaking??????
@owen_03montero3 ай бұрын
Are you using a correct fit o ring? Also is your plastic end piece damaged?
@johnnynunez44773 ай бұрын
@@owen_03montero yes on the right O-ring the plastic is not damaged not sure what's wrong I'm planning on trying again just to be sure I'm going back to harbor freight to pick up another O-ring set I will keep you posted thank you maybe
@johnnynunez4477Ай бұрын
I think maybe I used to much grease I'm thinking the grease is causing the air through I'm going to take it apart one more time hoping that's the issue let you know what happens thank you
@johnnynunez44773 ай бұрын
Okay I tried this O-ring then put everything together ran the Montero came back sprayed the aria again the engine started stalling so for some reason the O-ring isn't working on my Montero what do you think i did wrong?
@johncalhoun6373 ай бұрын
Another thank you for this, Long term fuel trims dropped from 12.5 to zero. Of course I did spark plugs ans wires while I was in there and kinda wish I'd done valve cover gaskets, but car runs bbetter than it has in a long time.
@owenmccord50783 ай бұрын
Ooooooh!
@owen_03montero3 ай бұрын
If interested it’s on auction on eBay or message me can buy it directly
@johnnynunez44774 ай бұрын
What are the torque specs after replacing the intake
@keaaul8085 ай бұрын
Great video! Another very stupid design by engineers hating mechanics!! Remove x-member just to change filter??? Some just as bad pan designs don’t even include drain plugs!!!🙄
@Wayno776665 ай бұрын
Cheers for the video, been having a leak for a while, swapped every vac hose lo and behold it was this. Will be swapping the o ring this week. Attempting the rocker cover seals this week for a roadworthiness check.
@jamessel64306 ай бұрын
Thanks man for the simple video. I was wondering if that seal was a pressed in on or just an O'ring
@user-rl2gc4jg1n7 ай бұрын
Did you have any luck finding those torque specs?
@rogertiamzon77187 ай бұрын
Nice mits pajero
@rogertiamzon77187 ай бұрын
Ilove pajero
@babyfro34307 ай бұрын
Would also love to ride out with you guys one day if you guys ever come to Missouri
@babyfro34307 ай бұрын
What do you guys run in them I'm trying to turn my 3rd gen into a offroad beast lol😂 but I got a front locker on the way and a rear locker next year
@M0745038 ай бұрын
when loosening the power steering belt.. it cracked the flange... where the bolt sits on. hopefully i can find a replacement
@no1nozy8 ай бұрын
Owen,, great vid! Jimmi Dalton here...i left fb 3yrs ago, miss you guys from MMUSA! Still have both my 88' and 00' beach rigs. Say hi to the guys for me.
@andyfish35068 ай бұрын
Great job Owen! Let's plan another trip in January 😀
@truckwalaOfficial8 ай бұрын
Hi there, very informative video, can I ask where did you get the sunroof from please, looking forward
@harkoroffroader81299 ай бұрын
👍👍👍
@chillplacatetrance92139 ай бұрын
How many owns 5D56 and 4M40 engines in this video?
@S44BBOI9 ай бұрын
Do you know the part number for the actual metal piece?
@premaratne24710 ай бұрын
Nice video.I have a 2001 montero xls and have a question. I recently changed the power steering fluid with "Prestone Power Steering Fluid Plus Stop Leak". I also saw online that some owners use "Valvoline MaxLife Multi-Vehicle Full Synthetic Automatic Transmission Fluid ". Do need to change the P/S fluid again or keep the one that I already used? Thanks.
@scottevans875611 ай бұрын
Your Montero looks great! Thanks for the vids!
@JHD90711 ай бұрын
Just took my 2003 in for a diagnostic for p0171. They told me it’s probably an intake manifold tuning valve. Does that seem reasonable or would you think that this o-ring might be the root of the issue?
@owen_03montero11 ай бұрын
Smoke test it and you’ll see or spray with something
@chiragjobanputra111 ай бұрын
Lots of respect from a Pajero lover from India
@LekkerMonty11 ай бұрын
Great video as always Owen. I'm about to change my Gen 2.5 trans mount this weekend. Since I am not changing the filter I thought I would support the transmission with a 2x4 and floor jack spreading the load across the pan. I can't really see in the video where you have the transmission supported with the jack while the mount is off. I'm looking in the FSM as well. . Where in the video is a good shot of the where the jack pad is supporting the transmission?
@owen_03montero11 ай бұрын
At the back of the transmission/tcase there is a little spot where you can support it with a jack. Hard to miss it it’s a square spot I believe
@THEARS0N1ST Жыл бұрын
about to tackle a 2002 Mitsubishi Montero Sport this video was incredibly helpful thanks Owen.
@altermode Жыл бұрын
Hey @Owen Montero, how much better is having the rear locking diff for these sorts of trail rides? What is an ideal lift also? 2" lift? I love watching all the different years of trucks 🤘
@kmx509 Жыл бұрын
You have a very rare, optioned Montero. The front bumper on your Montero (We had it on ours) Was a factory catalog Mitsubishi part that you could buy from Mitsubishi. Very rare to see them with the bumpers.
@EricF-qu8qb Жыл бұрын
Hey I have a montero how to I become a part of this group?
@owen_03montero Жыл бұрын
Socal Mitsubishi montero Facebook group
@conservethelight4968 Жыл бұрын
I need a mechanic for my 1990 mitsubishi montero,
@owen_03montero Жыл бұрын
Ozzys automotive in bell gardens
@conservethelight4968 Жыл бұрын
Thank you!
@altermode Жыл бұрын
Owen what sealant did you use to mount the water pump? Also did you buy an OEM crank sensor or just one off Amazon/ebay? Any other sealants/rtv that you used? I'm gonna do mine in the next week or two. This video is so much help. Thanks! 🤙
@owen_03montero Жыл бұрын
Used a skin coat of gray rtv. Also for the crank sensor only get Oem the aftermarket are really bad. No other sealants used just gray rtv a very thin layer skinned
@altermode Жыл бұрын
@@owen_03montero Awesome thanks!!! I agree, I'll get the OEM 😎
@iamasmurf1122 Жыл бұрын
nice clean job , i just did similar here in Australia , i found these things a little difficult, i know straight forward , for me the job was a struggle, its all about the detail this job
@rafaelmorenoparker4939 Жыл бұрын
Man I swear to god some people don’t know anything about the dimensions of there vehicles much less four wheeling. Nice rigs but come on man use the long pedal every now and then.
@daltonglandon591 Жыл бұрын
What armored bumper is that on the all silver gen 3? Just picked up a 20th ann and doing the lift today
@allanbrogdon3078 Жыл бұрын
I just made a gasket where the camshaft thrust plug meets the head. I had trouble getting the o ring so I used a cereal box it works. Now for the driver side.
@wilfredodiazrosado7700 Жыл бұрын
Excellent Job I have a Montero 1999 3.0
@orozco8104 Жыл бұрын
Awesome vid, ty Owen. Btw, what size clips are needed for the interior? I'm tackling this project soon myself
@melol00 Жыл бұрын
Owen thank you for the video! Unfortunately, I ruined the orange plastic piece trying to get back inside the manifold. Been looking for a place to order a replacement but having difficulty. Any tips? Thx!
@owen_03montero Жыл бұрын
Sadly that’s the issue is Mitsubishi doesn’t sell that part separately. They want people to replace the whole lower plenum. Might have luck finding one at the junkyard or online
@allanbrogdon9372 Жыл бұрын
The crankshaft turns twice for every turn of the camshaft. The timing marks on the crankshaft will move farther making it look like it's off .
@allanbrogdon3078 Жыл бұрын
Thanks I just bought a 2000 and doing the harmonic balancer bolt and pulley and lower timing gear. I noticed how much oil was leaking and followed it to the plug.
Пікірлер
Now all I need to do is find a replacement Sunroof. Cheers ✌️☘️
I need a copy of that manual. Do you know where I could get one? Excellent Vid!
How about the front cam seal how would you replace that one if its ok if i can ask?
I'm looking to get a Montero. How where can I get my hands on a service manual?
Awesome thank you
One word, lockers. They will make your rigs much more capable.
how much transmission fluid do you add and does universal type work if i cant get any sp3 or sp2
Just discovered you guys. I have a 2004 Shogun.
Would the location be the same on a 3.0l?
I've taken my Mitsubishi apart three times trying this O-ring and then sprayed carburetor cleaner and it's still bogging out has anyone succeeded if so maybe I'm doing something wrong I've lubricated the O-ring put it back together still leaking??????
Are you using a correct fit o ring? Also is your plastic end piece damaged?
@@owen_03montero yes on the right O-ring the plastic is not damaged not sure what's wrong I'm planning on trying again just to be sure I'm going back to harbor freight to pick up another O-ring set I will keep you posted thank you maybe
I think maybe I used to much grease I'm thinking the grease is causing the air through I'm going to take it apart one more time hoping that's the issue let you know what happens thank you
Okay I tried this O-ring then put everything together ran the Montero came back sprayed the aria again the engine started stalling so for some reason the O-ring isn't working on my Montero what do you think i did wrong?
Another thank you for this, Long term fuel trims dropped from 12.5 to zero. Of course I did spark plugs ans wires while I was in there and kinda wish I'd done valve cover gaskets, but car runs bbetter than it has in a long time.
Ooooooh!
If interested it’s on auction on eBay or message me can buy it directly
What are the torque specs after replacing the intake
Great video! Another very stupid design by engineers hating mechanics!! Remove x-member just to change filter??? Some just as bad pan designs don’t even include drain plugs!!!🙄
Cheers for the video, been having a leak for a while, swapped every vac hose lo and behold it was this. Will be swapping the o ring this week. Attempting the rocker cover seals this week for a roadworthiness check.
Thanks man for the simple video. I was wondering if that seal was a pressed in on or just an O'ring
Did you have any luck finding those torque specs?
Nice mits pajero
Ilove pajero
Would also love to ride out with you guys one day if you guys ever come to Missouri
What do you guys run in them I'm trying to turn my 3rd gen into a offroad beast lol😂 but I got a front locker on the way and a rear locker next year
when loosening the power steering belt.. it cracked the flange... where the bolt sits on. hopefully i can find a replacement
Owen,, great vid! Jimmi Dalton here...i left fb 3yrs ago, miss you guys from MMUSA! Still have both my 88' and 00' beach rigs. Say hi to the guys for me.
Great job Owen! Let's plan another trip in January 😀
Hi there, very informative video, can I ask where did you get the sunroof from please, looking forward
👍👍👍
How many owns 5D56 and 4M40 engines in this video?
Do you know the part number for the actual metal piece?
Nice video.I have a 2001 montero xls and have a question. I recently changed the power steering fluid with "Prestone Power Steering Fluid Plus Stop Leak". I also saw online that some owners use "Valvoline MaxLife Multi-Vehicle Full Synthetic Automatic Transmission Fluid ". Do need to change the P/S fluid again or keep the one that I already used? Thanks.
Your Montero looks great! Thanks for the vids!
Just took my 2003 in for a diagnostic for p0171. They told me it’s probably an intake manifold tuning valve. Does that seem reasonable or would you think that this o-ring might be the root of the issue?
Smoke test it and you’ll see or spray with something
Lots of respect from a Pajero lover from India
Great video as always Owen. I'm about to change my Gen 2.5 trans mount this weekend. Since I am not changing the filter I thought I would support the transmission with a 2x4 and floor jack spreading the load across the pan. I can't really see in the video where you have the transmission supported with the jack while the mount is off. I'm looking in the FSM as well. . Where in the video is a good shot of the where the jack pad is supporting the transmission?
At the back of the transmission/tcase there is a little spot where you can support it with a jack. Hard to miss it it’s a square spot I believe
about to tackle a 2002 Mitsubishi Montero Sport this video was incredibly helpful thanks Owen.
Hey @Owen Montero, how much better is having the rear locking diff for these sorts of trail rides? What is an ideal lift also? 2" lift? I love watching all the different years of trucks 🤘
You have a very rare, optioned Montero. The front bumper on your Montero (We had it on ours) Was a factory catalog Mitsubishi part that you could buy from Mitsubishi. Very rare to see them with the bumpers.
Hey I have a montero how to I become a part of this group?
Socal Mitsubishi montero Facebook group
I need a mechanic for my 1990 mitsubishi montero,
Ozzys automotive in bell gardens
Thank you!
Owen what sealant did you use to mount the water pump? Also did you buy an OEM crank sensor or just one off Amazon/ebay? Any other sealants/rtv that you used? I'm gonna do mine in the next week or two. This video is so much help. Thanks! 🤙
Used a skin coat of gray rtv. Also for the crank sensor only get Oem the aftermarket are really bad. No other sealants used just gray rtv a very thin layer skinned
@@owen_03montero Awesome thanks!!! I agree, I'll get the OEM 😎
nice clean job , i just did similar here in Australia , i found these things a little difficult, i know straight forward , for me the job was a struggle, its all about the detail this job
Man I swear to god some people don’t know anything about the dimensions of there vehicles much less four wheeling. Nice rigs but come on man use the long pedal every now and then.
What armored bumper is that on the all silver gen 3? Just picked up a 20th ann and doing the lift today
I just made a gasket where the camshaft thrust plug meets the head. I had trouble getting the o ring so I used a cereal box it works. Now for the driver side.
Excellent Job I have a Montero 1999 3.0
Awesome vid, ty Owen. Btw, what size clips are needed for the interior? I'm tackling this project soon myself
Owen thank you for the video! Unfortunately, I ruined the orange plastic piece trying to get back inside the manifold. Been looking for a place to order a replacement but having difficulty. Any tips? Thx!
Sadly that’s the issue is Mitsubishi doesn’t sell that part separately. They want people to replace the whole lower plenum. Might have luck finding one at the junkyard or online
The crankshaft turns twice for every turn of the camshaft. The timing marks on the crankshaft will move farther making it look like it's off .
Thanks I just bought a 2000 and doing the harmonic balancer bolt and pulley and lower timing gear. I noticed how much oil was leaking and followed it to the plug.
When’s the next Montero trip out there?